Linux Watchdog

• Thread Index

• Re: dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v4,2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3,3/3] dt-bindings: watchdog: add mpc8xxx-wdt support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3,2/3] watchdog: mpc8xxx: provide boot status
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Bad MAINTAINERS pattern in section 'MEN Z069 WATCHDOG DRIVER'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Default behavior of watchdog drivers
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: watchdog: add mpc8xxx-wdt support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH V2 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 1/8] dt-bindings: mfd: document stpmic1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• RE: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v5 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v5 0/2] Add support for RZ/A2 wdt
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v4 1/4] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v4 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v4 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v4 3/4] documentation: watchdog: add documentation for armada-37xx-wdt
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v4 0/4] Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v3 1/4] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH V2 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2 1/8] dt-bindings: mfd: document stpmic1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] watchdog/hpwdt: Disable PreTimeout when Timeout is smaller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog/hpwdt: Disable PreTimeout when Timeout is smaller
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Julia Cartwright <julia@xxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Julia Cartwright <julia@xxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Tim Sander <tim@xxxxxxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Julia Cartwright <julia@xxxxxx>
• Re: [PATCH v3 2/3] watchdog: mpc8xxx: provide boot status
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [BUG] dw_wdt watchdog on linux-rt 4.18.5-rt4 not triggering
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: sama5d4: write the mode register in two steps
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• [PATCH v3 1/3] watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH v3 2/3] watchdog: mpc8xxx: provide boot status
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH v3 3/3] dt-bindings: watchdog: add mpc8xxx-wdt support
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [v4,2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v4,1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3, 3/4] documentation: watchdog: add documentation for armada-37xx-wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: sama5d4: fix timeout-sec usage
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 2/2] watchdog: sama5d4: write the mode register in two steps
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: mpc8xxx: provide boot status
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: watchdog: add mpc8xxx-wdt support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] wdt: lantiq: add get_timeleft callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] wdt: lantiq: update register names to better match spec
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: mpc8xxx: provide boot status
  • From: Christophe LEROY <christophe.leroy@xxxxxx>
• Re: [PATCH 1/2] watchdog: sama5d4: fix timeout-sec usage
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH v2 3/3] dt-bindings: watchdog: add mpc8xxx-wdt support
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH v2 2/3] watchdog: mpc8xxx: provide boot status
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 2/2] watchdog: sama5d4: write the mode register in two steps
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 0/2] Fixes for the SAMA5D2/SAMA5D4 watchdog
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• [PATCH 1/2] watchdog: sama5d4: fix timeout-sec usage
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• [PATCH 2/2] watchdog: sama5d4: write the mode register in two steps
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• [PATCH v3 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 3/3] wdt: lantiq: add get_timeleft callback
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 1/3] wdt: lantiq: update register names to better match spec
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 0/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH] watchdog: mpc8xxx: provide boot status
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: mpc8xxx: provide boot status
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] watchdog: diag288_wdt: pointer location foo * bar should be foo *bar
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: diag288_wdt: pointer location foo * bar should be foo *bar
  • From: Jagdish Tirumala <t.jag587@xxxxxxxxx>
• Re: [PATCH] WATCHDOG: DIAG288_WDT: Fixed error POINTER_LOCATION
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] WATCHDOG: uniphier_wdt.c: Fixed error do not initialise statics to 0
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] WATCHDOG: DIAG288_WDT: Fixed error POINTER_LOCATION
  • From: Jagdish Tirumala <t.jag587@xxxxxxxxx>
• [PATCH] WATCHDOG: uniphier_wdt.c: Fixed error do not initialise statics to 0
  • From: Jagdish Tirumala <t.jag587@xxxxxxxxx>
• Re: [PATCH v3 0/2] rtc: abx80x: add basic watchdog support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/2] rtc: abx80x: add basic watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 0/2] rtc: abx80x: add basic watchdog support
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• [PATCH 2/2] rtc: abx80x: add basic watchdog support
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• [PATCH 1/2] rtc: abx80x: use a 'priv' struct for client data
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: rza_wdt: convert to SPDX identifiers
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 2/2] rtc: abx80x: add basic watchdog support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/2] rtc: abx80x: add basic watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] rtc: abx80x: use a 'priv' struct for client data
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• [PATCH 2/2] rtc: abx80x: add basic watchdog support
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] rtc: abx80x: add basic watchdog support
  • From: Jeremy Gebben <jgebben@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v4 0/2] Add support for RZ/A2 wdt
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 01/24] mfd: Add ingenic-tcu.h header
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [v2,1/3] wdt: lantiq: update register names to better match spec
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: watchdog: renesas_wdt: convert to SPDX identifiers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: fix a small number of "watchog" typos in comments
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: fix a small number of "watchog" typos in comments
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH V2 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH] watchdog: rza_wdt: convert to SPDX identifiers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: renesas_wdt: convert to SPDX identifiers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V2 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 1/4] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v3 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v3 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v3 3/4] documentation: watchdog: add documentation for armada-37xx-wdt
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v3 0/4] Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH V2 0/8] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH V2 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH] watchdog: rza_wdt: convert to SPDX identifiers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] watchdog: renesas_wdt: convert to SPDX identifiers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH v3 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v3 0/2] Add support for RZ/A2 wdt
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/2] watchdog: rza_wdt: Support longer timeouts
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 0/2] watchdog: Add support for RZ/A2 wdt
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] watchdog: hpwdt: Bug Fixes/Enhancement
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH] watchdog: rza_wdt: Extend clock sources for RZ/A2
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [RFC PATCH v3 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v3 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v2 1/4] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v2 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v2 3/4] documentation: watchdog: add documentation for armada-37xx-wdt
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v2 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v2 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v2,1/3] wdt: lantiq: update register names to better match spec
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH 2/2] watchdog: renesas_wdt: stop when unregistering
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] watchdog: core: fix null pointer dereference when releasing cdev
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behun <marek.behun@xxxxxx>
• [PATCH v2 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 3/3] wdt: lantiq: add get_timeleft callback
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 1/3] wdt: lantiq: update register names to better match spec
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 0/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.19-rc2
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 2/2] watchdog: iTCO_wdt: Remove unused hooks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: iTCO_wdt: Drop option vendorsupport=2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] watchdog: iTCO_wdt: Remove unused hooks
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/2] watchdog: iTCO_wdt: Drop option vendorsupport=2
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behun <marek.behun@xxxxxx>
• [PATCH 1/2] watchdog: Add support for Armada 37xx CPU watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH 2/2] arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [RFC PATCH v3 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [RFC PATCH v3 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [RFC PATCH v3 4/4] watchdog: i6300esb: avoid removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 3/4] watchdog: core: add module_watchdog_pci_driver()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 2/4] watchdog: renesas_wdt: avoid removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 0/4] watchdog: prevent removing a driver if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH v2 4/4] watchdog: i6300esb: avoid removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 3/4] watchdog: core: add module_watchdog_pci_driver()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 2/4] watchdog: renesas_wdt: avoid removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 0/4] watchdog: prevent removing a driver if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 1/4] watchdog: core: add mechanism to prevent removing if NOWAYOUT
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [RFC PATCH] watchdog: HACK: disable bind attributes with NOWAYOUT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH] watchdog: HACK: disable bind attributes with NOWAYOUT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH] watchdog: HACK: disable bind attributes with NOWAYOUT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: renesas_wdt: stop when unregistering
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: core: fix null pointer dereference when releasing cdev
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH] watchdog: HACK: disable bind attributes with NOWAYOUT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: renesas_wdt: stop when unregistering
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: core: fix null pointer dereference when releasing cdev
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] watchdog: fix OOPS when using stop_on_unregister and use it for R-Car
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] watchdog: use SPDX identifier for Renesas drivers
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 11/11] watchdog: use SPDX identifier for Renesas drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 11/11] watchdog: use SPDX identifier for Renesas drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/11] tree-wide: use SPDX identifier for Renesas drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 24/24] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 23/24] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 22/24] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 21/24] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 03/24] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 01/24] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 15/24] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 16/24] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 17/24] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 18/24] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 20/24] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 19/24] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 00/24] TCU patchset v7
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: hpwdt: Update Driver Documentation.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/8] mfd: stpmu1: add stpmu1 pmic driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH] watchdog: hpwdt: Update Driver Documentation.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.19 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/5] watchdog: hpwdt: Update version number.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] watchdog: hpwdt: Module paramerter alias.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] watchdog: hpwdt: Display module parameters.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] watchdog: hpwdt: Claim NMI from iLO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] watchdog: hpwdt: Initialize pretimeout from module parameter.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• Re: [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 24/24] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 23/24] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 22/24] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 01/24] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 00/24] Ingenic TCU patchset v6
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 21/24] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 15/24] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 17/24] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 16/24] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 18/24] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 20/24] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 19/24] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 03/24] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 2/5] watchdog: hpwdt: Claim NMI from iLO
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 1/5] watchdog: hpwdt: Initialize pretimeout from module parameter.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 3/5] watchdog: hpwdt: Display module parameters.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 5/5] watchdog: hpwdt: Update version number.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 4/5] watchdog: hpwdt: Module paramerter alias.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 0/5] watchdog: hpwdt: Bug Fixes/Enhancement
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 2/4] watchdog: hpwdt: Claim NMI from iLO
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 1/4] watchdog: hpwdt: Initialize pretimeout from module parameter.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 3/4] watchdog: hpwdt: Display module parameters.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: hpwdt: Display module parameters.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 6/8] input: stpmu1: add stpmu1 onkey driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (watchdog/menz69_wdt.c)
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: hpwdt: Update version number.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: hpwdt: Display module parameters.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: hpwdt: Claim NMI from iLO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] watchdog: hpwdt: Initialize pretimeout from module parameter.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (watchdog/menz69_wdt.c)
  • From: Johannes Thumshirn <jth@xxxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (watchdog/menz69_wdt.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: hpwdt: Claim NMI from iLO
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH 0/4] watchdog: hpwdt: Bug Fixes/Enhancement
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH 3/4] watchdog: hpwdt: Display module parameters.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH 4/4] watchdog: hpwdt: Update version number.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH 1/4] watchdog: hpwdt: Initialize pretimeout from module parameter.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v2] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 21/21] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 01/21] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 03/21] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 07/21] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 02/21] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 13/21] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 10/21] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 17/21] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 06/21] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 00/21] Ingenic JZ47xx TCU patchset v5
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 20/21] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 05/21] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 15/21] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 09/21] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 11/21] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 16/21] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 12/21] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 19/21] MIPS: CI20: Reduce system timer clock to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 18/21] MIPS: qi_lb60: Use 750 kHz system timer & enable clocksource
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] wdt: lantiq: update register names to better match spec
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/3] wdt: lantiq: Convert to watchdog_device
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 3/3] wdt: lantiq: add get_timeleft callback
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 1/3] wdt: lantiq: update register names to better match spec
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Michael Moese <mmoese@xxxxxxx>
• Re: [PATCH v2] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: regulator: document stpmu1 pmic regulators
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/8] mfd: stpmu1: add stpmu1 pmic driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mfd: document stpmu1 pmic
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: watchdog: davinci_wdt: add possibility to configure watchdog period
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: davinci_wdt: add possibility to configure watchdog period
  • From: Michele Dionisio <michele.dionisio@xxxxxxxxx>
• Re: watchdog: davinci_wdt: add possibility to configure watchdog period
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• watchdog: davinci_wdt: add possibility to configure watchdog period
  • From: michele.dionisio@xxxxxxxxx
• watchdog: davinci_wdt: add possibility to configure watchdog period
  • From: michele.dionisio@xxxxxxxxx
• [PATCH v2] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: add driver for the MEN 16z069 IP-Core
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH V5 0/5] add iwdg2 support for stm32mp157c
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• [PATCH -next] watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• Re: [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: stmp3xxx: Switch to SPDX identifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: stmp3xxx: Switch to SPDX identifier
  • From: Fabio Estevam <fabio.estevam@xxxxxxx>
• [PATCH v2 1/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Fabio Estevam <fabio.estevam@xxxxxxx>
• [PATCH 2/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Fabio Estevam <fabio.estevam@xxxxxxx>
• [PATCH 1/2] watchdog: imx2_wdt: Switch to SPDX identifier
  • From: Fabio Estevam <fabio.estevam@xxxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH v3] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [RFC PATCH v2] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [RFC PATCH v2] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] mfd: stpmu1: add stpmu1 pmic driver
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v2] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH v2] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: "Tian, Baofeng" <baofeng.tian@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Should gpio_wdt be enhanced?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: stm32: replace "%p" with "%pK"
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Should gpio_wdt be enhanced?
  • From: David Frey <DFrey@xxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: stm32: replace "%p" with "%pK"
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [RFC PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: "Tian, Baofeng" <baofeng.tian@xxxxxxxxx>
• Re: [PATCH 8/8] watchdog: stpmu1: add stpmu1 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/8] regulator: stpmu1: add stpmu1 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH] watchdog: sp805: Add clock-frequency property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 0/8] Introduce STPMU1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 5/8] dt-bindings: input: document stpmu1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 7/8] dt-bindings: watchdog: document stpmu1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 4/8] regulator: stpmu1: add stpmu1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 6/8] input: stpmu1: add stpmu1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 2/8] mfd: stpmu1: add stpmu1 pmic driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 3/8] dt-bindings: regulator: document stpmu1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 8/8] watchdog: stpmu1: add stpmu1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH 1/8] dt-bindings: mfd: document stpmu1 pmic
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: add NMI handler for iTCO watchdog
  • From: "Tian, Baofeng" <baofeng.tian@xxxxxxxxx>
• RE: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: "Tian, Baofeng" <baofeng.tian@xxxxxxxxx>
• RE: [PATCH] watchdog: change ITCO_WDT type from tristate to bool
  • From: "Tian, Baofeng" <baofeng.tian@xxxxxxxxx>
• [RFC PATCH] watchdog: sp805: Add clock-frequency property
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: add NMI handler for iTCO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: add module parameter "force_no_reboot" for iTCO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: change ITCO_WDT type from tristate to bool
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v4, 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v4,1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 0/5] add iwdg2 support for stm32mp157c
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH V5 5/5] ARM: dts: stm32: update iwdg with lsi clock name for stm32f429
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 4/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 3/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 2/5] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V4 1/4] dt-bindings: watchdog: add stm32mp1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH V5 2/5] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V5 0/5] add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V5 3/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V5 5/5] ARM: dts: stm32: update iwdg with lsi clock name for stm32f429
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V5 4/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• Re: [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: watchdog: add stm32mp1 support
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V4 4/4] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V4 2/4] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V4 0/4] add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V4 3/4] ARM: dts: stm32: add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH V3 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• Re: [PATCH V3 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH V3 3/3] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V3 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V3 2/3] ARM: dts: stm32: add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V3 0/3] add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• Re: [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• Re: [PATCH V2 0/3] add iwdg2 support for stm32mp157c
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V2 0/3] add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V2 3/3] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V2 2/3] ARM: dts: stm32: add iwdg2 support for stm32mp157c
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.18 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• [PATCH] rtc: stmp3xxx: Don't reset the rtc in .probe() when watchdog is running
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• Re: [PATCH v4 0/6] Enhance support for the SP805 WDT
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v4 0/6] Enhance support for the SP805 WDT
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• RE: [PATCH v2 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH v2 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• Re: watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 0/2] watchdog: da9063: small improvements
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH 2/2] watchdog: da9063: remove duplicated timeout_to_sel calls
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/2] watchdog: da9063: small improvements
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH] watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• Re: [PATCH] watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: orion_wdt: add wdt status init for handle_boot_enabled
  • From: Кочетков Максим <fido_max@xxxxxxxx>
• [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 6/6] arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 3/6] watchdog: sp805: add 'timeout-sec' DT property support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v4 0/6] Enhance support for the SP805 WDT
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v9 3/3] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v9 2/3] watchdog: da9063: Fix updating timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v9 1/3] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v9 3/3] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v9 2/3] watchdog: da9063: Fix updating timeout value
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v9 1/3] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v9 0/3] watchdog: da9063: Fix timeout handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH v8 1/4] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v8 4/4] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v8 0/4] watchdog: da9063: Fix timeout handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v8 2/4] watchdog: da9063: Fix updating timeout value
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v8 3/4] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/5] watchdog: da9063: Fix timeout handling
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 4/5] watchdog: da9063: Fix timeout handling during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 2/5] watchdog: da9063: Fix setting HW_RUNNING indication during wdt_start
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 3/5] watchdog: da9063: Fix updating timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v7 5/5] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v7 4/5] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v7 3/5] watchdog: da9063: Fix updating timeout value
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v7 2/5] watchdog: da9063: Fix setting HW_RUNNING indication during wdt_start
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v7 0/5] watchdog: da9063: Fix timeout handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v7 1/5] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] watchdog: sp805: add 'timeout-sec' DT property support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 6/6] arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v3 0/6] Enhance support for the SP805 WDT
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/6] watchdog: sp805: add 'timeout-sec' DT property support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 6/6] arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 4/6] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 2/6] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 1/6] Documentation: DT: Consolidate SP805 binding docs
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 0/6]Enhance support for the SP805 WDT
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/5] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Scott Branden <scott.branden@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH v6 2/5] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 1/5] watchdog: da9063: rename helper function to avoid misunderstandings
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 5/5] watchdog: da9063: Fix timeout handling during probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 0/5] watchdog: da9063: Fix timeout handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 4/5] watchdog: da9063: Fix updating timeout value
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 3/5] watchdog: da9063: set HW_RUNNING indication during wdt_start
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Scott Branden <scott.branden@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 2/5] watchdog: sp805: add 'timeout-sec' DT property support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/5] watchdog: sp805: add 'timeout-sec' DT property support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH 4/5] arm64: dt: set initial SR watchdog timeout to 60 seconds
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH 5/5] arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH 3/5] watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH 1/5] Documentation: DT: Add optional 'timeout-sec' property for sp805
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH 0/5] Enhance support for the SP805 WDT
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] MIPS: jz4780: dts: Fix watchdog node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: remove unused code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: da9062: remove unused code
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2] watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v4] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: da9063: Fix setting/changing timeout
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• RE: [PATCH v3] watchdog: da9063: Fix setting/changing timeout
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH v3] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <guenter@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Enable RENESAS_WDT
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: James Hogan <jhogan@xxxxxxxxxx>
• Re: [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: James Hogan <jhogan@xxxxxxxxxx>
• Re: [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: James Hogan <jhogan@xxxxxxxxxx>
• [PATCH v3 2/8] watchdog: jz4740: Use devm_* functions
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 4/8] watchdog: JZ4740: Drop module remove function
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 3/8] watchdog: JZ4740: Register a restart handler
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 6/8] MIPS: jz4780: dts: Fix watchdog node
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 7/8] MIPS: qi_lb60: Enable the jz4740-wdt driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 8/8] MIPS: jz4740: Drop old platform reset code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 5/8] MIPS: jz4740: dts: Add bindings for the jz4740-wdt driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 1/8] watchdog: JZ4740: Disable clock after stopping counter
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
• [PATCH v2] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <mfe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: da9063: Fix setting/changing timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] watchdog: da9063: Fix setting/changing timeout
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: sp805: add restart handler
  • From: Jongsung Kim <neidhard.kim@xxxxxxx>
• Re: [PATCH] watchdog: mena21_wdt: Drop unnecessary mutex lock
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>