Linux Intel Graphics

• Thread Index

• ✓ Fi.CI.BAT: success for drm/i915/psr: Implement WA to help reach PC10 (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/gt: Retry RING_HEAD reset until it get sticks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• [PATCH 10/10] drm/i915/dp: Add support for 3 vdsc engines and 12 slices.
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 09/10] drm/i915/dsc: Account for Odd pixel removal
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 07/10] drm/i915/dp: Compute pixel replication count for DSC 12 slices case
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 08/10] drm/i915/display: Account for pixel replication in pipe_src
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 05/10] drm/i915/dp: Add check for hdisplay divisible by slice count
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 06/10] drm/i915/display: Add DSC pixel replication
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 04/10] drm/i915/vdsc: Add support for read/write PPS for DSC3
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 03/10] drm/i915/vdsc: Add register bits for VDSC2 engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 02/10] drm/i915/vdsc: Use VDSC0/VDSC1 for LEFT/RIGHT VDSC engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 01/10] drm/i915/display: Prepare for dsc 3 stream splitter
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 00/10] Add support for 3 VDSC engines 12 slices
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v7 1/5] drm: Introduce device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH] drm/i915/psr: Implement WA to help reach PC10
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• Re: [PATCH] i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• RE: [PATCH v3 5/7] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v3 3/7] drm/i915/xe3lpd: Include hblank restriction for xe3lpd
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: plane property for async supported modifiers
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH v7 1/5] drm: Introduce device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH] i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: Sean Christopherson <seanjc@xxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd() (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/pfit: Panel fitter stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Miscelaneous fixes for display tracepoints (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Write source OUI for non-eDP sinks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd() (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/pfit: Panel fitter stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/pfit: Panel fitter stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/pfit: Panel fitter stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: "Taylor, Clinton A" <clinton.a.taylor@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Miscelaneous fixes for display tracepoints (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Miscelaneous fixes for display tracepoints (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: warning for Miscelaneous fixes for display tracepoints (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Write source OUI for non-eDP sinks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Write source OUI for non-eDP sinks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PATCH v2] drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: Shuicheng Lin <shuicheng.lin@xxxxxxxxx>
• Re: [PATCH v3 3/7] drm/i915/xe3lpd: Include hblank restriction for xe3lpd
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v3 2/7] drm/i915/xe3lpd: Add cdclk changes
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v3 2/7] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• RE: ✗ Fi.CI.BAT: failure for series starting with [v5,1/1] drm/i915/pxp: Add missing tag for Wa_14019159160
  • From: "Teres Alexis, Alan Previn" <alan.previn.teres.alexis@xxxxxxxxx>
• Re: [PATCH v14 0/3] Vrr refactoring and panel replay workaround
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 9/9] drm/i915: Remove ckey/format checks from skl_update_scaler_plane()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 8/9] drm/i915/pfit: Extract intel_pfit.c
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 7/9] drm/i915/panel: Convert panel code to intel_display
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 6/9] drm/i915/pfit: Check pfit destination window on ILK-BDW
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 5/9] drm/i915/pfit: Reject cloning when using pfit on ILK-BDW
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 4/9] drm/i915/pfit: Check pfit minimum timings in pre-SKL
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/9] drm/i915/pfit: Reject pfit downscaling for GMCH platforms
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/9] drm/i915/pfit: Check pfit scaling factors on ILK-BDW
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/9] drm/i915/pfit: Check pipe source size against pfit limits on ILK-BDW
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/9] drm/i915/pfit: Panel fitter stuff
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: plane property for async supported modifiers
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: plane property for async supported modifiers
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH v3 5/5] drm/i915/display: Cover all possible pipes in TP_printk()
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3 4/5] drm/i915/display: Do not use ids from enum pipe in TP_printk()
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3 2/5] drm/i915/display: Zero-initialize frame/scanline counts in tracepoints
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3 3/5] drm/i915/display: Store pipe name in trace events
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3 1/5] drm/i915/display: Fix out-of-bounds access in pipe-related tracepoints
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3 0/5] Miscelaneous fixes for display tracepoints
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: plane property for async supported modifiers
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH v3 0/8] drm/i915: Write source OUI for non-eDP sinks
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 8/8] drm/i915/dp: Write the source OUI for non-eDP sinks as well
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 3/8] drm/i915/dp: Initialize the source OUI write timestamp always
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 5/8] drm/i915/dp: Reuse intel_dp_detect_dsc_caps() for eDP
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 4/8] drm/i915/dp: Track source OUI validity explicitly
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 6/8] drm/i915/dp: Write the source OUI for eDP before detecting sink capabilities
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 7/8] drm/i915/dp: Write the source OUI during connector detection
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 2/8] drm/i915/dp: Ensure panel power remains enabled during connector detection
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 1/8] drm/i915/dp: Flush modeset commits during connector detection
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 1/7] drm/i915/xe3lpd: Update pmdemand programming
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 6/9] drm/i915/display: Add DSC pixel replication
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Workaround for odd panning for planar yuv (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: plane property for async supported modifiers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/i915/wa: Introduce intel_wa_cpu.c for CPU specific workarounds
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Workaround for odd panning for planar yuv (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: plane property for async supported modifiers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: plane property for async supported modifiers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• Re: [linux-next:master] [fs] d91ea8195e: stress-ng.ring-pipe.ops_per_sec -5.1% regression (stress-ng.ring-pipe.pipe_read+write_calls_per_sec 7.3% improvement)
  • From: Oliver Sang <oliver.sang@xxxxxxxxx>
• [PATCH] drm/i915/display: plane property for async supported modifiers
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH] drm/i915/lspcon: do not hardcode settle timeout
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v4] drm/i915/gt: Retry RING_HEAD reset until it get sticks
  • From: "Gote, Nitin R" <nitin.r.gote@xxxxxxxxx>
• Re: [linux-next:master] [fs] d91ea8195e: stress-ng.ring-pipe.ops_per_sec -5.1% regression (stress-ng.ring-pipe.pipe_read+write_calls_per_sec 7.3% improvement)
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [linux-next:master] [fs] d91ea8195e: stress-ng.ring-pipe.ops_per_sec -5.1% regression (stress-ng.ring-pipe.pipe_read+write_calls_per_sec 7.3% improvement)
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Add xe3lpd edp enabling (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for series starting with [v5,1/1] drm/i915/pxp: Add missing tag for Wa_14019159160
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/1] drm/i915/pxp: Add missing tag for Wa_14019159160
  • From: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/gt: Retry RING_HEAD reset until it get sticks
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add xe3lpd edp enabling (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add xe3lpd edp enabling (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Add xe3lpd edp enabling (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 7/7] drm/i915/xe3lpd: Add condition for EDP to powerdown P2.PG
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 6/7] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 5/7] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 3/7] drm/i915/xe3lpd: Include hblank restriction for xe3lpd
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 4/7] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 1/7] drm/i915/xe3lpd: Update pmdemand programming
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 2/7] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v3 0/7] Add xe3lpd edp enabling
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] drm/i915/display: Add DSC pixel replication
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/doc: Document that userspace should utilize CRTCs bottom up
  • From: Simon Ser <contact@xxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/gt: Retry RING_HEAD reset until it get sticks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: "Lin, Shuicheng" <shuicheng.lin@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• [PATCH] i915: fix DRM_I915_GVT_KVMGT dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH v4] drm/i915/gt: Retry RING_HEAD reset until it get sticks
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Remove unused underrun irq/reporting bits (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/i915/wa: Introduce intel_wa_cpu.c for CPU specific workarounds
  • From: Riana Tauro <riana.tauro@xxxxxxxxx>
• Re: [PATCH] drm/i915/lspcon: do not hardcode settle timeout
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/4] drm/i915/dg2: Implement Wa_14022698537
  • From: Riana Tauro <riana.tauro@xxxxxxxxx>
• Re: [PATCH v2 2/4] drm/i915/dg2: Introduce DG2_WA subplatform
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Remove unused underrun irq/reporting bits (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/display: Workaround for odd panning for planar yuv
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Remove unused underrun irq/reporting bits (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Add 6k resolution support for a single CRTC
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] drm/i915: Remove unused underrun irq/reporting bits
  • From: Sai Teja Pottumuttu <sai.teja.pottumuttu@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Remove unused underrun irq/reporting bits (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Remove unused underrun irq/reporting bits (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add 6k resolution support for a single CRTC
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915: Remove unused underrun irq/reporting bits
  • From: Sai Teja Pottumuttu <sai.teja.pottumuttu@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add 6k resolution support for a single CRTC
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 7/7] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH 3/4] drm/i914/xe3lpd: Increase bigjoiner limitations
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 4/4] drm/i915/xe3lpd: Prune modes for YUV420
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 1/4] drm/i915/xe3lpd: Increase resolution for plane to support 6k
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 2/4] drm/i915/xe3lpd: Increase max_h max_v for PSR
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 0/4] Add 6k resolution support for a single CRTC
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH] drm/i915: Remove unused underrun irq/reporting bits
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/guc: Enable PXP GuC autoteardown flow (rev4)
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/guc: Enable PXP GuC autoteardown flow (rev3)
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for drm/i915/guc: Enable PXP GuC autoteardown flow (rev2)
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] drm/i915: Implement Dbuf overlap detection feature starting from LNL
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for series starting with [v2,1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm: Introduce DRM client library (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Remove unused underrun irq/reporting bits
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [v2] drm/i915/dp: Add FEC Enable Retry mechanism
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• [PATCH] drm/i915: Remove unused underrun irq/reporting bits
  • From: Sai Teja Pottumuttu <sai.teja.pottumuttu@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for Introduce drm sharpness property (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] drm/i915/display: Load the lut values and enable sharpness
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH v3 4/5] drm/i915/display: Add registers and compute the strength
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH v4 3/5] drm/i915/display: Enable the second scaler for sharpness
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH v4 2/5] drm/i915/display: Compute the scaler filter coefficients
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH v2 1/5] drm: Introduce sharpness strength property
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• [PATCH 0/5] Introduce drm sharpness property
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm: Introduce DRM client library (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] drm/i915/gt: Retry RING_HEAD reset until it sticks
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Add support for 3 VDSC engines 12 slices (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add support for 3 VDSC engines 12 slices (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: "Upadhyay, Tejas" <tejas.upadhyay@xxxxxxxxx>
• [PATCH v2] drm/i915/gt: Retry RING_HEAD reset until it sticks
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• RE: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: "Upadhyay, Tejas" <tejas.upadhyay@xxxxxxxxx>
• [PATCH v4 09/12] drm/nouveau: Suspend and resume clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 10/12] drm/radeon: Suspend and resume clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 08/12] drm/amdgpu: Suspend and resume internal clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 11/12] drm/client: Make client support optional
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 12/12] drm/client: Add client-lib module
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 03/12] drm/fbdev-dma: Select FB_DEFERRED_IO
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 07/12] drm/client: Move suspend/resume into DRM client callbacks
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 05/12] drm/fbdev: Store fbdev module parameters in separate file
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 06/12] drm/client: Move client event handlers to drm_client_event.c
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 04/12] drm/fbdev: Select fbdev I/O helpers from modules that require them
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 00/12] drm: Introduce DRM client library
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 02/12] drm/xe: Select DRM_CLIENT_SELECTION
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 01/12] drm/i915: Select DRM_CLIENT_SELECTION
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 8/9] drm/i915/dsc: Account for Odd pixel removal
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 9/9] drm/i915/dp: Add support for 3 vdsc engines and 12 slices.
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 7/9] drm/i915/dp: Compute pixel replication count for DSC 12 slices case
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 6/9] drm/i915/display: Add DSC pixel replication
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 5/9] drm/i915/dp: Add check for hdisplay divisible by slice count
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 4/9] drm/i915/vdsc: Add support for read/write PPS for DSC3
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 3/9] drm/i915/vdsc: Add register bits for VDSC2 engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 2/9] drm/i915/vdsc: Use VDSC0/VDSC1 for LEFT/RIGHT VDSC engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 1/9] drm/i915/display: Prepare for dsc 3 stream splitter
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 0/9] Add support for 3 VDSC engines 12 slices
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• ✓ Fi.CI.IGT: success for Vrr refactoring and panel replay workaround (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for Add support for 3 VDSC engines 12 slices
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/12] drm/client: Move suspend/resume into DRM client callbacks
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 7/9] drm/i915/dp: Compute pixel replication count for DSC 12 slices case
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 9/9] drm/i915/dp: Add support for 3 vdsc engines and 12 slices.
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 8/9] drm/i915/dsc: Account for Odd pixel removal
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 6/9] drm/i915/display: Add DSC pixel replication
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 4/9] drm/i915/vdsc: Add support for read/write PPS for DSC3
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 5/9] drm/i915/dp: Add check for hdisplay divisible by slice count
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 2/9] drm/i915/vdsc: Use VDSC0/VDSC1 for LEFT/RIGHT VDSC engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 3/9] drm/i915/vdsc: Add register bits for VDSC2 engine
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 1/9] drm/i915/display: Prepare for dsc 3 stream splitter
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 0/9] Add support for 3 VDSC engines 12 slices
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• RE: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: "Gupta, Anshuman" <anshuman.gupta@xxxxxxxxx>
• linux-next: manual merge of the drm-xe tree with the drm-intel tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: [PATCH 7/7] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 6/7] drm/i915/dp: Use clamp for pipe_bpp limits with DSC
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 5/7] drm/i915/dp: Refactor pipe_bpp limits with dsc
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 4/7] drm/i915/dp: Drop max_requested_bpc for dsc pipe_min/max bpp
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v2 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Fix i915 pmu on bind/unbind (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Fix irq related documentation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/guc: Enable PXP GuC autoteardown flow (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Async flip + compression, and some plane cleanups (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Revert "perf/core: Only copy-to-user after completely unlocking all locks, v3."
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Revert "ICL HACK: usb/icl: Work around ACPI boottime crash"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Some correction in the DP Link Training sequence (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Fix i915 pmu on bind/unbind (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Add xe3lpd edp enabling (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Fix i915 pmu on bind/unbind (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Fix i915 pmu on bind/unbind (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix irq related documentation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/selftests: Implement frequency logging for energy reading validation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] drm/i915/pmu: Release open events when unregistering
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 5/8] drm/i915/pmu: Stop setting event_init to NULL
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 7/8] drm/i915/pmu: Remove pointless synchronize_rcu() call
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 1/8] squashed series - 20241008183501.1354695-1-lucas.demarchi@xxxxxxxxx
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 6/8] drm/i915/pmu: Replace closed with registered
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 2/8] drm/i915/pmu: Let resource survive unbind
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 4/8] drm/i915/pmu: Rename cpuhp_slot to cpuhp_state
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 3/8] drm/i915/pmu: Fix crash due to use-after-free
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 0/8] Fix i915 pmu on bind/unbind
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: move segment iterator to match current offset (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/guc: Enable PXP GuC autoteardown flow (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] drm/i915/xe3lpd: Add new display power wells
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v2 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PATCH] drm/i915: Fix irq related documentation
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/guc: Enable PXP GuC autoteardown flow (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: "Lin, Shuicheng" <shuicheng.lin@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dp: use string choice helpers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/10] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Align framebuffers according to what display minimum alignment states (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Async flip + compression, and some plane cleanups (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Revert "perf/core: Only copy-to-user after completely unlocking all locks, v3."
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH topic/core-for-CI] Revert "perf/core: Only copy-to-user after completely unlocking all locks, v3."
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH v2 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [core-for-CI] Revert "ICL HACK: usb/icl: Work around ACPI boottime crash"
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: ✗ CI.FULL: failure for drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Revert "ICL HACK: usb/icl: Work around ACPI boottime crash"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Use trans push mechanism to generate frame change event
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v5] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: "Anirban, Sk" <sk.anirban@xxxxxxxxx>
• [core-for-CI] Revert "ICL HACK: usb/icl: Work around ACPI boottime crash"
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Implement Wa_14022698537
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Implement Wa_14022698537
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Implement Wa_14022698537
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-intel-next
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Implement Wa_14021768792 to bypass m_n ratio limit (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Implement Wa_14022698537
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/i915/wa: Introduce intel_wa_cpu.c for CPU specific workarounds
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/i915/dg2: Introduce DG2_WA subplatform
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/i915/pciids: Refactor DG2 PCI IDs into workaround ranges
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for series starting with [v1,1/2] drm/dp: fix warning for target_rr_divide missing comment
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] drm/i915/dg2: Implement Wa_14022698537
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 3/4] drm/i915/wa: Introduce intel_wa_cpu.c for CPU specific workarounds
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 2/4] drm/i915/dg2: Introduce DG2_WA subplatform
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 1/4] drm/i915/pciids: Refactor DG2 PCI IDs into workaround ranges
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 0/4] Implement Wa_14022698537
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Some correction in the DP Link Training sequence (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Some correction in the DP Link Training sequence (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Vrr refactoring and panel replay workaround (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] drm/i915/vrr: Do not overwrite TRANS_PUSH PSR Frame Change Enable
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add xe3lpd edp enabling (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add xe3lpd edp enabling (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Add xe3lpd edp enabling (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/12] drm/xe: Remove double pageflip
  • From: "Govindapillai, Vinod" <vinod.govindapillai@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/selftests: Implement frequency logging for energy reading validation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/selftests: Implement frequency logging for energy reading validation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: ✗ Fi.CI.IGT: failure for drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: "Saarinen, Jani" <jani.saarinen@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Async flip + compression, and some plane cleanups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/5] drm: Introduce device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v1 1/2] drm/dp: fix warning for target_rr_divide missing comment
  • From: Sunil Khatri <sunil.khatri@xxxxxxx>
• [PATCH v1 2/2] drm: fix doc warning for height and width of plane
  • From: Sunil Khatri <sunil.khatri@xxxxxxx>
• Re: [PATCH v2 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] lib/gem_mman: Stop lying about I915_MMAP_OFFSET_GTT support
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] drm/i915/xe3lpd: Include hblank restriction for xe3lpd
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: move segment iterator to match current offset (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/xe/display: Fix memory leak in parse_lfp_panel_dtd()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/ddi: use string choice helpers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/ddi: use string choice helpers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp: use string choice helpers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: use string choice helpers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: "Govindapillai, Vinod" <vinod.govindapillai@xxxxxxxxx>
• Re: linux-next: build warning after merge of the drm-intel tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCHv4] drm/i915/dp: read Aux RD interval just before setting the FFE preset
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-xe-fixes
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Remove kstrdup_const() and kfree_const() usage (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: remove all IS_<PLATFORM>_GT<N>() macros (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 08/10] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 06/10] drm/i915/xe3lpd: Include hblank restriction for xe3lpd
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 05/10] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 10/10] drm/i915/xe3lpd: Add condition for EDP to powerdown P2.PG
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 03/10] drm/i915/xe3lpd: Add new display power wells
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 02/10] drm/i915/xe3lpd: Adjust watermark calculations
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 01/10] drm/i915/xe3lpd: reuse xe2lpd definition
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH v2 00/10] Add xe3lpd edp enabling
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• Re: [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: "Taylor, Clinton A" <clinton.a.taylor@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [v2,1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] drm/client: Make copies of modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• [PATCH v5] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: Sk Anirban <sk.anirban@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Remove unused underrun interrupt bits
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Remove unused underrun interrupt bits
  • From: "Vivekanandan, Balasubramani" <balasubramani.vivekanandan@xxxxxxxxx>
• [PATCH v2 9/9] drm/i915: Carve up skl_get_plane_caps()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/dp: Fix memory leak in parse_lfp_panel_dtd()
  • From: Shuicheng Lin <shuicheng.lin@xxxxxxxxx>
• [PATCH i-g-t] lib/gem_mman: Stop lying about I915_MMAP_OFFSET_GTT support
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• [PATCH linux-next] drm/i915/ddi: use string choice helpers
  • From: R Sundar <prosunofficial@xxxxxxxxx>
• [PATCH linux-next] drm/i915/dp: use string choice helpers
  • From: R Sundar <prosunofficial@xxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/5] drm: Introduce device wedged event
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915/irq: s/gen3/gen2/
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] drm/i915/vrr: Do not overwrite TRANS_PUSH PSR Frame Change Enable
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915/irq: s/gen3/gen2/
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/cdclk: Check cdclk value before division
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Allow fastset for change in HDR infoframe (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Align framebuffers according to what display minimum alignment states (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Align framebuffers according to what display minimum alignment states (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/xe/display: Fix memory leak in parse_lfp_panel_dtd()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/xe/display: Fix memory leak in parse_lfp_panel_dtd()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PULL] drm-xe-next
  • From: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] drm/i915/psr: Add VRR send push interface for PSR usage
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] drm/i915/psr: Add VRR send push interface for PSR usage
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v2 1/4] drm/i915/dp: Assume panel power is off if runtime suspended''
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dmc: Add dmc null check
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: linux-next: build warnings after merge of the drm-misc tree
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• RE: [PATCH 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] drm/i915/psr: Add VRR send push interface for PSR usage
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/hdcp: Move dig_port assignment lower in the sequence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Use trans push mechanism to generate frame change event
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] drm/i915/display: iterare through channels if no feasible frequencies
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Use trans push mechanism to generate frame change event
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] drm/i915/display: Generate PSR frame change event on cursor update
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 6/7] drm/i915/psr: Add VRR send push interface for PSR usage
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 5/7] drm/i915/psr: Simplify frontbuffer invalidate/flush callbacks
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 4/7] drm/i915/psr: Rename psr_force_hw_tracking_exit as psr_force_exit
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 3/7] drm/i915/vrr: Use TRANS_PUSH mechanism for PSR frame change
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 2/7] drm/i915/vrr: Do not overwrite TRANS_PUSH PSR Frame Change Enable
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 1/7] drm/i915/psr: Add TRANS_PUSH register bit definition for PSR
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 0/7] Use trans push mechanism to generate frame change event
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Implement Wa_14021768792 to bypass m_n ratio limit (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Implement Wa_14021768792 to bypass m_n ratio limit (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• linux-next: build warnings after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• linux-next: build warnings after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Vrr refactoring and panel replay workaround (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• ✗ Fi.CI.SPARSE: warning for Vrr refactoring and panel replay workaround (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915/hdcp: Move dig_port assignment lower in the sequence
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH 4/4] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n ratio > 10
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 3/4] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 2/4] drm/i915/display: Limit m/n ratio to 10 for display > 12
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 1/4] Add bits for link_n_exended for DISPLAY >= 14
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 0/4] Implement Wa_14021768792 to bypass m_n ratio limit
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• RE: [PATCH] drm/i915/color: Use correct variable to load lut
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH v14 3/3] drm/i915/panelreplay: Panel replay workaround with VRR
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [PATCH v14 2/3] drm/i915/vrr: Split vrr-compute-config in two phases
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [PATCH v14 1/3] drm/i915/vrr: Add helper to check if vrr possible
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [PATCH v14 0/3] Vrr refactoring and panel replay workaround
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• RE: [PATCH 1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 10/10] drm/i915/xe3lpd: Add powerdown value of eDP over type c
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: gen2 stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/xe/display: Fix memory leak in parse_lfp_panel_dtd()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/xe/display: Fix memory leak in parse_lfp_panel_dtd()
  • From: Shuicheng Lin <shuicheng.lin@xxxxxxxxx>
• Re: [PATCH 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• Re: [PATCH 10/10] drm/i915/xe3lpd: Add powerdown value of eDP over type c
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/gt: Retry RING_HEAD reset until it sticks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/4] drm/i915/dp: Assume panel power is off if runtime suspended
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/i915/dp: Assume panel power is off if runtime suspended
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Async flip + compression, and some plane cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• RE: [PATCH v2 2/4] drm/i915/dp: Disable unnecessary HPD polling for eDP
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/4] drm/i915/dp: Assume panel power is off if runtime suspended
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: "Taylor, Clinton A" <clinton.a.taylor@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dp: Add FEC Enable Retry mechanism (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] drm/xe/display: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 3/4] drm/xe/display: Separate the d3cold and non-d3cold runtime PM handling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 2/4] drm/i915/dp: Disable unnecessary HPD polling for eDP
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 0/4] drm/xe: Fix HPD interrupt enabling during runtime resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 1/4] drm/i915/dp: Assume panel power is off if runtime suspended
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v1 3/3] drm/ci: add sm8350-hdk
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Remove kstrdup_const() and kfree_const() usage (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: remove all IS_<PLATFORM>_GT<N>() macros (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove all IS_<PLATFORM>_GT<N>() macros (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: remove all IS_<PLATFORM>_GT<N>() macros (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Align framebuffers according to what display minimum alignment states
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Align framebuffers according to what display minimum alignment states
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 9/9] drm/i915: Carve up skl_get_plane_caps()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 8/9] drm/i915: Relocate xe AUX hack
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 7/9] drm/i915: Nuke ADL pre-production Wa_22011186057
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 6/9] drm/i915: Disable scanout VT-d workaround for TGL+
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 5/9] drm/i915: Reuse vlv_primary_min_alignment() for sprites as well
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 4/9] drm/i915: Use plane->can_async_flip() for alignment exceptions
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/9] drm/i915: Introduce plane->can_async_flip()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/9] drm/i915: Allow async flips with compression on ICL
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/9] drm/i915: Allow async flips with render compression on TGL+
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/9] drm/i915: Async flip + compression, and some plane cleanups
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PULL] drm-misc-next
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm: Introduce DRM client library (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drm/xe/display: align framebuffers according to hw requirements
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] drm/xe: add interface to request physical alignment for buffer objects
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Update PLL c20 phy value for DP uhbr20 (rev2)
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: move segment iterator to match current offset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/xe/display: align framebuffers according to hw requirements
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for prunue audio frequencies based on bw limits for DP2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [v2,1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [v2] drm/i915/dp: Add FEC Enable Retry mechanism
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/xe/display: align framebuffers according to hw requirements
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 1/2] drm/xe: add interface to request physical alignment for buffer objects
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 0/2] Align framebuffers according to what display minimum alignment states
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] drm/i915/display: Fix Panel Replay vblank enable workaround
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 8/8] drm/client: s/unsigned int i/int i/
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] drm/client: Make copies of modes
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] drm/i915/display: update audio support based on the available frequencies
  • From: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] drm/i915/display: Fix Panel Replay vblank enable workaround
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 1/2] drm/i915/display: Add own counter for Panel Replay vblank workaround
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 9/9] drm/i915/display: update audio bw calculations for MTL
  • From: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] drm/i915/display: iterare through channels if no feasible frequencies
  • From: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
• Re: [core-for-CI PATCH] Revert "platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended"
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: "Govindapillai, Vinod" <vinod.govindapillai@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 4/4] drm/i915/pmu: Add support for gen2
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 2/4] drm/i915/gt: s/gen3/gen2/
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915/gt: Nuke gen2_irq_{enable,disable}()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 2/2] drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 1/2] drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 02/10] drm/i915/xe3lpd: Adjust watermark calculations
  • From: "Govindapillai, Vinod" <vinod.govindapillai@xxxxxxxxx>
• RE: [PATCH] drm/i915/dmc: Add dmc null check
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915/irq: s/gen3/gen2/
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cdclk: Check cdclk value before division
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: "Upadhyay, Tejas" <tejas.upadhyay@xxxxxxxxx>
• Re: [PATCH] drm/i915: Remove unused underrun interrupt bits
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• [PATCH] drm/xe/mmap: Add mmap support for PCI memory barrier
  • From: Tejas Upadhyay <tejas.upadhyay@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH i-g-t] xe: Add test to check pci memory barrier capability
  • From: Tejas Upadhyay <tejas.upadhyay@xxxxxxxxx>
• Re: [PATCH] drm/i915/hdcp: Move dig_port assignment lower in the sequence
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Allow fastset for change in HDR infoframe (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dmc: Add dmc null check
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [v2] drm/i915: Allow fastset for change in HDR infoframe
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/cdclk: Check cdclk value before division
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v13 1/3] drm/i915/vrr: Add helper to check if vrr possible
  • From: "Golani, Mitulkumar Ajitkumar" <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• RE: [PATCH v13 3/3] drm/i915/panelreplay: Panel replay workaround with VRR
  • From: "Golani, Mitulkumar Ajitkumar" <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• RE: [PATCH v13 3/3] drm/i915/panelreplay: Panel replay workaround with VRR
  • From: "Golani, Mitulkumar Ajitkumar" <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• RE: [PATCH v13 2/3] drm/i915/vrr: Split vrr-compute-config in two phases
  • From: "Golani, Mitulkumar Ajitkumar" <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• RE: [PATCH v13 1/3] drm/i915/vrr: Add helper to check if vrr possible
  • From: "Golani, Mitulkumar Ajitkumar" <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• Re: [PATCH] drm/i915/cdclk: Check cdclk value before division
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] drm/i915/xe3lpd: Add new display power wells
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] drm/i915/color: Use correct variable to load lut
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/cdclk: Check cdclk value before division
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915/color: Use correct variable to load lut
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dmc: Add dmc null check
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/10] drm/i915/xe3lpd: Add powerdown value of eDP over type c
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/10] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Remove unused underrun interrupt bits
  • From: "Vivekanandan, Balasubramani" <balasubramani.vivekanandan@xxxxxxxxx>
• Re: [PATCH v13 3/3] drm/i915/panelreplay: Panel replay workaround with VRR
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [v2] drm/i915: Allow fastset for change in HDR infoframe
  • From: Chaitanya Kumar Borah <chaitanya.kumar.borah@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/color: Use correct variable to load lut
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 1/3] drm/i915/vrr: Add helper to check if vrr possible
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/hdcp: Move dig_port assignment lower in the sequence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/dmc: Add dmc null check
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH] drm/i915/color: Use correct variable to load lut
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/color: Use correct variable to load lut
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/hdcp: Move dig_port assignment lower in the sequence
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• linux-next: build warning after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/active: Use try_cmpxchg() in active_fence_cb()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 08/10] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: "Chauhan, Shekhar" <shekhar.chauhan@xxxxxxxxx>
• Re: [PATCH 10/10] drm/i915/xe3lpd: Add powerdown value of eDP over type c
  • From: "Chauhan, Shekhar" <shekhar.chauhan@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm/ttm: Change ttm_device_init to use a struct instead of multiple bools
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/dp_mst: Fix dsc mst bw overhead calculation
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/xe: Separate the d3cold and non-d3cold runtime PM handling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Revert "platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Fuse bit for power management disable removed
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/ci: add new devices for testing
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add xe3lpd edp enabling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add xe3lpd edp enabling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Add xe3lpd edp enabling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 05/10] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 01/10] drm/i915/xe3lpd: reuse xe2lpd definition
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [no subject]
  • From: Unknown
• [PATCH 07/10] drm/i915/xe3lpd: Add C20 Phy consolidated programming table
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 09/10] drm/i915/xe3lpd: Add check to see if edp over type c is allowed
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 04/10] drm/i915/xe3lpd: Update pmdemand programming
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 10/10] drm/i915/xe3lpd: Add powerdown value of eDP over type c
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 08/10] drm/i915/xe3lpd: Add new bit range of MAX swing setup
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 06/10] drm/i915/xe3lpd: Add macro to choose HDCP_LINE_REKEY bit
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 05/10] drm/i915/xe3lpd: Add cdclk changes
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 02/10] drm/i915/xe3lpd: Adjust watermark calculations
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 03/10] drm/i915/xe3lpd: Add new display power wells
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 01/10] drm/i915/xe3lpd: reuse xe2lpd definition
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• [PATCH 00/10] Add xe3lpd edp enabling
  • From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: gen2 stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: gen2 stuff
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Fuse bit for power management disable removed
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PATCH 4/4] drm/i915/pmu: Add support for gen2
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915/irq: s/gen3/gen2/
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915/gt: s/gen3/gen2/
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/4] drm/i915/gt: Nuke gen2_irq_{enable,disable}()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/4] drm/i915: gen2 stuff
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 12/12] drm/client: Add client-lib module
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 11/12] drm/client: Make client support optional
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 10/12] drm/radeon: Suspend and resume clients with client helpers
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 09/12] drm/nouveau: Suspend and resume clients with client helpers
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 08/12] drm/amdgpu: Suspend and resume internal clients with client helpers
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 07/12] drm/client: Move suspend/resume into DRM client callbacks
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 06/12] drm/client: Move client event handlers to drm_client_event.c
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 05/12] drm/fbdev: Store fbdev module parameters in separate file
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 04/12] drm/fbdev: Select fbdev I/O helpers from modules that require them
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 03/12] drm/fbdev-dma: Select FB_DEFERRED_IO
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 02/12] drm/xe: Select DRM_CLIENT_SELECTION
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH v3 01/12] drm/i915: Select DRM_CLIENT_SELECTION
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Miscelaneous fixes for display tracepoints (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] drm/client: Make copies of modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] drm/client: s/unsigned int i/int i/
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/31] drm/xe/display: Spin-off xe_display runtime/d3cold sequences
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 04/31] drm/i915/display: Move shutdown sequences under display driver
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• RE: [PATCH 00/31] Reconcile i915's and xe's display power mgt sequences
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v7 1/5] drm: Introduce device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• RE: [PATCH 31/31] drm/{i915, xe}/display: Consolidade entire runtime pm sequence
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 30/31] drm/xe/display: Add missing power display handling on non-d3cold rpm
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 29/31] drm/xe/display: Kill crtc commit flush
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 28/31] drm/xe/display: Move display runtime suspend to a later point
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 27/31] drm/xe/display: Notify opregion upon runtime suspend/resume non-d3cold
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 26/31] drm/xe/display: Add missing watermark ipc update at runtime resume
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 25/31] drm/xe/display: Move hpd_poll calls to later runtime stages
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 24/31] drm/xe/display: Call intel_hpd_init on every runtime resume
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 23/31] drm/xe/display: Prepare runtime pm functions
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp: Add FEC Enable Retry mechanism (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 22/31] drm/i915/display: Move runtime pm related calls under intel_display_driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 21/31] drm/{i915, xe}/display: Move dsm registration under intel_driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm: Introduce DRM client library (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [v2] drm/i915/dp: Add FEC Enable Retry mechanism
  • From: Chaitanya Kumar Borah <chaitanya.kumar.borah@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: move segment iterator to match current offset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm: Introduce DRM client library (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm: Introduce DRM client library (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] drm/i915/display: create a common function to check validity of ELD
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 7/9] drm/i915/display: update audio support based on the available frequencies
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 1/9] drm/i915/display: get rid of encoder param in intel_audio_compute_config
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for prunue audio frequencies based on bw limits for DP2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 10/12] drm/radeon: Suspend and resume clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 07/12] drm/client: Move suspend/resume into DRM client callbacks
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 12/12] drm/client: Add client-lib module
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 11/12] drm/client: Make client support optional
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 05/12] drm/fbdev: Store fbdev module parameters in separate file
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 04/12] drm/fbdev: Select fbdev I/O helpers from modules that require them
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 08/12] drm/amdgpu: Suspend and resume internal clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 03/12] drm/fbdev-dma: Select FB_DEFERRED_IO
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 06/12] drm/client: Move client event handlers to drm_client_event.c
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 09/12] drm/nouveau: Suspend and resume clients with client helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 01/12] drm/i915: Select DRM_CLIENT_SELECTION
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 02/12] drm/xe: Select DRM_CLIENT_SELECTION
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v3 00/12] drm: Introduce DRM client library
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for prunue audio frequencies based on bw limits for DP2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for prunue audio frequencies based on bw limits for DP2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/15] drm/i915/display: use a macro to define platform enumerations
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v3 03/15] drm/i915/display: use a macro to define platform enumerations
  • From: Michal Wajdeczko <michal.wajdeczko@xxxxxxxxx>
• Re: [PATCH v3 06/15] drm/i915/display: add display platforms structure with platform members
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v3 03/15] drm/i915/display: use a macro to define platform enumerations
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915: move segment iterator to match current offset
  • From: Krzysztof Karas <krzysztof.karas@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915: Enable 10bpc + CCS on TGL+
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 9/9] drm/i915/display: update audio bw calculations for MTL
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 8/9] drm/i815/disaply: limit the audio bw check with DP2 config
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 7/9] drm/i915/display: update audio support based on the available frequencies
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 6/9] drm/i915/display: iterare through channels if no feasible frequencies
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 5/9] drm/i915/display: check and prune audio frequencies based on bw limits
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 4/9] drm/i915/display: update logic to determine crtcstate has audio support
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 3/9] drm/i915/display: update call to intel_dp_audio_compute_config
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 2/9] drm/i915/display: create a common function to check validity of ELD
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 1/9] drm/i915/display: get rid of encoder param in intel_audio_compute_config
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH 0/9] prunue audio frequencies based on bw limits for DP2
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• Re: [PATCH v2 2/2] drm/i915/psr: Implement Wa 14019834836
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: "Pottumuttu, Sai Teja" <sai.teja.pottumuttu@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for Implement Wa 14019834836 (rev2)
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• linux-next: build warning after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/active: Use try_cmpxchg() in active_fence_cb()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: warning for drm/i915/active: Use try_cmpxchg() in active_fence_cb()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/xe: Separate the d3cold and non-d3cold runtime PM handling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/dg2: enable G8 with a workaround
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dg2: enable G8 with a workaround
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Revert "platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/xe: Reduce flickering when inheriting BIOS fb. (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/psr: Implement WA to help reach PC10 (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Fuse bit for power management disable removed
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/ci: add new devices for testing
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/ci: add new devices for testing
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the drm-xe tree with the drm-misc-fixes tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: [PATCH 20/31] drm/xe/display: Align suspend sequence with i915
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 19/31] drm/xe/display: Align display resume sequence with i915
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 18/31] drm/i915/display: Split resume_noirq calls for now
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 17/31] drm/{i915, xe}: Move remaining intel_power_domains to intel_display
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 16/31] drm/{i915, xe}: Move power_domains suspend/resume to display_power
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for DP DSC min/max src bpc fixes (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 15/31] drm/xe/display: Delay dsm handler registration
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 14/31] drm/i915/display: Move resume sequences to intel_display_driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 13/31] drm/{i915,xe}: Consolidate display suspend functions
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 12/31] drm/i915: Remove lingering pci_save_state
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 11/31] drm/{i915, xe}: Consolidate display resume functions
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 10/31] drm/xe/display: Spin-off xe_display runtime/d3cold sequences
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v3 03/15] drm/i915/display: use a macro to define platform enumerations
  • From: Michal Wajdeczko <michal.wajdeczko@xxxxxxxxx>
• RE: [PATCH 09/31] drm/xe/display: Delay hpd_init resume
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 08/31] drm/i915/display: Move suspend sequences to intel_display_driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v3 06/15] drm/i915/display: add display platforms structure with platform members
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 05/15] drm/i915/display: convert display platforms to lower case
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 04/15] drm/i915/display: join the platform and subplatform enums
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 03/15] drm/i915/display: use a macro to define platform enumerations
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• RE: [PATCH 07/31] drm/{i915, xe}/display: Move DP MST calls to display_driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 06/31] drm/xe: Use i915-display shutdown sequence directly
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 05/31] drm/xe: At shutdown disable commit helpers instead of flushing
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v3 02/15] drm/i915/display: use a macro to initialize subplatforms
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 01/15] drm/i915/display: reindent subplatform initialization
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/icl: Update csc and gamma enable checks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][next] drm/i915/display: Fix spelling mistake "Uncomressed" -> "Uncompressed"
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• RE: [PATCH 04/31] drm/i915/display: Move shutdown sequences under display driver
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 03/31] drm/i915/display: Move regfile registers intel_display.restore
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 02/31] drm/i915/display: Convert i915_suspend into i9xx_display_sr
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 01/31] drm/i915: Remove vga and gmbus seq out of i915_restore_display
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 01/12] drm/xe/display: Handle stolen bar readout in the same way as lmem
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 1/2] drm/xe: Separate the d3cold and non-d3cold runtime PM handling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 10/12] drm/xe: Make xe_ggtt_pt_ops private
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• RE: [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 1/2] drm/xe: Separate the d3cold and non-d3cold runtime PM handling
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• [PATCH] drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH v3 11/12] drm/xe/display: Stop dereferencing ggtt in xe_fb_pin
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't allow tile4 framebuffer to do hflip on Xe2
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH v1 1/3] drm/ci: refactor software-driver stage jobs
  • From: Daniel Stone <daniel@xxxxxxxxxxxxx>
• Re: [PATCH 06/28] drm/hyperv-drm: Use video aperture helpers
  • From: Deepak Rawat <drawat.floss@xxxxxxxxx>
• [PATCH] drm/i915/active: Use try_cmpxchg() in active_fence_cb()
  • From: Uros Bizjak <ubizjak@xxxxxxxxx>
• [PATCH 2/2] drm/xe: Add missing HPD interrupt enabling during non-d3cold RPM resume
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 1/2] drm/xe: Separate the d3cold and non-d3cold runtime PM handling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: "Nilawar, Badal" <badal.nilawar@xxxxxxxxx>
• Re: [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: "Nilawar, Badal" <badal.nilawar@xxxxxxxxx>
• [PATCH v1] drm/i915/dg2: enable G8 with a workaround
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2.1 03/12] drm/i915/display: Use async flip when available for initial plane config
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [core-for-CI PATCH] Revert "platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended"
  • From: Luca Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH 8/8] drm/client: s/unsigned int i/int i/
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 4/8] drm/client: Make copies of modes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v1 3/3] drm/ci: add sm8350-hdk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/i915/psr: Implement WA to help reach PC10
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm/ttm: Change ttm_device_init to use a struct instead of multiple bools
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v2 10/11] drm/client: Make client support optional
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/8] drm/client: Constify modes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/8] drm/client: Constify modes
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• [PATCH] drm/i915/display: Fuse bit for power management disable removed
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/fbdev: Select fbdev I/O helpers from modules that require them
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915: Enable 10bpc + CCS on TGL+
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Remove kstrdup_const() and kfree_const() usage
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 2/7] drm/i915: Disable compression tricks on JSL
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/ttm: Change ttm_device_init to use a struct instead of multiple bools
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/ttm: Change ttm_device_init to use a struct instead of multiple bools
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] drm/i915: s/gen12/tgl/ in the universal plane code
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH 6/7] drm/i915: Drop GEN12_MC_CCS check from skl_plane_max_width()
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH 5/7] drm/i915: Enable fp16 + CCS on TGL+
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH 4/7] drm/i915: Enable 10bpc + CCS on ICL
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915: Enable 10bpc + CCS on TGL+
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH v1 3/3] drm/ci: add sm8350-hdk
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v1 2/3] drm/ci: add dedede
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v3 10/12] drm/xe: Make xe_ggtt_pt_ops private
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v1 1/3] drm/ci: refactor software-driver stage jobs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v1 0/3] drm/ci: add new devices for testing
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH 2/7] drm/i915: Disable compression tricks on JSL
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH v3 03/12] drm/i915/display: Use async flip when available for initial plane config
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev2)
  • From: "Saarinen, Jani" <jani.saarinen@xxxxxxxxx>
• RE: ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev2)
  • From: "Saarinen, Jani" <jani.saarinen@xxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev2)
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev2)
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for Miscelaneous fixes for display tracepoints (rev2)
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v3 0/8] drm/i915: PREEMPT_RT related fixups.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: ✗ Fi.CI.IGT: failure for drm/i915/selftests: Implement frequency logging for energy reading validation (rev3)
  • From: "Anirban, Sk" <sk.anirban@xxxxxxxxx>
• RE: ✗ Fi.CI.IGT: failure for drm/i915/selftests: Implement frequency logging for energy reading validation (rev3)
  • From: "Anirban, Sk" <sk.anirban@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: Remove kstrdup_const() and kfree_const() usage
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915: use NULL for zero wakeref_t instead of plain integer 0
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 08/28] drm/loongson: Use video aperture helpers
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• Re: [PATCH v3 0/8] drm/i915: PREEMPT_RT related fixups.
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Allow fastset for change in HDR infoframe
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] drm/i915: PREEMPT_RT related fixups.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] drm/i915: PREEMPT_RT related fixups.
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] drm/i915: PREEMPT_RT related fixups.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 12/12] drm/xe: Move struct xe_ggtt to xe_ggtt.c
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3 10/12] drm/xe: Make xe_ggtt_pt_ops private
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3 09/12] drm/xe: Abstract read/write functions for GGTT PTEs
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3 08/12] drm/xe: Add xe_ggtt_alloc
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3 07/12] drm/xe: Add xe_ggtt_might_lock
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v3 06/12] drm/xe: Use xe_ggtt_map_bo_unlocked for resume
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• linux-next: manual merge of the drm-xe tree with the drm-misc-fixes tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: use NULL for zero wakeref_t instead of plain integer 0
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: add dedicated lock for each sideband
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/13] drm/i915: Use DSB for plane/color management commits
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] tests/xe_gt_freq: Use sync reset
  • From: "Dixit, Ashutosh" <ashutosh.dixit@xxxxxxxxx>
• Re: [PATCH v3 03/12] drm/i915/display: Use async flip when available for initial plane config
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/12] drm/i915/display: Use async flip when available for initial plane config
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/12] drm/i915/display: Use async flip when available for initial plane config
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/display: Remove kstrdup_const() and kfree_const() usage
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/psr: Implement WA to help reach PC10
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/xe: Reduce flickering when inheriting BIOS fb.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Retry RING_HEAD reset until it sticks (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>