On Sun, Oct 02, 2016 at 02:10:50AM -0300, Andre Caldas wrote: > As I understood it, when I call > $ kpartx -a disk.img > kpartx chooses a "device name" X, detects the partitions and their > numbers N, and creates device nodes with naming > XpN. This command performs several steps for you. You can have greater control by issuing those steps yourself: 1. Create a loop device mapping the image (/dev/loopN) 2. Create a device-mapper device with a linear map of the loop: # dmsetup create $DEV_NAME --table="0 $DEV_SIZE linear /dev/loopN" This allows you to give any DEV_NAME you like to the device (with the default kpartx behaviour, the partitions just map the loop device, so have names like 'loop0p1' etc.). 3. Map partitions on the new dm device with kpartx: # kpartx -a /dev/mapper/$DEV_NAME See the kpartx man page for options to fine-tune the partition device names. The dmsetup command has lots of options to control the output format that can be used to get readily parseable data. Regards, Bryn. -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
