[PATCH] iio: imu: st_lsm6dsx: move max_fifo_size in st_lsm6dsx_fifo_ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch does not introduce any logic change, just small code
rearrangement.

Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  4 ++--
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 16 +++++++++-------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 5ef55763a6cc..6ac4eac36458 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -143,6 +143,7 @@ struct st_lsm6dsx_fs_table_entry {
  * @read_fifo: Read FIFO callback.
  * @fifo_th: FIFO threshold register info (addr + mask).
  * @fifo_diff: FIFO diff status register info (addr + mask).
+ * @max_size: Sensor max fifo length in FIFO words.
  * @th_wl: FIFO threshold word length.
  */
 struct st_lsm6dsx_fifo_ops {
@@ -156,6 +157,7 @@ struct st_lsm6dsx_fifo_ops {
 		u8 addr;
 		u16 mask;
 	} fifo_diff;
+	u16 max_size;
 	u8 th_wl;
 };
 
@@ -271,7 +273,6 @@ struct st_lsm6dsx_ext_dev_settings {
  * @reset: register address for reset.
  * @boot: register address for boot.
  * @bdu: register address for Block Data Update.
- * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
  * @channels: IIO channels supported by the device.
  * @irq_config: interrupts related registers.
@@ -288,7 +289,6 @@ struct st_lsm6dsx_settings {
 	struct st_lsm6dsx_reg reset;
 	struct st_lsm6dsx_reg boot;
 	struct st_lsm6dsx_reg bdu;
-	u16 max_fifo_size;
 	struct {
 		enum st_lsm6dsx_hw_id hw_id;
 		const char *name;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index db45f1fc0b81..0f54df85134a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -102,7 +102,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x22,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 32,
 		.id = {
 			{
 				.hw_id = ST_LSM9DS1_ID,
@@ -194,6 +193,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = BIT(4),
 			},
 		},
+		.fifo_ops = {
+			.max_size = 32,
+		},
 	},
 	{
 		.reset = {
@@ -208,7 +210,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x12,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 1365,
 		.id = {
 			{
 				.hw_id = ST_LSM6DS3_ID,
@@ -329,6 +330,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x3a,
 				.mask = GENMASK(11, 0),
 			},
+			.max_size = 1365,
 			.th_wl = 3, /* 1LSB = 2B */
 		},
 		.ts_settings = {
@@ -374,7 +376,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x12,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 682,
 		.id = {
 			{
 				.hw_id = ST_LSM6DS3H_ID,
@@ -495,6 +496,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x3a,
 				.mask = GENMASK(11, 0),
 			},
+			.max_size = 682,
 			.th_wl = 3, /* 1LSB = 2B */
 		},
 		.ts_settings = {
@@ -540,7 +542,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x12,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 682,
 		.id = {
 			{
 				.hw_id = ST_LSM6DSL_ID,
@@ -677,6 +678,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x3a,
 				.mask = GENMASK(10, 0),
 			},
+			.max_size = 682,
 			.th_wl = 3, /* 1LSB = 2B */
 		},
 		.ts_settings = {
@@ -759,7 +761,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x12,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 512,
 		.id = {
 			{
 				.hw_id = ST_LSM6DSR_ID,
@@ -910,6 +911,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x3a,
 				.mask = GENMASK(9, 0),
 			},
+			.max_size = 512,
 			.th_wl = 1,
 		},
 		.ts_settings = {
@@ -984,7 +986,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.addr = 0x12,
 			.mask = BIT(6),
 		},
-		.max_fifo_size = 512,
 		.id = {
 			{
 				.hw_id = ST_ASM330LHH_ID,
@@ -1119,6 +1120,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x3a,
 				.mask = GENMASK(9, 0),
 			},
+			.max_size = 512,
 			.th_wl = 1,
 		},
 		.ts_settings = {
@@ -1603,7 +1605,7 @@ int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int err;
 
-	if (val < 1 || val > hw->settings->max_fifo_size)
+	if (val < 1 || val > hw->settings->fifo_ops.max_size)
 		return -EINVAL;
 
 	mutex_lock(&hw->conf_lock);
-- 
2.31.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux