Re: [PATCH 2/7] pinctrl: bcm: Add STB family pin controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ivan,

Am 31.07.24 um 08:28 schrieb Ivan T. Ivanov:
This driver provide pin muxing and configuration functionality
for BCM2712 SoC used by RPi5. According to [1] this chips is
incarnation of chip used in Broadcom STB  product line.

[1] https://lore.kernel.org/lkml/f6601f73-cb22-4ba3-88c5-241be8421fc3@xxxxxxxxxxxx/

Cc: Jonathan Bell <jonathan@xxxxxxxxxxxxxxx>
Cc: Phil Elwell <phil@xxxxxxxxxxxxxxx>
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxx>
---
  drivers/pinctrl/bcm/Kconfig           |   13 +
  drivers/pinctrl/bcm/Makefile          |    1 +
  drivers/pinctrl/bcm/pinctrl-brcmstb.c | 1217 +++++++++++++++++++++++++
  3 files changed, 1231 insertions(+)
  create mode 100644 drivers/pinctrl/bcm/pinctrl-brcmstb.c

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 35b51ce4298e..2e1b8d444f58 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -3,6 +3,19 @@
  # Broadcom pinctrl drivers
  #

+config PINCTRL_BRCMSTB
+	tristate "Broadcom STB product line pin controller driver"
+	depends on OF && (ARCH_BRCMSTB || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	help
+	  This driver provide pin muxing and configuration functionality
+	  for Broadcom STB product line chipsets. BCM2712 SoC is one of these
+	  chipsets.
+
+	  If M is selected the module will be called pinctrl-brcmstb.
+

this driver should be enabled in arm64/defconfig at the end of the patch
series.

Thanks





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux