Merged.
On Mon, Oct 17, 2016 at 11:29 PM, Xose Vazquez Perez <xose.vazquez@xxxxxxxxx> wrote:
to be consistent with the rest of the text.
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com >
Cc: device-mapper development <dm-devel@xxxxxxxxxx>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
---
multipath/multipath.conf.5 | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 4ab2917..eec319f 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -7,7 +7,7 @@
.\"
.\" ------------------------------------------------------------ ----------------
.
-.TH MULTIPATH.CONF 5 2016-08-12 "Linux"
+.TH MULTIPATH.CONF 5 2016-10-18 "Linux"
.
.
.\" ------------------------------------------------------------ ----------------
@@ -162,19 +162,19 @@ kernel multipath target. There are three selector algorithms:
.RS
.TP 12
.I "round-robin 0"
-Loop through every path in the path group, sending the same amount of IO to
+Loop through every path in the path group, sending the same amount of I/O to
each. Some aspects of behavior can be controlled with the attributes:
\fIrr_min_io\fR, \fIrr_min_io_rq\fR and \fIrr_weight\fR.
.TP
.\" XXX
.I "queue-length 0"
-(Since ??? kernel) Choose the path for the next bunch of IO based on the amount
-of outstanding IO to the path.
+(Since ??? kernel) Choose the path for the next bunch of I/O based on the amount
+of outstanding I/O to the path.
.TP
.\" XXX
.I "service-time 0"
-(Since ??? kernel) Choose the path for the next bunch of IO based on the amount
-of outstanding IO to the path and its relative throughput.
+(Since ??? kernel) Choose the path for the next bunch of I/O based on the amount
+of outstanding I/O to the path and its relative throughput.
.TP
Default value is: \fBservice-time 0\fR
.RE
@@ -342,7 +342,7 @@ Possible values for the feature list are:
.TP 12
.\" XXX
.I queue_if_no_path
-(Superseded by \fIno_path_retry\fR) (Since ??? kernel) Queue IO if no path is active.
+(Superseded by \fIno_path_retry\fR) (Since ??? kernel) Queue I/O if no path is active.
Identical to the \fIno_path_retry\fR with \fIqueue\fR value. See KNOWN ISSUES.
.TP
.I no_partitions
@@ -448,7 +448,7 @@ Default value is: \fBmanual\fR
.
.TP
.B rr_min_io
-Number of IO requests to route to a path before switching to the next in the
+Number of I/O requests to route to a path before switching to the next in the
same path group. This is only for \fIBlock I/O\fR(BIO) based multipath and
only apply to \fIround-robin\fR path_selector.
.RS
@@ -459,7 +459,7 @@ Default value is: \fB1000\fR
.
.TP
.B rr_min_io_rq
-Number of IO requests to route to a path before switching to the next in the
+Number of I/O requests to route to a path before switching to the next in the
same path group. This is only for \fIRequest\fR based multipath and
only apply to \fIround-robin\fR path_selector.
.RS
@@ -523,9 +523,9 @@ If set to
, when multipathd stops, queueing will be turned off for all devices.
This is useful for devices that set no_path_retry. If a machine is
shut down while all paths to a device are down, it is possible to hang waiting
-for IO to return from the device after multipathd has been stopped. Without
+for I/O to return from the device after multipathd has been stopped. Without
multipathd running, access to the paths cannot be restored, and the kernel
-cannot be told to stop queueing IO. Setting queue_without_daemon to
+cannot be told to stop queueing I/O. Setting queue_without_daemon to
.I no
, avoids this problem.
.RS
@@ -574,7 +574,7 @@ Default value is: \fBno\fR
.TP
.B fast_io_fail_tmo
Specify the number of seconds the SCSI layer will wait after a problem has been
-detected on a FC remote port before failing IO to devices on that remote port.
+detected on a FC remote port before failing I/O to devices on that remote port.
This should be smaller than dev_loss_tmo. Setting this to
.I off
will disable the timeout.
--
2.10.1
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
