[ + Arnd who has been reviewing/acking of_serial.c changes ]
On 05/22/2015 11:51 AM, Paul Burton wrote:
> If the address provided for the UART is of an I/O port rather than
> a regular memory address, then set the port iotype appropriately and
> write the address to iobase rather than mapbase.
>
> Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
> ---
>
> drivers/tty/serial/of_serial.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
> index 137381e..ccff9ba 100644
> --- a/drivers/tty/serial/of_serial.c
> +++ b/drivers/tty/serial/of_serial.c
> @@ -110,7 +110,12 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
>
> port->irq = irq_of_parse_and_map(np, 0);
> port->iotype = UPIO_MEM;
> - if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> +
> + if (resource.flags & IORESOURCE_IO) {
> + port->iotype = UPIO_PORT;
> + port->iobase = port->mapbase;
> + port->mapbase = 0;
> + } else if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> switch (prop) {
> case 1:
> port->iotype = UPIO_MEM;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
