On Mon, Jun 04, 2018 at 05:00:59PM +0200, Marco Felsch wrote:
> Every time da9063_wdt_update_timeout() gets called a timeout_to_sel() is
> made because the timeout argument of update_timeout() is the raw
> register value. Moving the second<->raw-value translation into
> da9063_wdt_update_timeout() removes duplicated code.
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/watchdog/da9063_wdt.c | 21 ++++++++-------------
> 1 file changed, 8 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> index 760aa9bca81b..384dca16af8b 100644
> --- a/drivers/watchdog/da9063_wdt.c
> +++ b/drivers/watchdog/da9063_wdt.c
> @@ -64,8 +64,10 @@ static int da9063_wdt_disable_timer(struct da9063 *da9063)
> DA9063_TWDSCALE_DISABLE);
> }
>
> -static int da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int regval)
> +static int
> +da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout)
> {
> + unsigned int regval;
> int ret;
>
> /*
> @@ -81,6 +83,7 @@ static int da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int regval)
> return ret;
>
> usleep_range(150, 300);
> + regval = da9063_wdt_timeout_to_sel(timeout);
>
> return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> DA9063_TWDSCALE_MASK, regval);
> @@ -89,11 +92,9 @@ static int da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int regval)
> static int da9063_wdt_start(struct watchdog_device *wdd)
> {
> struct da9063 *da9063 = watchdog_get_drvdata(wdd);
> - unsigned int selector;
> int ret;
>
> - selector = da9063_wdt_timeout_to_sel(wdd->timeout);
> - ret = da9063_wdt_update_timeout(da9063, selector);
> + ret = da9063_wdt_update_timeout(da9063, wdd->timeout);
> if (ret)
> dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n",
> ret);
> @@ -132,11 +133,8 @@ static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> unsigned int timeout)
> {
> struct da9063 *da9063 = watchdog_get_drvdata(wdd);
> - unsigned int selector;
> int ret = 0;
>
> - selector = da9063_wdt_timeout_to_sel(timeout);
> -
> /*
> * There are two cases when a set_timeout() will be called:
> * 1. The watchdog is off and someone wants to set the timeout for the
> @@ -148,13 +146,13 @@ static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> * enabling the watchdog, so the timeout must be buffered by the driver.
> */
> if (watchdog_active(wdd))
> - ret = da9063_wdt_update_timeout(da9063, selector);
> + ret = da9063_wdt_update_timeout(da9063, timeout);
>
> if (ret)
> dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
> ret);
> else
> - wdd->timeout = wdt_timeout[selector];
> + wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)];
>
> return ret;
> }
> @@ -220,10 +218,7 @@ static int da9063_wdt_probe(struct platform_device *pdev)
>
> /* Change the timeout to the default value if the watchdog is running */
> if (da9063_wdt_is_running(da9063)) {
> - unsigned int timeout;
> -
> - timeout = da9063_wdt_timeout_to_sel(DA9063_WDG_TIMEOUT);
> - da9063_wdt_update_timeout(da9063, timeout);
> + da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT);
> set_bit(WDOG_HW_RUNNING, &wdd->status);
> }
>
> --
> 2.17.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
