Linux GPIO
[Prev Page][Next Page]
- Re: [PATCH RESEND 1/2] dt-bindings: pinctrl: mediatek: mt7622: fix array properties, (continued)
- [PATCH] gpio: vf610: always set GPIO to input mode when used as interrupt source,
haibo . chen
- [brgl:gpio/for-current 1/1] drivers/gpio/gpio-tegra186.c:189:14: warning: 'or' of unmatched not-equal tests is always 1, kernel test robot
- [questions] : gpiolib and gpioset behaviour,
Gilles BULOZ
- [PATCH] pinctrl: bcm2835: Make pin freeing behavior configurable,
Stefan Wahren
- [PATCH v2] gpio-syscon: do not report bogus error,
Etienne Buira
- [PATCH] gpio: Add Intel Granite Rapids-D vGPIO driver,
Aapo Vienamo
- [PATCH v4] pinctrl: renesas: rzg2l: Configure the interrupt type on resume,
Claudiu
- [PATCH v3] pinctrl: renesas: rzg2l: Configure the interrupt type on resume,
Claudiu
- [GIT PULL] gpio: fixes for v6.9-rc5,
Bartosz Golaszewski
- [PATCH v6 00/11] Turris Omnia MCU driver,
Marek Behún
- [PATCH v2 resend] pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map(),
Zeng Heng
- Advice on using gpio-brcmstb with gpio-ranges,
Phil Elwell
- [PATCH v2] pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map(),
Zeng Heng
- [brgl:gpio/for-current] BUILD SUCCESS 69ffed4b62523bbc85511f150500329d28aba356, kernel test robot
- [brgl:gpio/for-next] BUILD SUCCESS 8a7a6103258715857310253ec2193bcc4d1d7082, kernel test robot
- [linusw-pinctrl:for-next] BUILD SUCCESS 85fb4a0fad953343291bb61e85a27464aa235e6c, kernel test robot
- [PATCH v2 0/2] pinctrl: scmi: support i.MX95 OEM extensions,
Peng Fan (OSS)
- [PATCH v11 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support,
Peng Fan (OSS)
- [linusw-pinctrl:devel] BUILD SUCCESS 782b72a222a5f444f78606697e8f88893b9d0531, kernel test robot
- [linusw-pinctrl:fixes] BUILD SUCCESS 398c9955bdead2cf027cc263c13e7bd75e9d9116, kernel test robot
- [PATCH v1 1/1] gpiolib: swnode: Remove wrong header inclusion,
Andy Shevchenko
- [brgl:gpio/for-next] BUILD SUCCESS 9aeb26e3beaa02288710ca5e14dbcf56a70992d8, kernel test robot
- [linusw-pinctrl:for-next] BUILD SUCCESS cdbd87951e21eb869acd7bb5bdd78877ff5347fb, kernel test robot
- [brgl:at24/for-current] BUILD SUCCESS b3de7b433a323bb80303d77e69f1281bfab0a70b, kernel test robot
- [PATCH v7 10/10] arch: arm64: dts: ti: k3-am62p5-sk: Add TPS65224 PMIC support in AM62P dts, Bhargav Raviprakash
- [PATCH v7 09/10] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO, Bhargav Raviprakash
- [PATCH v7 08/10] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators,
Bhargav Raviprakash
- [PATCH v7 07/10] misc: tps6594-pfsm: Add TI TPS65224 PMIC PFSM, Bhargav Raviprakash
- [PATCH v7 06/10] mfd: tps6594-core: Add TI TPS65224 PMIC core, Bhargav Raviprakash
- [PATCH v7 05/10] mfd: tps6594-spi: Add TI TPS65224 PMIC SPI, Bhargav Raviprakash
- [PATCH v7 04/10] mfd: tps6594-i2c: Add TI TPS65224 PMIC I2C, Bhargav Raviprakash
- [PATCH v7 03/10] dt-bindings: mfd: ti,tps6594: Add TI TPS65224 PMIC, Bhargav Raviprakash
- [PATCH v7 02/10] mfd: tps6594: use volatile_table instead of volatile_reg, Bhargav Raviprakash
- [PATCH v7 01/10] mfd: tps6594: Add register definitions for TI TPS65224 PMIC, Bhargav Raviprakash
- [PATCH v7 00/10] Add support for TI TPS65224 PMIC, Bhargav Raviprakash
- [PATCH] pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces,
Paul Barker
- [PATCH v1 0/2] gpiolib: acpi: Improve IRQ labeling,
Andy Shevchenko
- [linusw-pinctrl:fixes] BUILD SUCCESS a0cedbcc8852d6c77b00634b81e41f17f29d9404, kernel test robot
- [linusw-pinctrl:devel] BUILD SUCCESS 50dca75e7d34f7ba2c5a57eb767a33f14c42000d, kernel test robot
- [libgpiod][PATCH v2 0/4] tools: timeout handling improvements,
Bartosz Golaszewski
- [libgpiod][PATCH 0/2] licensing: relicense C++ bindings and add a document on contributing,
Bartosz Golaszewski
- [PATCH v4 0/5] Add RK816 PMIC support,
Alex Bee
- [PATCH 0/2] pinctrl: renesas: r8a779h0: Add INTC-EX support,
Geert Uytterhoeven
- [PATCH v5 00/11] Add suspend to ram support for PCIe on J7200,
Thomas Richard
- [PATCH v5 04/11] mux: mmio: add resume support, Thomas Richard
- [PATCH v5 01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
- [PATCH v5 02/11] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
- [PATCH v5 05/11] PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup(), Thomas Richard
- [PATCH v5 03/11] mux: add mux_chip_resume() function, Thomas Richard
- [PATCH v5 06/11] PCI: cadence: Set cdns_pcie_host_init() global, Thomas Richard
- [PATCH v5 07/11] PCI: j721e: Use dev_err_probe() in the probe() function, Thomas Richard
- [PATCH v5 08/11] PCI: j721e: Add reset GPIO to struct j721e_pcie, Thomas Richard
- [PATCH v5 09/11] PCI: Add T_PERST_CLK_US macro, Thomas Richard
- [PATCH v5 10/11] PCI: j721e: Use T_PERST_CLK_US macro, Thomas Richard
- [PATCH v5 11/11] PCI: j721e: Add suspend and resume support, Thomas Richard
- [PATCH] gpio: tegra186: Fix tegra186_gpio_is_accessible() check,
Prathamesh Shete
- [PATCH v7 0/4] Add bridged amplifiers to cs42l43,
Charles Keepax
- [PATCH 1/2] pinctrl: qcom-ssbi: add support for PM8901,
Herman van Hazendonk
- [PATCH 2/2] pinctrl: qcom-ssbi: add support for PM8901,
Herman van Hazendonk
- [PATCH v6 0/4] Add bridged amplifiers to cs42l43,
Charles Keepax
- [PATCH] pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map(),
Zeng Heng
- [PATCH v10 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support,
Peng Fan (OSS)
- [bug report] pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map, Dan Carpenter
- [PATCH] Documentation: Add additional missing arg to dev_gpiod_get examples, Marco Sirabella
- [PATCH] Documentation: spi: Update gpio+bitbang instruction,
Marco Sirabella
- [PATCH 0/6] Add support for BCM2712 SD card controller,
Andrea della Porta
- [brgl:gpio/for-next] BUILD SUCCESS 8d1e84ab0176c2d2b49fd741d6609a021ecc1d01, kernel test robot
- [brgl:gpio/for-current] BUILD SUCCESS 11baa36d317321f5d54059f07d243c5a1dbbfbb2, kernel test robot
- [PATCH] Avoid error message on rk3328 use,
Etienne Buira
- [libgpiod][RFC/RFT 00/18] dbus: add GLib-based DBus daemon and command-line client,
Bartosz Golaszewski
- [libgpiod][RFC/RFT 03/18] bindings: glib: add build files, Bartosz Golaszewski
- [libgpiod][RFC/RFT 01/18] tests: split out reusable test code into a local static library, Bartosz Golaszewski
- [libgpiod][RFC/RFT 06/18] bindings: glib: add examples, Bartosz Golaszewski
- [libgpiod][RFC/RFT 04/18] bindings: glib: add public headers, Bartosz Golaszewski
- [libgpiod][RFC/RFT 02/18] tests: split out the common test code for bash scripts, Bartosz Golaszewski
- [libgpiod][RFC/RFT 08/18] README: document GLib bindings, Bartosz Golaszewski
- [libgpiod][RFC/RFT 05/18] bindings: glib: add core code, Bartosz Golaszewski
- [libgpiod][RFC/RFT 09/18] dbus: add build files, Bartosz Golaszewski
- [libgpiod][RFC/RFT 07/18] bindings: glib: add tests, Bartosz Golaszewski
- [libgpiod][RFC/RFT 10/18] dbus: add the API definitions, Bartosz Golaszewski
- [libgpiod][RFC/RFT 11/18] dbus: add a wrapper around the gdbus-codegen generated header, Bartosz Golaszewski
- [libgpiod][RFC/RFT 12/18] dbus: add data files, Bartosz Golaszewski
- [libgpiod][RFC/RFT 14/18] dbus: add tests, Bartosz Golaszewski
- [libgpiod][RFC/RFT 17/18] README: document the DBus API, Bartosz Golaszewski
- [libgpiod][RFC/RFT 18/18] TODO: drop the DBus daemon from the list, Bartosz Golaszewski
- [libgpiod][RFC/RFT 13/18] dbus: add gpio-manager code, Bartosz Golaszewski
- [libgpiod][RFC/RFT 16/18] dbus: client: add tests, Bartosz Golaszewski
- [libgpiod][RFC/RFT 15/18] dbus: add a command-line client, Bartosz Golaszewski
- Re: [libgpiod][RFC/RFT 00/18] dbus: add GLib-based DBus daemon and command-line client, Andy Shevchenko
- Re: [libgpiod][RFC/RFT 00/18] dbus: add GLib-based DBus daemon and command-line client, Sverdlin, Alexander
- [GIT PULL] pinctrl: renesas: Fixes for v6.9,
Geert Uytterhoeven
- [PATCH] pinctrl: pinconf-generic: print hex value,
Peng Fan (OSS)
- [PATCH 0/3] pinctrl: scmi: support i.MX95 OEM extensions,
Peng Fan (OSS)
- [PATCH v9 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support,
Peng Fan (OSS)
- [PATCH v1 0/4] gpiolib: acpi: Use con_id in acpi_dev_gpio_irq_get_by(),
Andy Shevchenko
- [PATCH][RFC][resend after bogus] gpio-syscon: do not report bogus error,
Etienne Buira
- [PATCH 0/4] Add bridged amplifiers to cs42l43,
Charles Keepax
- [PATCH v2 1/5] pinctrl: freescale: imx8ulp: fix module autoloading,
Krzysztof Kozlowski
- [PATCH v1 0/2] gpiolib: acpi: A couple of error checks amendmends,
Andy Shevchenko
- [PATCH v3 0/6] mmc: sdhci-acpi: Add some DMI quirks to fix various issues on Bay Trail devices,
Hans de Goede
- [PATCH 00/11] Add Mobileye EyeQ system controller support (clk, reset, pinctrl),
Théo Lebrun
- [PATCH 01/11] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller, Théo Lebrun
- [PATCH 03/11] dt-bindings: reset: mobileye,eyeq5-reset: add EyeQ6L and EyeQ6H, Théo Lebrun
- [PATCH 04/11] clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag, Théo Lebrun
- [PATCH 05/11] clk: eyeq: add driver, Théo Lebrun
- [PATCH 06/11] reset: eyeq: add platform driver, Théo Lebrun
- [PATCH 08/11] MIPS: mobileye: eyeq5: add OLB syscon node, Théo Lebrun
- [PATCH 09/11] MIPS: mobileye: eyeq5: use OLB clocks controller node, Théo Lebrun
- [PATCH 07/11] pinctrl: eyeq5: add platform driver, Théo Lebrun
- [PATCH 11/11] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes, Théo Lebrun
- [PATCH 02/11] dt-bindings: clock: mobileye,eyeq5-clk: add EyeQ6L and EyeQ6H, Théo Lebrun
- [PATCH 10/11] MIPS: mobileye: eyeq5: add OLB reset controller node, Théo Lebrun
- [PATCH] gpio: lpc32xx: fix module autoloading,
Krzysztof Kozlowski
- [PATCH 1/5] pinctrl: freescale: imx8ulp: fix module autoloading,
Krzysztof Kozlowski
- [linusw-gpio:b4/descriptors-wireless] BUILD REGRESSION 3ca0eec7ecfa5c404f41e9b1e7690ec64de77b53, kernel test robot
- [PATCH v1 1/1] gpio: sch: Switch to memory mapped IO accessors,
Andy Shevchenko
- [PATCH v1 1/1] gpio: pcie-idio-24: Use -ENOTSUPP consistently,
Andy Shevchenko
- [PATCH v1 1/1] gpio: regmap: Use -ENOTSUPP consistently,
Andy Shevchenko
- [linusw-gpio:b4/descriptors-wireless 2/2] drivers/gpio/gpio-ath79.c:240:32: error: use of undeclared identifier 'pdev'; did you mean 'dev'?, kernel test robot
- [linusw-gpio:b4/descriptors-wireless 2/2] drivers/gpio/gpio-ath79.c:263:1: warning: non-void function does not return a value, kernel test robot
- [linusw-gpio:b4/descriptors-wireless 2/2] drivers/gpio/gpio-ath79.c:240:32: error: 'pdev' undeclared; did you mean 'dev'?, kernel test robot
- [linusw-gpio:b4/descriptors-wireless 2/2] drivers/gpio/gpio-ath79.c:263:1: warning: no return statement in function returning non-void, kernel test robot
- [PATCH v2 0/2] Allow gpio-hog nodes in qcom,pmic-gpio bindings (& dt fixup),
Luca Weiss
- [PATCH] pinctrl: apple-gpio: Fix null pointer dereference in apple_gpio_pinctrl_probe(),
Ma Ke
- [PATCH v7 0/3] Add support for nuvoton ma35d1 pin control,
Jacky Huang
- [libgpiod][PATCH 0/2] gpio-tools: allow specifying longer time periods,
Bartosz Golaszewski
[PATCH v1] gpio: nuvoton: Fix sgpio irq handle error,
Jim Liu
[PATCH v1 1/1] Documentation: gpio: Replace leading TABs by spaces in the code blocks,
Andy Shevchenko
[PATCH v2 0/2] gpiolib: Fix gpio_lookup_flags mess and add Return sections,
Andy Shevchenko
[brgl:gpio/for-current] BUILD SUCCESS e43c2feb8f323b91c85ddbf23769c3586cd91010, kernel test robot
[PATCH 0/2] Allow gpio-hog nodes in qcom,pmic-gpio bindings (& dt fixup),
Luca Weiss
libgpiod 2.1.1: Installation under ubuntu 22.04.4,
Oliver Schütt
[PATCH v6 00/11] Add support for TI TPS65224 PMIC,
Bhargav Raviprakash
- [PATCH v6 04/11] dt-bindings: mfd: ti,tps6594: Add TI TPS65224 PMIC, Bhargav Raviprakash
- [PATCH v6 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO, Bhargav Raviprakash
- [PATCH v6 11/11] arch: arm64: dts: ti: k3-am62p5-sk: Add TPS65224 PMIC support in AM62P dts, Bhargav Raviprakash
- [PATCH v6 01/11] mfd: tps6594: Add register definitions for TI TPS65224 PMIC, Bhargav Raviprakash
- [PATCH v6 02/11] mfd: tps6594: use volatile_table instead of volatile_reg, Bhargav Raviprakash
- [PATCH v6 03/11] mfd: tps6594: add regmap config in match data, Bhargav Raviprakash
- [PATCH v6 05/11] mfd: tps6594-i2c: Add TI TPS65224 PMIC I2C, Bhargav Raviprakash
- [PATCH v6 06/11] mfd: tps6594-spi: Add TI TPS65224 PMIC SPI, Bhargav Raviprakash
- [PATCH v6 07/11] mfd: tps6594-core: Add TI TPS65224 PMIC core, Bhargav Raviprakash
- [PATCH v6 08/11] misc: tps6594-pfsm: Add TI TPS65224 PMIC PFSM, Bhargav Raviprakash
- [PATCH v6 09/11] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators, Bhargav Raviprakash
[PATCH] dt-bindings: pinctrl: mediatek: mt7622: add "gpio-ranges" property,
Rafał Miłecki
[PATCH 1/3] dt-bindings: pinctrl: mediatek: mt7622: fix array properties,
Rafał Miłecki
[PATCH 1/6] mmc: core: Add mmc_gpiod_set_cd_config() function,
Hans de Goede
[PATCH v2 1/2] pinctrl: baytrail: Fix selecting gpio pinctrl state,
Hans de Goede
[PATCH 1/2] pinctrl: baytrail: Fix selecting gpio pinctrl state,
Hans de Goede
[GIT PULL] intel-gpio for 6.9-1,
Andy Shevchenko
[GIT PULL] gpio: fixes for v6.9-rc3,
Bartosz Golaszewski
[PATCH v1 1/1] gpio: crystalcove: Use -ENOTSUPP consistently, Andy Shevchenko
[PATCH v1 1/1] gpio: wcove: Use -ENOTSUPP consistently,
Andy Shevchenko
[brgl:gpio/for-current] BUILD SUCCESS 83092341e15d0dfee1caa8dc502f66c815ccd78a, kernel test robot
[linux-next:master] BUILD REGRESSION 8568bb2ccc278f344e6ac44af6ed010a90aa88dc,
kernel test robot
[linusw-pinctrl:fixes] BUILD SUCCESS c5d3b64c568a344e998830e0e94a7c04e372f89b, kernel test robot
[linusw-pinctrl:for-next] BUILD SUCCESS 07bd48cca03b012d3d788a02b4b29813a93c75b4, kernel test robot
[linusw-pinctrl:devel] BUILD SUCCESS 70e1352101ec07c013e3e48961999fdd588df0e0, kernel test robot
[PATCH v8 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support,
Peng Fan (OSS)
[PATCH v1 1/1] gpiolib: Update the kernel documentation - add Return sections,
Andy Shevchenko
[PATCH v1 1/1] pinctrl: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs,
Andy Shevchenko
[PATCH v2 0/2] gpio: cdev: label sanitization fixes,
Bartosz Golaszewski
[brgl:gpio/for-current] BUILD SUCCESS e8acd2d209a387f2358c2c83fe894b444db9ea46, kernel test robot
[brgl:gpio/for-next] BUILD SUCCESS 1685f72a6dcc55b6a5e50c127b9a0165e8c682a3, kernel test robot
[linux-next:master] BUILD REGRESSION 727900b675b749c40ba1f6669c7ae5eb7eb8e837, kernel test robot
[PATCH 0/2] gpio: cdev: label sanitization fixes,
Kent Gibson
[brgl:gpio/for-next] BUILD SUCCESS 782f4e47ffc19622bf80b3c0cf9cadd2b0b9a644, kernel test robot
[PATCH v9 0/9] Initial Marvell PXA1908 support,
Duje Mihanović
- [PATCH v9 6/9] dt-bindings: marvell: Document PXA1908 SoC, Duje Mihanović
- [PATCH v9 4/9] dt-bindings: clock: Add Marvell PXA1908 clock bindings, Duje Mihanović
- [PATCH v9 2/9] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible, Duje Mihanović
- [PATCH v9 7/9] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform, Duje Mihanović
- [PATCH v9 3/9] pinctrl: single: add marvell,pxa1908-padconf compatible, Duje Mihanović
- [PATCH v9 1/9] clk: mmp: Switch to use struct u32_fract instead of custom one, Duje Mihanović
- [PATCH v9 5/9] clk: mmp: Add Marvell PXA1908 clock driver, Duje Mihanović
- [PATCH v9 8/9] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte, Duje Mihanović
- [PATCH v9 9/9] MAINTAINERS: add myself as Marvell PXA1908 maintainer, Duje Mihanović
- Re: [PATCH v9 0/9] Initial Marvell PXA1908 support, Rob Herring
[PATCH v2] gpiolib: Fix triggering "kobject: 'gpiochipX' is not initialized, yet" kobject_get() errors,
Hans de Goede
[Index of Archives]
[Linux SPI]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]