Linux Device-Mapper Development

• Thread Index

• Re: [PATCH 09/60] dm: dm.c: replace 'bio->bi_vcnt == 1' with !bio_multiple_segments
  • From: Kent Overstreet <kent.overstreet@xxxxxxxxx>
• [PATCH] multipathd: "show map mpathx json" would cause realloc error possibly
  • From: tang.wenjun3@xxxxxxxxxx
• Re: [PATCH] multipathd: remove unnecessary condition in check_path
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] multipathd: "show map mpathx json" would cause realloc error possibly
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] hwe_regmatch: match error
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] segment faulty occured in add_feature()
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] multipath-tools: clean up and organize libmpathpersist/mpath_persistent_reserve_{out, in}.3
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipathd/main.c:change the loglevel from 1/2 to 0
  • From: li.minghui7@xxxxxxxxxx
• Re: [PATCH 09/60] dm: dm.c: replace 'bio->bi_vcnt == 1' with !bio_multiple_segments
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 00/60] block: support multipage bvec
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 00/60] block: support multipage bvec
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Multipaths getting cross-linked on IBM Power-8 after adding wwids
  • From: "Andy D'Arcy Jewell" <Andy.D'ArcyJewell@xxxxxxxxxxxx>
• [PATCH] multipathd: remove unnecessary condition in check_path
  • From: peng.liang5@xxxxxxxxxx
• Re: [PATCH] mpathpersistent: segment faulty occured in mpath_persistent_reserve_in()
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] hwe_regmatch: match error
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] add_feature: coredump
  • From: huang.wei56@xxxxxxxxxx
• [PATCH] segment faulty occured in add_feature()
  • From: huang.wei56@xxxxxxxxxx
• [PATCH] multipath-tools: clean up and organize mpathpersist/mpathpersist.8
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: REQ_OP for zeroing, was Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH 09/60] dm: dm.c: replace 'bio->bi_vcnt == 1' with !bio_multiple_segments
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] do not allow in-use path to change wwid
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: dm-era: metadata reuse after reboot possible?
  • From: Edward Thornber <thornber@xxxxxxxxxx>
• [PATCH 09/60] dm: dm.c: replace 'bio->bi_vcnt == 1' with !bio_multiple_segments
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 07/60] dm: crypt: use bio_add_page()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 08/60] dm: use bvec iterator helpers to implement .get_page and .next_page
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 00/60] block: support multipage bvec
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 29/60] dm: limit the max bio size as BIO_SP_MAX_SECTORS << SECTOR_SHIFT
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 58/60] dm-crypt: convert to bio_for_each_segment_all_rd()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 02/60] block drivers: convert to bio_init_with_vec_table()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] Remove duplicated code in mpath_alloc_prin_response()
  • From: ding.yemin@xxxxxxxxxx
• Re: [PATCH] Remove duplicated code in mpath_alloc_prin_response()
  • From: ding.yemin@xxxxxxxxxx
• Re: [PATCH 10/10] set retrigger_tries to 0 for multipath
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 09/10] add disable_changed_wwids option
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 08/10] fix INIT_REQUESTED_UDEV code
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 07/10] recover from errors in multipathd startup
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 06/10] multipath: set cookie before using it.
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 05/10] mpath: don't wait for udev if all paths are down
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/10] multipathd: add "map failures" format wildcard
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 03/10] do not allow in-use path to change wwid
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/10] kpartx.rules: respect skip_kpartx flag
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 01/10] libmultipath: add skip_kpartx option
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 04/10] multipathd: add "map failures" format wildcard
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 02/10] kpartx.rules: respect skip_kpartx flag
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 10/10] set retrigger_tries to 0 for multipath
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 00/10] misc. multipath patches.
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH] Remove duplicated code in mpath_alloc_prin_response()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH] multipath-tools: clean up and organize multipathd/multipathd.8
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: clean up and organize kpartx/kpartx.8
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: REQ_OP for zeroing, was Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH] md/dm-mpath: Add NULL pointer check in parse_hw_handler()
  • From: tang.junhui@xxxxxxxxxx
• [git pull] device mapper fixes for 4.9-rc3
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH] RCU protection for variable conf in add_map_with_path()
  • From: ding.yemin@xxxxxxxxxx
• [PATCH] [linux-next] Doc: dm raid: Fix typo in dm-raid.txt
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• Re: [PATCH] scsi: update rdac devices at scsi_dh_rdac
  • From: Babu Moger <babu.moger@xxxxxxxxxx>
• [PATCH 06/10] multipath: set cookie before using it.
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 09/10] add disable_changed_wwids option
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 05/10] mpath: don't wait for udev if all paths are down
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 08/10] fix INIT_REQUESTED_UDEV code
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 07/10] recover from errors in multipathd startup
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 01/10] libmultipath: add skip_kpartx option
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH 03/10] do not allow in-use path to change wwid
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] block: disallow changing max_sectors_kb on a request stacking device
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH] add_feature: coredump
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH] multipathd/main.c: delete redundant judgment before LOG_MSG()
  • From: li.minghui7@xxxxxxxxxx
• [PATCH] dm: do not assign error to md->kworker_task
  • From: Tahsin Erdogan <tahsin@xxxxxxxxxx>
• [PATCH] Add break for switch-case in prin_do_scsi_ioctl().
  • From: ding.yemin@xxxxxxxxxx
• [PATCH] add_feature: coredump
  • From: huang.wei56@xxxxxxxxxx
• [PATCH] Add break for switch-case in prin_do_scsi_ioctl().
  • From: ding.yemin@xxxxxxxxxx
• Re: [PATCH] multipathd: fix issue in 'map $map getprstatus' reply
  • From: peng.liang5@xxxxxxxxxx
• [PATCH] Remove duplicated code in mpath_alloc_prin_response()
  • From: ding.yemin@xxxxxxxxxx
• [PATCH] hwe_regmatch: match error
  • From: huang.wei56@xxxxxxxxxx
• Re: REQ_OP for zeroing, was Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH] multipath-tools: alua: replace lba state message
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: alua: add prefix with device name for asymmetric access state and reported target port group messages
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: clean up and organize multipath/multipath.8
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] libmultipath: safe limit max_fds
  • From: peng.liang5@xxxxxxxxxx
• [PATCH] mpathpersistent: segment faulty occured in mpath_persistent_reserve_in()
  • From: tang.wenji@xxxxxxxxxx
• Re: [PATCH] libmultipath: I/O access overrun occured in mutipath device under the displayed capacity
  • From: zhou.guichun@xxxxxxxxxx
• 答复: Re: [PATCH 1/2] multipath-tools: replace static and define default values for config options
  • From: zhou.guichun@xxxxxxxxxx
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• REQ_OP for zeroing, was Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH 1/4] brd: handle misaligned discard
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 4/4] brd: remove unused brd_zero_page
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH 3/4] brd: implement discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH 2/4] brd: extend rcu read sections
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH 0/4] brd: support discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH 1/4] brd: handle misaligned discard
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH 1/2] multipath-tools: replace static and define default values for config options
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] libmultipath: I/O access overrun occured in mutipath device under the displayed capacity
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH] multipath-tools: alua: replace output for reserved return codes
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add SUN ZFS Storage Appliances to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] libmultipath: I/O access overrun occured in mutipath device under the displayed capacity
  • From: zhou.guichun@xxxxxxxxxx
• [PATCH 1/2] multipath-tools: replace static and define default values for config options
  • From: zhou.guichun@xxxxxxxxxx
• [PATCH] multipath-tools: add StorageTek BladeStore to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: identify STK/SUN array
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: dm block manager: use do/while(0) for empty macros
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] dm block manager: use do/while(0) for empty macros
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: how to refresh LV to apply fstrim online
  • From: Gianluca Cecchi <gianluca.cecchi@xxxxxxxxx>
• Re: [PATCH] brd: remove support for BLKFLSBUF
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH] brd: remove support for BLKFLSBUF
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: how to refresh LV to apply fstrim online
  • From: Zdenek Kabelac <zkabelac@xxxxxxxxxx>
• Re: how to refresh LV to apply fstrim online
  • From: Gianluca Cecchi <gianluca.cecchi@xxxxxxxxx>
• Re: device mapper and the BLKFLSBUF ioctl
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] multipath-tools: add support all STK OPENstorage rdac arrays
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH v2] multipath-tools: add support all STK OPENstorage rdac arrays
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add support all STK OPENstorage rdac arrays
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] libmultipath: fix setting of fast_io_fail_tmo
  • From: peng.liang5@xxxxxxxxxx
• Re: [PATCH 06/15] libmultipath: Remove an unused function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 06/15] libmultipath: Remove an unused function
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: device mapper and the BLKFLSBUF ioctl
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 06/15] libmultipath: Remove an unused function
  • From: Germano Percossi <germano.percossi@xxxxxxxxxx>
• [PATCH] multipath-tools: identify SUN/T4 as 6020 and 6120
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 06/15] libmultipath: Remove an unused function
  • From: Germano Percossi <germano.percossi@xxxxxxxxxx>
• [PATCH] multipath-tools: identify more arrays in hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: convert kpartx/lopart.c to UTF-8 to fix Arkadiusz's name
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] scsi: update rdac devices at scsi_dh_rdac
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: add FUJITSU/ETERNUS 2000/4000/8000 to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 16/18] multipath-tools: Use ALUA for HP 3PAR
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add missing options and fix comments in hwtable's TEMPLATE
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] [linux-next] Doc: dm raid: Fix typo in dm-raid.txt
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: device mapper and the BLKFLSBUF ioctl
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: device mapper and the BLKFLSBUF ioctl
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH 15/15] kpartx: Move the declaration of a global variable from .c to .h
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 14/15] libmultipath/checkers: Make the compiler check the checker function prototypes
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 13/15] libmultipath/prioritizers: Make getprio() prototypes consistent
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 12/15] Use NULL instead of 0 where a pointer is expected
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 11/15] libmpathpersist: Move the definition of a global variable from .h to .c
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 10/15] libmultipath: Move the definition of a global variable from .h to .c
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 09/15] libmultipath/checkers/rbd: Use unsigned int for one-bit bitfields
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 08/15] libmultipath: Remove an unused variable
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 07/15] libmpathpersist: Remove an unused function
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 06/15] libmultipath: Remove an unused function
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 05/15] libmultipath: Fix POLLIN checks
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 03/15] libmultipath: Remove an incorrect comment
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 02/15] libmultipath: Avoid that thread cancellation causes a hang
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 04/15] libmultipath: Move setup_thread_attr() from uevent.c into util.c
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 01/15] libmultipath: Make building against musl-libc again possible
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 0/15] Fifteen multipath-tools patches
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• device mapper and the BLKFLSBUF ioctl
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• dm-era: metadata reuse after reboot possible?
  • From: Markus Hentsch <markus.hentsch@xxxxxxxxxxxxxxxx>
• Re: md/dm-table: tgt->type should be putted in dm_table_add_target()
  • From: tang.junhui@xxxxxxxxxx
• Re: md/dm-table: tgt->type should be putted in dm_table_add_target()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH] md/dm-table: tgt->type should be putted in dm_table_add_target()
  • From: tang.junhui@xxxxxxxxxx
• Re: how to refresh LV to apply fstrim online
  • From: Gianluca Cecchi <gianluca.cecchi@xxxxxxxxx>
• [PATCH] multipath-tools: replace pthread_yield with sched_yield
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 2/2] multipathd: Avoid that a deadlock is triggered sporadically during shutdown
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 2/2] multipathd: Avoid that a deadlock is triggered sporadically during shutdown
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add Infortrend arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: DF arrays were sold also under HP mark
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: how to refresh LV to apply fstrim online
  • From: Zdenek Kabelac <zkabelac@xxxxxxxxxx>
• how to refresh LV to apply fstrim online
  • From: Gianluca Cecchi <gianluca.cecchi@xxxxxxxxx>
• [PATCH] multipath-tools: add Promise arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add DDN and rebranded arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] device mapper ioctl
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: replace static and define default values for config options
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: replace static and define default values for config options
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: Device-mapper target driver for Write tracking
  • From: Zdenek Kabelac <zkabelac@xxxxxxxxxx>
• Re: Device-mapper target driver for Write tracking
  • From: Daniel Armbruster <dani.armbruster@xxxxxx>
• Re: Device-mapper target driver for Write tracking
  • From: Zdenek Kabelac <zkabelac@xxxxxxxxxx>
• Device-mapper target driver for Write tracking
  • From: Daniel Armbruster <dani.armbruster@xxxxxx>
• 转发: Re: [PATCH 1/3] segment faulty occured in dm_get_status()
  • From: 唐军辉 <tang.junhui@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: integrate Changelog file in README and update it
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: space \ at Makefile.inc
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: replace hardcoded USER_FRIENDLY_NAMES_OFF by default
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: replace IO by I/O in multipath.conf.5
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: clarify no_path_retry in multipath.conf.5
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: fix DEFAULT values
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: replace static value with default_variable for flush_on_last_del
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 1/3] segment faulty occured in dm_get_status()
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipathd/main.c: delete redundant judgment before LOG_MSG()
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 2/3] access vecs memory outside of locking range in check_path()
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: integrate Changelog file in README and update it
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: space \ at Makefile.inc
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: dm: do not assign error to md->kworker_task
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: replace hardcoded USER_FRIENDLY_NAMES_OFF by default
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] multipathd/main.c: delete redundant judgment before LOG_MSG()
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] scsi_devinfo: apply to HP-rebranded same options as Hitachi
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 3/3] Treat PATH_TIMEOUT as PATH_DOWN
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH 2/3] access vecs memory outside of locking range in check_path()
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH 1/3] segment faulty occured in dm_get_status()
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] dm raid: correct error messages on old metadata validation
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: [PATCH] scsi: update rdac devices at scsi_dh_rdac
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: replace hardcoded USER_FRIENDLY_NAMES_OFF by default
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH 2/3] access vecs memory outside of locking range in check_path()
  • From: tang.junhui@xxxxxxxxxx
• [PATCH 1/3] segment faulty occured in dm_get_status()
  • From: tang.junhui@xxxxxxxxxx
• [PATCH 3/3] Treat PATH_TIMEOUT as PATH_DOWN
  • From: tang.junhui@xxxxxxxxxx
• [PATCH] multipath-tools: replace IO by I/O in multipath.conf.5
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: clarify no_path_retry in multipath.conf.5
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] dm raid: fix activation of exisiting raid4/10 mapped devices
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: fix DEFAULT values
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: replace static value with default_variable for flush_on_last_del
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: fix DEFAULT values
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: fix DEFAULT values
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: add VIOLIN arrays to hardware table
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: release lock on handler failure
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: release lock on handler failure
  • From: Michael Wang <yun.wang@xxxxxxxxxxxxxxxx>
• Re: [PATCH] add_feature: coredump
  • From: huang.wei56@xxxxxxxxxx
• Patch added to scsi: scsi: Replace wrong device handler name for CLARiiON arrays
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] multipath-tools: use internal drd.h file
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: use internal drd.h file
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] multipath-tools: add VIOLIN arrays to hardware table
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH RFC] multipath-tools: replace multipath configuration output
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: merge dcssblk in similar blacklist regex
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: use internal drd.h file
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: merge dcssblk in similar blacklist regex
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: use internal drd.h file
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 0/5] rbd checker fixes
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 0/2] Two multipath-tools bug fixes
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: add VIOLIN arrays to hardware table
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• [PATCH] multipath-tools: add missing hardware handler to ALUA devices
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH 2/2] multipathd: Avoid that a deadlock is triggered sporadically during shutdown
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 1/2] multipathd: Avoid "socket operation on non-socket" errors
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 0/2] Two multipath-tools bug fixes
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] add_feature: coredump
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] hwe_regmatch: match error
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] multipathd: "show map mpathx json" would cause realloc error possibly
  • From: tang.wenjun3@xxxxxxxxxx
• sendmail mistake
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 21/94] multipath-tools: standardize all RDAC devices
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 19/94] multipath-tools: add Oracle FS to hwtable
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 23/94] multipath-tools: remove patchwork reference
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 24/94] multipath-tools: document vendor, product, revision and bl_product are POSIX Extended regex
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 22/94] multipath-tools: add IBM/1813 - DCS3860 to hwtable
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 15/94] multipath-tools: replace (|) with [] when there is one element
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 17/94] multipath-tools: replace "." for real values in (COMPAQ|HP)/"(MSA|HSV)1.0"
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 20/94] multipath-tools: remove blank line at multipath.conf.5
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 18/94] multipath-tools: SGI/TP9300 is a RDAC array
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 14/94] multipath-tools: remove pgpolicy=FAILOVER from Ceph/RBD
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 13/94] multipath-tools: identify more devices at hwtable
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 12/94] multipath-tools: add support for all IBM Enterprise Storage Server / Shark family
  • From: tang.wenjun3@xxxxxxxxxx
• [PATCH 16/94] multipath-tools: replace spaces with a regex in IBM/"3303 NVDISK"
  • From: tang.wenjun3@xxxxxxxxxx
• Re: [PATCH] multipathd: fix issue in 'map $map getprstatus' reply
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• thin pool performance bottleneck
  • From: Ryan Norwood <ryan.p.norwood@xxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Yibin Wang <wangyibin@xxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Yibin Wang <wangyibin@xxxxxxxxxx>
• Re: [PATCH] multipathd: fix issue in 'map $map getprstatus' reply
  • From: peng.liang5@xxxxxxxxxx
• Re: [PATCH] libmultipath: remove redundant code in store_pathinfo
  • From: peng.liang5@xxxxxxxxxx
• [PATCH v2] dm raid1: "mirror" target doesn't use all available legs on multiple failures
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• [PATCH] multipath-tools: add Xiotech ISE arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: add IBM/FlashSystem to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipathd: fix issue in 'map $map getprstatus' reply
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: preload also scsi_dh_hp_sw before run multipathd
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: preload also scsi_dh_hp_sw before run multipathd
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] multipath-tools: preload also scsi_dh_hp_sw before run multipathd
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: release lock on handler failure
  • From: Michael Wang <yun.wang@xxxxxxxxxxxxxxxx>
• Re: 答复: [RFC] unreleased lock after handler failure
  • From: Michael Wang <yun.wang@xxxxxxxxxxxxxxxx>
• 答复: [RFC] unreleased lock after handler failure
  • From: tang.junhui@xxxxxxxxxx
• [RFC] unreleased lock after handler failure
  • From: Michael Wang <yun.wang@xxxxxxxxxxxxxxxx>
• [PATCH 4/9] tests/ioctl_dm: whitespace
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• Re: [PATCH] multipathd: fix issue in 'map $map getprstatus' reply
  • From: peng.liang5@xxxxxxxxxx
• [PATCH 6/9] tests/ioctl_dm: overly long string printing checks
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 8/9] tests: Add ioctl_dm to .gitignore
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 5/9] dm: Fix comma printing for the case when dm_target_msg structure is inaccessible
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 9/9] tests: Add checks for abbreviated DM ioctl output
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 3/9] tests: Add check for presence of HAVE_LINUX_DM_IOCTL_H macro definition to ioctl_dm test
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 2/9] tests: Add check for printing of overlength strings to ioctl_dm test
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 7/9] tests: Some additional checks for ioctl_dm test
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 1/9] util: Add support for QUOTE_0_TERMINATED in user_style to ptrintstr_ex
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 0/9] Additional checks for strace DM ioctl decoder test
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• 答复: Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] multipathd: fail path when path check timeout
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] multipathd: fail path when path check timeout
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH 00/15] Fifteen multipath-tools patches
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 5/5] rbd: use lock_on_read if set
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 3/5] rbd: check for exclusive lock enabled
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 2/5] rbd: check for nonshared clients
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 1/5] rbd: fix sync repair support
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 4/5] rbd: fixup log messages
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 0/5] rbd checker fixes
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 1/1 V2] dm raid: fix compat_features validation
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• [PATCH 1/1 V2] dm raid: fix compat_features validation
  • From: Andy Whitcroft <apw@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Andy Whitcroft <apw@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: dm raid1: "mirror" target doesn't use all available legs on multiple failures
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: [PATCH 1/1] dm raid: fix compat_features validation
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH 1/1] dm raid: fix compat_features validation
  • From: Andy Whitcroft <apw@xxxxxxxxxxxxx>
• Re: [PATCH] multipath-tools: preload also scsi_dh_hp_sw before run multipathd
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] multipath-tools: preload also scsi_dh_hp_sw before run multipathd
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] multipathd: fail path when path check timeout
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipathd: fail path when path check timeout
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] libmultipath: fix multipath -q command logic
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] multipathd: uxsock_timeout should be assigned by conf->uxsock_timeout
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipathd: uxsock_timeout should be assigned by conf->uxsock_timeout
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] mpathpersist: memset length is wrong
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] dm: free io_barrier after blk_cleanup_queue call
  • From: Tahsin Erdogan <tahsin@xxxxxxxxxx>
• Re: dm: free io_barrier after blk_cleanup_queue call
  • From: Tahsin Erdogan <tahsin@xxxxxxxxxx>
• Re: [PATCH] mpathpersist: memset length is wrong
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] libmultipath/checkers/tur: Fix a recently introduced deadlock
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 15/23] scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] libmultipath/checkers/tur: Fix a recently introduced deadlock
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 15/15] Makefile.inc: Enable -Wextra and -Wformat-nonliteral
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 15/23] scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: dm raid1: "mirror" target doesn't use all available legs on multiple failures
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 00/15] Fifteen multipath-tools patches
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: use internal drd.h file
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 15/15] Makefile.inc: Enable -Wextra and -Wformat-nonliteral
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 15/15] Makefile.inc: Enable -Wextra and -Wformat-nonliteral
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] dm raid1: "mirror" target doesn't use all available legs on multiple failures
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• [PATCH] dm raid1: "mirror" target read error on default leg failure
  • From: Heinz Mauelshagen <heinzm@xxxxxxxxxx>
• Re: dm: free io_barrier after blk_cleanup_queue call
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH] Re: your dm patch for strace
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH 13/21] dm: Move printing of dm_ioctl fields before allocation of extra data
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 15/21] dm: Additional data_size/data_start checks
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 14/21] dm: replace abbrev branching with goto
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 12/21] dm: Add inttypes.h, include reorder
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 07/21] dm: Add definitions for ioctl commands not implemented initially
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 20/21] dm: Fix printing of version field
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 21/21] dm: rewrite structure decoding
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• Re: [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: James Bottomley <jejb@xxxxxxxxxxxxxxxxxx>
• [PATCH 11/21] dm: Compare entering field values with exiting ones
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 19/21] dm: Add check whether command uses parameters
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 06/21] dm: Some future-proofing by means of compile-time DM_VERSION_MAJOR check
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 18/21] tests/ioctl_dm: Allow passing size and data_start to init_s
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 16/21] dm: Add comment regarding intended fall-through in switch statement
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 10/21] dm: use => instead of , for splitting output structure from input
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 02/21] dm: whitespace fixes
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 05/21] xlat: Add values for dm_flags
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 17/21] dm: Add data_size and data_offset fields to output
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 04/21] dm: Minor output tweaks
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 03/21] tests: Working around bounds check
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 09/21] dm: Remove char * cast
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 08/21] dm: Use static constants for offset sizes
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 01/21] tests/ioctl_dm: Formatting
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• [PATCH 00/21] Some possible additions to the DM ioctl patch for strace
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• Re: [PATCH] Re: your dm patch for strace
  • From: Eugene Syromyatnikov <evgsyr@xxxxxxxxx>
• Re: [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: James Bottomley <jejb@xxxxxxxxxxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: wangyibin <wangyibin@xxxxxxxxxx>
• Re: [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] multipath-tools: add Nexsan E-Series and SATABeast/SATABoy to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: add FUJITSU/ETERNUS 2000/4000/8000 to hwtable
  • From: Sebastian Herbszt <herbszt@xxxxxx>
• [PATCH] multipath-tools: use internal drd.h file
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 07/15] multipathd: Fix a data race
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH 00/15] Fifteen multipath-tools patches
  • From: <tang.junhui@xxxxxxxxxx>
• [git pull] device mapper changes for 4.9
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH] scsi: update rdac devices at scsi_dh_rdac
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] scsi: replace wrong device handler name for CLARiiON arrays
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: add IBM/FlashSystem to hwtable
  • From: Steffen Maier <maier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] multipath-tools: add NexGen arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH v2] multipath-tools: add NexGen arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add NexGen arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add IBM/FlashSystem to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add Tegile arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add Kaminario arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add Nimble arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add INFINIDAT arrays to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: remove hwhandler when it's alua
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] Re: your dm patch for strace
  • From: Masatake YAMATO <yamato@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: add HPE StoreVirtual 4000 family(LEFTHAND) to hwtable
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH] multipath-tools: add FUJITSU/ETERNUS 2000/4000/8000 to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: add HPE StoreVirtual 4000 family(LEFTHAND) to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Alasdair G Kergon <agk@xxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Andy Grover <agrover@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: add NetApp/SolidFir to hwtable
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: add NetApp/SolidFir to hwtable
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/15] Fifteen multipath-tools patches
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] multipath-tools: add IBM/3552 (FAStT500) array
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] dm-mpath: Only reprocess queued IO after pg initialization finished
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Alasdair G Kergon <agk@xxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH] multipath-tools: add IBM/3552 (FAStT500) array
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH 15/15] Makefile.inc: Enable -Wextra and -Wformat-nonliteral
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 14/15] libmultipath: Micro-optimize snprint_size()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 11/15] libmultipath/checkers/tur: Protect tur_checker_context.message changes
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 05/15] multipathd, libmultipathd: Make delays independent of clock jumps
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 13/15] libmultipath/checkers/tur: Fix races on tur_checker_context.thread
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 09/15] libmultipath/checkers/tur: Terminate a statement with a semicolon
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 12/15] libmultipath/checkers/tur: Serialize tur_checker_context.devt accesses
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 04/15] libmultipath/checkers/rbd: Declare local functions static
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 10/15] libmultipath/checkers/tur: Move pthread_attr_destroy() call
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 08/15] libmultipath/checkers/tur: Introduce strlcpy()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 07/15] multipathd: Fix a data race
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 03/15] libmultipath/checkers/tur: Declare local functions static
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 02/15] libmultipath/memory: Move an #include directive
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 01/15] libmultipath/prioritizers/ontap: Remove an unused #include directive
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 00/15] Fifteen multipath-tools patches
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: dm: add swap_slot_free_notify handler
  • From: "David Kwon (권원홍)" <wonhong.kwon@xxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] multipathd, libmultipathd: Make delays independent of clock jumps
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 0/9] Generate uevents for all DM events
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH 9/9] dm: Generate uevents for other targets
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 6/9] dm: Rename dm_event_add to dm_event_queue
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 2/9] dm: Move multipath-specific stuff out of dm-uevent.c
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 8/9] dm: Generate uevents for thin targets
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 7/9] dm: Implement dm_uevent_add()
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 5/9] dm: Rename dm_build_uevent to dm_uevent_build
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 3/9] dm: Inline dm_build_path_uevent into dm_path_uevent
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 0/9] Generate uevents for all DM events
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 1/9] dm: Do not export dm_send_uevents
  • From: Andy Grover <agrover@xxxxxxxxxx>
• [PATCH 4/9] dm: Update dm-uevent.txt
  • From: Andy Grover <agrover@xxxxxxxxxx>
• Re: [PATCH] multipath-tools: remove pointless ".*" from devnode blacklists
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• [PATCH] multipath-tools: remove pointless ".*" from devnode blacklists
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: merge emc and dell
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: add Dell EMC Unity documentation
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH] multipath-tools: blacklist "Universal Xport" for IBM/3542
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 2/4] multipath-tools: replace GROUP_BY_SERIAL with MULTIBUS for IBM 3542 and 2105
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: blacklist "Universal Xport" for IBM/3542
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH 3/4] multipath-tools: change default failback from manual to undefined
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 2/4] multipath-tools: replace GROUP_BY_SERIAL with MULTIBUS for IBM 3542 and 2105
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 3/4] multipath-tools: change default failback from manual to undefined
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/2] multipathd, libmultipathd: Make delays independent of clock jumps
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 2/4] multipath-tools: replace GROUP_BY_SERIAL with MULTIBUS for IBM 3542 and 2105
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/2] libmultipath/checkers/{rbd, tur}: Fix pthread_cond_signal() calls
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: Choosing the device name in kpartx.
  • From: "Bryn M. Reeves" <bmr@xxxxxxxxxx>
• Re: Choosing the device name in kpartx.
  • From: Andre Caldas <andre.em.caldas@xxxxxxxxx>
• Re: [PATCH 3/4] multipath-tools: change default failback from manual to undefined
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 4/4] multipath-tools: change default path_grouping_policy from failover to multibus
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH 2/4] multipath-tools: replace GROUP_BY_SERIAL with MULTIBUS for IBM 3542 and 2105
  • From: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
• Re: [PATCH] multipath-tools: request to update man pages/TEMPLATE if "device subsection" keywords are changed
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] md/dm-stats: Use kmalloc_array() in parse_histogram()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 8/9] md/dm-table: Delete an unwanted space in high()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 9/9] md/dm-table: Delete an unwanted space in dm_table_get_integrity_disk()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/9] md/dm-table: Fine-tuning for several function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/9] md/dm-table: Delete an unnecessary variable initialisation in dm_table_register_integrity()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/9] md/dm-table: Use kmalloc_array() in realloc_argv()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/9] md/dm-table: Move an assignment for the variable "end" in dm_split_args()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/9] md/dm-table: Adjust one function call together with a variable assignment
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/9] md/dm-table: Delete an unnecessary variable initialisation in dm_split_args()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/9] md/dm-table: Reduce the scope for a variable in dm_table_verify_integrity()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/9] md/dm-table: Combine substrings for ten messages
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: Choosing the device name in kpartx.
  • From: "Bryn M. Reeves" <bmr@xxxxxxxxxx>
• Re: [PATCH] dm-mpath: Only reprocess queued IO after pg initialization finished
  • From: Junichi Nomura <j-nomura@xxxxxxxxxxxxx>
• Re: [PATCH] Re: your dm patch for strace
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Choosing the device name in kpartx.
  • From: Andre Caldas <andre.em.caldas@xxxxxxxxx>
• Re: [PATCH] dm: Change return type of pg_init_all_paths() from int into void
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH] dm: Change return type of pg_init_all_paths() from int into void
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] dm-mpath: Only reprocess queued IO after pg initialization finished
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] dm: Change return type of pg_init_all_paths() from int into void
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH] dm-mpath: Only reprocess queued IO after pg initialization finished
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: md/dm-crypt: Rename a jump label in crypt_message() ?
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 03/10] md/dm-crypt: Rename a jump label in crypt_message()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• [PATCH 07/10] dm snapshot: Delete an unnecessary variable initialisation in merge_callback()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 03/10] md/dm-crypt: Rename a jump label in crypt_message()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: dm snapshot: Use kmalloc_array() in init_origin_hash() ?
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• [PATCH 04/10] dm snapshot: Rename a jump label in pending_complete()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] dm snapshot: Combine substrings for seven error messages
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/10] dm snapshot: Delete an unnecessary variable initialisation in snapshot_map()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/10] dm snapshot: Delete an unnecessary variable initialisation in remove_single_exception_chunk()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] dm snapshot: Delete two error messages for a failed memory allocation
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/10] dm snapshot: Delete an unnecessary variable initialisation in snapshot_ctr()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] dm snapshot: Delete five unwanted spaces behind "list_for_each_entry"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/10] dm snapshot: Fine-tuning for several function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/10] dm snapshot: Delete unnecessary variable initialisations in pending_complete()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] multipathd, libmultipathd: Make delays independent of clock jumps
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 1/2] libmultipath/checkers/{rbd, tur}: Fix pthread_cond_signal() calls
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 2/3] block: require write_same and discard requests align to logical block size
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH 3/3] block: implement (some of) fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH 1/3] block: invalidate the page cache when issuing BLKZEROOUT.
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH v11 0/3] fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] block: implement (some of) fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] block: implement (some of) fallocate for block devices
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• Re: [PATCH 03/10] md/dm-crypt: Rename a jump label in crypt_message()
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• Re: [PATCH 05/10] md/dm-crypt: Rename a jump label in crypt_set_key()
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• Re: [PATCH 01/10] dm snapshot: Use kmalloc_array() in init_origin_hash()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 05/10] md/dm-crypt: Rename a jump label in crypt_set_key()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/10] md/dm-crypt: Return directly after a failed crypto_alloc_ahash() in crypt_iv_essiv_ctr()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/10] md/dm-crypt: Rename a jump label in crypt_message()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 01/10] md/dm-crypt: Use kcalloc() in crypt_alloc_tfms()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/10] md/dm-crypt: Fine-tuning for five function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] md/dm-crypt: Delete unnecessary variable initialisations in crypt_iv_essiv_ctr()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/10] md/dm-crypt: Rename a jump label in crypt_iv_tcw_whitening()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/10] md/dm-crypt: Delete an unnecessary variable initialisation in crypt_message()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/10] md/dm-crypt: Delete an unnecessary variable initialisation in crypt_set_key()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] md/dm-crypt: Reduce the scope for a variable in crypt_alloc_tfms()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] md/dm-crypt: Two checks and one function call less in crypt_iv_essiv_ctr() after error detection
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] block: implement (some of) fallocate for block devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/3] block: require write_same and discard requests align to logical block size
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/3] block: invalidate the page cache when issuing BLKZEROOUT.
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v2 3/3] block: implement (some of) fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH 3/3] block: implement (some of) fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH 3/3] block: implement (some of) fallocate for block devices
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 1/3] block: invalidate the page cache when issuing BLKZEROOUT.
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 2/3] block: require write_same and discard requests align to logical block size
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH 3/3] block: implement (some of) fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH 1/3] block: invalidate the page cache when issuing BLKZEROOUT.
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• [PATCH v10 0/3] fallocate for block devices
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH 00/10] md/dm-crypt: Fine-tuning for five function implementations
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• dmioscope: visualise IO distribution for DM devices
  • From: "Bryn M. Reeves" <bmr@xxxxxxxxxx>
• Re: [dm-crypt] Hang problem with dm-crypt
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: dm-mpath: always return reservation conflict
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: Usage of dm-era
  • From: Markus Hentsch <markus.hentsch@xxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• current status of lvm cache
  • From: Vasiliy Tolstov <v.tolstov@xxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [PATCH] dm: remove dummy definition of 'struct dm_table'
  • From: Andrey Ryabinin <aryabinin@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] dm crypt: fix crash on exit
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Usage of dm-era
  • From: Markus Hentsch <markus.hentsch@xxxxxxxxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: jiangyiwen <jiangyiwen@xxxxxxxxxx>
• [PATCH] dm: add swap_slot_free_notify handler
  • From: Wonhong Kwon <wonhong.kwon@xxxxxxx>
• Re: dm: add swap_slot_free_notify handler
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH] dm crypt: fix crash on exit
  • From: Rabin Vincent <rabin.vincent@xxxxxxxx>
• Re: dm crypt: fix crash on exit
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• dm-mpath: Handling SCSI-3 PR RELEASE in multi-controller environment
  • From: jiangyiwen <jiangyiwen@xxxxxxxxxx>
• [PATCH] dm flakey: add DAX support
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH] mpathpersist: memset length is wrong
  • From: tang.junhui@xxxxxxxxxx
• Re: [PATCH] dm flakey: add DAX support
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: dm-verity verification
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: dm-verity verification
  • From: "$rik@nth " <srikanth007m@xxxxxxxxx>
• Re: [PATCH -next] dm cache policy smq: remove duplicated include from dm-cache-policy-smq.c
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: dm-verity verification
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• dm-verity verification
  • From: "$rik@nth " <srikanth007m@xxxxxxxxx>
• [PATCH -next] dm cache policy smq: remove duplicated include from dm-cache-policy-smq.c
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH] multipath-tools: add Dell EMC Unity documentation
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• [PATCH] multipath-tools: merge emc and dell
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: [PATCH v2 2/6] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH v2 6/6] dm mpath: delay the requeue of blk-mq requests while all paths down
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 5/6] dm mpath: use dm_mq_kick_requeue_list()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 4/6] dm rq: introduce dm_mq_kick_requeue_list()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 3/6] dm rq: reduce arguments passed to map_request() and dm_requeue_original_request()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 2/6] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 1/6] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 1/6] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH v3 1/6] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: Can we please make 'allow_discards' the default for dm-crypt?
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH v2 1/6] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH v2 5/6] dm mpath: use dm_mq_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH v2 2/6] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH v2 6/6] dm mpath: delay the requeue of blk-mq requests while all paths down
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH v2 4/6] dm rq: introduce dm_mq_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH v2 3/6] dm rq: reduce arguments passed to map_request() and dm_requeue_original_request()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH for-4.9 v2 0/6] [PATCH for-4.9 v2 0/3] allow delayed requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH v2 1/6] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: Can we please make 'allow_discards' the default for dm-crypt?
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: Can we please make 'allow_discards' the default for dm-crypt?
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 0/3] block: Improve bio_set_op_attrs() robustness
  • From: Jens Axboe <axboe@xxxxxx>
• Re: [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
• Re: [PATCH 2/3] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: should blk-mq halt requeue processing while queue is frozen?
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
• Re: [PATCH 2/3] block, dm-crypt, btrfs: Introduce bio_flags()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 3/3] block: Improve bio_set_op_attrs() robustness
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 2/3] block, dm-crypt, btrfs: Introduce bio_flags()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/3] block: Document that bio_op() uses the data type of bio.bi_opf
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 3/3] block: Improve bio_set_op_attrs() robustness
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH 2/3] block, dm-crypt, btrfs: Introduce bio_flags()
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH 1/3] block: Document that bio_op() uses the data type of bio.bi_opf
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• [PATCH 1/3] block: Document that bio_op() uses the data type of bio.bi_opf
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 3/3] block: Improve bio_set_op_attrs() robustness
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 2/3] block, dm-crypt, btrfs: Introduce bio_flags()
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• [PATCH 0/3] block: Improve bio_set_op_attrs() robustness
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: Can we please make 'allow_discards' the default for dm-crypt?
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH 3/3] dm mpath: delay the requeue of blk-mq requests while all paths down
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/3] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Can we please make 'allow_discards' the default for dm-crypt?
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] blk-mq: introduce blk_mq_delay_kick_requeue_list()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH 3/3] dm mpath: delay the requeue of blk-mq requests while all paths down
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH for-4.9 0/3] allow delayed requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH 2/3] dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: should blk-mq halt requeue processing while queue is frozen?
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• [PATCH] multipathd: uxsock_timeout should be assigned by conf->uxsock_timeout
  • From: tang.junhui@xxxxxxxxxx
• [RFC][PATCH] dm: Remove dm_bufio_cond_resched()
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [PATCH] multipathd.service: ignore modprobe failures
  • From: Mike Gilbert <floppym@xxxxxxxxxx>
• Re: [PATCH] Re: your dm patch for strace
  • From: "Dmitry V. Levin" <ldv@xxxxxxxxxxxx>
• Re: dm: Return correct value in retry loop
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH] kpartx: partitions of mapped devices cannot be created in redhat OS
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] dm: Return correct value in retry loop
  • From: Minfei Huang <mnghuan@xxxxxxxxx>
• Re: [PATCH] kpartx: partitions of mapped devices cannot be created in redhat OS
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• Re: [PATCH] kpartx: partitions of mapped devices cannot be created in redhat OS
  • From: zhang.kai16@xxxxxxxxxx
• [PATCH] dm verity: fix incorrect error message
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH] kpartx: partitions of mapped devices cannot be created in redhat OS
  • From: "Benjamin Marzinski" <bmarzins@xxxxxxxxxx>
• payload not set (bi_sector=0) in clone_endio
  • From: Akira Hayakawa <ruby.wktk@xxxxxxxxx>
• Re: should blk-mq halt requeue processing while queue is frozen?
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: lvmetad doesn't terminate with SIGTERM if thin volume used
  • From: james harvey <jamespharvey20@xxxxxxxxx>
• Re: [PATCH] kpartx: partitions of mapped devices cannot be created in redhat OS
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• [PATCH] dm: Return correct value in retry loop
  • From: Minfei Huang <mnghuan@xxxxxxxxx>
• Re: Possible data corruption with dm-thin
  • From: Dennis Yang <dennisyang@xxxxxxxx>
• Re: [PATCH] multipath-tools: request to update man pages/TEMPLATE if "device subsection" keywords are changed
  • From: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
• Re: lvmetad doesn't terminate with SIGTERM if thin volume used
  • From: Zdenek Kabelac <zkabelac@xxxxxxxxxx>
• Re: dm-crypt: flush crypt_queue on suspend? on REQ_FLUSH?
  • From: Eric Wheeler <dm-devel@xxxxxxxxxxxxxxxxxx>
• Re: lvmetad doesn't terminate with SIGTERM if thin volume used
  • From: james harvey <jamespharvey20@xxxxxxxxx>
• Re: should blk-mq halt requeue processing while queue is frozen?
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: should blk-mq halt requeue processing while queue is frozen?
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• dm-crypt: flush crypt_queue on suspend? on REQ_FLUSH?
  • From: Eric Wheeler <dm-devel@xxxxxxxxxxxxxxxxxx>
• [git pull] device mapper fixes for 4.8-rc5
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• should blk-mq halt requeue processing while queue is frozen? [was: Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues]
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
• Re: [PATCH 8/9] dm: Fix two race conditions related to stopping and starting queues
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>