The watchdog can be enabled in previous steps (e.g. the bootloader). Check
if the watchdog is already running, retrieve the set timeout value and
set it again to set the new timeout reference mark.
Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/watchdog/da9063_wdt.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
index 6b0092b7d5a6..c5bd5ffe8ded 100644
--- a/drivers/watchdog/da9063_wdt.c
+++ b/drivers/watchdog/da9063_wdt.c
@@ -45,6 +45,18 @@ static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
return DA9063_TWDSCALE_MAX;
}
+/*
+ * Return 0 if watchdog is disabled, else non zero.
+ */
+static unsigned int da9063_wdt_is_running(struct da9063 *da9063)
+{
+ unsigned int val;
+
+ regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val);
+
+ return val & DA9063_TWDSCALE_MASK;
+}
+
static int da9063_wdt_disable_timer(struct da9063 *da9063)
{
return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
@@ -180,6 +192,7 @@ static int da9063_wdt_probe(struct platform_device *pdev)
{
struct da9063 *da9063;
struct watchdog_device *wdd;
+ unsigned int cur_timeout;
if (!pdev->dev.parent)
return -EINVAL;
@@ -206,6 +219,12 @@ static int da9063_wdt_probe(struct platform_device *pdev)
watchdog_set_drvdata(wdd, da9063);
+ cur_timeout = da9063_wdt_is_running(da9063);
+ if (cur_timeout) {
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+ _da9063_wdt_set_timeout(da9063, cur_timeout);
+ }
+
return devm_watchdog_register_device(&pdev->dev, wdd);
}
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
