Linux Serial

• Thread Index

• [PATCH v4 0/5] serial/8250_fintek Support any configuration
  • From: Ricardo Ribalda Delgado
• Re: [PATCH v3 4/5] serial/8250_fintek: Support keys different than default
  • From: Jiri Slaby
• [PATCH v3 0/5] serial/8250_fintek Support any configuration
  • From: Ricardo Ribalda Delgado
• Re: [PATCH 1/1] serial:8250_fintek: fix setting of private data
  • From: Ricardo Ribalda Delgado
• [PATCH 1/1] serial:8250_fintek: fix setting of private data
  • From: Peter Hung
• Re: wrong usage of gpiod stuff and modem status lines in etraxfs-uart
  • From: Uwe Kleine-König
• RE: Build error -in -next due to 'Bluetooth: hci_uart: Support operational speed during setup'
  • From: Ilya Faenson
• Re: [PATCH 5/5] serial/8250_fintek: Support for any io address.
  • From: Ricardo Ribalda Delgado
• [PATCH v2 1/5] serial/8250_fintek: Use private data structure
  • From: Ricardo Ribalda Delgado
• [PATCH v2 4/5] serial/8250_fintek: Support keys different than default
  • From: Ricardo Ribalda Delgado
• [PATCH v2 5/5] serial/8250_fintek: Support for any io address.
  • From: Ricardo Ribalda Delgado
• [PATCH v2 3/5] serial/8250_fintek: Support for chip_ip 0x0501
  • From: Ricardo Ribalda Delgado
• [PATCH v2 2/5] serial/8250_fintek: Support for multiple base_ports
  • From: Ricardo Ribalda Delgado
• [PATCH v2 0/5] serial/8250_fintek Support any configuration
  • From: Ricardo Ribalda Delgado
• Re: Build error -in -next due to 'Bluetooth: hci_uart: Support operational speed during setup'
  • From: Marcel Holtmann
• RE: Build error -in -next due to 'Bluetooth: hci_uart: Support operational speed during setup'
  • From: Ilya Faenson
• [PATCH] serial/uartlite: Let it build on any arch with IOMEM
  • From: Ricardo Ribalda Delgado
• Re: [PATCH 5/5] serial/8250_fintek: Support for any io address.
  • From: Alan Cox
• Re: Build error -in -next due to 'Bluetooth: hci_uart: Support operational speed during setup'
  • From: Guenter Roeck
• [PATCH 0/5] serial/8250_fintek Support any configuration.
  • From: Ricardo Ribalda Delgado
• [PATCH 1/5] serial/8250_fintek: Use private data structure
  • From: Ricardo Ribalda Delgado
• [PATCH 3/5] serial/8250_fintek: Support for chip_ip 0x0501
  • From: Ricardo Ribalda Delgado
• [PATCH 5/5] serial/8250_fintek: Support for any io address.
  • From: Ricardo Ribalda Delgado
• [PATCH 2/5] serial/8250_fintek: Support for multiple base_ports
  • From: Ricardo Ribalda Delgado
• [PATCH 4/5] serial/8250_fintek: Support keys different than default
  • From: Ricardo Ribalda Delgado
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Dave Martin
• Re: Build error -in -next due to 'Bluetooth: hci_uart: Support operational speed during setup'
  • From: Marcel Holtmann
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Andre Przywara
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Dave P Martin
• Re: wrong usage of gpiod stuff and modem status lines in etraxfs-uart
  • From: Jesper Nilsson
• auart: i.mx28: Added missing spin-lock
  • From: Ankur Patel
• [PATCH/RFC] serial: sh-sci: Fix exclusion of work_fn_rx and sci_dma_rx_complete
  • From: Yoshihiro Kaneko
• [PATCH/RFC] serial: sh-sci: Fix issue of frequent rx_full interrupt
  • From: Yoshihiro Kaneko
• [PATCH] serial: sirf: workaround rx process to avoid possible data loss
  • From: Barry Song
• [PATCH -next v3] sc16is7xx: fix FIFO address of secondary UART
  • From: Jakub Kicinski
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Greg Kroah-Hartman
• Re: [PATCH V2 0/3] Add RS-485 support and fix RTS/CTS implementation
  • From: Greg KH
• Re: [PATCH v2] serial: imx: Revert "initialized DMA w/o HW flow enabled"
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Vinod Koul
• [PATCH] serial: 8250_uniphier: add bindings document for UniPhier UART
  • From: Masahiro Yamada
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Peter Hurley
• [PATCH linux-next v2 1/4] ARM: at91/dt: add a new DT property to support FIFOs on Atmel USARTs
  • From: Cyrille Pitchen
• [PATCH linux-next v2 4/4] tty/serial: at91: use 32bit writes into TX FIFO when DMA is enabled
  • From: Cyrille Pitchen
• [PATCH linux-next v2 3/4] tty/serial: at91: add support to FIFOs
  • From: Cyrille Pitchen
• [PATCH linux-next v2 2/4] tty/serial: at91: fix some macro definitions to fit coding style
  • From: Cyrille Pitchen
• [PATCH linux-next v2 0/4] tty/serial: at91: add support to FIFOs
  • From: Cyrille Pitchen
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Jakub Kiciński
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Peter Hurley
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Jakub Kiciński
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Peter Hurley
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Jakub Kiciński
• Re: [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Jakub Kiciński
• Re: wrong usage of gpiod stuff and modem status lines in etraxfs-uart
  • From: Linus Walleij
• [PATCH 2/2] serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
  • From: Soeren Grunewald
• [PATCH 1/2] serial: 8250_pci: Add support for 12 port Exar boards
  • From: Soeren Grunewald
• [PATCH] serial: sprd: check for NULL after calling devm_clk_get
  • From: Chunyan Zhang
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Maxime Coquelin
• [PATCH RESEND v9] serial: stm32-usart: Add STM32 USART Driver
  • From: Maxime Coquelin
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Peter Hurley
• wrong usage of gpiod stuff and modem status lines in etraxfs-uart
  • From: Uwe Kleine-König
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Greg Kroah-Hartman
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Peter Hurley
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Maxime Coquelin
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Greg Kroah-Hartman
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Maxime Coquelin
• Re: [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Peter Hurley
• Re: [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Peter Hurley
• Re: [PATCH v3 1/2] drivers/tty: refactor functions for flushing/queuing work
  • From: Jiri Slaby
• [PATCH 13/15] tty/serial: kill off set_irq_flags usage
  • From: Rob Herring
• [PATCH v3 1/2] drivers/tty: refactor functions for flushing/queuing work
  • From: Steven Walter
• [PATCH v3 2/2] drivers/tty: use a kthread_worker for low-latency
  • From: Steven Walter
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Bhuvanchandra DV
• Re: [PATCH 2/3] drivers/tty: convert tty_port to use kthread_worker
  • From: Greg KH
• Re: [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Greg KH
• Re: [PATCH 2/3] drivers/tty: convert tty_port to use kthread_worker
  • From: Steven Walter
• Re: [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Steven Walter
• Re: [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Greg KH
• Re: [PATCH 2/3] drivers/tty: convert tty_port to use kthread_worker
  • From: Peter Hurley
• [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Steven Walter
• [PATCH 2/3] drivers/tty: convert tty_port to use kthread_worker
  • From: Steven Walter
• [PATCH v2] Use kthread workers to enable low-latency tty support
  • From: Steven Walter
• [PATCH 1/3] drivers/tty: refactor functions for flushing/queuing work
  • From: Steven Walter
• Re: [PATCH 1/3] drivers/tty: refactor functions for flushing/queuing work
  • From: Greg KH
• [PATCH 2/3] drivers/tty: convert tty_port to use kthread_worker
  • From: Steven Walter
• [PATCH 1/3] drivers/tty: refactor functions for flushing/queuing work
  • From: Steven Walter
• Use kthread workers to enable low-latency tty support
  • From: Steven Walter
• [PATCH 3/3] drivers/tty/tty_buffer.c: use a separate kthread for low_latency
  • From: Steven Walter
• [PATCH v6 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• [PATCH] serial: core: cleanup in uart_get_baud_rate()
  • From: Joakim Nordell
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Dave P Martin
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Robin Murphy
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Russell King - ARM Linux
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Russell King - ARM Linux
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Russell King - ARM Linux
• Re: [PATCH 2/2] serial: etraxfs-uart: Convert to uart_console_device instead of open-coded
  • From: Jesper Nilsson
• Re: [PATCH 1/2] serial: etraxfs-uart: Fix release etraxfs_uart_ports
  • From: Jesper Nilsson
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Bhuvanchandra DV
• Re: [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Uwe Kleine-König
• Re: [PATCH V2 0/3] Add RS-485 support and fix RTS/CTS implementation
  • From: Bhuvanchandra DV
• Re: [PATCH 2/2] serial: etraxfs-uart: Convert to uart_console_device instead of open-coded
  • From: Niklas Cassel
• Re: [PATCH 1/2] serial: etraxfs-uart: Fix release etraxfs_uart_ports
  • From: Niklas Cassel
• [GIT PULL] TTY/Serial fixes for 4.1-rc7
  • From: Greg KH
• Re: [PATCH RFC 0/3] UART slave device support
  • From: Pavel Machek
• Re: [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Robin Murphy
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq
  • From: Dave Martin
• console setting via stdout-path vs console=xxx (was Re: [PATCH 2/4] ARC: [axs101] support early 8250 uart)
  • From: Vineet Gupta
• [PATCH 1/2] serial: 8250: Fix autoconfig_irq() to avoid race conditions
  • From: Taichi Kageyama
• [PATCH 2/2] serial: 8250: Allow to skip autoconfig_irq() for a console
  • From: Taichi Kageyama
• [PATCH 0/2] serial: 8250: Workaround to avoid irq=0 for console
  • From: Taichi Kageyama
• Re: [PATCH 1/1] serial: earlycon: Add support for big-endian MMIO accesses
  • From: Vineet Gupta
• Re: [PATCH 2/4] ARC: [axs101] support early 8250 uart
  • From: Vineet Gupta
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Peter Ujfalusi
• Re: [PATCH linux-next 1/4] ARM: at91/dt: add new DT properties for Atmel usart
  • From: Jakub Kiciński
• [PATCH 3/3] Doc: tty.txt: remove mention of the BKL
  • From: Baruch Siach
• [PATCH 2/3] Doc: serial-rs485.txt: update RS485 driver interface
  • From: Baruch Siach
• [PATCH 1/3] MAINTAINERS: tty: add serial docs directory
  • From: Baruch Siach
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• Re: [Gta04-owner] [PATCH RFC 3/3] misc: Add w2g0004 gps receiver driver
  • From: Christ van Willegen
• Re: Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Peter Hurley
• [PATCH RFC 0/3] UART slave device support
  • From: Dr. H. Nikolaus Schaller
• Output truncated in ssh session after d2b6f44779d3 ("n_tty: Fix signal handling flushes")
  • From: Filipe Brandenburger
• [PATCH linux-next 4/4] tty/serial: at91: use 32bit writes into TX FIFO when DMA is enabled
  • From: Cyrille Pitchen
• [PATCH linux-next 3/4] tty/serial: at91: add support to FIFOs
  • From: Cyrille Pitchen
• [PATCH linux-next 2/4] tty/serial: at91: fix some macro definitions to fit coding style
  • From: Cyrille Pitchen
• [PATCH linux-next 1/4] ARM: at91/dt: add new DT properties for Atmel usart
  • From: Cyrille Pitchen
• [PATCH linux-next 0/4] tty/serial: at91: add support to FIFOs
  • From: Cyrille Pitchen
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Vinod Koul
• Re: [PATCH v10 1/3] uart: pl011: Support registers offset with LUT
  • From: Jun Nie
• [PATCH 2/2] serial: etraxfs-uart: Convert to uart_console_device instead of open-coded
  • From: Axel Lin
• [PATCH 1/2] serial: etraxfs-uart: Fix release etraxfs_uart_ports
  • From: Axel Lin
• Re: [PATCH 3/5] serial: omap: Switch wake-up interrupt to generic wakeirq
  • From: Tony Lindgren
• Re: [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Tony Lindgren
• Re: [PATCH][RFC] gpiolib: rename gpiod_set_array to gpiod_set_array_value
  • From: Linus Walleij
• Re: [PATCH tty-next 0/8] sc16is7xx: various fixes
  • From: Jon Ringle
• Re: [PATCH v10 1/3] uart: pl011: Support registers offset with LUT
  • From: Russell King - ARM Linux
• Re: [PATCH] Adjust register address to regmap_raw_read/write to enable secondary UART
  • From: Jakub Kiciński
• [PATCH V2 3/3] tty: serial: fsl_lpuart: Add support for RS-485
  • From: Bhuvanchandra DV
• [PATCH V2 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Bhuvanchandra DV
• [PATCH V2 1/3] ARM: dts: colibri-vf: Add pinmux for UART_0 aka UART_A RTS/CTS pins
  • From: Bhuvanchandra DV
• [PATCH V2 0/3] Add RS-485 support and fix RTS/CTS implementation
  • From: Bhuvanchandra DV
• [PATCH v10 3/3] uart: pl011: polish registers offset handling
  • From: Jun Nie
• [PATCH v10 2/3] uart: pl011: Add support to ZTE ZX296702 uart
  • From: Jun Nie
• [PATCH v10 1/3] uart: pl011: Support registers offset with LUT
  • From: Jun Nie
• [PATCH v10 0/3] Support uart pl011 on ZTE SOC
  • From: Jun Nie
• Re: [PATCH v9 1/3] uart: pl011: Support registers offset with LUT
  • From: Jun Nie
• Re: [PATCH] Adjust register address to regmap_raw_read/write to enable secondary UART
  • From: Jakub Kicinski
• Re: [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Greg Kroah-Hartman
• Re: [PATCH v9 1/3] uart: pl011: Support registers offset with LUT
  • From: Greg KH
• Re: [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Greg Kroah-Hartman
• Re: [PATCH v5 34/37] serial: 8250_ingenic: support for Ingenic SoC UARTs
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/5] serial: omap: Switch wake-up interrupt to generic wakeirq
  • From: Greg Kroah-Hartman
• [PATCH v2 2/2] doc: dt: add documentation for nxp,lpc1850-uart
  • From: Joachim Eastwood
• [PATCH v2 1/2] serial: 8250: add LPC18xx/43xx UART driver
  • From: Joachim Eastwood
• [PATCH v2 0/2] 8250 UART driver for NXP LPC18xx family
  • From: Joachim Eastwood
• Re: [PATCH] PM / Wakeirq: Fix typo in prototype for dev_pm_set_dedicated_wake_irq
  • From: Rafael J. Wysocki
• [PATCH tty-next 8/8] sc16is7xx: use kworker for RS-485 configuration
  • From: Jakub Kicinski
• [PATCH tty-next 7/8] sc16is7xx: use kworker to update ier bits
  • From: Jakub Kicinski
• [PATCH tty-next 6/8] sc16is7xx: use kworker for md_proc
  • From: Jakub Kicinski
• [PATCH tty-next 5/8] sc16is7xx: move RTS delay to workqueue
  • From: Jakub Kicinski
• [PATCH tty-next 4/8] sc16is7xx: use kthread_worker for tx_work and irq
  • From: Jakub Kicinski
• [PATCH tty-next 3/8] sc16is7xx: use LSR_TEMT_BIT in .tx_empty()
  • From: Jakub Kicinski
• [PATCH tty-next 2/8] sc16is7xx: add missing compatible strings
  • From: Jakub Kicinski
• [PATCH tty-next 1/8] sc16is7xx: remove RS-485 delay RTS handling
  • From: Jakub Kicinski
• [PATCH tty-next 0/8] sc16is7xx: various fixes
  • From: Jakub Kicinski
• [PATCH v5 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH] PM / Wakeirq: Fix typo in prototype for dev_pm_set_dedicated_wake_irq
  • From: Felipe Balbi
• [PATCH] PM / Wakeirq: Fix typo in prototype for dev_pm_set_dedicated_wake_irq
  • From: Tony Lindgren
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Peter Ujfalusi
• Re: [PATCH] Adjust register address to regmap_raw_read/write to enable secondary UART
  • From: Jakub Kicinski
• Re: [PATCH 3/3] tty: serial: fsl_lpuart: Add support for RS-485
  • From: Bhuvanchandra DV
• Re: [PATCH 3/3] tty: serial: fsl_lpuart: Add support for RS-485
  • From: Jakub Kiciński
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Vinod Koul
• Re: [PATCH 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Bhuvanchandra DV
• Re: [PATCH 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Jakub Kiciński
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Geert Uytterhoeven
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Vinod Koul
• [PATCH 2/3] tty: serial: fsl_lpuart: remove RTS/CTS control from set/get_mctrl
  • From: Bhuvanchandra DV
• [PATCH 1/3] ARM: dts: colibri-vf: Add pinmux for UART_0 aka UART_A RTS/CTS pins
  • From: Bhuvanchandra DV
• [PATCH 0/3] Add RS-485 support and fix RTS/CTS implementation
  • From: Bhuvanchandra DV
• [PATCH 3/3] tty: serial: fsl_lpuart: Add support for RS-485
  • From: Bhuvanchandra DV
• Re: [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH v7] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH v4 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• [PATCH] Adjust register address to regmap_raw_read/write to enable secondary UART
  • From: bo . svangard
• SV: [PATCH] serial: sc16is7xx, adjust register address to regmap_raw_read/write to enable secondary UART
  • From: Bo Svangård
• Re: [PATCH 3/5] serial: omap: Switch wake-up interrupt to generic wakeirq
  • From: Tony Lindgren
• Re: [PATCH 5/5] mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
  • From: Tony Lindgren
• Re: [PATCH] serial: sc16is7xx, adjust register address to regmap_raw_read/write to enable secondary UART
  • From: Jakub Kicinski
• Re: [problem] tty: n_gsm
  • From: Jiří Prchal
• Re: [PATCH 07/13] mmc: davinci_mmc: Support for deferred probing when requesting DMA channels
  • From: Ulf Hansson
• Re: [PATCH 05/13] mmc: omap_hsmmc: Support for deferred probing when requesting DMA channels
  • From: Ulf Hansson
• Re: [PATCH 04/13] mmc: omap_hsmmc: No need to check DMA channel validity at module remove
  • From: Ulf Hansson
• Re: [problem] tty: n_gsm
  • From: Jiří Prchal
• Re: [PATCH v4 1/2] serial_core: add pci uart early console support
  • From: Peter Hurley
• Re: [PATCH v4 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH v4 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH 5/5] mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
  • From: Tony Lindgren
• Re: [PATCH 5/5] mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
  • From: Rafael J. Wysocki
• Re: [PATCH 13/13] ASoC: omap-pcm: Switch to use dma_request_slave_channel_compat_reason()
  • From: Mark Brown
• Re: [PATCH 11/13] spi: omap2-mcspi: Support for deferred probing when requesting DMA channels
  • From: Mark Brown
• Re: [PATCH 11/13] spi: omap2-mcspi: Support for deferred probing when requesting DMA channels
  • From: Mark Brown
• Re: [problem] tty: n_gsm
  • From: Jiri Slaby
• Re: [problem] tty: n_gsm
  • From: Jiří Prchal
• Re: [problem] tty: n_gsm
  • From: Greg KH
• [problem] tty: n_gsm
  • From: Jiří Prchal
• Re: [PATCH] serial: core: don't set console cflag to zero
  • From: Peter Hurley
• Re: [PATCH 11/13] spi: omap2-mcspi: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• Re: [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• Re: [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• Re: [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Sekhar Nori
• Re: [PATCH v4 1/2] serial_core: add pci uart early console support
  • From: Peter Hurley
• Re: [PATCH] serial: core: don't set console cflag to zero
  • From: Fabio Estevam
• Re: [PATCH] serial: core: don't set console cflag to zero
  • From: Peter Hurley
• Re: [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Tony Lindgren
• Re: [PATCH 11/13] spi: omap2-mcspi: Support for deferred probing when requesting DMA channels
  • From: Mark Brown
• Re: [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Tony Lindgren
• Re: [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Shevchenko, Andriy
• Re: [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Greg Kroah-Hartman
• RE: [PATCH] serial: core: don't set console cflag to zero
  • From: Duan Andy
• Re: [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Alan Cox
• Re: [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Peter Hurley
• Re: [PATCH] serial: samsung: only use earlycon for console
  • From: Peter Hurley
• Re: [PATCH 08/15] of_serial: support for UARTs on I/O ports
  • From: Peter Hurley
• [PATCH 3/3] serial: sirf: use hrtimer for data rx
  • From: Barry Song
• [PATCH 04/13] mmc: omap_hsmmc: No need to check DMA channel validity at module remove
  • From: Peter Ujfalusi
• [PATCH 01/13] dmaengine: of_dma: Correct return code for of_dma_request_slave_channel in case !CONFIG_OF
  • From: Peter Ujfalusi
• Re: [PATCH] serial: 8250: include <linux/serial_reg.h> from serial_8250.h
  • From: Peter Hurley
• [PATCH 05/13] mmc: omap_hsmmc: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Peter Ujfalusi
• [PATCH 1/3] serial: sirf: fix system hung on console log output
  • From: Barry Song
• [PATCH 07/13] mmc: davinci_mmc: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH 00/13] dmaengine + omap drivers: support fro deferred probing
  • From: Peter Ujfalusi
• [PATCH 09/13] crypto: omap-des - Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH 12/13] [media] omap3isp: Support for deferred probing when requesting DMA channel
  • From: Peter Ujfalusi
• [PATCH 10/13] crypto: omap-sham - Support for deferred probing when requesting DMA channel
  • From: Peter Ujfalusi
• [PATCH 11/13] spi: omap2-mcspi: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• Re: [PATCH] serial: core: don't set console cflag to zero
  • From: Peter Hurley
• [PATCH 08/13] crypto: omap-aes - Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH 13/13] ASoC: omap-pcm: Switch to use dma_request_slave_channel_compat_reason()
  • From: Peter Ujfalusi
• [PATCH 06/13] mmc: omap: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH 03/13] serial: 8250_dma: Support for deferred probing when requesting DMA channels
  • From: Peter Ujfalusi
• [PATCH] serial: 8250_dw: support ACPI platforms with integrated DMA engine
  • From: Heikki Krogerus
• [PATCH 2/3] serial: sirf: correct the fifo empty_bit
  • From: Barry Song
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Yegor Yefremov
• [PATCH] serial: 8250: include <linux/serial_reg.h> from serial_8250.h
  • From: Masahiro Yamada
• Re: [PATCH] serial: 8250: remove return statements from void function
  • From: Greg Kroah-Hartman
• Re: [PATCH 00/15] MIPS Malta DT Conversion
  • From: Paul Burton
• Re: [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: uart_start NULL pointer dereference
  • From: Jiri Slaby
• Re: [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Shevchenko, Andriy
• Re: [PATCH v6 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• Re: [PATCH 5/5] mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
  • From: Ulf Hansson
• Re: [PATCH 00/15] MIPS Malta DT Conversion
  • From: Rob Landley
• [PATCH v6 2/2] sc16is7xx: spi interface documentation
  • From: Rama Kiran Kumar Indrakanti
• [PATCH v6 1/2] sc16is7xx: spi interface is added
  • From: Rama Kiran Kumar Indrakanti
• RE: [PATCH v5 1/2] sc16is7xx: spi interface is added
  • From: Rama Kiran Kumar Indrakanti
• [PATCH v5 2/2] sc16is7xx: spi interface documentation
  • From: Rama Kiran Kumar Indrakanti
• [PATCH] serial: of_serial: check the return value of clk_prepare_enable()
  • From: Masahiro Yamada
• [PATCH] serial: of_serial: use devm_clk_get() instead of clk_get()
  • From: Masahiro Yamada
• [PATCH 1/1] serial: earlycon: Add support for big-endian MMIO accesses
  • From: Noam Camus
• [PATCH v6] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH v5] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• RE: [PATCH] serial: core: don't set console cflag to zero
  • From: Duan Andy
• Re: [PATCH] serial: 8250: remove return statements from void function
  • From: Masahiro Yamada
• Re: [PATCH 0/4] serial: sh-sci: Add DMA support to the DT binding
  • From: Simon Horman
• Re: [PATCH v9 2/5] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v9 1/5] dt-bindings: Document the STM32 timer bindings
  • From: Daniel Lezcano
• Re: [PATCH 1/1] serial: earlycon: Add support for big-endian MMIO accesses
  • From: Greg KH
• Re: [PATCH] serial: 8250: remove return statements from void function
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: core: don't set console cflag to zero
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH v5 34/37] serial: 8250_ingenic: support for Ingenic SoC UARTs
  • From: Paul Burton
• [PATCH v5 00/37] JZ4780 & CI20 support
  • From: Paul Burton
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH v5 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• [PATCH v4] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH v9 0/5] Add support to STMicroelectronics STM32 family
  • From: Maxime Coquelin
• [PATCH v9 2/5] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• [PATCH v9 3/5] dt-bindings: Document the STM32 USART bindings
  • From: Maxime Coquelin
• [PATCH v9 1/5] dt-bindings: Document the STM32 timer bindings
  • From: Maxime Coquelin
• [PATCH v9 4/5] serial: stm32-usart: Add STM32 USART Driver
  • From: Maxime Coquelin
• [PATCH v9 5/5] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  • From: Andreas Färber
• [PATCH v2] tty: remove platform_sysrq_reset_seq
  • From: Arnd Bergmann
• Re: [PATCH] tty: remove platform_sysrq_reset_seq
  • From: Arnd Bergmann
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Tony Lindgren
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Felipe Balbi
• Re: [PATCH] tty: remove platform_sysrq_reset_seq
  • From: Dmitry Torokhov
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Tony Lindgren
• Re: [PATCH REPOST] serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
  • From: Will Deacon
• [PATCH 08/15] of_serial: support for UARTs on I/O ports
  • From: Paul Burton
• [PATCH 00/15] MIPS Malta DT Conversion
  • From: Paul Burton
• Re: [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: Nishanth Menon
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Daniel Thompson
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Andreas Färber
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Maxime Coquelin
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v5 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Naresh Bhat
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Daniel Thompson
• [PATCH] tty: serial: omap: use mctrl_gpio helpers
  • From: yegorslists
• [PATCH v5 1/2] sc16is7xx: spi interface is added
  • From: Rama Kiran Kumar Indrakanti
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Andreas Färber
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Maxime Coquelin
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Andreas Färber
• Re: [PATCH v5 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Graeme Gregory
• Re: [PATCH v5 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Mark Langsdorf
• [PATCH v5 11/11] drivers: PL011: add ACPI probing for SBSA UART
  • From: Andre Przywara
• [PATCH v5 10/11] drivers: PL011: add support for the ARM SBSA generic UART
  • From: Andre Przywara
• [PATCH v5 09/11] drivers: PL011: allow to supply fixed option string
  • From: Andre Przywara
• [PATCH v5 08/11] drivers: PL011: allow avoiding UART enabling/disabling
  • From: Andre Przywara
• [PATCH v5 07/11] drivers: PL011: move cts_event workaround into separate function
  • From: Andre Przywara
• [PATCH v5 06/11] drivers: PL011: replace UART_MIS reading with _RIS & _IMSC
  • From: Andre Przywara
• [PATCH v5 05/11] drivers: PL011: refactor pl011_probe()
  • From: Andre Przywara
• [PATCH v5 04/11] drivers: PL011: refactor pl011_set_termios()
  • From: Andre Przywara
• [PATCH v5 03/11] drivers: PL011: refactor pl011_shutdown()
  • From: Andre Przywara
• [PATCH v5 02/11] drivers: PL011: refactor pl011_startup()
  • From: Andre Przywara
• [PATCH v5 01/11] drivers: PL011: avoid potential unregister_driver call
  • From: Andre Przywara
• [PATCH v5 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Andre Przywara
• [PATCH REPOST] serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
  • From: Dave Martin
• Re: [PATCH v4 10/11] drivers: PL011: add support for the ARM SBSA generic UART
  • From: Mark Langsdorf
• Re: [PATCH v4 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• RE: [PATCH v4 1/2] sc16is7xx: spi interface is added
  • From: ram kiran
• Re: [PATCH v4 10/11] drivers: PL011: add support for the ARM SBSA generic UART
  • From: Naresh Bhat
• Re: [PATCH v4 10/11] drivers: PL011: add support for the ARM SBSA generic UART
  • From: Andre Przywara
• Re: [PATCH v4 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• [PATCH] tty: remove platform_sysrq_reset_seq
  • From: Arnd Bergmann
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Maxime Coquelin
• Re: [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  • From: Maxime Coquelin
• Re: [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  • From: Michal Marek
• Re: [PATCH] serial: tegra: Fix memory leak on DMA setup failure
  • From: Alexandre Courbot
• RE: [PATCH] serial: core: don't set console cflag to zero
  • From: Duan Andy
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH v8 07/16] drivers: reset: Add STM32 reset driver
  • From: Andreas Färber
• Re: [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  • From: Andreas Färber
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• [PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Paul Bolle
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• [PATCH 1/4] serial: sh-sci: Add DMA support to the DT binding documentation
  • From: Geert Uytterhoeven
• [PATCH 4/4] ARM: shmobile: r8a7794 dtsi: Describe DMA for the serial ports
  • From: Geert Uytterhoeven
• [PATCH 3/4] ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial ports
  • From: Geert Uytterhoeven
• [PATCH 0/4] serial: sh-sci: Add DMA support to the DT binding
  • From: Geert Uytterhoeven
• [PATCH 2/4] ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports
  • From: Geert Uytterhoeven
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Andy Shevchenko
• [PATCH v4 2/2] sc16is7xx: spi interface documentation
  • From: Rama Kiran Kumar Indrakanti
• [PATCH v4 1/2] sc16is7xx: spi interface is added
  • From: Rama Kiran Kumar Indrakanti
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Jon Hunter
• Re: [PATCH] serial: tegra: Fix memory leak on DMA setup failure
  • From: Jon Hunter
• Re: [PATCH] serial: tegra: Fix memory leak on DMA setup failure
  • From: Jon Hunter
• [PATCH] serial: tegra: Fix memory leak on DMA setup failure
  • From: Jon Hunter
• Re: uart_start NULL pointer dereference
  • From: Peter Hurley
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Jon Hunter
• Re: [PATCH/RFC] serial: sh-sci: Add R-Car SCIF DMA receive support
  • From: Geert Uytterhoeven
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Paul Bolle
• Re: [PATCH v2] serial: sh-sci: Remove schedule_work in sci_dma_rx_complete
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] pinctrl: zynq: fix two bugs of zynq pinmux function
  • From: Masahiro Yamada
• [PATCH 1/2] pinctrl: zynq: fix DEFINE_ZYNQ_PINMUX_FUNCTION_MUX macro
  • From: Masahiro Yamada
• [PATCH 0/2] pinctrl: zynq: fix two bugs of zynq pinmux function
  • From: Masahiro Yamada
• [PATCH 2/2] pinctrl: zynq: fix offset address for {SD0,SD1}_WP_CD_SEL
  • From: Masahiro Yamada
• Re: [PATCH 1/5] PM / Runtime: Update last_busy in rpm_resume
  • From: Ulf Hansson
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Alexandre Courbot
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH] tty: serial/8250: remove console dependency for mediatek
  • From: Eddie Huang
• uart_start NULL pointer dereference
  • From: Elliott, Robert (Server Storage)
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Thomas Gleixner
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• [PATCH] serial: samsung: only use earlycon for console
  • From: Arnd Bergmann
• [PATCH] tty: serial/8250: remove console dependency for mediatek
  • From: Arnd Bergmann
• [PATCH v2] serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL
  • From: Uwe Kleine-König
• Re: [PATCH] serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL
  • From: Uwe Kleine-König
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Russell King - ARM Linux
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Arnd Bergmann
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH] serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL
  • From: Janusz Użycki
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Russell King - ARM Linux
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Thomas Gleixner
• Re: [PATCH v2] serial: imx: Revert "initialized DMA w/o HW flow enabled"
  • From: Fabio Estevam
• Re: [PATCH] serial: imx: Fix DMA handling for IDLE condition aborts
  • From: Fabio Estevam
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Arnd Bergmann
• Re: [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Paul Bolle
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Matthias Brugger
• Re: [PATCH v3 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• Re: [RFC PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Peter Hurley
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH] serial/amba-pl011: Fix mismerge between v4.1-rc4 and tty-next
  • From: Dave Martin
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Matthias Brugger
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: One Thousand Gnomes
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Jiri Slaby
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH] serial: imx: Fix DMA handling for IDLE condition aborts
  • From: Philipp Zabel
• Re: [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Matthias Brugger
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• [PATCH v3] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [RFC PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• [PATCH v3 2/2] arch/x86: remove pci uart early console from early_prink.c
  • From: Bin Gao
• [PATCH v3 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• [PATCH] serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL
  • From: Uwe Kleine-König
• [RFC PATCH] serial: 8250_omap: provide complete custom startup & shutdown callbacks
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Maxime Coquelin
• Re: [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver
  • From: Daniel Lezcano
• Re: [PATCH v8 04/16] clocksource/drivers: Add ARM System timer driver
  • From: Maxime Coquelin
• Re: [PATCH v8 04/16] clocksource/drivers: Add ARM System timer driver
  • From: Daniel Lezcano
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v8 04/16] clocksource/drivers: Add ARM System timer driver
  • From: Maxime Coquelin
• Re: [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  • From: Maxime Coquelin
• Re: [PATCH] Fix calculation of size in canon_copy_from_read_buf
  • From: Peter Hurley
• Re: [PATCH v2] serial: 8250_uniphier: add UniPhier serial driver
  • From: Matthias Brugger
• [PATCH v2] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• [PATCH] Fix calculation of size in canon_copy_from_read_buf
  • From: Mark Tomlinson
• [PATCH v2] serial: sh-sci: Remove schedule_work in sci_dma_rx_complete
  • From: Yoshihiro Kaneko
• Re: [PATCH/RFC] serial: sh-sci: Remove schedule_work in sci_dma_rx_complete
  • From: Yoshihiro Kaneko
• Re: [PATCH v3 1/2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• [GIT PULL] TTY/Serial fixes for 4.1-rc4
  • From: Greg KH
• [PATCH 1/1] serial: earlycon: Add support for big-endian MMIO accesses
  • From: Noam Camus
• Re: [PATCH] Fix calculation of size in canon_copy_from_read_buf
  • From: Peter Hurley
• Re: [PATCH] serial: 8250_uniphier: add UniPhier serial driver
  • From: Matthias Brugger
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• Re: [PATCH] serial: 8250_uniphier: add UniPhier serial driver
  • From: Joachim Eastwood
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH v8 15/16] ARM: configs: Add STM32 defconfig
  • From: Arnd Bergmann
• Re: [PATCH v8 13/16] ARM: dts: Add ARM System timer as clocksource in armv7m
  • From: Arnd Bergmann
• Re: [PATCH v8 16/16] MAINTAINERS: Add entry for STM32 MCUs
  • From: Arnd Bergmann
• Re: [PATCH v8 12/16] ARM: Add STM32 family machine
  • From: Arnd Bergmann
• [PATCH 2/2] doc: dt: add documentation for nxp,lpc1850-uart
  • From: Joachim Eastwood
• [PATCH 1/2] serial: 8250: add LPC18xx/43xx UART driver
  • From: Joachim Eastwood
• [PATCH 0/2] 8250 UART driver for NXP LPC18xx family
  • From: Joachim Eastwood
• Re: [PATCH v3 2/2] sc16is7xx: spi interface documentation
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3 2/2] sc16is7xx: spi interface documentation
  • From: Greg KH
• Re: [PATCH v3 1/2] sc16is7xx: spi interface is added
  • From: Greg KH
• [PATCH] serial: 8250_uniphier: add UniPhier serial driver
  • From: Masahiro Yamada
• Re: [PATCH v2 1/2] serial_core: add pci uart early console support
  • From: One Thousand Gnomes
• RE: [PATCH v3 2/2] sc16is7xx: spi interface documentation
  • From: ram kiran
• RE: [PATCH v3 1/2] sc16is7xx: spi interface is added
  • From: ram kiran
• [PATCH v2 2/2] arch/x86: remove pci uart early console from early_prink.c
  • From: Bin Gao
• [PATCH v2 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH v4 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Hanjun Guo
• [PATCH] Fix calculation of size in canon_copy_from_read_buf
  • From: Mark Tomlinson
• Re: [PATCH 2/2] arch/x86: remove pci uart early console from early_prink.c
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] serial_core: add pci uart early console support
  • From: Greg Kroah-Hartman
• [PATCH 2/2] arch/x86: remove pci uart early console from early_prink.c
  • From: Bin Gao
• [PATCH 1/2] serial_core: add pci uart early console support
  • From: Bin Gao
• Re: serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Rafael J. Wysocki
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Daniel Thompson
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Alan Stern
• Re: [PATCH/RFC] serial: sh-sci: Add R-Car SCIF DMA receive support
  • From: Wolfram Sang
• Re: [PATCH v2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• Re: [PATCH v2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• RE: [PATCH v2] sc16is7xx: spi interface is added
  • From: ram kiran
• Re: [PATCH v2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• RE: [PATCH v2] sc16is7xx: spi interface is added
  • From: ram kiran
• [PATCH 6/6] serial: sirf: assign console default index if users not set a valid one
  • From: Barry Song
• [PATCH 5/6] serial: sirf: add serial loopback function support
  • From: Barry Song
• [PATCH 4/6] serial: sirf: add uart receive's some error counter and mark
  • From: Barry Song
• [PATCH 3/6] serial: sirf: fix endless loop bug in uart receive tasklet
  • From: Barry Song
• [PATCH 2/6] serial: sirf: fix the issue that HW flow control doesn't work for BT
  • From: Barry Song
• [PATCH 1/6] serial: sirf: enable ATLAS7 USP serial support
  • From: Barry Song
• Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Felipe Balbi
• [PATCH 1/5] PM / Runtime: Update last_busy in rpm_resume
  • From: Tony Lindgren
• [PATCH 3/5] serial: omap: Switch wake-up interrupt to generic wakeirq
  • From: Tony Lindgren
• [PATCH 4/5] serial: 8250_omap: Move wake-up interrupt to generic wakeirq
  • From: Tony Lindgren
• [PATCH 5/5] mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq
  • From: Tony Lindgren
• [PATCHv3 0/5] Linux generic wakeirq handling
  • From: Tony Lindgren
• [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling
  • From: Tony Lindgren
• Re: serial_core: add pci uart early console support
  • From: One Thousand Gnomes
• [no subject]
  • From: Noam Camus
• [PATCH 1/1] serial: earlycon: Add support for big-endian MMIO accesses
  • From: Noam Camus
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Daniel Thompson
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• serial_core: add pci uart early console support
  • From: Bin Gao
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• RE: [PATCH v2] sc16is7xx: spi interface is added
  • From: ram kiran
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Daniel Thompson
• RE: [PATCH v2] sc16is7xx: spi interface is added
  • From: ram kiran
• Re: [PATCH v2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• Re: [PATCH v2] sc16is7xx: spi interface is added
  • From: Jakub Kiciński
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Maxime Coquelin
• RE: [PATCH v2] sc16is7xx: spi interface is added
  • From: ram kiran
• Re: [PATCH/RFC] serial: sh-sci: Add R-Car SCIF DMA receive support
  • From: Geert Uytterhoeven
• Re: [PATCH v4 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Lorenzo Pieralisi
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Jon Hunter
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Alexandre Courbot
• Re: [PATCH v4 11/11] drivers: PL011: add ACPI probing for SBSA UART
  • From: Hanjun Guo
• Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU
  • From: Arnd Bergmann
• Re: [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"
  • From: Tony Lindgren
• Re: [PATCH v4 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Robert Richter
• Re: [PATCH v4 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Jakub Kiciński
• Re: [PATCH] serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
  • From: Dave P Martin
• [PATCH v4 11/11] drivers: PL011: add ACPI probing for SBSA UART
  • From: Andre Przywara
• [PATCH v4 10/11] drivers: PL011: add support for the ARM SBSA generic UART
  • From: Andre Przywara
• [PATCH v4 09/11] drivers: PL011: allow to supply fixed option string
  • From: Andre Przywara
• [PATCH v4 08/11] drivers: PL011: allow avoiding UART enabling/disabling
  • From: Andre Przywara
• [PATCH v4 07/11] drivers: PL011: move cts_event workaround into separate function
  • From: Andre Przywara
• [PATCH v4 06/11] drivers: PL011: replace UART_MIS reading with _RIS & _IMSC
  • From: Andre Przywara
• [PATCH v4 05/11] drivers: PL011: refactor pl011_probe()
  • From: Andre Przywara
• [PATCH v4 04/11] drivers: PL011: refactor pl011_set_termios()
  • From: Andre Przywara
• [PATCH v4 03/11] drivers: PL011: refactor pl011_shutdown()
  • From: Andre Przywara
• [PATCH v4 02/11] drivers: PL011: refactor pl011_startup()
  • From: Andre Przywara
• [PATCH v4 01/11] drivers: PL011: avoid potential unregister_driver call
  • From: Andre Przywara
• [PATCH v4 00/11] drivers: PL011: add ARM SBSA Generic UART support
  • From: Andre Przywara
• Re: [PATCH] serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
  • From: Jakub Kiciński
• [PATCH] serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
  • From: Dave Martin
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Jon Hunter
• Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
  • From: Alexandre Courbot
• Re: [PATCH v9 0/3] Support uart pl011 on ZTE SOC
  • From: Jun Nie
• Re: [PATCH v4 REPOST] Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
  • From: Andre Przywara
• [PATCH] tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send
  • From: Nicolas Ferre
• RE: [PATCH] sc16is7xx: spi interface is added.
  • From: ram kiran
• Re: [PATCH] sc16is7xx: spi interface is added.
  • From: Jakub Kiciński
• RE: [PATCH] sc16is7xx: spi interface is added.
  • From: ram kiran
• Clarification, linux serial emails give delivery failure
  • From: Rama kiran kumar Indrakanti
• [PATCH] serial: 8250: remove return statements from void function
  • From: Masahiro Yamada
• [PATCH] tty: rocket: fix comment of ROCKET_SPD_HI
  • From: Masahiro Yamada
• [PATCH] tty: fix comment of ASYNCB_SPD_HI
  • From: Masahiro Yamada