On 05/04/2015 03:56 AM, Fugang Duan wrote:
> From: "Fugang Duan" <B38611@xxxxxxxxxxxxx>
>
> In android without shell environment (androidboot.selinux enable), do suspend/resume
> test, console terminal has no message print out. The issue is reproduced at i.MX serial
> platforms like i.MX6Q/DL/SX.
>
> In common code, cons->cflag is cleared to zero in .uart_port_startup(), but
> after resume back, use the cons->cflag to set termios.
> ......................
> uart_port_startup->
> uport->cons->cflag = 0;
>
> uart_resume_port()->
> termios.c_cflga = uport->cons->cflag;
> ...
> uport->ops->set_termios(uport, &termios, NULL);
> ......................
>
> If the console baud rate is 115200 bps, after Android resume back, the console
> baud rate is initialized to 9600 bps. So the patch save the console cflag.
>
> Signed-off-by: Fugang Duan <B38611@xxxxxxxxxxxxx>
> ---
> drivers/tty/serial/serial_core.c | 5 ++---
> 1 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index 0b7bb12..4b21091 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -162,10 +162,9 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
>
> retval = uport->ops->startup(uport);
> if (retval == 0) {
> - if (uart_console(uport) && uport->cons->cflag) {
> + if (uart_console(uport) && uport->cons->cflag)
> tty->termios.c_cflag = uport->cons->cflag;
> - uport->cons->cflag = 0;
NAK. Please fix your userspace, which is opening the serial port
used by the console with incompatible line settings.
Regards,
Peter Hurley
> - }
> +
> /*
> * Initialise the hardware port settings.
> */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
