Pulseaudio Discussion - Date Index

• Thread Index

• Timing interval for Bluetooth Wideband speech
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] bluez5-device, bluez5-discover: add hsp_source_buffer_msec argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device, bluez5-discover: add hsp_source_buffer_msec argument
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Updating the WebRTC AudioProcessing library
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluez5-device: Fix memory leak in sco_process_render()
  • From: georg@xxxxxxxx (Georg Chini)
• PulseAudio autospawn fails on macOS 10.13 (High Sierra)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluez5-device: Fix memory leak in sco_process_render()
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] bluez5-device: Fix memory leak in sco_process_render()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device: Fix memory leak in sco_process_render()
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH 3/3] core: prefer available devices during default source/sink selection
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/3] device-port: Add messages to enable/disable jack detection
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] card: add infrastructure to enable/disable jack detection
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/3] card: Add messages to control jack detection
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 3/3] message-handler: Send signal on handler events
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/3] pactl: Add signal receiver
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] protocol-native: Add signal receiving capability
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/3] core: Add signal sending/receiving
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 8/8] message-params: Add read functions for arrays
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 7/8] message-params: Add read/write functions for various simple data types
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 6/8] message-params: Allow parameter strings to contain escaped curly braces
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/8] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 4/8] core: add message handler
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 3/8] pactl, pacmd, cli-command: Add send-message command
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/8] protocol-native: add message sending capability
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/8] core: add simple message interface
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/8] core: Add message sending/receiving
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 10/10] loopback: Add log_interval and log_interval_msec parameter
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 09/10] loopback: Add adjust_time_msec parameter to allow adjust times below 1s
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 08/10] loopback: Add low_device_latency parameter
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 07/10] loopback: Only use controller weight after target latency has been crossed twice
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 06/10] loopback: Add adjust_threshold_usec parameter
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 05/10] loopback: Track prediction error; debug and cosmetic changes
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 04/10] loopback: Add latency prediction and Kalman filter
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 03/10] loopback: Optimize adaptive re-sampling
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 02/10] loopback: Limit controller step size to 2.01‰
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 01/10] loopback: Do not detect underruns during initial latency adjustments
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 00/10] loopback: Optimize latency stabilization
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 10/10] solaris: Allow module-solaris to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 09/10] raop-sink: Allow module-raop-sink to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 08/10] esound-sink: Allow module-esound-sink to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 07/10] tunnel: Allow module-tunnel to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 06/10] combine-sink: Allow module-combine-sink to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 05/10] stream: Allow stream.c to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 04/10] bluetooth: Allow bluetooth to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 03/10] alsa sink/source: Allow alsa to use alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 02/10] Add configure option --enable-smoother-2 to enable alternative smoother code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 01/10] pulsecore: Add alternative time smoother implementation
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 00/10] pulsecore: Add new time smoother
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 6/6] tunnel: Make fixed latency configurable
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/6] tunnel: Fix latency calculations
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 4/6] combine-sink: Use configured resampler, reduce update time to 1s
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 3/6] combine-sink: Improve initial latency reports
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/6] combine-sink: Add rate controller
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/6] combine-sink: Fix latency calculations
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/6] combine-sink, tunnel-sink: Latency fixes
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device, bluez5-discover: add hsp_source_buffer_msec argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device: Fix memory leak in sco_process_render()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] null-source: fix multiple bugs
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] man: unify pactl and pacmd suspend command documentation
  • From: georg@xxxxxxxx (Georg Chini)
• Updating the WebRTC AudioProcessing library
  • From: tomaz.solc@xxxxxxxxxx (Tomaž Šolc)
• [PATCH v10 2/3] pipe-source: respect frame boundaries
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v10 1/3] pipe-source: implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• Starting pulseaudio on embedded as root
  • From: tomaz.solc@xxxxxxxxxx (Tomaž Šolc)
• Bluetooth SCO Sink and Source. module-bluetooth-discover
  • From: Vimal.Babu@xxxxxxxxxxxxx (Vimal Babu)
• [PATCH] man: unify pactl and pacmd suspend command documentation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• get Pulseaudio to work on headless Linux server w/o root access?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• bluetooth headset connection and disconnection status
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PulseAudio autospawn fails on macOS 10.13 (High Sierra)
  • From: rjvbertin@xxxxxxxxx (René J.V. Bertin)
• PulseAudio autospawn fails on macOS 10.13 (High Sierra)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Timing interval for Bluetooth Wideband speech
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• bluetooth headset connection and disconnection status
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• Timing interval for Bluetooth Wideband speech
  • From: ajay.kv8@xxxxxxxxx (Ajay Kv)
• Headset support
  • From: dwmw2@xxxxxxxxxxxxx (David Woodhouse)
• Timing interval for Bluetooth Wideband speech
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Headset support
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Headset support
  • From: dwmw2@xxxxxxxxxxxxx (David Woodhouse)
• Headset support
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Headset support
  • From: dwmw2@xxxxxxxxxxxxx (David Woodhouse)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• get Pulseaudio to work on headless Linux server w/o root access?
  • From: bsferrazza@xxxxxxxxxx (Ben Sferrazza)
• bluetooth headset connection and disconnection status
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: elementary.enigma@xxxxxxxxx (Brandon Carpenter)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] alsa-util: Set ALSA report_delay flag in pa_alsa_safe_delay()
  • From: georg@xxxxxxxx (Georg Chini)
• Timing interval for Bluetooth Wideband speech
  • From: nsathish41@xxxxxxxxx (Sathish Narasimman)
• Starting pulseaudio on embedded as root
  • From: sherifomran2000@xxxxxxxxx (Sherif Omran)
• Updating the WebRTC AudioProcessing library
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Timing interval for Bluetooth Wideband speech
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v4 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Timing interval for Bluetooth Wideband speech
  • From: nsathish41@xxxxxxxxx (Sathish Narasimman)
• [PATCH v4 3/4] bluetooth: policy: Remove BlueZ 4 related code
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4 2/4] bluetooth: Remove BlueZ 4 support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v4 3/4] bluetooth: policy: Remove BlueZ 4 related code
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v4 2/4] bluetooth: Remove BlueZ 4 support
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v4 1/4] bluetooth: ofono: Use Acquire method if available
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Updating the WebRTC AudioProcessing library
  • From: tomaz.solc@xxxxxxxxxx (Tomaž Šolc)
• What could cause "Assertion '!e->next' failed at pulsecore/queue.c:104, function pa_queue_pop(). Aborting." ?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sound cracking and distorted...
  • From: mr.jarry@xxxxxxxxx (Jarry)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• What could cause "Assertion '!e->next' failed at pulsecore/queue.c:104, function pa_queue_pop(). Aborting." ?
  • From: wellingtonwallace@xxxxxxxxx (wellington wallace)
• What could cause "Assertion '!e->next' failed at pulsecore/queue.c:104, function pa_queue_pop(). Aborting." ?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/4] bluetooth: Remove BlueZ 4 support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] UI form enhancement
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sound cracking and distorted...
  • From: rtreleaven@xxxxxxxxxxxx (Russell Treleaven)
• Sound cracking and distorted...
  • From: mr.jarry@xxxxxxxxx (Jarry)
• [PATCH] UI form enhancement (question)
  • From: cook60020tmp@xxxxxxx (Nikita Zlobin)
• [PATCH] UI form enhancement (question)
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] UI form enhancement (question)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] UI form enhancement (question)
  • From: cook60020tmp@xxxxxxx (Nikita Zlobin)
• What could cause "Assertion '!e->next' failed at pulsecore/queue.c:104, function pa_queue_pop(). Aborting." ?
  • From: wellingtonwallace@xxxxxxxxx (wellington wallace)
• [PATCH] UI form enhancement (description)
  • From: cook60020tmp@xxxxxxx (Nikita Zlobin)
• [PATCH] UI form enhancement
  • From: cook60020tmp@xxxxxxx (Nikita Zlobin)
• [PATCH v3] Fix memory leaks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3] Fix memory leaks
  • From: jungsup4.lee@xxxxxxxxxxx (Jungsup Lee)
• [PATCH v3 1/4] bluetooth: ofono: Use Acquire method if available
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth HSP handling on pulseaudio
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v3 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v3 3/4] bluetooth: policy: Remove BlueZ 4 related code
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v3 2/4] bluetooth: Remove BlueZ 4 support
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v3 1/4] bluetooth: ofono: Use Acquire method if available
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Bluetooth HSP handling on pulseaudio
  • From: dwmw2@xxxxxxxxxxxxx (David Woodhouse)
• Bluetooth HSP handling on pulseaudio
  • From: georg@xxxxxxxx (Georg Chini)
• Bluetooth HSP handling on pulseaudio
  • From: dwmw2@xxxxxxxxxxxxx (David Woodhouse)
• [PATCH] optimize set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• impossible configuration
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• impossible configuration
  • From: francois.patte@xxxxxxxxxxxxxxxxxxxx (François Patte)
• [PATCH] optimize set_state_in_io_thread() callbacks
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v10 3/3] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v10 2/3] pipe-source: respect frame boundaries
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v10 1/3] pipe-source: implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v2 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v3 0/2] State change refactoring, port change crash fix
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v3 2/2] fix a call to pa_sink_suspend() from an incorrect thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/2] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 0/2] State change refactoring, port change crash fix
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Fix memory leaks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/4] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2 3/4] bluetooth: policy: Remove BlueZ 4 related code
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2 2/4] bluetooth: Remove BlueZ 4 support
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2 1/4] bluetooth: ofono: Use Acquire method if available
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] Added loopback module option
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• Timing interval for Bluetooth Wideband speech
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth: ofono: Use Acquire method if available
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] bluetooth: Remove BlueZ 4 support
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/3] bluetooth: ofono: Use Acquire method if available
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2 5/5] fix a call to pa_sink_suspend() from an incorrect thread
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] Fix memory leaks
  • From: jungsup4.lee@xxxxxxxxx (Jungsup Lee)
• [PATCH] Fix memory leaks
  • From: jungsup4.lee@xxxxxxxxxxx (Jungsup Lee)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 3/5] replace sink/source SET_STATE handlers with callbacks
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/5] oss: don't fail resume if trigger() fails
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 1/5] sink, source: rename set_state() to set_state_in_main_thread()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/3] bluetooth: Remove BlueZ 4 support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth: ofono: Use Acquire method if available
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Timing interval for Bluetooth Wideband speech
  • From: nsathish41@xxxxxxxxx (Sathish Narasimman)
• [PATCH] Fix memory leaks
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2 3/5] replace sink/source SET_STATE handlers with callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Fix memory leaks
  • From: jungsup4.lee@xxxxxxxxxxx (Jungsup Lee)
• [PATCH v2 3/5] replace sink/source SET_STATE handlers with callbacks
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v2 5/5] fix a call to pa_sink_suspend() from an incorrect thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/5] pass pa_suspend_cause_t to set_state_in_io_thread() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/5] replace sink/source SET_STATE handlers with callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/5] oss: don't fail resume if trigger() fails
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/5] sink, source: rename set_state() to set_state_in_main_thread()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/5] State change refactoring, port change crash fix
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• State of the WebRTC AudioProcessing library?
  • From: tomaz.solc@xxxxxxxxxx (Tomaž Šolc)
• State of the WebRTC AudioProcessing library?
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• State of the WebRTC AudioProcessing library?
  • From: tomaz.solc@xxxxxxxxxx (Tomaž Šolc)
• [RFC 0/2] PulseAudio modules documentaiton updated
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pactl command to switch sound from speakers to headphone
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Unwanted microphone volume reset on Arch
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pactl command to switch sound from speakers to headphone
  • From: wolf_volpi@xxxxxxxxx (Wolfram Volpi)
• [PATCH 3/3] bluetooth: Rename *bluez5 modules to bluetooth
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 2/3] bluetooth: Remove BlueZ 4 support
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/3] bluetooth: ofono: Use Acquire method if available
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Unwanted microphone volume reset on Arch
  • From: kai.hendry@xxxxxxxxx (Kai Hendry)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: elementary.enigma@xxxxxxxxx (Brandon Carpenter)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: elementary.enigma@xxxxxxxxx (Brandon Carpenter)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: elementary.enigma@xxxxxxxxx (Brandon Carpenter)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Non-working microphone on Logtech HD Pro Webcam C920
  • From: elementary.enigma@xxxxxxxxx (Brandon Carpenter)
• [RFC 2/2] pulseaudio modules - adding documentation for two more modules
  • From: nandor.han@xxxxxx (Nandor Han)
• [RFC 1/2] pulseaudio modules - documentation cosmetic change
  • From: nandor.han@xxxxxx (Nandor Han)
• [RFC 0/2] PulseAudio modules documentaiton updated
  • From: nandor.han@xxxxxx (Nandor Han)
• [PATCH v2] set exit_idle_time to 0 when we detect a session
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] set exit_idle_time to 0 when we detect a session
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: rdieter@xxxxxxxxxxxx (Rex Dieter)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] set exit-idle-time to 0 when we detect a session
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] bluez5-device: Rewrite of thread function, reduce send buffer size for a2dp sink
  • From: georg@xxxxxxxx (Georg Chini)
• Remaining PA process after X logout
  • From: rdieter@xxxxxxxxxxxx (Rex Dieter)
• Remaining PA process after X logout
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Remaining PA process after X logout
  • From: rdieter@xxxxxxxxxxxx (Rex Dieter)
• Remaining PA process after X logout
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] set exit-idle-time to 0 when we detect a session
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v2] pipe-sink: auto-drain the pipe on sink resume
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] set exit-idle-time to 0 when we detect a session
  • From: rdieter@xxxxxxxxxxxx (Rex Dieter)
• Pulseaudio Cross-compilation issue
  • From: hamdi.rejeb3@xxxxxxxxx (Hamdi Rejeb)
• [PATCH] set exit-idle-time to 0 when we detect a session
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH] set exit-idle-time to 0 when we detect a session
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Remaining PA process after X logout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Remaining PA process after X logout
  • From: rdieter@xxxxxxxxxxxx (Rex Dieter)
• [PATCH] pipe-sink: auto-drain the pipe on sink resume
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• Remaining PA process after X logout
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio qt webengine NO AUDIO
  • From: Vimal.Babu@xxxxxxxxxxxxx (Vimal Babu)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v9] pipe-source: [DRAFT] implement autosuspend behavior
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] sink: don't sync monitor suspend state when unlinking
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 6/8] pass pa_suspend_cause_t to SINK/SOURCE_SET_STATE handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] sink: don't sync monitor suspend state when unlinking
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/8] pass pa_suspend_cause_t to SINK/SOURCE_SET_STATE handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 7/8] bluetooth: fix resume error handling
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 6/8] pass pa_suspend_cause_t to SINK/SOURCE_SET_STATE handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/8] pass pa_suspend_cause_t to set_state() callbacks
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 4/8] sink, source: redo state changing code
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shuishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• Per (sink input, sink) volume control / routing
  • From: ahartmetz@xxxxxxxxx (Andreas Hartmetz)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] Add support for SteelSeries Arctis 5 and renamed Arctis 7 files appropriately
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/8] pass pa_suspend_cause_t to SINK/SOURCE_SET_STATE handlers
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v4 2/7] protocol-native: add message sending capability
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• Per (sink input, sink) volume control / routing
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] null-sink, pipe-sink: some state variable cleanups
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] null-sink, pipe-sink: some state variable cleanups
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH 3/8] alsa: add a couple of FIXME comments
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/8] alsa, solaris, oss: remove unnecessary error handling when suspending
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v2] alsa-card: improve the profile availability logic
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] loopback: use source sample spec and channel map by default
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] loopback: max_latency_msec argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v8] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 1/7] core: add simple message interface
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• YouTube (Firefox) changing sliders
  • From: mail@xxxxxxxxxxxxxxxxx (Norbert de Jonge)
• [PATCH v2] alsa-card: improve the profile availability logic
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Added loopback module option
  • From: archlinux@xxxxxxxxxxx (archlinux@xxxxxxxxxxx)
• [PATCH] loopback: use source sample spec and channel map by default
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• loopback module double resampling
  • From: georg@xxxxxxxx (Georg Chini)
• Per (sink input, sink) volume control / routing
  • From: ahartmetz@xxxxxxxxx (Andreas Hartmetz)
• Per (sink input, sink) volume control / routing
  • From: georg@xxxxxxxx (Georg Chini)
• Per (sink input, sink) volume control / routing
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• loopback module double resampling
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• Per (sink input, sink) volume control / routing
  • From: ahartmetz@xxxxxxxxx (Andreas Hartmetz)
• [PATCH v2] loopback: max_latency_msec argument
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v7] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH 8/8] fix a call to pa_sink_suspend() from an incorrect thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 7/8] bluetooth: fix resume error handling
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/8] pass pa_suspend_cause_t to SINK/SOURCE_SET_STATE handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/8] pass pa_suspend_cause_t to set_state() callbacks
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/8] sink, source: redo state changing code
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/8] alsa: add a couple of FIXME comments
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/8] null-sink, pipe-sink: prefer thread_info variables in the IO thread
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/8] alsa, solaris, oss: remove unnecessary error handling when suspending
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/8] Sink/source state change fixes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC] prevent-dpms-off: Add module to signal DPMS should not happen
  • From: benjamin@xxxxxxxxxxxxxxxx (Benjamin Berg)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: max_latency_msec argument
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• [PATCH] null-source: fix multiple bugs
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] null-source: fix multiple bugs
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shuishniou)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] null-source: fix multiple bugs
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shuishniou)
• [PATCH] null-source: fix multiple bugs
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] null-source: fix multiple bugs
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] null-source: fix multiple bugs
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• Sample format spec with Linear 16bit 16kHz
  • From: georg@xxxxxxxx (Georg Chini)
• Sample format spec with Linear 16bit 16kHz
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] null-source: fix multiple bugs
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: max_latency_msec argument
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH] loopback: underrun_protection argument
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] null-source: correct latency report and silence memory
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: underrun_protection argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: underrun_protection argument
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] null-source: correct latency report and silence memory
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] null-source: correct latency report and silence memory
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: underrun_protection argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 2/2] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v6 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH] null-source: correct latency report and silence memory
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] loopback: underrun_protection argument
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH] null-source: correct latency report and silence memory
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: underrun_protection argument
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] loopback: underrun_protection argument
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v5 2/2] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v5 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v4 2/2] pipe-source: implement autosuspend option
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v4 1/2] pipe-source: generate silence when no writers connected
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v3] pipe-source: optional suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• Sample format spec with Linear 16bit 16kHz
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• [PATCH v2 2/3] alsa-mixer: autodetect the HDMI jack PCM device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Add support for SteelSeries Arctis 5 and renamed Arctis 7 files appropriately
  • From: demontpx@xxxxxxxxx (Bert Hekman)
• Odd app behavior with PULSE_PROP="filter.want=echo-cancel"
  • From: rocketraman@xxxxxxxxx (Raman Gupta)
• Odd app behavior with PULSE_PROP="filter.want=echo-cancel"
  • From: rocketraman@xxxxxxxxx (Raman Gupta)
• [PATCH] Add support for SteelSeries Arctis 5 and renamed Arctis 7 files appropriately
  • From: demontpx@xxxxxxxxx (Bert Hekman)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v3] pipe-source: optional suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• Odd app behavior with PULSE_PROP="filter.want=echo-cancel"
  • From: rtreleaven@xxxxxxxxxxxx (Russell Treleaven)
• Odd app behavior with PULSE_PROP="filter.want=echo-cancel"
  • From: georg@xxxxxxxx (Georg Chini)
• [orca-list] update on the antergos problems (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [orca-list] update on the antergos problems (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [orca-list] update on the antergos problems (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/3] alsa-mixer: autodetect the HDMI jack PCM device
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Odd app behavior with PULSE_PROP="filter.want=echo-cancel"
  • From: rocketraman@xxxxxxxxx (Raman Gupta)
• Fwd: Adding support for CMEDIA USB2.0 High-Speed True HD Audio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Freezing master
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] core-util: correct error in set_nonblock()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] core-util: correct error in set_nonblock()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v3] pipe-source: optional suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shishniou)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shuishniou)
• Sample format spec with Linear 16bit 16kHz
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 7/7] message-params: Add read/write functions for various simple data types
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: georg@xxxxxxxx (Georg Chini)
• Sample format spec with Linear 16bit 16kHz
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sample format spec with Linear 16bit 16kHz
  • From: georg@xxxxxxxx (Georg Chini)
• Sample format spec with Linear 16bit 16kHz
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• pulseaudio-discuss Digest, Vol 82, Issue 7
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-source: suspend source when no writers connected to fifo
  • From: rommer@xxxxxxxxxxx (Raman Shyshniou)
• Sample format spec with Linear 16bit 16kHz
  • From: georg@xxxxxxxx (Georg Chini)
• Sample format spec with Linear 16bit 16kHz
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] filter-apply: Ignore monitor source of filter in find_paired_master()
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] alsa-mixer: add support for Steelseries Arctis 5 headset
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v5 8/7] message-params: Add read functions for arrays
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v5 7/7] message-params: Add read/write functions for various simple data types
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v5 6/7] message-params: Allow parameter strings to contain escaped curly braces
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v5 5/7] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• Module "module-bluetooth-discover" cannot be loaded.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Module "module-bluetooth-discover" cannot be loaded.
  • From: vic.puertas@xxxxxxxxxxx (victor puertas)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: h1p8r10n@xxxxxxxxx (Jean-Philippe Guillemin)
• [PATCH] alsa-mixer: add support for Steelseries Arctis 5 headset
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: h1p8r10n@xxxxxxxxx (Jean-Philippe Guillemin)
• Pulseaudio moulde echo-cancellation: Initialization failed
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• [PATCH v5 7/7] message-params: Add read/write functions for various simple data types
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• [PATCH] alsa-mixer: add support for Steelseries Arctis 5 headset
  • From: demontpx@xxxxxxxxx (Bert Hekman)
• Toslink capture looback latency problem
  • From: georg@xxxxxxxx (Georg Chini)
• Toslink capture looback latency problem
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: h1p8r10n@xxxxxxxxx (Jean-Philippe Guillemin)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: h1p8r10n@xxxxxxxxx (Jean-Philippe Guillemin)
• Pulseaudio moulde echo-cancellation: Initialization failed
  • From: Vimal.Babu@xxxxxxxxxxxxx (Vimal Babu)
• [PATCH] alsa-mixer: add support for Steelseries Arctis 5 headset
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 7/7] message-params: Add read/write functions for various simple data types
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 6/7] message-params: Allow parameter strings to contain escaped curly braces
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 5/7] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 4/7] core: add message handler
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 3/7] pactl, pacmd, cli-command: Add send-message command
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 2/7] protocol-native: add message sending capability
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v4 1/7] core: add simple message interface
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/7 v4] Implement simple message API
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• profile-set for CMEDIA USB2.0 High-Speed True HD Audio (147a:e055)
  • From: h1p8r10n@xxxxxxxxx (Jean-Philippe Guillemin)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] build-sys: don't install esdcompat tool if building without esound support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v3 6/6] message-handler: Allow parameter strings to contain escaped curly braces
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v3 5/6] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 5/6] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 6/6] message-handler: Allow parameter strings to contain escaped curly braces
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 5/6] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 4/6] core: add message handler
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 3/6] pactl, pacmd, cli-command: Add send-message command
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/6] protocol-native: add message sending capability
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 1/6] core: add simple message interface
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 0/6] Implement simple message interface
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: don't send unsolicted replies to the endpoint Release() call
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: don't send unsolicted replies to the endpoint Release() call
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/5] pactl, pacmd, cli-command: Add send-message command
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-sink using existing fifo
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 3/5] pactl, pacmd, cli-command: Add send-message command
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [alsa-devel] Silencing plops / click sounds on start / stop of playing audio when snd_hda_intel.power_save=1
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [PATCH] build-sys: don't install esdcompat tool if building without esound support
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/5] core: add message handler
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 4/5] core: add message handler
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 4/5] core: add message handler
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] pactl: Implement list message-handlers
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/5] core: add message handler
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• using PulseAudio without D-Bus?
  • From: cgorac@xxxxxxxxx (Crni Gorac)
• [PATCH 4/5] core: add message handler
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] pipe-sink using existing fifo
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH 4/5] core: add message handler
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• using PulseAudio without D-Bus?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-sink: new option "use_existing_fifo"
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] pipe-sink: new option "use_existing_fifo"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] pipe-sink: new option "use_existing_fifo"
  • From: georg@xxxxxxxx (Georg Chini)
• using PulseAudio without D-Bus?
  • From: cgorac@xxxxxxxxx (Crni Gorac)
• [PATCH] pipe-sink: new option "use_existing_fifo"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH 3/5] pactl, pacmd, cli-command: Add send-message command
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• using PulseAudio without D-Bus?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• modules/echo-cancel/libwebrtc
  • From: p.gunnarsson@xxxxxxxxx (Per Gunnarsson)
• using PulseAudio without D-Bus?
  • From: cgorac@xxxxxxxxx (Crni Gorac)
• webrtc compile problem
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• webrtc compile problem
  • From: p.gunnarsson@xxxxxxxxx (Per Gunnarsson)
• webrtc compile problem
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• webrtc compile problem
  • From: p.gunnarsson@xxxxxxxxx (Per Gunnarsson)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• running pulseaudio on an embedded device with no X as a network sink
  • From: doron.behar@xxxxxxxxx (Doron Behar)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Orca, Speech-dispatcher and power management (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• pulseaudio and espeakup (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• pulseaudio and espeakup (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] alsa-mixer: add support for Steelseries Arctis 5 headset
  • From: demontpx@xxxxxxxxx (Bert Hekman)
• Network problem
  • From: p.gunnarsson@xxxxxxxxx (Per Gunnarsson)
• pa_simple_write() hangs after underruns
  • From: victor@xxxxxxxxx (Victor)
• pulseaudio system accessibility notes
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Couldn't set Buffer size for Bluetooth Audio
  • From: suzukisn@xxxxxxxxx (Shinnosuke Suzuki)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• pulseaudio and espeakup (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• pulseaudio and espeakup (fwd)
  • From: georg@xxxxxxxx (Georg Chini)
• pulseaudio and espeakup (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• running pulseaudio on an embedded device with no X as a network sink
  • From: georg@xxxxxxxx (Georg Chini)
• running pulseaudio on an embedded device with no X as a network sink
  • From: doron.behar@xxxxxxxxx (Doron Behar)
• Audio source getting stuck on monitor record
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 1/2] switch-on-port-available: remove unused return values
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] build-sys: fix PA_MODULE_NAME for module-default-device-restore
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 0/3] Fix infinite loop with Intel HDMI LPE driver (plus logging improvements)
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: diwic@xxxxxxxxxx (David Henningsson)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: diwic@xxxxxxxxxx (David Henningsson)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 2/5] protocol-native: add message sending capability
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH v2 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/2] switch-on-port-available: remove unused return values
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/2] Improve routing when all ports of a card become unavailable
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/2] switch-on-port-available: deactivate direction when the no ports are available for that direction
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] switch-on-port-available: remove unused return values
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Improve routing when all ports of a card become unavailable
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] build-sys: fix PA_MODULE_NAME for module-default-device-restore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio crash when unplugging hdmi while playing audio over hdmi on Cherry Trail devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/3] sink, source: improve suspend cause logging
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] sink, source: improve state change logging
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] alsa: fix infinite loop with Intel HDMI LPE
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Fix infinite loop with Intel HDMI LPE driver (plus logging improvements)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• running pulseaudio on an embedded device with no X as a network sink
  • From: doron.behar@xxxxxxxxx (Doron Behar)
• Audio source getting stuck on monitor record
  • From: daniele.varrazzo@xxxxxxxxx (Daniele Varrazzo)
• [PATCH] Port from GTK2 to GTK3
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Atmos
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• Atmos
  • From: david.cary.hart@xxxxxxxxx (David Cary Hart)
• Line-in plug not detected at boot
  • From: kritek@xxxxxxxxx (Rick Dicaire)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [alsa-devel] Silencing plops / click sounds on start / stop of playing audio when snd_hda_intel.power_save=1
  • From: perex@xxxxxxxx (Jaroslav Kysela)
• Silencing plops / click sounds on start / stop of playing audio when snd_hda_intel.power_save=1
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• pulseaudio crash when unplugging hdmi while playing audio over hdmi on Cherry Trail devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• System mode and SHM-memfd
  • From: darwish.07@xxxxxxxxx (Ahmed S. Darwish)
• BT WBS implementation requirement
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• BT WBS implementation requirement
  • From: nsathish41@xxxxxxxxx (Sathish Narasimman)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• pulseaudio crash when unplugging hdmi while playing audio over hdmi on Cherry Trail devices
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [PATCH] build-sys: Stop using symdef headers for modules
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Stuttering when sending vbr stream via tunnel sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] build-sys: Stop using symdef headers for modules
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] map-file: add pa_encoding_from_string
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] map-file: add pa_encoding_from_string
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [alsa-devel] Per board ucm files on x86?
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [alsa-devel] Per board ucm files on x86?
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [alsa-devel] Per board ucm files on x86?
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [alsa-devel] Per board ucm files on x86?
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [alsa-devel] Per board ucm files on x86?
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [alsa-devel] Per board ucm files on x86?
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [alsa-devel] Per board ucm files on x86?
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Per board ucm files on x86?
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [alsa-devel] Best (non zero) CONFIG_SND_HDA_POWER_SAVE_DEFAULT value ?
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Best (non zero) CONFIG_SND_HDA_POWER_SAVE_DEFAULT value ?
  • From: hdegoede@xxxxxxxxxx (Hans de Goede)
• [PATCH] build-sys: First pass at a meson-ified build system
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] filter-apply: Eliminate nested and redundant hook events.
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)
• [PATCH] "pipe-sink" added option "use_system_clock_for_timing"
  • From: samo_pogacnik@xxxxxxx (Samo Pogačnik)