Open SSL Users

• Thread Index

• Cancelling handshake in the middle
  • From: otisevans98@xxxxxxxxx (Otis Evans)
• Cancelling handshake in the middle
  • From: mkrav@xxxxxxxxxxxxx (Michael Kravchenko)
• Fwd: CONGRATULATION____REF#87670
  • From: jvp@xxxxxxxxxxxxxxx (Johann v. Preußen)
• Fwd: CONGRATULATION____REF#87670
  • From: ben@xxxxxxx (Ben Humpert)
• Fwd: CONGRATULATION____REF#87670
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Fwd: CONGRATULATION____REF#87670
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Building 1.0.2g with
  • From: philton@xxxxxxxxxxxxxxxxxxx (Peter Hilton)
• Properly manage CA-signed certificates that have expired
  • From: ben@xxxxxxx (Ben Humpert)
• Fwd: CONGRATULATION____REF#87670
  • From: jvp@xxxxxxxxxxxxxxx (Johann v. Preußen)
• Fwd: CONGRATULATION____REF#87670
  • From: otisevans98@xxxxxxxxx (Otis Evans)
• Fwd: CONGRATULATION____REF#87670
  • From: otisevans98@xxxxxxxxx (Otis Evans)
• Binaries exit with signature bytes
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Properly manage CA-signed certificates that have expired
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Properly manage CA-signed certificates that have expired
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Properly manage CA-signed certificates that have expired
  • From: ben@xxxxxxx (Ben Humpert)
• Properly manage CA-signed certificates that have expired
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Properly manage CA-signed certificates that have expired
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Properly manage CA-signed certificates that have expired
  • From: warron.french@xxxxxxxxx (warron.french)
• TLS 1.0 in FIPS mode ?
  • From: jonetsu@xxxxxxxxxxxx (jonetsu)
• OpenSSL FIPS test failure starting from version 1.0.2g
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• OpenSSL FIPS test failure starting from version 1.0.2g
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• OpenSSL FIPS test failure starting from version 1.0.2g
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• Binaries exit with signature bytes
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• X509_verify_cert cannot be called twice
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Building 1.0.2g with "no-idea"
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Binaries exit with signature bytes
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: glenm@xxxxxxxxxxxx (Glen Matthews)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Binaries exit with signature bytes
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• X509_verify_cert cannot be called twice
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• X509_verify_cert cannot be called twice
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• X509_verify_cert cannot be called twice
  • From: Michael.Wojcik@xxxxxxxxxxxxxx (Michael Wojcik)
• X509_verify_cert cannot be called twice
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• [openssl-users] X509_verify_cert cannot be called twice
  • From: szilard.pfeiffer@xxxxxxxxxx (Szilárd Pfeiffer)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: glenm@xxxxxxxxxxxx (Glen Matthews)
• X509_verify_cert cannot be called twice
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• X509_verify_cert cannot be called twice
  • From: mydexterid@xxxxxxxxx (DEXTER)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: glenm@xxxxxxxxxxxx (Glen Matthews)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• RDRAND and engine (was: how to generate EC public key from EC private key)
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• X509_verify_cert cannot be called twice
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• X509_verify_cert cannot be called twice
  • From: szilard.pfeiffer@xxxxxxxxxx (Szilárd Pfeiffer)
• X509_verify_cert cannot be called twice
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• SHA1_Update() call leads to segfault
  • From: alex@xxxxxxxxxxxxxxxxx (Alex Lyakas)
• X509_verify_cert cannot be called twice
  • From: mydexterid@xxxxxxxxx (DEXTER)
• Master thesis: implementation of a new ciphersuite into OpenSSL -- feedback wanted
  • From: zj@xxxxxxxxx (Jan Žák)
• Master thesis: implementation of a new ciphersuite into OpenSSL -- feedback wanted
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Master thesis: implementation of a new ciphersuite into OpenSSL -- feedback wanted
  • From: zj@xxxxxxxxx (Jan Žák)
• undefined symbol: SSL_SESSION_hash
  • From: winer632@xxxxxx (=?gb18030?b?d2luZXI2MzI=?=)
• Building 1.0.2g with "no-idea"
  • From: thomas_floodeenjr@xxxxxxxxxx (Floodeenjr, Thomas)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: glenm@xxxxxxxxxxxx (Glen Matthews)
• [openssl-dev] Low level API call to digest SHA1 forbidden in FIPS mode - within openssl code
  • From: jeremy.farrell@xxxxxxxxxx (Jeremy Farrell)
• Building 1.0.2g with "no-idea"
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Building 1.0.2g with "no-idea"
  • From: jetson23@xxxxxxxxxxx (Jason Schultz)
• Build of 1.0.2g fails
  • From: jetson23@xxxxxxxxxxx (Jason Schultz)
• RDRAND and engine (was: how to generate EC public key from EC private key)
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Removing some systems
  • From: wrowe@xxxxxxxxxxxxx (William A Rowe Jr)
• RDRAND and engine (was: how to generate EC public key from EC private key)
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Increased memory consumption noticed when upgrading from openssl 1.0.1 to openssl 1.0.2
  • From: ajrpayne@xxxxxxxxx (Andrew Payne)
• Info about size
  • From: michel.sales@xxxxxxx (Michel)
• Info about size
  • From: thomas.francis.jr@xxxxxxxxx (Thomas Francis, Jr.)
• Info about size
  • From: alfonso@xxxxxxxxxxx (Alfonso Coscione)
• Disable session resumption at compile time (compile equivalent to SSL_OP_NO_TICKET)
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Increased memory consumption noticed when upgrading from openssl 1.0.1 to openssl 1.0.2
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• openssl 1.0.1p PEM_write_bio_RSAPrivateKey fail. error: ASN1_get_object:too long
  • From: sharad.tekale@xxxxxxxxx (Tekale, Sharad)
• Disable session resumption at compile time (compile equivalent to SSL_OP_NO_TICKET)
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Naive: how to generate EC public key from EC private key?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Naive: how to generate EC public key from EC private key?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• How to get verbose output from 'make test'
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• How to get verbose output from 'make test'
  • From: rainer.jung@xxxxxxxxxxx (Rainer Jung)
• How to get verbose output from 'make test'
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Increased memory consumption noticed when upgrading from openssl 1.0.1 to openssl 1.0.2
  • From: ajrpayne@xxxxxxxxx (Andrew Payne)
• How to get verbose output from 'make test'
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• OpenVMS modifications to build scripts
  • From: msteve@xxxxxxxxxxxxxxx (Michael Steve)
• How to configure without OPENSSL_die?
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• How to configure without OPENSSL_die?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Naive: how to generate EC public key from EC private key?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• help on des_cblock
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• help on des_cblock
  • From: jqian@xxxxxxxxx (Jason Qian)
• help on des_cblock
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• help on des_cblock
  • From: jqian@xxxxxxxxx (Jason Qian)
• Naive: how to generate EC public key from EC private key?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Questions about OCB and Wrap modes
  • From: michel.sales@xxxxxxx (Michel)
• Questions about OCB and Wrap modes
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• openssl 1.0.1p PEM_write_bio_RSAPrivateKey fail. error: ASN1_get_object:too long
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] openssl 1.0.1p PEM_write_bio_RSAPrivateKey fail. error: ASN1_get_object:too long
  • From: sharad.tekale@xxxxxxxxx (Tekale, Sharad)
• Naive: how to generate EC public key from EC private key?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Naive: how to generate EC public key from EC private key?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Naive: how to generate EC public key from EC private key?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Naive: how to generate EC public key from EC private key?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• [openssl-dev] openssl 1.0.1p PEM_write_bio_RSAPrivateKey fail. error: ASN1_get_object:too long
  • From: jeremy.farrell@xxxxxxxxxx (Jeremy Farrell)
• Help with CRL stuff
  • From: Ian_Jones@xxxxxxxxxxxxxxxxx (Jones, Ian)
• Removing some systems
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• About no-ssl2
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• About no-ssl2
  • From: richmoore44@xxxxxxxxx (Richard Moore)
• About no-ssl2
  • From: michel.sales@xxxxxxx (Michel)
• 0.9.8 - 1.0.0 DER format breaking change
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• About no-ssl2
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• About no-ssl2
  • From: richmoore44@xxxxxxxxx (Richard Moore)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• About no-ssl2
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• About no-ssl2
  • From: michel.sales@xxxxxxx (Michel)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• 0.9.8 - 1.0.0 DER format breaking change
  • From: krzysztof.modras@xxxxxxxxx (Krzysztof Modras)
• OpenSSL version 1.1.0 pre release 4 published
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: lists@xxxxxxxxxxxxxxx (lists)
• OpenSSL version 1.1.0 pre release 4 published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• openssl-users Digest, Vol 16, Issue 26
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• openssl-users Digest, Vol 16, Issue 26
  • From: rajesh_seetharam@xxxxxxxx (rajesh_seetharam@xxxxxxxx)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: akihana@xxxxxxxxx (Mike Mohr)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: jeremy.farrell@xxxxxxxxxx (Jeremy Farrell)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: akihana@xxxxxxxxx (Mike Mohr)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• openssl 1.0.1p PEM_write_bio_RSAPrivateKey fail. error: ASN1_get_object:too long
  • From: sharad.tekale@xxxxxxxxx (Tekale, Sharad)
• Questions about OCB and Wrap modes
  • From: michel.sales@xxxxxxx (Michel)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: akihana@xxxxxxxxx (Mike Mohr)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: ethan.rahn@xxxxxxxxx (Ethan Rahn)
• Verifying the sha1 of fipscanister.o with what is embedded in libcrypto.so
  • From: satya@xxxxxxxxxxxxxxxxxx (Satya Das)
• [Question] What are the current secure Configure Parameter?
  • From: richmoore44@xxxxxxxxx (Richard Moore)
• [Question] What are the current secure Configure Parameter?
  • From: googleersatz@xxxxxxxxxxxxxxxx (Oliver Niebuhr)
• [Question] What are the current secure Configure Parameter?
  • From: rich@xxxxxxx (Richard Moore)
• [Question] What are the current secure Configure Parameter?
  • From: googleersatz@xxxxxxxxxxxxxxxx (Oliver Niebuhr)
• Building 1.0.1g with "no-idea"
  • From: jetson23@xxxxxxxxxxx (Jason Schultz)
• Build of 1.0.1g fails
  • From: jetson23@xxxxxxxxxxx (Jason Schultz)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: lists@xxxxxxxxxxxxxxx (lists)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: mihertz@xxxxxx (Michael)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: angel@xxxxxxxxxxxxxx (Ángel González)
• [openssl-dev] Question: Make X509_V_FLAG_TRUSTED_FIRST default in 1.0.2?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Question: Make X509_V_FLAG_TRUSTED_FIRST default in 1.0.2?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: mihertz@xxxxxx (mihertz@xxxxxx)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• openssl 1.0.2g build fails with 'no-comp' or 'no-comp no-bio' configure options?
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• openssl 1.0.2g build linking to wrong libs -- 'system' instead of 'own'. How to correct?
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• problems with s_client recognizing revoked intermediate/subordinate ca
  • From: michael@xxxxxxxxxxxxxxx (michael@xxxxxxxxxxxxxxx)
• openssl 1.0.2g build linking to wrong libs -- 'system' instead of 'own'. How to correct?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• openssl 1.0.2g build fails with 'no-comp' or 'no-comp no-bio' configure options?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• openssl 1.0.2g build fails with 'no-comp' or 'no-comp no-bio' configure options?
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• openssl 1.0.2g build fails with 'no-comp' or 'no-comp no-bio' configure options?
  • From: jeremy.farrell@xxxxxxxxxx (Jeremy Farrell)
• openssl 1.0.2g build linking to wrong libs -- 'system' instead of 'own'. How to correct?
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• openssl 1.0.2g build fails with 'no-comp' or 'no-comp no-bio' configure options?
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• OpenSSL in unit tests - setup/teardown issue
  • From: rwelty@xxxxxxxxxx (Richard Welty)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• 'makedepend' in openssl builds: clarify need and correct usage
  • From: pgnet.dev@xxxxxxxxx (PGNet Dev)
• [Question] What are the current secure Configure Parameter?
  • From: swall@xxxxxxxxxx (Wall, Stephen)
• enc oddities, bad decrypt, bad magig, too bad
  • From: michel.sales@xxxxxxx (Michel)
• SSL_accept returning error
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• SSL_accept returning error
  • From: sahib.jakhar@xxxxxxxxx (Sahib Jakhar)
• [Question] What are the current secure Configure Parameter?
  • From: googleersatz@xxxxxxxxxxxxxxxx (Oliver Niebuhr)
• Trouble compiling in version 0.9.8h
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• SSL_accept returning error
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• smime -sign changes?
  • From: weber@xxxxxxxxxxx (weber@xxxxxxxxxxx)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: ohaya@xxxxxxxxx (o haya)
• smime -sign changes?
  • From: weber@xxxxxxxxxxx (weber@xxxxxxxxxxx)
• OpenSSL cannot decrypt RC4-encrypted CMS object
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• SSL_accept returning error
  • From: sahib.jakhar@xxxxxxxxx (Sahib Jakhar)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: ohaya@xxxxxxxxx (o haya)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: ohaya@xxxxxxxxx (o haya)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• SSL_accept error code
  • From: BYan@xxxxxxxx (Yan, Bob)
• Something causing "Error 12"/Expired CRL during CRL processing
  • From: ohaya@xxxxxxxxx (o haya)
• FIPS Performance Question
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• SSL_CTX_new fails some times
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• SSL_CTX_new fails some times
  • From: lloydkl.tech@xxxxxxxxx (Lloyd)
• SSL_accept error code
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Extracting certificate from RFC3161 time stamp response
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• SSL_accept error code
  • From: BYan@xxxxxxxx (Yan, Bob)
• FIPS Performance Question
  • From: jtakahashi2@xxxxxxxxxx (James M Takahashi)
• Extracting certificate from RFC3161 time stamp response
  • From: openssl@xxxxxxxxxxxxxx (Anton Wuerfel)
• no-weak-ssl-ciphers and OPENSSL_NO_WEAK_SSL_CIPHERS?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• no-weak-ssl-ciphers and OPENSSL_NO_WEAK_SSL_CIPHERS?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• no-weak-ssl-ciphers and OPENSSL_NO_WEAK_SSL_CIPHERS?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• verify certificate chain (in memory)
  • From: ls00722@xxxxxxxxx (Lei Sun)
• verify certificate chain (in memory)
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• verify certificate chain (in memory)
  • From: ls00722@xxxxxxxxx (Lei Sun)
• verify certificate chain (in memory)
  • From: ls00722@xxxxxxxxx (Lei Sun)
• verify certificate chain (in memory)
  • From: angel@xxxxxxxxxxxxxx (Ángel González)
• verify certificate chain (in memory)
  • From: ls00722@xxxxxxxxx (Lei Sun)
• test for DROWN CVE
  • From: angel@xxxxxxxxxxxxxx (Ángel González)
• test for DROWN CVE
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• test for DROWN CVE
  • From: sanumesh@xxxxxxxxxx (Sandeep Umesh)
• recommended build options
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• recommended build options
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• recommended build options
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Developing CA with Openssl library
  • From: bgiles@xxxxxxxxxxxxxx (Bear Giles)
• Need some information about TLS with AES-GCM
  • From: medulla_oblongata@xxxxxxxxxxx (Medulla Oblongata)
• recommended build options
  • From: swall@xxxxxxxxxx (Wall, Stephen)
• Developing CA with Openssl library
  • From: lists@xxxxxxxxxxxxxxx (lists)
• DROWN (CVE-2016-0800)
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• DROWN (CVE-2016-0800)
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• recommended build options
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Guidance on proper usage of OpenSSL_add_all_digests
  • From: thomas.francis.jr@xxxxxxxxx (Thomas Francis, Jr.)
• recommended build options
  • From: swall@xxxxxxxxxx (Wall, Stephen)
• DROWN (CVE-2016-0800)
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• Guidance on proper usage of OpenSSL_add_all_digests
  • From: chris.gray@xxxxxxxxx (chris.gray@xxxxxxxxx)
• DROWN (CVE-2016-0800)
  • From: Michael.Wojcik@xxxxxxxxxxxxxx (Michael Wojcik)
• DROWN (CVE-2016-0800)
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• DROWN (CVE-2016-0800)
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• Guidance on proper usage of OpenSSL_add_all_digests
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Guidance on proper usage of OpenSSL_add_all_digests
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• DROWN (CVE-2016-0800)
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• DROWN (CVE-2016-0800)
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• Guidance on proper usage of OpenSSL_add_all_digests
  • From: pdrotter@xxxxxxxxxx (Neptune)
• 1.0.2g build fails on Windows
  • From: norm.green@xxxxxxxxxxxxxxxxxx (Norm Green)
• Developing CA with Openssl library
  • From: michel.sales@xxxxxxx (Michel)
• Developing CA with Openssl library
  • From: thirumalkumarkanakurthi@xxxxxxxxx (thirumalkumarkanakurthi@xxxxxxxxx)
• OpenSSL 1.0.2g compile fails on OS X 10.11.3 - make depend: Command not found
  • From: jlbrown@xxxxxxxxxxxx (James Brown)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• OpenSSL 1.0.1s-fips build failing in tests step
  • From: Andrew_Porter@xxxxxxx (Porter, Andrew)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• OpenSSL 1.0.1s-fips tests failing
  • From: Andrew_Porter@xxxxxxx (Porter, Andrew)
• stunnel 5.31 released
  • From: Michal.Trojnara@xxxxxxxxxxx (Michal Trojnara)
• Build OpenSSL-Release on Linux: "make tests" problems with certificates
  • From: rhermann@xxxxxxxxxxxxxxxxxx (Rob Hermann)
• OpenSSL Security Advisory
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• OpenSSL version 1.0.2g published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• OpenSSL version 1.0.1s published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• OpenSSL 1.0.2f build issue - unresolved external symbol
  • From: atulthosar@xxxxxxxxx (Atul Thosar)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• How to properly use ui_method in ENGINE_load_private_key()?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Building OpenSSL: OpenSSL-Release, expired certificates
  • From: rhermann@xxxxxxxxxxxxxxxxxx (Rob Hermann)
• Building OpenSSL: OpenSSL-Release Permission denied
  • From: rhermann@xxxxxxxxxxxxxxxxxx (Rob Hermann)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• default cipher suit
  • From: zhjwpku@xxxxxxxxx (John Hunter)
• "These are not the patches you are looking for"
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• How to properly use ui_method in ENGINE_load_private_key()?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• upgrade to 1.0.1r breaks script that worked for years. Config issue?
  • From: lists@xxxxxxxxxxxxxxx (lists)
• upgrade to 1.0.1r breaks script that worked for years. Config issue?
  • From: lists@xxxxxxxxxxxxxxx (lists)
• default cipher suit
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• default cipher suit
  • From: zhjwpku@xxxxxxxxx (John Hunter)
• PEM_read and write SSL_SESSION
  • From: shubham13099@xxxxxxxxxxx (Shubham Chauhan)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Is verification supposed to fail with SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT without SSL_CTX_set_client_CA_list?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Is verification supposed to fail with SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT without SSL_CTX_set_client_CA_list?
  • From: michel.sales@xxxxxxx (Michel)
• Is verification supposed to fail with SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT without SSL_CTX_set_client_CA_list?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Is verification supposed to fail with SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT without SSL_CTX_set_client_CA_list?
  • From: michel.sales@xxxxxxx (Michel)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Is verification supposed to fail with SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT without SSL_CTX_set_client_CA_list?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• PEM_read and write SSL_SESSION
  • From: shubham13099@xxxxxxxxxxx (Shubham Chauhan)
• PEM_read and write SSL_SESSION
  • From: michel.sales@xxxxxxx (Michel)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Need information on AES encryption and decryption Key and IV type
  • From: michel.sales@xxxxxxx (Michel)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• SMIME: 1.0.0e vs. 1.0.1e
  • From: c.holper@xxxxxxx (c.holper@xxxxxxx)
• Need information on AES encryption and decryption Key and IV type
  • From: sugu.ece28@xxxxxxxxx (Sugumar)
• FIPS 140-2 red letter puzzle resolved
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• PEM_read and write SSL_SESSION
  • From: shubham13099@xxxxxxxxxxx (Shubham Chauhan)
• How to retrieve the revoked certificate list when X509_LOOKUP_hash_dir() method used
  • From: janjust@xxxxxxxxx (Jan Just Keijser)
• Is anyone else getting spammed by databreachtoday.com, or is it just me?
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Maintaining a file for session cache - server side
  • From: shubham13099@xxxxxxxxxxx (Shubham Chauhan)
• Is anyone else getting spammed by databreachtoday.com, or is it just me?
  • From: erik@xxxxxxxx (Erik Forsberg)
• Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Is anyone else getting spammed by databreachtoday.com, or is it just me?
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: cloud.force858@xxxxxxxxx (cloud force)
• How to retrieve the revoked certificate list when X509_LOOKUP_hash_dir() method used
  • From: BYan@xxxxxxxx (Yan, Bob)
• Failed TLSv1.2 handshake with error 67702888--bad signature
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: cloud.force858@xxxxxxxxx (cloud force)
• "digest check failure" with AmigaOS3/m68k port of OpenSSL 1.0.x
  • From: mail@xxxxxxxxxxxx (Jens Maus)
• Is the structure of this CMS object correct?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Forthcoming OpenSSL releases
  • From: mark@xxxxxxxxxxx (Mark J Cox)
• glibc detected *** xxx: double free or corruption (!prev): 0x097b8750
  • From: akihana@xxxxxxxxx (Mike Mohr)
• glibc detected *** xxx: double free or corruption (!prev): 0x097b8750
  • From: vikas.tm@xxxxxxxxx (Vikas TM)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: cloud.force858@xxxxxxxxx (cloud force)
• RSA_generate_key fails in FIPS Mode with key size 2048
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Problem getting actual Client protocol version on server side
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• upgrade to 1.0.1r breaks script that worked for years. Config issue?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Problem getting actual Client protocol version on server side
  • From: gagandeep209@xxxxxxxxx (Gagandeep Singh Panesar)
• Problem getting actual Client protocol version on server side
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Problem getting actual Client protocol version on server side
  • From: gagandeep209@xxxxxxxxx (Gagandeep Singh Panesar)
• upgrade to 1.0.1r breaks script that worked for years. Config issue?
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• RSA_generate_key fails in FIPS Mode with key size 2048
  • From: pdrotter@xxxxxxxxxx (Neptune)
• upgrade to 1.0.1r breaks script that worked for years. Config issue?
  • From: lists@xxxxxxxxxxxxxxx (lists)
• automatic renegotiation
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• automatic renegotiation
  • From: michal@xxxxxxxx (michal michal)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: security.veteran@xxxxxxxxx (security veteran)
• Assembly code errors while building openssl-1.0.2f on Ubuntu 14.04
  • From: datta.pm@xxxxxxxxx (Datta Prabhu Maddikunta)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Helps needed regarding the error "fingerprint does not match:fips.c:232:"
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Is the structure of this CMS object correct?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• [openssl-dev] Ubsec and Chil engines
  • From: sander@xxxxxxxxx (Sander Temme)
• Firefox problems with two way SSL auth
  • From: xerces9+osl@xxxxxxxxx (David Balažic)
• ECDHE PSK ciphersuites
  • From: krzysiekw444@xxxxxxxxx (krzysztof w)
• ECDHE PSK ciphersuites
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• ECDHE PSK ciphersuites
  • From: krzysiekw444@xxxxxxxxx (krzysztof w)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• Is the structure of this CMS object correct?
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• ECDHE PSK ciphersuites
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• ECDHE PSK ciphersuites
  • From: krzysiekw444@xxxxxxxxx (krzysztof w)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• FIPS mode errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• How to define server cert in openssl.cnf ?
  • From: S.Runkel@xxxxxxxxxxxx (Stefan Runkel)
• How to define server cert in openssl.cnf ?
  • From: S.Runkel@xxxxxxxxxxxx (Stefan Runkel)
• Simple sample of using engine?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• FIPS 140-2 red letter puzzle
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• [openssl-dev] Ubsec and Chil engines
  • From: levitte@xxxxxxxxxxx (Richard Levitte)
• [openssl-dev] Ubsec and Chil engines
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-dev] Ubsec and Chil engines
  • From: levitte@xxxxxxxxxxx (Richard Levitte)
• Problem in decryption using python which cipher text is encrypted in c++
  • From: michel.sales@xxxxxxx (Michel)
• Warning OPENSSL_1.0.0 not found (custom build OpenSSL library)
  • From: sasc0041@xxxxxxxxxxxxx (Sandra Schreiner)
• Problem in decryption using python which cipher text is encrypted in c++
  • From: sugu.ece28@xxxxxxxxx (Sugumar)
• Warning OPENSSL_1.0.0 not found (custom build OpenSSL library)
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• Warning OPENSSL_1.0.0 not found (custom build OpenSSL library)
  • From: sasc0041@xxxxxxxxxxxxx (Sandra Schreiner)
• [openssl-dev] Ubsec and Chil engines
  • From: jaroslav.imrich@xxxxxxxxx (Jaroslav Imrich)
• [openssl-dev] Ubsec and Chil engines
  • From: levitte@xxxxxxxxxxx (Richard Levitte)
• [openssl-dev] Ubsec and Chil engines
  • From: sander@xxxxxxxxx (Sander Temme)
• Getting a compilation error on openssl 1.0.1 branch
  • From: bobbyphilip@xxxxxxxxx (Bobby Philip)
• OPENSSL error:21072077:PKCS7 routines:PKCS7_decrypt in FIPS mode
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• OPENSSL error:21072077:PKCS7 routines:PKCS7_decrypt in FIPS mode
  • From: pdrotter@xxxxxxxxxx (Neptune)
• Problem in decryption using python which cipher text is encrypted in c++
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Problem in decryption using python which cipher text is encrypted in c++
  • From: sugu.ece28@xxxxxxxxx (Sugumar)
• [openssl-dev] Ubsec and Chil engines
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-dev] Ubsec and Chil engines
  • From: jaroslav.imrich@xxxxxxxxx (Jaroslav Imrich)
• Ubsec and Chil engines
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• building OpenSSL 1.1.0 pre release 3 in debug mode
  • From: cocommisso@xxxxxxxxxxxxxx (Cosimo Commisso)
• SMIME: 1.0.0e vs. 1.0.1e
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• SMIME: 1.0.0e vs. 1.0.1e
  • From: c.holper@xxxxxxx (c.holper@xxxxxxx)
• Getting a compilation error on openssl 1.0.1 branch
  • From: bobbyphilip@xxxxxxxxx (Bobby Philip)
• Valid strings to be passed to EVP_get_digestbyname()
  • From: Michael.Wojcik@xxxxxxxxxxxxxx (Michael Wojcik)
• SMIME: 1.0.0e vs. 1.0.1e
  • From: c.holper@xxxxxxx (c.holper@xxxxxxx)
• Valid strings to be passed to EVP_get_digestbyname()
  • From: naynjain@xxxxxxxxxx (Nayna Jain)
• Supported cipher suites
  • From: krzysiekw444@xxxxxxxxx (krzysztof w)
• Changing the encoding in openssl
  • From: shetty.bharathraj@xxxxxxxxx (Bharathraj Shetty)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: dev@xxxxxxx (PGNd)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: dev@xxxxxxx (PGNd)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: dev@xxxxxxx (PGNd)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: dev@xxxxxxx (PGNd)
• follow-up to: ChaCha20/Poly1305 in OpenSSL?
  • From: dev@xxxxxxx (PGNd)
• Statically link FIPS OpenSSL to shared library application
  • From: gustavotabares@xxxxxxxxx (Gustavo Tabares)
• Statically link FIPS OpenSSL to shared library application
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Intermittent SSL_shutdown error
  • From: sahib.jakhar@xxxxxxxxx (Sahib Jakhar)
• Possible bug - SSL_ERROR_RX_UNEXPECTED_CHANGE_CIPHER error in FireFox 44.0
  • From: shaun.amyotte@xxxxxxxxx (Shaun Amyotte)
• Statically link FIPS OpenSSL to shared library application
  • From: pdrotter@xxxxxxxxxx (Neptune)
• Statically link FIPS OpenSSL to shared library application
  • From: gustavotabares@xxxxxxxxx (Gustavo Tabares)
• ciphers
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-dev] OpenSSL version 1.1.0 pre release 3 published
  • From: beldmit@xxxxxxxxx (Dmitry Belyavsky)
• ciphers
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• ciphers
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• ciphers
  • From: openssl.org@xxxxxxxxxxxxxxxxxx (mlrx)
• ciphers
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• OpenSSL
  • From: mofassir_haque@xxxxxxxxx (Mofassir Ul Haque)
• ciphers
  • From: openssl.org@xxxxxxxxxxxxxxxxxx (mlrx)
• OpenSSL
  • From: rajesh_seetharam@xxxxxxxx (rajesh_seetharam@xxxxxxxx)
• OpenSSL version 1.1.0 pre release 3 published
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: rhermann@xxxxxxxxxxxxxx (Rob Hermann)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: rhermann@xxxxxxxxxxxxxx (Rob Hermann)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: rhermann@xxxxxxxxxxxxxx (Rob Hermann)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Building OpenSSL on Linux , undefined reference to 'main'
  • From: rhermann@xxxxxxxxxxxxxx (Rob Hermann)
• OpenSSL version 1.1.0 pre release 3 published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• libsrtp-1.5.3 + openssl-1.0.1j + cryptodev engine
  • From: grbesd1@xxxxxxxxx (Ganesh Biradar)
• pkcs12 oddity
  • From: janjust@xxxxxxxxx (Jan Just Keijser)
• Validation status of openssl-fips-2.0.11?
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Validation status of openssl-fips-2.0.11?
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• openssl.ld and global symbols
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Validation status of openssl-fips-2.0.11?
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Validation status of openssl-fips-2.0.11?
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• regarding SSL security
  • From: karl@xxxxxxxxxxxxx (Karl Denninger)
• no version information available error
  • From: scott_n@xxxxxxxxx (Scott Neugroschl)
• no version information available error
  • From: cloud.force858@xxxxxxxxx (cloud force)
• ciphers
  • From: openssl.org@xxxxxxxxxxxxxxxxxx (mlrx)
• regarding SSL security
  • From: Suman.Patro-TRN@xxxxxxxxxx (R-D intern)
• Firefox problems with two way SSL auth
  • From: xerces9+osl@xxxxxxxxx (David Balažic)
• Decrypt TCP session
  • From: tshort@xxxxxxxxxx (Short, Todd)
• Decrypt TCP session
  • From: lloydkl.tech@xxxxxxxxx (Lloyd)
• 2-key vs 3-key 3DES
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• FIPS mode errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• FIPS mode errors
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• FIPS mode errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• 2-key vs 3-key 3DES
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• OpenSSL lib build errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• PKCS12 command ignore -cipher option silently
  • From: michel.sales@xxxxxxx (Michel)
• [openssl-dev] Removing obsolete crypto from OpenSSL 1.1 - seeking feedback
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• regarding SSL security
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• [openssl-dev] Removing obsolete crypto from OpenSSL 1.1 - seeking feedback
  • From: valerie.fenwick@xxxxxxxxxx (Valerie Anne Fenwick)
• OpenSSL lib build errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Errors in building 1.0.2f
  • From: alex_chen@xxxxxxxxxxxxx (Alex Chen)
• regarding SSL security
  • From: Suman.Patro-TRN@xxxxxxxxxx (R-D intern)
• no version information available error
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Win32 - PEM_read_PrivateKey crash
  • From: lloydkl.tech@xxxxxxxxx (Lloyd)
• Win32 - PEM_read_PrivateKey crash
  • From: lloydkl.tech@xxxxxxxxx (Lloyd)
• Errors in building 1.0.2f
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Working around servers requiring SSL 2/3 record layer, and using TLS 1.2?
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• Working around servers requiring SSL 2/3 record layer, and using TLS 1.2?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Working around servers requiring SSL 2/3 record layer, and using TLS 1.2?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Working around servers requiring SSL 2/3 record layer, and using TLS 1.2?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Errors in building 1.0.2f
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Working around servers requiring SSL 2/3 record layer, and using TLS 1.2?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• OpenSSL lib build errors
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Errors in building 1.0.2f
  • From: alex_chen@xxxxxxxxxxxxx (Alex Chen)
• no version information available error
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Configure and config in openssl source folder
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• Configure and config in openssl source folder
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Configure and config in openssl source folder
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• Configure and config in openssl source folder
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• Configure and config in openssl source folder
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Configure and config in openssl source folder
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Configure and config in openssl source folder
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• How do I verify the FIPS mode
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Configure and config in openssl source folder
  • From: cloud.force858@xxxxxxxxx (cloud force)
• How do I verify the FIPS mode
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• How do I verify the FIPS mode
  • From: lesley.j.kimmel@xxxxxxxxx (Lesley Kimmel)
• How do I verify the FIPS mode
  • From: lesley.j.kimmel@xxxxxxxxx (Lesley Kimmel)
• How do I verify the FIPS mode
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Compilation with both options "no-comp" and "zlib" fails
  • From: axel.luttgens@xxxxxxxxx (Axel Luttgens)
• FIPS 140-2 X9.31 RNG transition finally complete
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• OpenSSL library/development problems on OpenSUSE 13.2
  • From: markp@xxxxxx (Mark Parr)
• FIPS Object Module v2.0 and openssl security patches
  • From: aerowolf@xxxxxxxxx (Kyle Hamilton)
• OpenSSL library/development problems on OpenSUSE 13.2
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• OpenSSL library/development problems on OpenSUSE 13.2
  • From: markp@xxxxxx (Mark Parr)
• FIPS Object Module v2.0 and openssl security patches
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS Object Module v2.0 and openssl security patches
  • From: cloud.force858@xxxxxxxxx (cloud force)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• Is the structure of this CMS object correct?
  • From: Erwann.Abalea@xxxxxxxxxxxx (Erwann Abalea)
• FIPS building scripts does NOT work for iOS >=7
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• Is the structure of this CMS object correct?
  • From: Erwann.Abalea@xxxxxxxxxxxx (Erwann Abalea)
• Is the structure of this CMS object correct?
  • From: stm@xxxxxxxxxx (Stephan Mühlstrasser)
• FIPS building scripts does NOT work for iOS >=7
  • From: hongyang99@xxxxxxxxx (Yang Hong)
• Extra EPOLLIN event at end of SSL connection
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• Do you use the JPAKE feature?
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Extra EPOLLIN event at end of SSL connection
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Extra EPOLLIN event at end of SSL connection
  • From: martin@xxxxxxxxxxxxxxxxxxxxxxxx (counterpoint)
• Extra EPOLLIN event at end of SSL connection
  • From: martin@xxxxxxxxxxxxxxxxxxxxxxxx (counterpoint)
• FIPS 140-2 X9.31 RNG transition ... still in transition
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Encrypt/Decrypt files using openssl's crypto libraries
  • From: openssl@xxxxxxx (Wesley)
• Encrypt/Decrypt files using openssl's crypto libraries
  • From: openssl@xxxxxxx (Wesley)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• WARNING message "can't open config file??? when running openssl command
  • From: BYan@xxxxxxxx (Yan, Bob)
• WARNING message "can't open config file??? when running openssl command
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• FIPS building scripts does NOT work for iOS >=7
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS building scripts does NOT work for iOS >=7
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS building scripts does NOT work for iOS >=7
  • From: hongyang99@xxxxxxxxx (Yang Hong)
• [openssl-users] WARNING message "can't open config file” when running openssl command
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-users] WARNING message "can't open config file” when running openssl command
  • From: BYan@xxxxxxxx (Yan, Bob)
• Enforcing FIPS via Cipher Suites Declaration
  • From: lesley.j.kimmel@xxxxxxxxx (Lesley Kimmel)
• [openssl-users] WARNING message "can't open config file” when running openssl command
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-users] WARNING message "can't open config file” when running openssl command
  • From: BYan@xxxxxxxx (Yan, Bob)
• [openssl-users] WARNING message "can't open config file” when running openssl command
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• WARNING message "can't open config file” when running openssl command
  • From: BYan@xxxxxxxx (Yan, Bob)
• Fw: [openssl-dev] Evolution of build refactoring
  • From: levitte@xxxxxxxxxxx (Richard Levitte)
• Enforcing FIPS via Cipher Suites Declaration
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Enforcing FIPS via Cipher Suites Declaration
  • From: thomas.francis.jr@xxxxxxxxx (Thomas Francis, Jr.)
• SSL EV - jurisdictionCountryName - UTF8
  • From: nn33lik@xxxxxxxx (Juanan)
• Enforcing FIPS via Cipher Suites Declaration
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Enforcing FIPS via Cipher Suites Declaration
  • From: lesley.j.kimmel@xxxxxxxxx (Lesley Kimmel)
• Certificate verification failure
  • From: BYan@xxxxxxxx (Yan, Bob)
• Certificate verification failure
  • From: janjust@xxxxxxxxx (Jan Just Keijser)
• How to run one test when gcc is not used ?
  • From: tony.reix@xxxxxxxx (REIX, Tony)
• 1.0.2f : crypto/opensslv.h : SHLIB_VERSION_NUMBER is still "1.0.0"
  • From: tony.reix@xxxxxxxx (REIX, Tony)
• 1.0.2f : crypto/opensslv.h : SHLIB_VERSION_NUMBER is still "1.0.0"
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• 1.0.2f : crypto/opensslv.h : SHLIB_VERSION_NUMBER is still "1.0.0"
  • From: tony.reix@xxxxxxxx (REIX, Tony)
• FIPS Static Library linked into Win32 Dll builds but fails self test
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Minumum Key Size Supported by HMAC in FIPS Mode
  • From: mofassir_haque@xxxxxxxxx (Mofassir Ul Haque)
• Rgd. CVE-2015-3197 fix test verification !!
  • From: hareesh.sai@xxxxxxxxx (Hareesh D)
• OpenSSL FIPS: OPENSSL_config() and self-tests
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• How to enable FIPS mode system-wide for the FIPS capable OpenSSL?
  • From: security.veteran@xxxxxxxxx (security veteran)
• OpenSSL FIPS: OPENSSL_config() and self-tests
  • From: security.veteran@xxxxxxxxx (security veteran)
• FIPS Static Library linked into Win32 Dll builds but fails self test
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• FIPS Static Library linked into Win32 Dll builds but fails self test
  • From: pdrotter@xxxxxxxxxx (Neptune)
• FIPS Static Library linked into Win32 Dll builds but fails self test
  • From: pdrotter@xxxxxxxxxx (Neptune)
• Help with M2Crypto on Windows?
  • From: mcepl@xxxxxxx (Matěj Cepl)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• error when linking with OpenSSL library dynamically
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• error when linking with OpenSSL library dynamically
  • From: martin.vegter9@xxxxxxxxx (Martin Vegter)
• Strange problem with 1.0.2f SSL_shutdown in multithreaded server
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• error when linking with OpenSSL library dynamically
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• error when linking with OpenSSL library dynamically
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• OpenSSL FIPS: OPENSSL_config() and self-tests
  • From: security.veteran@xxxxxxxxx (security veteran)
• How to enable FIPS mode system-wide for the FIPS capable OpenSSL?
  • From: security.veteran@xxxxxxxxx (security veteran)
• error when linking with OpenSSL library dynamically
  • From: martin.vegter9@xxxxxxxxx (Martin Vegter)
• Certificate verification failure
  • From: BYan@xxxxxxxx (Yan, Bob)
• config no-symlinks option generates an issue on AIX for version 1.0.2f (and 1.0.1r)
  • From: tony.reix@xxxxxxxx (REIX, Tony)
• How do I verify the pin of USBKEY?
  • From: redmond@xxxxxxx (Redmond@139.)
• Certificate Chain Verify Error
  • From: mainardinicholas@xxxxxxxxx (Nicholas Mainardi)
• Certificate Chain Verify Error
  • From: fm@xxxxxxxxxxxx (Frank Migge)
• Certificate Chain Verify Error
  • From: mainardinicholas@xxxxxxxxx (Nicholas Mainardi)
• Certificate verification failure
  • From: janjust@xxxxxxxxx (Jan Just Keijser)
• Configure with both options "no-comp" and "zlib"
  • From: axel.luttgens@xxxxxxxxx (Axel Luttgens)
• Certificate verification failure
  • From: BYan@xxxxxxxx (Yan, Bob)
• How to enable FIPS mode system-wide for the FIPS capable OpenSSL?
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Building without SOVERSION
  • From: armin.novak@xxxxxxxxxxxx (Armin Novak)
• Problem in RSA encrypt and Decrypt using EVP
  • From: sugu.ece28@xxxxxxxxx (Sugumar)
• How to enable FIPS mode system-wide for the FIPS capable OpenSSL?
  • From: security.veteran@xxxxxxxxx (security veteran)
• stunnel 5.30 released
  • From: Michal.Trojnara@xxxxxxxxxxx (Michal Trojnara)
• SSL version status
  • From: karl@xxxxxxxxxxxxx (Karl Denninger)
• OpenSSL Security Advisory
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• OpenSSL version 1.0.2f published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• OpenSSL version 1.0.1r published
  • From: openssl@xxxxxxxxxxx (OpenSSL)
• Acessing a proxy with OpenSSL
  • From: marcosbontempo@xxxxxxxxxxx (Marcos Bontempo)
• Acessing a proxy with OpenSSL
  • From: ted@xxxxxxxxx (Bernhard Fröhlich)
• Acessing a proxy with OpenSSL
  • From: marcosbontempo@xxxxxxxxxxx (Marcos Bontempo)
• SSL keys and certificates for FIPS and non-FIPS mode
  • From: cloud.force858@xxxxxxxxx (cloud force)
• OpenSSL FIPS modules and APIs compatibility
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• OpenSSL FIPS modules and APIs compatibility
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• OpenSSL FIPS modules and APIs compatibility
  • From: cloud.force858@xxxxxxxxx (cloud force)
• SSL version status
  • From: nuliknol@xxxxxxxxx (Nulik Nol)
• SSL version status
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• FIPS Certification
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS Certification
  • From: Imran.Ali@xxxxxxxxxxxx (Imran Ali)
• FIPS Certification
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS Certification
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• FIPS Certification
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS Certification
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• FIPS Certification
  • From: Imran.Ali@xxxxxxxxxxxx (Imran Ali)
• FIPS Certification
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• FIPS Certification
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• FIPS Certification
  • From: Imran.Ali@xxxxxxxxxxxx (Imran Ali)
• SSL version status
  • From: nuliknol@xxxxxxxxx (Nulik Nol)
• SSL_accept appears to be stuck
  • From: yesprabhu@xxxxxxxxx (Prabhu S)
• A path for feature obsolescence
  • From: secaficionado@xxxxxxxxx (Sec_Aficiondado)
• parse tlsext error in response to client hello
  • From: Owen.Wieck@xxxxxxxxxxx (Wieck, Owen)
• FIPS 140-2 X9.31 RNG transition partially done
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• parse tlsext error in response to client hello
  • From: matt@xxxxxxxxxxx (Matt Caswell)
• parse tlsext error in response to client hello
  • From: Owen.Wieck@xxxxxxxxxxx (Wieck, Owen)
• parse tlsext error in response to client hello
  • From: Owen.Wieck@xxxxxxxxxxx (Wieck, Owen)
• Forthcoming OpenSSL releases
  • From: mark@xxxxxxxxxxx (Mark J Cox)
• libcrypto.so is missing in build
  • From: ranshalit@xxxxxxxxx (Ran Shalit)
• OpenSSL FIPS modules license
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• OpenSSL FIPS modules license
  • From: security.veteran@xxxxxxxxx (security veteran)
• Apache (2.x) server and OpenSSL FIPS modules
  • From: swall@xxxxxxxxxx (Wall, Stephen)
• compiling stud proxy with the latest SSL
  • From: kirubak@xxxxxxxxxxxxxxxxx (Kirubakaran Kaliannan)
• OpenSSL FIPS Object Module v2.0
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• OpenSSL FIPS Object Module v2.0
  • From: Imran.Ali@xxxxxxxxxxxx (Imran Ali)
• [openssl-dev] Openssl 1.1 and Bind 9.6 ESV R11
  • From: doctor@xxxxxxxxxxxxxxxxx (The Doctor)
• Getting the current key exchange algorithm mode from an SSL_CIPHER
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Getting the current key exchange algorithm mode from an SSL_CIPHER
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Using TCP Fast Open with OpenSSL
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Using TCP Fast Open with OpenSSL
  • From: sara@xxxxxxxxxxx (Sara Dickinson)
• Getting the current key exchange algorithm mode from an SSL_CIPHER
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-dev] Openssl 1.1 and Bind 9.6 ESV R11
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Getting the current key exchange algorithm mode from an SSL_CIPHER
  • From: Eric.Erhardt@xxxxxxxxxxxxx (Eric Erhardt)
• [openssl-dev] Openssl 1.1 and Bind 9.6 ESV R11
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• Using TCP Fast Open with OpenSSL
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] Openssl 1.1 and Bind 9.6 ESV R11
  • From: doctor@xxxxxxxxxxxxxxxxx (The Doctor)
• Using TCP Fast Open with OpenSSL
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Using TCP Fast Open with OpenSSL
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• Using TCP Fast Open with OpenSSL
  • From: sara@xxxxxxxxxxx (Sara Dickinson)
• Questions regarding the openssl FIPS self-tests
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Questions regarding the openssl FIPS self-tests
  • From: cloud.force858@xxxxxxxxx (cloud force)
• [openssl-dev] Openssl 1.1 and Bind 9.6 ESV R11
  • From: bkaduk@xxxxxxxxxx (Benjamin Kaduk)
• Openssl 1.1 and Bind 9.6 ESV R11
  • From: doctor@xxxxxxxxxxxxxxxxx (The Doctor)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• What version of OpenSSL source can be built with FIPS modules?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• What version of OpenSSL source can be built with FIPS modules?
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• What version of OpenSSL source can be built with FIPS modules?
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• What version of OpenSSL source can be built with FIPS modules?
  • From: security.veteran@xxxxxxxxx (security veteran)
• What version of OpenSSL source can be built with FIPS modules?
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: security.veteran@xxxxxxxxx (security veteran)
• What version of OpenSSL source can be built with FIPS modules?
  • From: security.veteran@xxxxxxxxx (security veteran)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: security.veteran@xxxxxxxxx (security veteran)
• regarding openssl 1.0.2e
  • From: Suman.Patro-TRN@xxxxxxxxxx (Suman.Patro-TRN)
• regarding openssl 1.0.2e
  • From: Suman.Patro-TRN@xxxxxxxxxx (R-D intern)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: marquess@xxxxxxxxxxx (Steve Marquess)
• Does OpenSSL FIPS modules only affect libcrypto.so
  • From: security.veteran@xxxxxxxxx (security veteran)
• Digest MD5 forbidden in FIPS mode
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• How to access some simple conversion functions - asn1_time_to_tm
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• Integrating OpenSSL FIPS modules with languages like Python and PHP
  • From: security.veteran@xxxxxxxxx (security veteran)
• Apache (2.x) server and OpenSSL FIPS modules
  • From: security.veteran@xxxxxxxxx (security veteran)
• How to access some simple conversion functions - asn1_time_to_tm
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• Digest MD5 forbidden in FIPS mode
  • From: ethan.rahn@xxxxxxxxx (Ethan Rahn)
• Digest MD5 forbidden in FIPS mode
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• Digest MD5 forbidden in FIPS mode
  • From: marcosbontempo@xxxxxxxxxxx (Marcos Bontempo)
• How to access some simple conversion functions - asn1_time_to_tm
  • From: steve@xxxxxxxxxxx (Dr. Stephen Henson)
• How to access some simple conversion functions - asn1_time_to_tm
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• How to access some simple conversion functions - asn1_time_to_tm
  • From: nounou.dadoun@xxxxxxxxxxxx (Nounou Dadoun)
• possible Bug in OpenSSL - rfc 3161 - TSA service
  • From: rfcustodio@xxxxxxxxx (custodio)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: jeremy.farrell@xxxxxxxxxx (Jeremy Farrell)
• Updating TLS1.1 to TLS1.2
  • From: kurt@xxxxxxxxx (Kurt Roeckx)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• Updating TLS1.1 to TLS1.2
  • From: diganta.bhattacharjee@xxxxxxxxxx (Diganta Bhattacharjee)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• Encryption/decryption using parameters obtained via handshake (SSL_accept/SSL_connect)
  • From: tkachyov@xxxxxxxxxxx (vgt)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• [openssl-dev] OPenssl and dependencies such as openssh
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• OPenssl and dependencies such as openssh
  • From: doctor@xxxxxxxxxxxxxxxxx (The Doctor)
• BN_exp
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• BN_exp
  • From: p_levesque555@xxxxxxxxxxx (Philippe Levesque)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: noloader@xxxxxxxxx (Jeffrey Walton)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• How to fix OpenSSL 1.0.1q Windows x86_64 build failure?
  • From: wangqun@xxxxxxxxxxxxxxxxx (Aaron)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: jb-openssl@xxxxxxxxxx (Jakob Bohm)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: openssl-users@xxxxxxxxxxxx (Viktor Dukhovni)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: rsalz@xxxxxxxxxx (Salz, Rich)
• [openssl-dev] pkeyutl does not invoke hash?
  • From: uri@xxxxxxxxxx (Blumenthal, Uri - 0553 - MITLL)
• Signing a csr with subjectAltName using x509 command
  • From: trajber@xxxxxxxxx (Mauro Romano Trajber)