Split the pl011_startup() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 48 ++++++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b4de23c..209aeb6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1556,6 +1556,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
}
}
+static int pl011_allocate_irq(struct uart_amba_port *uap)
+{
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+}
+
+/*
+ * Enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
+ */
+static void pl011_enable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* Clear out any spuriously appearing RX interrupts */
+ writew(UART011_RTIS | UART011_RXIS,
+ uap->port.membase + UART011_ICR);
+ uap->im = UART011_RTIM;
+ if (!pl011_dma_rx_running(uap))
+ uap->im |= UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ spin_unlock_irq(&uap->port.lock);
+}
+
static int pl011_startup(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1567,12 +1593,7 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(uap->im, uap->port.membase + UART011_IMSC);
-
- /*
- * Allocate the IRQ
- */
- retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ retval = pl011_allocate_irq(uap);
if (retval)
goto clk_dis;
@@ -1595,20 +1616,7 @@ static int pl011_startup(struct uart_port *port)
/* Startup DMA */
pl011_dma_startup(uap);
- /*
- * Finally, enable interrupts, only timeouts when using DMA
- * if initial RX DMA job failed, start in interrupt mode
- * as well.
- */
- spin_lock_irq(&uap->port.lock);
- /* Clear out any spuriously appearing RX interrupts */
- writew(UART011_RTIS | UART011_RXIS,
- uap->port.membase + UART011_ICR);
- uap->im = UART011_RTIM;
- if (!pl011_dma_rx_running(uap))
- uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- spin_unlock_irq(&uap->port.lock);
+ pl011_enable_interrupts(uap);
return 0;
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
