Linux Watchdog

• Thread Index

• [PATCH v10 0/9] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 5/8] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: imx_sc: Add i.MX system controller watchdog support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH 4/4] arm64: dts: freescale: imx8qxp: add watchdog support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH 3/4] arm64: defconfig: add support for i.MX system controller watchdog
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH 1/4] dt-bindings: fsl: scu: add watchdog binding
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH 0/4] Add i.MX8QXP system controller watchdog support
  • From: Anson Huang <anson.huang@xxxxxxx>
• print active stack on watchdog pre timeout for separate irq stack
  • From: "Mehrtens, Hauke" <hauke.mehrtens@xxxxxxxxx>
• Re: [PATCH v9 5/8] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v9 3/8] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v9 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v9 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 7/8] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 6/8] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 5/8] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 3/8] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 1/8] mfd: regulator: clk: split rohm-bd718x7.h
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 0/8] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.20 031/105] watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 26/83] watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] watchdog/hpwdt: Update Kconfig documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog/hpwdt: Update Kconfig documentation
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: What to set in struct watchdog_device::bootstatus?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• What to set in struct watchdog_device::bootstatus?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 3/3] Documentation/watchdog: Add documentation mlx-wdt driver
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v2 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v2 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v2 0/3] introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• RE: [PATCH v1 0/3] introduce watchdog driver for Mellanox systems.
  • From: Michael Shych <michaelsh@xxxxxxxxxxxx>
• RE: [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems.
  • From: Michael Shych <michaelsh@xxxxxxxxxxxx>
• Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 1/8] mfd: regulator: clk: split rohm-bd718x7.h
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v8 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 7/8] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 6/8] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 5/8] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 3/8] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 1/8] mfd: regulator: clk: split rohm-bd718x7.h
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v8 0/8] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/3] introduce watchdog driver for Mellanox systems.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 00/10] support ROHM BD70528 PMIC
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v7 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 3/3] Documentation/watchdog: Add documentation mlx-wdt driver
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 0/3] introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 3/3] Documentation/watchdog: Add documentation mlx-wdt driver
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v1 0/3] introduce watchdog driver for Mellanox systems.
  • From: michaelsh@xxxxxxxxxxxx
• [PATCH v7 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v7 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v6 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Update sysfs documentation.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: Update sysfs documentation.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• Re: [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• Re: [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [RFC PATCH v4 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC PATCH v3 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Rasmus Villemoes <Rasmus.Villemoes@xxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH AUTOSEL 4.20 149/304] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 125/258] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 082/170] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 00/10] support ROHM BD70528 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 05/10] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 03/10] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 02/10] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 00/10] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw: remove useless pr_fmt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw: use devm_watchdog_register_device()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw: use devm_watchdog_register_device()
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw: use devm_watchdog_register_device()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: dw: remove useless pr_fmt
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• [PATCH] watchdog: dw: use devm_watchdog_register_device()
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v8 00/26] Ingenic TCU patchset v8
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 00/26] Ingenic TCU patchset v8
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• [PATCH -next] watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 04/13] clk: bd718x7: use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v1 00/13] support ROHM BD70528 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v9 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v9 3/3] watchdog: make the device time out at open_deadline when open_timeout is used
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v9 0/3] watchdog: allow setting deadline for opening /dev/watchdogN
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.0-rc Fixes
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v5.0-rc Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• [PATCHv2] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] watchdog: qcom: Add suspend/resume support
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v8 0/3] watchdog: allow setting deadline for opening /dev/watchdogN
  • From: Esben Haabendal <esben@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [GIT PULL] Immutable branch between MFD, Input and Watchdog due for the v5.1 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v8 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v8 3/3] watchdog: make the device time out at open_deadline when open_timeout is used
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v8 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v8 0/3] watchdog: allow setting deadline for opening /dev/watchdogN
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: mt7621: Fix compiler error, missing include
  • From: René van Dorst <opensource@xxxxxxxxxx>
• Re: [PATCH] watchdog: mt7621: Fix compiler error, missing include
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• [PATCH RESEND v8 4/6] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 1/6] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 3/6] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 5/6] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 6/6] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 2/6] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH RESEND v8 0/6] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [RFC PATCH 2/4] watchdog: hpwdt: Don't panic on foreign NMI
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• [RFC PATCH 3/4] watchdog: hpwdt: Add more information into message
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled
  • From: Ivan Mironov <mironov.ivan@xxxxxxxxx>
• Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/5] BCM2835 PM driver
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: wm831x: Use GPIO descriptor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: wm831x: Use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 0/5] BCM2835 PM driver
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v4.21 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.21 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
  • From: NeilBrown <neil@xxxxxxxxxx>
• Re: [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v9 00/27] Ingenic TCU patchset v9
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 08/27] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 18/27] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] watchdog: add documentation for PM usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: add documentation for PM usage
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: docs: kernel-api: don't reference removed functions
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: add documentation for PM usage
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: docs: kernel-api: don't reference removed functions
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: mena21_wdt: Convert to GPIO descriptors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3,3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3,2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v4 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v4 0/5] BCM2835 PM driver
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v4 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v4 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v8 24/26] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 23/26] MIPS: GCW0: Move clocksource to TCU channel 2
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 19/26] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 22/26] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 21/26] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 17/26] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 00/26] Ingenic TCU patchset v8
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 08/26] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 04/26] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 09/26] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 20/26] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 14/26] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 07/26] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 02/26] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 16/26] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 06/26] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 18/26] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 10/26] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 13/26] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 26/26] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 25/26] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Watchdog: remove outdated comment
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH] Watchdog: remove outdated comment
  • From: Hardik Singh Rathore <hardiksingh.k@xxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 3/3] watchdog/hpwdt: Update driver version.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog/hpwdt: Do not claim unsupported hardware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog/hpwdt: Exclude via blacklist
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/3] watchdog/hpwdt: Update driver version.
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 0/3] watchdog/hpwdt: Do not claim on unsupported hardware
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 1/3] watchdog/hpwdt: Exclude via blacklist
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 2/3] watchdog/hpwdt: Do not claim unsupported hardware
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] watchdog/hpwdt: Do not claim unsupported hardware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] watchdog/hpwdt: Do not claim unsupported hardware
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 2/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: x86_64 NMI watchdog false positive, watchdog_overflow_callback fires at random period
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• x86_64 NMI watchdog false positive, watchdog_overflow_callback fires at random period
  • From: Lin Feng <linf@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: renesas_wdt: Fix typos
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] watchdog: mtx-1: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• [PATCH 2/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• [PATCH 1/2] watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• [PATCH 0/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [PATCH v3 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v3 0/5] BCM2835 PM driver (MFD version respin)
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v3 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v3 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v3 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 3/7] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 2/7] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 1/7] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 4/7] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 7/7] regulator: stpmic1: fix regulator_lock usage
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 6/7] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v7 5/7] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH] watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v6 0/8] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v3 1/3] watchdog: Add pm8916 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v3 1/3] watchdog: Add pm8916 watchdog driver
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: Add pm8916 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v2 1/3] watchdog: Add pm8916 watchdog driver
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH 0/8] BCM2835 PM driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v2 0/5] BCM2835 PM driver (MFD version)
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v2 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v2 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v2 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH v2 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH 0/8] BCM2835 PM driver
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH 0/8] BCM2835 PM driver
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 6/8] soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 7/8] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 8/8] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 2/8] soc: bcm: bcm2835-pm: Rename the driver to its new "PM" name.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 5/8] dt-bindings: soc: Add a new binding for the BCM2835 PM node.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 3/8] soc: bcm: bcm2835-pm: Stop using _relaxed mmio accessors.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 4/8] soc: bcm: bcm2835-pm: Make some little accessor macros for the mmio area.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 0/8] BCM2835 PM driver
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] kbuild: announce removal of SUBDIRS if used
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] watchdog: cpwd: add of_node_put()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: cpwd: add of_node_put()
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [PATCH] watchdog: cpwd: add of_node_put()
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• Re: [PATCH] watchdog: cpwd: add of_node_put()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: cpwd: add of_node_put()
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Add pm8916 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: w83627hf_wdt: Add quirk for Inves system
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: w83627hf_wdt: Add quirk for Inves system
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH 1/3] watchdog: Add pm8916 watchdog driver
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: core: suppress "watchdog did not stop" message
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 1/8] dt-bindings: mfd: document stpmic1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: renesas_wdt: Fix typos
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1] watchdog: npcm: Modify npcm watchdog kconfig arch parameter
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1] watchdog: npcm: Modify npcm watchdog kconfig arch parameter
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2] watchdog: renesas_wdt: Fix typos
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: renesas_wdt: Fix typos
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: renesas_wdt: Fix typos
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: renesas_wdt: Fix typos
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: renesas_wdt: Fix typos
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/8] dt-bindings: mfd: document stpmic1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v5 0/8] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v4.20 Merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.20 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 0/8] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v4 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: ts4800: release syscon device node in ts4800_wdt_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: ts4800: release syscon device node in ts4800_wdt_probe()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: mfd: document stpmic1
  • From: Rob Herring <robh@xxxxxxxxxx>
• watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [gnome-shell:1112]
  • From: Cristian <caravena@xxxxxxxxx>
• Re: [PATCH v7 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 16/24] pwm: jz4740: Add support for the JZ4725B
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 15/24] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH watchdog-next] watchdog: armada_37xx_wdt: use do_div for u64 division
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH watchdog-next] watchdog: armada_37xx_wdt: use do_div for u64 division
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: mfd: document stpmic1
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 0/8] Introduce STPMIC1 PMIC Driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 4/8] regulator: stpmic1: add stpmic1 regulator driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 2/8] mfd: stpmic1: add stpmic1 driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey
  • From: Pascal PAILLET-LME <p.paillet@xxxxxx>
• Re: [PATCH] MAINTAINERS: Fix file pattern for MEN Z069 watchdog driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: sama5d4: write the mode register in two steps
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Giel van Schijndel <giel@xxxxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Fix file pattern for MEN Z069 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Default behavior of watchdog drivers
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>