Split the pl011_shutdown() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 57 +++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 25 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 209aeb6..a43039d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1635,34 +1635,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
writew(val, uap->port.membase + lcrh);
}
-static void pl011_shutdown(struct uart_port *port)
+/*
+ * disable the port. It should not disable RTS and DTR.
+ * Also RTS and DTR state should be preserved to restore
+ * it during startup().
+ */
+static void pl011_disable_uart(struct uart_amba_port *uap)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int cr;
- /*
- * disable all interrupts
- */
- spin_lock_irq(&uap->port.lock);
- uap->im = 0;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
- spin_unlock_irq(&uap->port.lock);
-
- pl011_dma_shutdown(uap);
-
- /*
- * Free the interrupt
- */
- free_irq(uap->port.irq, uap);
-
- /*
- * disable the port
- * disable the port. It should not disable RTS and DTR.
- * Also RTS and DTR state should be preserved to restore
- * it during startup().
- */
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
@@ -1678,6 +1659,32 @@ static void pl011_shutdown(struct uart_port *port)
pl011_shutdown_channel(uap, uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx)
pl011_shutdown_channel(uap, uap->lcrh_tx);
+}
+
+static void pl011_disable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* mask all interrupts and clear all pending ones */
+ uap->im = 0;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
+ spin_unlock_irq(&uap->port.lock);
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
+ pl011_disable_interrupts(uap);
+
+ pl011_dma_shutdown(uap);
+
+ free_irq(uap->port.irq, uap);
+
+ pl011_disable_uart(uap);
/*
* Shut down the clock producer
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
