From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> Sent: Tuesday, May 26, 2015 9:27 PM > To: Duan Fugang-B38611; gregkh@xxxxxxxxxxxxxxxxxxx > Cc: linux-serial@xxxxxxxxxxxxxxx > Subject: Re: [PATCH] serial: core: don't set console cflag to zero > > On 05/04/2015 03:56 AM, Fugang Duan wrote: > > From: "Fugang Duan" <B38611@xxxxxxxxxxxxx> > > > > In android without shell environment (androidboot.selinux enable), do > > suspend/resume test, console terminal has no message print out. The > > issue is reproduced at i.MX serial platforms like i.MX6Q/DL/SX. > > > > In common code, cons->cflag is cleared to zero in > > .uart_port_startup(), but after resume back, use the cons->cflag to set > termios. > > ...................... > > uart_port_startup-> > > uport->cons->cflag = 0; > > > > uart_resume_port()-> > > termios.c_cflga = uport->cons->cflag; > > ... > > uport->ops->set_termios(uport, &termios, NULL); > > ...................... > > > > If the console baud rate is 115200 bps, after Android resume back, the > > console baud rate is initialized to 9600 bps. So the patch save the > console cflag. > > > > Signed-off-by: Fugang Duan <B38611@xxxxxxxxxxxxx> > > --- > > drivers/tty/serial/serial_core.c | 5 ++--- > > 1 files changed, 2 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/tty/serial/serial_core.c > > b/drivers/tty/serial/serial_core.c > > index 0b7bb12..4b21091 100644 > > --- a/drivers/tty/serial/serial_core.c > > +++ b/drivers/tty/serial/serial_core.c > > @@ -162,10 +162,9 @@ static int uart_port_startup(struct tty_struct > > *tty, struct uart_state *state, > > > > retval = uport->ops->startup(uport); > > if (retval == 0) { > > - if (uart_console(uport) && uport->cons->cflag) { > > + if (uart_console(uport) && uport->cons->cflag) > > tty->termios.c_cflag = uport->cons->cflag; > > - uport->cons->cflag = 0; > > NAK. Please fix your userspace, which is opening the serial port used by > the console with incompatible line settings. > > Regards, > Peter Hurley In Android with shell environment, and there have no app to open the serial port, how to fix it in userspace ? > > > - } > > + > > /* > > * Initialise the hardware port settings. > > */ > > ��.n��������+%������w��{.n�����{��ǫ����{ay�ʇڙ���f���h������_�(�階�ݢj"��������G����?���&��