Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding SPI IDs for parts that
only have a compatible listed.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/iio/pressure/st_pressure_spi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 9b2523c5bc94..d6fc954e28f8 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -97,6 +97,10 @@ static const struct spi_device_id st_press_id_table[] = {
{ LPS33HW_PRESS_DEV_NAME },
{ LPS35HW_PRESS_DEV_NAME },
{ LPS22HH_PRESS_DEV_NAME },
+ { "lps001wp-press" },
+ { "lps25h-press", },
+ { "lps331ap-press" },
+ { "lps22hb-press" },
{},
};
MODULE_DEVICE_TABLE(spi, st_press_id_table);
--
2.20.1
