Linux Serial

• Thread Index

• [PATCH v2 01/11] serial: mvebu-uart: fix calculation of clock divisor
  • From: Pali Rohár
• [PATCH v2 00/11] serial: mvebu-uart: Fixes and new support for higher baudrates
  • From: Pali Rohár
• Re: [PATCH] dt-bindings: spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
  • From: Mark Brown
• [tty:tty-testing 96/222] drivers/tty/serial/max310x.c:1430 max310x_probe() warn: 's->clk' not released on lines: 1296.
  • From: Dan Carpenter
• Re: [PATCH v2] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• Re: [PATCH] SUNIX SDC serial port driver
  • From: Greg KH
• Re: [PATCH] SUNIX SDC serial port driver
  • From: Greg KH
• Re: [PATCH] SUNIX SDC serial port driver
  • From: Greg KH
• [PATCH] SUNIX SDC serial port driver
  • From: Moriis Ku
• [PATCH] SUNIX SDC serial port driver
  • From: Moriis Ku
• [PATCH] SUNIX SDC serial port driver
  • From: Moriis Ku
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Saubhik Mukherjee
• [PATCH] tty: make linux/tty_flip.h self-contained
  • From: Jiri Slaby
• Re: [PATCH v2] serial: amba-pl011: add RS485 support
  • From: Jiri Slaby
• [tty:tty-next] BUILD SUCCESS cddd53e8aa4fc442e26a7a7be183593ce31453ca
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS WITH WARNING 5607fa6c3da3189de1bac356c73bc4fcaf4c0234
  • From: kernel test robot
• Re: [PATCH v2] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• [PATCH 10/10] serial: mvebu-uart: implement support for baudrates higher than 230400
  • From: Pali Rohár
• [PATCH 09/10] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
  • From: Pali Rohár
• [PATCH 08/10] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Pali Rohár
• [PATCH 07/10] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
  • From: Pali Rohár
• [PATCH 06/10] serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  • From: Pali Rohár
• [PATCH 05/10] arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  • From: Pali Rohár
• [PATCH 04/10] dt-bindings: mvebu-uart: fix documentation
  • From: Pali Rohár
• [PATCH 02/10] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  • From: Pali Rohár
• [PATCH 03/10] serial: mvebu-uart: correctly calculate minimal possible baudrate
  • From: Pali Rohár
• [PATCH 01/10] serial: mvebu-uart: fix calculation of clock divisor
  • From: Pali Rohár
• [PATCH 00/10] serial: mvebu-uart: Fixes and new support for higher baudrates
  • From: Pali Rohár
• Re: [PATCH] dt-bindings: spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
  • From: Rob Herring
• Re: [question] De-registration does not remove port
  • From: Greg KH
• Re: [question] De-registration does not remove port
  • From: Saubhik Mukherjee
• Re: [PATCH v2] serial: amba-pl011: add RS485 support
  • From: Greg KH
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Johan Hovold
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Saubhik Mukherjee
• RE: [PATCH v3] serial: samsung: use dma_ops of DMA if attached
  • From: M Tamseel Shams
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Johan Hovold
• Re: [question] De-registration does not remove port
  • From: Greg KH
• [question] De-registration does not remove port
  • From: Saubhik Mukherjee
• Re: [PATCH v3] serial: samsung: use dma_ops of DMA if attached
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Saubhik Mukherjee
• RE: [PATCH v2] serial: samsung: use dma_ops of DMA if attached
  • From: M Tamseel Shams
• [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: cl
• Re: [PATCH v2] serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  • From: Jan Kiszka
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Arnd Bergmann
• [PATCH v2] serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  • From: Vignesh Raghavendra
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Alex Nemirovsky
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• Re: [PATCH v2] serial: samsung: use dma_ops of DMA if attached
  • From: Robin Murphy
• [PATCH v3] serial: samsung: use dma_ops of DMA if attached
  • From: Tamseel Shams
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Geert Uytterhoeven
• Re: [PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Heiko Stübner
• Re: [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: Heiko Stübner
• Re: [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: Johan Jonker
• Re: (subset) [PATCH v5 0/4] arm64: dts: rockchip: add basic dtsi/dts files for RK3568 SoC
  • From: Heiko Stuebner
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Geert Uytterhoeven
• RE: [PATCH] serial: samsung: use dma_ops of DMA if attached
  • From: M Tamseel Shams
• RE: [PATCH v2] serial: samsung: use dma_ops of DMA if attached
  • From: M Tamseel Shams
• Re: [PATCH] serial: samsung: use dma_ops of DMA if attached
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Vignesh Raghavendra
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Jan Kiszka
• Re: [PATCH v2] serial: samsung: use dma_ops of DMA if attached
  • From: Greg KH
• [PATCH v2] serial: samsung: use dma_ops of DMA if attached
  • From: Tamseel Shams
• [PATCH v5 4/4] arm64: dts: rockchip: add basic dts for RK3568 EVB
  • From: cl
• [PATCH v5 2/4] arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
  • From: cl
• [PATCH v5 0/4] arm64: dts: rockchip: add basic dtsi/dts files for RK3568 SoC
  • From: cl
• [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: cl
• [PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: cl
• Re: [PATCH] serial: qcom_geni_serial: use DT aliases according to DT bindings
  • From: Bjorn Andersson
• [PATCH] serial: qcom_geni_serial: use DT aliases according to DT bindings
  • From: Dmitry Baryshkov
• RE: [PATCH] serial: samsung: use dma_ops of DMA if attached
  • From: M Tamseel Shams
• Re: [PATCH] serial: samsung: use dma_ops of DMA if attached
  • From: Krzysztof Kozlowski
• Re: [PATCH v3] lockdown,selinux: fix wrong subject in some SELinux lockdown checks
  • From: Steffen Klassert
• [tty:tty-next 218/218] drivers/tty/serial/serial_cortina-access.c:76:26: sparse: sparse: symbol 'cortina_uart_get_port' was not declared. Should it be static?
  • From: kernel test robot
• RE: [PATCH v4] serial: samsung: change to platform_get_irq_optional
  • From: M Tamseel Shams
• [PATCH v4] serial: samsung: change to platform_get_irq_optional
  • From: Tamseel Shams
• [PATCH] serial: samsung: use dma_ops of DMA if attached
  • From: Tamseel Shams
• Re: [tty:tty-testing 218/218] drivers/tty/serial/serial_cortina-access.c:469:6: warning: no previous prototype for 'cortina_console_write'
  • From: Greg Kroah-Hartman
• RE: [tty:tty-testing 218/218] drivers/tty/serial/serial_cortina-access.c:469:6: warning: no previous prototype for 'cortina_console_write'
  • From: Jason Li
• Re: [PATCH v3] lockdown,selinux: fix wrong subject in some SELinux lockdown checks
  • From: Thomas Gleixner
• [tty:tty-testing] BUILD SUCCESS WITH WARNING b61c8bf4694b5115766849378dcb8787ff54e65e
  • From: kernel test robot
• Re: [PATCH v3] lockdown,selinux: fix wrong subject in some SELinux lockdown checks
  • From: Dan Williams
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring
• [tty:tty-testing 218/218] drivers/tty/serial/serial_cortina-access.c:469:6: warning: no previous prototype for 'cortina_console_write'
  • From: kernel test robot
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring
• [PATCH v2] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• [tty:tty-testing 218/218] drivers/tty/serial/serial_cortina-access.c:76:27: warning: no previous prototype for 'cortina_uart_get_port'
  • From: kernel test robot
• Re: [PATCH 00/69] mxser: cleanup
  • From: Greg KH
• Re: [PATCH v3] tty: serial: jsm: allocate queue buffer at probe time
  • From: Greg KH
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Arnaud POULIQUEN
• Re: [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: Heiko Stübner
• [PATCH 68/70] mxser: Documentation, make the docs up-to-date
  • From: Jiri Slaby
• [PATCH 70/70] MAINTAINERS: add me back as mxser maintainer
  • From: Jiri Slaby
• [PATCH 69/70] mxser: Documentation, fix typos
  • From: Jiri Slaby
• [PATCH 66/70] mxser: introduce mxser_16550A_or_MUST helper
  • From: Jiri Slaby
• [PATCH 65/70] mxser: rename flags to old_speed in mxser_set_serial_info
  • From: Jiri Slaby
• [PATCH 64/70] mxser: use port variable in mxser_set_serial_info
  • From: Jiri Slaby
• [PATCH 63/70] mxser: access info->MCR under info->slock
  • From: Jiri Slaby
• [PATCH 61/70] mxser: decrypt FCR values
  • From: Jiri Slaby
• [PATCH 67/70] mxser: Documentation, remove traces of callout device
  • From: Jiri Slaby
• [PATCH 62/70] mxser: fix typos around enhanced mode
  • From: Jiri Slaby
• [PATCH 53/70] mxser: alloc only needed # of ports
  • From: Jiri Slaby
• [PATCH 55/70] mxser: cleanup mxser_rs_break
  • From: Jiri Slaby
• [PATCH 60/70] mxser: remove xmit_cnt < 0 tests
  • From: Jiri Slaby
• [PATCH 51/70] mxser: make mxser_board::idx really an index
  • From: Jiri Slaby
• [PATCH 59/70] mxser: introduce and use start/stop_tx helpers
  • From: Jiri Slaby
• [PATCH 44/70] mxser: inline mxser_board_remove into mxser_remove
  • From: Jiri Slaby
• [PATCH 50/70] mxser: rework and simplify mxser_open
  • From: Jiri Slaby
• [PATCH 45/70] mxser: pci, switch to managed resources
  • From: Jiri Slaby
• [PATCH 58/70] mxser: extract and dedup CTS handling
  • From: Jiri Slaby
• [PATCH 54/70] mxser: remove pointless ioaddr checks
  • From: Jiri Slaby
• [PATCH 48/70] mxser: remove mxser_cardinfo
  • From: Jiri Slaby
• [PATCH 39/70] mxser: simplify mxser_ioctl_op_mode
  • From: Jiri Slaby
• [PATCH 57/70] mxser: don't start TX from tty_operations::put_char
  • From: Jiri Slaby
• [PATCH 52/70] mxser: alloc struct mxser_board dynamically
  • From: Jiri Slaby
• [PATCH 56/70] mxser: cleanup mxser_dtr_rts
  • From: Jiri Slaby
• [PATCH 47/70] mxser: remove info message from probe
  • From: Jiri Slaby
• [PATCH 46/70] mxser: move request irq to probe and switch to managed
  • From: Jiri Slaby
• [PATCH 49/70] mxser: cleanup mxser_process_txrx_fifo
  • From: Jiri Slaby
• [PATCH 43/70] mxser: move board init into mxser_initbrd
  • From: Jiri Slaby
• [PATCH 42/70] mxser: clean up the rest of MUST helpers
  • From: Jiri Slaby
• [PATCH 37/70] mxser: cleanup mxser_change_speed
  • From: Jiri Slaby
• [PATCH 38/70] mxser: extract mxser_ioctl_op_mode
  • From: Jiri Slaby
• [PATCH 41/70] mxser: introduce mxser_must_select_bank and use it
  • From: Jiri Slaby
• [PATCH 40/70] mxser: dedup mxser_must_set_enhance_mode
  • From: Jiri Slaby
• [PATCH 36/70] mxser: drop mxser_port::custom_divisor
  • From: Jiri Slaby
• [PATCH 33/70] mxser: drop unused mxser_port::normal_termios
  • From: Jiri Slaby
• [PATCH 34/70] mxser: remove unused mxser_port::stop_rx
  • From: Jiri Slaby
• [PATCH 35/70] mxser: drop mxser_port::baud_base
  • From: Jiri Slaby
• [PATCH 31/70] mxser: remove cnt from mxser_receive_chars
  • From: Jiri Slaby
• [PATCH 32/70] mxser: don't allocate MXSER_PORTS + 1
  • From: Jiri Slaby
• [PATCH 29/70] mxser: remove MOXA_ASPP_OQUEUE ioctl
  • From: Jiri Slaby
• [PATCH 21/70] mxser: drop unused MOXA_DIAGNOSE macro
  • From: Jiri Slaby
• [PATCH 30/70] mxser: remove MOXA_HighSpeedOn ioctl
  • From: Jiri Slaby
• [PATCH 26/70] mxser: remove MOXA_CHKPORTENABLE ioctl
  • From: Jiri Slaby
• [PATCH 28/70] mxser: remove MOXA_GETMSTATUS ioctl
  • From: Jiri Slaby
• [PATCH 27/70] mxser: remove MOXA_GETDATACOUNT ioctl
  • From: Jiri Slaby
• [PATCH 25/70] mxser: remove MOXA_ASPP_LSTATUS ioctl
  • From: Jiri Slaby
• [PATCH 22/70] mxser: remove MOXA_GET_MAJOR deprecated ioctl
  • From: Jiri Slaby
• [PATCH 19/70] mxser: make xmit ring buffer variables unsigned
  • From: Jiri Slaby
• [PATCH 18/70] mxser: correct types for uart variables
  • From: Jiri Slaby
• [PATCH 23/70] mxser: remove MOXA_SET_BAUD_METHOD ioctl
  • From: Jiri Slaby
• [PATCH 20/70] mxser: drop UART_MCR_AFE and UART_LSR_SPECIAL defines
  • From: Jiri Slaby
• [PATCH 16/70] mxser: extract mxser_receive_chars_old
  • From: Jiri Slaby
• [PATCH 24/70] mxser: remove MOXA_ASPP_MON and friends
  • From: Jiri Slaby
• [PATCH 15/70] mxser: extract mxser_receive_chars_new
  • From: Jiri Slaby
• [PATCH 14/70] mxser: simplify mxser_interrupt and drop mxser_board::vector_mask
  • From: Jiri Slaby
• [PATCH 17/70] mxser: remove else from LSR bits checks
  • From: Jiri Slaby
• [PATCH 13/70] mxser: extract port ISR
  • From: Jiri Slaby
• [PATCH 12/70] mxser: cleanup LSR handling in mxser_receive_chars
  • From: Jiri Slaby
• [PATCH 11/70] mxser: remove nonsense from ISR
  • From: Jiri Slaby
• [PATCH 10/70] mxser: move max_baud from port to board
  • From: Jiri Slaby
• [PATCH 08/70] mxser: introduce enum mxser_must_hwid
  • From: Jiri Slaby
• [PATCH 06/70] mxser: rename CheckIsMoxaMust to mxser_get_must_hwid
  • From: Jiri Slaby
• [PATCH 09/70] mxser: drop constant board::uart_type
  • From: Jiri Slaby
• [PATCH 07/70] mxser: rename mxser_board::chip_flag to must_hwid
  • From: Jiri Slaby
• [PATCH 05/70] mxser: cleanup Gpci_uart_info struct
  • From: Jiri Slaby
• [PATCH 04/70] mxser: integrate mxser.h into .c
  • From: Jiri Slaby
• [PATCH 03/70] mxser: remove info printout from init
  • From: Jiri Slaby
• [PATCH 01/70] mxser: drop ISA support
  • From: Jiri Slaby
• [PATCH 02/70] mxser: renumber mxser_cards
  • From: Jiri Slaby
• [PATCH 00/69] mxser: cleanup
  • From: Jiri Slaby
• Re: [PATCH v3] lockdown,selinux: fix wrong subject in some SELinux lockdown checks
  • From: Paul Moore
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• Re: [PATCH] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• Re: [PATCH] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Suman Anna
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jassi Brar
• Re: [PATCH 3/4] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: kernel test robot
• Re: [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Greg KH
• [PATCH] tty: serial: owl: Fix data race in owl_uart_remove
  • From: Saubhik Mukherjee
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Ulf Hansson
• Re: [PATCH 3/4] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS d495dd743d5ecd47288156e25c4d9163294a0992
  • From: kernel test robot
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Wolfram Sang
• Re: [PATCH 3/4] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: kernel test robot
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jonathan Cameron
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Mark Brown
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Philipp Zabel
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Marc Kleine-Budde
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Vinod Koul
• [PATCH v3] lockdown,selinux: fix wrong subject in some SELinux lockdown checks
  • From: Ondrej Mosnacek
• Re: [PATCH] serial: amba-pl011: add RS485 support
  • From: Greg KH
• Re: [PATCH] serial: amba-pl011: add RS485 support
  • From: Jiri Slaby
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Greg Kroah-Hartman
• [PATCH v3] tty: serial: jsm: allocate queue buffer at probe time
  • From: Zheyu Ma
• [tty:tty-testing] BUILD SUCCESS 674b5396576b636a1ff101f692935748388c7325
  • From: kernel test robot
• RE: [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: David Laight
• [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Alex Nemirovsky
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Alex Nemirovsky
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Maciej W. Rozycki
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Rob Herring
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Alex Nemirovsky
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Alex Nemirovsky
• Re: [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Rob Herring
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Alex Nemirovsky
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Alex Nemirovsky
• Re: [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Maciej W. Rozycki
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Alex Nemirovsky
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Alex Nemirovsky
• Re: [PATCH 4/5] serial: core, 8250: Add a hook for extra port property reporting
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] dt-bindings: serial: Convert Cortina-Access UART to json-schema
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: serial: Add UART driver for Cortina-Access platform
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS 99289bf1a76c0aea6ac0f77335b8c9bdca16aac7
  • From: kernel test robot
• Re: [PATCH] dt-bindings: serial: convert Cadence UART bindings to YAML
  • From: Rob Herring
• Re: [PATCH] dt-bindings: serial: convert Cadence UART bindings to YAML
  • From: Rob Herring
• Re: [question] Is it possible to remove an active port (without shutdown)?
  • From: Greg KH
• Re: [question] Is it possible to remove an active port (without shutdown)?
  • From: Saubhik Mukherjee
• [PATCH] dt-bindings: spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
  • From: Nobuhiro Iwamatsu
• [PATCH] dt-bindings: serial: convert Cadence UART bindings to YAML
  • From: Nobuhiro Iwamatsu
• Re: [GIT PULL] TTY/Serial driver fix for 5.13-rc6
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial driver fix for 5.13-rc6
  • From: Greg KH
• [PATCH 2/2] serial_cs: Add Option International GSM-Ready 56K/ISDN modem
  • From: Ondrej Zary
• [PATCH 1/2] serial_cs: remove wrong GLOBETROTTER.cis entry
  • From: Ondrej Zary
• Re: [PATCH 1/2] serial: 8250: Mask out floating 16/32-bit bus bits
  • From: Philippe Mathieu-Daudé
• Re: [question] Is it possible to remove an active port (without shutdown)?
  • From: Greg KH
• [question] Is it possible to remove an active port (without shutdown)?
  • From: Saubhik Mukherjee
• Re: [PATCH 1/2] serial: 8250: Mask out floating 16/32-bit bus bits
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] serial: 8250: Mask out floating 16/32-bit bus bits
  • From: Jiri Slaby
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren
• [PATCH 4/4] serial: 8250: Define RX trigger levels for OxSemi 950 devices
  • From: Maciej W. Rozycki
• [PATCH 3/4] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: Maciej W. Rozycki
• [PATCH 2/4] serial: 8250: Correct the clock for OxSemi PCIe devices
  • From: Maciej W. Rozycki
• [PATCH 1/4] serial: 8250: Dissociate 4MHz Titan ports from Oxford ports
  • From: Maciej W. Rozycki
• [PATCH 0/4] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Maciej W. Rozycki
• [PATCH 5/5] MIPS: Malta: Enable magic multipliers for Super I/O UARTs
  • From: Maciej W. Rozycki
• [PATCH 4/5] serial: core, 8250: Add a hook for extra port property reporting
  • From: Maciej W. Rozycki
• [PATCH 3/5] serial: 8250: Handle custom baud rates in UPF_MAGIC_MULTIPLIER range
  • From: Maciej W. Rozycki
• [PATCH 2/5] serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
  • From: Maciej W. Rozycki
• [PATCH 1/5] serial: 8250: Document SMSC Super I/O UART peculiarities
  • From: Maciej W. Rozycki
• [PATCH 0/5] serial, Malta: Fixes to magic multipliers for SMSC Super I/O UARTs
  • From: Maciej W. Rozycki
• [PATCH 2/2] MIPS: Malta: Do not byte-swap accesses to the CBUS UART
  • From: Maciej W. Rozycki
• [PATCH 1/2] serial: 8250: Mask out floating 16/32-bit bus bits
  • From: Maciej W. Rozycki
• [PATCH 0/2] serial, Malta: Fixes to make the CBUS UART work big-endian
  • From: Maciej W. Rozycki
• [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra
• Re: [PATCH v3 4/4] tty: make use of tty_get_{char,frame}_size
  • From: Alex Elder
• [PATCH] serial: amba-pl011: add RS485 support
  • From: Lino Sanfilippo
• [PATCH v4] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH] ipwireless: remove unused ipw_tty::closing
  • From: David Sterba
• [PATCH 1/1] serial: stm32: defer probe for dma devices
  • From: Erwan Le Ray
• [PATCH] ipwireless: remove unused ipw_tty::closing
  • From: Jiri Slaby
• [PATCH v3 4/4] tty: make use of tty_get_{char,frame}_size
  • From: Jiri Slaby
• [PATCH v3 3/4] cypress_m8: switch data_bits to real character bits
  • From: Jiri Slaby
• [PATCH v3 2/4] mxs-auart: redefine AUART_LINECTRL_WLEN to accept bits count
  • From: Jiri Slaby
• [PATCH v3 1/4] tty: make tty_get_{char,frame}_size available
  • From: Jiri Slaby
• Re: [PATCH 1/2] serial: stm32: reset dma buffers during probe
  • From: Erwan LE RAY
• RE: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Greg KH
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Geert Uytterhoeven
• [tty:tty-testing] BUILD SUCCESS a69008475fc565cec5a760f1997f326773c84aac
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS 7c3e8d9df265bd0bdf6e328174cdfba26eb22f1c
  • From: kernel test robot
• RE: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• RE: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• RE: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH v1 2/3] serial: 8250_exar: Extract exar_get_platform() helper
  • From: Andy Shevchenko
• [PATCH] serial: tegra-tcu: Reorder channel initialization
  • From: Mikko Perttunen
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Geert Uytterhoeven
• Re: [PATCH v1 3/3] serial: 8250_exar: Add ->unregister_gpio() callback
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 2/3] serial: 8250_exar: Extract exar_get_platform() helper
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] serial: stm32: reset dma buffers during probe
  • From: Greg Kroah-Hartman
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Greg KH
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Greg KH
• Re: [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Sergei Shtylyov
• Re: [PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Lad, Prabhakar
• Re: [PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Geert Uytterhoeven
• RE: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Biju Das
• Re: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• Re: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• [PATCH v3] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 05/12] arm64: defconfig: Enable ARCH_R9A07G044
  • From: Geert Uytterhoeven
• Re: [PATCH v2 06/12] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Geert Uytterhoeven
• Re: [PATCH v2 04/12] soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  • From: Geert Uytterhoeven
• Re: [PATCH v2 03/12] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Geert Uytterhoeven
• Re: [PATCH v2 02/12] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Geert Uytterhoeven
• Re: [PATCH v2 01/12] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Geert Uytterhoeven
• Re: [PATCH v1 1/3] serial: 8250_exar: Avoid NULL pointer dereference at ->exit()
  • From: Maxim Levitsky
• Re: [PATCH v2 07/12] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Geert Uytterhoeven
• Re: [PATCH v2 10/12] serial: sh-sci: Add support for RZ/G2L SoC
  • From: Geert Uytterhoeven
• [PATCH v1 2/3] serial: 8250_exar: Extract exar_get_platform() helper
  • From: Andy Shevchenko
• [PATCH v1 3/3] serial: 8250_exar: Add ->unregister_gpio() callback
  • From: Andy Shevchenko
• [PATCH v1 1/3] serial: 8250_exar: Avoid NULL pointer dereference at ->exit()
  • From: Andy Shevchenko
• Re: Commit "serial: 8250_exar: Constify the software nodes' breaks suspend/resume
  • From: Andy Shevchenko
• Re: Commit "serial: 8250_exar: Constify the software nodes' breaks suspend/resume
  • From: Andy Shevchenko
• Re: Commit "serial: 8250_exar: Constify the software nodes' breaks suspend/resume
  • From: Heikki Krogerus
• Commit "serial: 8250_exar: Constify the software nodes' breaks suspend/resume
  • From: Maxim Levitsky
• n_gsm testing
  • From: Starke, Daniel
• Re: [PATCH] serial: sh-sci: Remove unused STEPFN() macro
  • From: Laurent Pinchart
• Re: [PATCH] serial: sh-sci: Remove unused STEPFN() macro
  • From: Niklas Söderlund
• [PATCH] serial: sh-sci: Remove unused STEPFN() macro
  • From: Geert Uytterhoeven
• Re: [PATCH v2 00/12] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support
  • From: Lad, Prabhakar
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren
• Re: [PATCH v2] tty: serial: jsm: allocate queue buffer at probe time
  • From: Zheyu Ma
• Re: [PATCH v2] tty: serial: jsm: allocate queue buffer at probe time
  • From: Greg KH
• Re: [PATCH] tty: serial: jsm: add checks against NULL pointer dereference
  • From: Zheyu Ma
• [PATCH v2] tty: serial: jsm: allocate queue buffer at probe time
  • From: Zheyu Ma
• [tty:tty-testing] BUILD SUCCESS 2877389f59dc455e4283ae23ad494b410c15b3a3
  • From: kernel test robot
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring
• Re: sunxi: Bluetooth broken since 5.6-rc1
  • From: Andre Przywara
• RE: [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Biju Das
• Re: [PATCH] tty: serial: jsm: add checks against NULL pointer dereference
  • From: Greg KH
• Re: [PATCH v2] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v2] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH v2] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Jiri Slaby
• [PATCH v2] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• [tty:tty-testing] BUILD SUCCESS 910cc9537302caddc9777cf3ae2f5582730380c9
  • From: kernel test robot
• [PATCH v2 12/12] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Lad Prabhakar
• [PATCH v2 11/12] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Lad Prabhakar
• [PATCH v2 10/12] serial: sh-sci: Add support for RZ/G2L SoC
  • From: Lad Prabhakar
• [PATCH v2 09/12] clk: renesas: Add support for R9A07G044 SoC
  • From: Lad Prabhakar
• [PATCH v2 08/12] clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  • From: Lad Prabhakar
• [PATCH v2 07/12] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Lad Prabhakar
• [PATCH v2 06/12] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Lad Prabhakar
• [PATCH v2 05/12] arm64: defconfig: Enable ARCH_R9A07G044
  • From: Lad Prabhakar
• [PATCH v2 04/12] soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  • From: Lad Prabhakar
• [PATCH v2 03/12] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Lad Prabhakar
• [PATCH v2 02/12] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Lad Prabhakar
• [PATCH v2 01/12] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Lad Prabhakar
• [PATCH v2 00/12] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support
  • From: Lad Prabhakar
• Re: Need suggestion for 'access_type' of AMBA pl011 serial driver
  • From: Vladimir Zapolskiy
• Re: Need suggestion for 'access_type' of AMBA pl011 serial driver
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Need suggestion for 'access_type' of AMBA pl011 serial driver
  • From: Raviteja Narayanam
• [PATCH] tty: serial: jsm: add checks against NULL pointer dereference
  • From: Zheyu Ma
• RE: [PATCH] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH] serial:Add SUNIX SDC serial port driver
  • From: Enrico Weigelt, metux IT consult
• Re: [PATCH] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Greg KH
• [PATCH] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
  • From: Yoshihiro Shimoda
• Re: [PATCH -next] serial: Add missing MODULE_DEVICE_TABLE
  • From: Thierry Reding
• Re: (subset) [PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
  • From: Neil Armstrong
• Re: the usage of hardware flow control in serial console
  • From: Greg KH
• the usage of hardware flow control in serial console
  • From: xuyang2018.jy@xxxxxxxxxxx
• Re: sunxi: Bluetooth broken since 5.6-rc1
  • From: Russell King (Oracle)
• Re: sunxi: Bluetooth broken since 5.6-rc1
  • From: Greg Kroah-Hartman
• sunxi: Bluetooth broken since 5.6-rc1
  • From: Andre Przywara
• Re: [GIT PULL] TTY/Serial driver fixes for 5.13-rc4
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial driver fixes for 5.13-rc4
  • From: Greg KH
• [PATCH] serial: tty: uartlite: fix console setup
  • From: Daniel Mack
• Re: [PATCH] serial:Add SUNIX SDC serial port driver
  • From: Greg KH
• Re: [PATCH] Add supprt for SUNIX SDC serial port driver
  • From: Greg KH
• [PATCH] serial:Add SUNIX SDC serial port driver
  • From: Moriis Ku
• [PATCH] Add supprt for SUNIX SDC serial port driver
  • From: Moriis Ku
• Re: [PATCHv5 0/2] Fix imx53-ppd UART configuration
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Greg Kroah-Hartman
• Re: [PATCH 13/16] clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  • From: Lad, Prabhakar
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Vignesh Raghavendra
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Tony Lindgren
• Re: [PATCHv5 0/2] Fix imx53-ppd UART configuration
  • From: Sebastian Reichel
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Grygorii Strashko
• [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra
• Re: [PATCH 13/16] clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Lad, Prabhakar
• Re: [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Geert Uytterhoeven
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Lad, Prabhakar
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Lad, Prabhakar
• Re: [PATCH 04/16] soc: renesas: Add ARCH_R9A07G044{L,LC} for the new RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Geert Uytterhoeven
• Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• [PATCH] serial: 8250_pci: handle FL_NOIRQ board flag
  • From: Christian Gmeiner
• Re: [PATCH 1/2] serial: stm32: reset dma buffers during probe
  • From: Greg Kroah-Hartman
• [PATCH 2/2] serial: stm32: defer probe for dma devices
  • From: Erwan Le Ray
• [PATCH 1/2] serial: stm32: reset dma buffers during probe
  • From: Erwan Le Ray
• [PATCH 0/2] stm32 usart improve DMA probe
  • From: Erwan Le Ray
• [PATCH v2] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
  • From: Christophe JAILLET
• Re: [PATCH v4 01/10] dt-bindings: i2c: i2c-rk3x: add description for rk3568
  • From: Wolfram Sang
• [PATCH 1/2] tty: serial: uartlite: Disable clocks in case of errors
  • From: Shubhrajyoti Datta
• [PATCH 0/2] tty: serial: uartlite: PM Runtime
  • From: Shubhrajyoti Datta
• [PATCH 2/2] tty: serial: uartlite: Add runtime pm support
  • From: Shubhrajyoti Datta
• Re: [PATCH 1/2] tty: serial: uartlite: Disable clocks in case of errors
  • From: Greg KH
• Re: [PATCH 2/2] tty: serial: uartlite: Add runtime pm support
  • From: Greg KH
• [PATCH AUTOSEL 4.9 02/19] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 02/21] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 02/25] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 06/52] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 05/52] Revert "serial: max310x: pass return value of spi_register_driver"
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 07/62] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 06/62] Revert "serial: max310x: pass return value of spi_register_driver"
  • From: Sasha Levin
• [PATCH AUTOSEL 5.12 07/63] serial: max310x: unregister uart driver in case of failure and abort
  • From: Sasha Levin
• [PATCH AUTOSEL 5.12 06/63] Revert "serial: max310x: pass return value of spi_register_driver"
  • From: Sasha Levin
• Re: [PATCH 2/2] dt-bindings: serial: pl011: Avoid matching device tree nodes of variant pl011 drivers
  • From: Leizhen (ThunderTown)
• [tty:tty-next] BUILD SUCCESS f421ed33ee2bddac5857862da3a37f0ea3f197d8
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS 016002848c82eeb5d460489ce392d91fe18c475c
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 2ac62268a2c0f2ffafc19a7ced6972a9b1330389
  • From: kernel test robot
• Re: [PATCH 1/2] dt-bindings: serial: pl011: Delete an incorrect compatible string
  • From: Rob Herring
• Re: [PATCH 2/2] dt-bindings: serial: pl011: Avoid matching device tree nodes of variant pl011 drivers
  • From: Rob Herring
• Re: [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Lad, Prabhakar
• Re: [PATCH 12/16] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Lad, Prabhakar
• Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Lad, Prabhakar
• Re: [PATCH 16/16] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Lad, Prabhakar
• Re: [PATCH 04/16] soc: renesas: Add ARCH_R9A07G044{L,LC} for the new RZ/G2{L,LC} SoC's
  • From: Lad, Prabhakar
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Lad, Prabhakar
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Lad, Prabhakar
• Re: [PATCH 16/16] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Geert Uytterhoeven
• Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• Re: [PATCH 12/16] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Geert Uytterhoeven
• Re: [PATCH 09/16] dt-bindings: serial: renesas,scif: Document r9a07g044 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Geert Uytterhoeven
• Re: [PATCH 12/16] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Geert Uytterhoeven
• Re: [PATCH 13/16] clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 10/16] serial: sh-sci: Add support for RZ/G2L SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 09/16] dt-bindings: serial: renesas,scif: Document r9a07g044 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 06/16] dt-bindings: arm: renesas,prr: Add new compatible string for RZ/G{L,LC,UL}
  • From: Geert Uytterhoeven
• Re: [PATCH 04/16] soc: renesas: Add ARCH_R9A07G044{L,LC} for the new RZ/G2{L,LC} SoC's
  • From: Geert Uytterhoeven
• Re: [PATCH 03/16] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Geert Uytterhoeven
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Geert Uytterhoeven
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Geert Uytterhoeven
• Re: [PATCH v2] serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  • From: Greg KH
• Re: [PATCH v2] serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  • From: Zheyu Ma
• Re: [PATCH 00/11] tty: serial: Fix some coding style issues
  • From: Johan Hovold
• Re: [PATCH v2] serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  • From: Greg KH
• [PATCH v2] serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  • From: Zheyu Ma
• Re: [PATCH] serial: rp2: disable interrupt in rp2_probe():
  • From: Zheyu Ma
• [tty:tty-linus] BUILD SUCCESS e0e24208792080135248f23fdf6d51aa2e04df05
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS b50155c65c579c3ad6e73010e400e9ea7b15860a
  • From: kernel test robot
• Re: [PATCH 2/2] dt-bindings: serial: pl011: Avoid matching device tree nodes of variant pl011 drivers
  • From: Leizhen (ThunderTown)
• Re: [PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
  • From: Neil Armstrong
• Re: [PATCH 00/11] Rid W=1 warnings from TTY
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: rp2: disable interrupt in rp2_probe():
  • From: Greg KH
• Re: [PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
  • From: Greg KH
• Re: [PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
  • From: Neil Armstrong
• [PATCH 11/11] tty: serial: xilinx_uartps: Fix documentation for cdns_uart_clk_notifier_cb()
  • From: Lee Jones
• [PATCH 09/11] tty: serial: st-asc: Demote a kernel-doc formatting abuse
  • From: Lee Jones
• [PATCH 02/11] tty: serdev: core: Fix misspelled function name __serdev_device_driver_register()
  • From: Lee Jones
• [PATCH 00/11] Rid W=1 warnings from TTY
  • From: Lee Jones
• Re: [PATCH 11/11] tty: serial: xilinx_uartps: Fix documentation for cdns_uart_clk_notifier_cb()
  • From: Michal Simek
• [PATCH 1/2] dt-bindings: serial: pl011: Delete an incorrect compatible string
  • From: Zhen Lei
• [PATCH 2/2] dt-bindings: serial: pl011: Avoid matching device tree nodes of variant pl011 drivers
  • From: Zhen Lei
• [PATCH 0/2] dt-bindings: serial: pl011: Avoid matching device tree nodes of variant pl011 drivers
  • From: Zhen Lei
• RE: [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: ChiaWei Wang
• Re: [PATCH v3 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Jiri Slaby
• Re: [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Jiri Slaby
• [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• [PATCH v3 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Andrew Jeffery
• [PATCH v3 0/2] serial: 8250: Mitigate Tx stall risk for Aspeed VUARTs
  • From: Andrew Jeffery
• Re: Please backport b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
  • From: Sasha Levin
• Re: [PATCH 1/3] dt-bindings: serial: amlogic, meson-uart: add fifo-size property
  • From: Rob Herring
• Please backport b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
  • From: Richard Weinberger
• Re: [PATCH v4 04/10] dt-bindings: watchdog: dw-wdt: add description for rk3568
  • From: Guenter Roeck
• Re: [PATCH] serial: drop irq-flags initialisations
  • From: Uwe Kleine-König
• [PATCH] serial: drop irq-flags initialisations
  • From: Johan Hovold
• Re: [PATCH 29/35] USB: serial: digi_acceleport, simplify digi_chars_in_buffer
  • From: Johan Hovold
• Re: [PATCH 27/35] serial: make usb_serial_driver::chars_in_buffer return uint
  • From: Johan Hovold
• Re: [PATCH 23/35] USB: serial: make usb_serial_driver::write_room return uint
  • From: Johan Hovold
• [PATCH 4/4] tty: fix kernel-doc for {start,stop}_tty
  • From: Jiri Slaby
• [PATCH 3/4] tty: fix kernel-doc for tty_{read,write}
  • From: Jiri Slaby
• [PATCH 2/4] tty/serial: make port of serial8250_register_8250_port const
  • From: Jiri Slaby
• [PATCH 1/4] tty/serial: clean up uart_match_port
  • From: Jiri Slaby
• Re: [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Andrew Jeffery
• Re: [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Jiri Slaby
• Re: [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Andrew Jeffery
• Re: [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Jiri Slaby
• Re: [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Jiri Slaby
• Re: [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• Re: [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Joel Stanley
• [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  • From: Andrew Jeffery
• [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• [PATCH v2 0/2] serial: 8250: Mitigate Tx stall risk for Aspeed VUARTs
  • From: Andrew Jeffery
• Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• Re: [PATCH v2] serial: liteuart: Add support for earlycon
  • From: Stafford Horne
• Re: [PATCH 2/9] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK1808
  • From: Rob Herring
• Re: [PATCH v2] serial: liteuart: Add support for earlycon
  • From: Joel Stanley
• [PATCH 3/3] arm64: dts: meson: set 128bytes FIFO size on uart A
  • From: Neil Armstrong
• [PATCH 2/3] tty: serial: meson: retrieve port FIFO size from DT
  • From: Neil Armstrong
• [PATCH 1/3] dt-bindings: serial: amlogic,meson-uart: add fifo-size property
  • From: Neil Armstrong
• [PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
  • From: Neil Armstrong
• Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Greg Kroah-Hartman
• Re: [PATCH 00/11] tty: serial: Fix some coding style issues
  • From: Greg KH
• Re: [PATCH v2] serial: liteuart: Add support for earlycon
  • From: Jiri Slaby
• [PATCH 00/11] tty: serial: Fix some coding style issues
  • From: Jay Fang
• [PATCH 07/11] tty: serial: bcm63xx_uart: Fix some coding style issues
  • From: Jay Fang
• [PATCH 09/11] tty: serial: digicolor: Use 'unsigned int' instead of 'unsigned'
  • From: Jay Fang
• [PATCH 08/11] tty: serial: clps711x: Fix some coding style issuses
  • From: Jay Fang
• [PATCH 10/11] tty: serial: dz: Use 'unsigned int' instead of 'unsigned'
  • From: Jay Fang
• [PATCH 11/11] tty: serial: earlycon-arm-semihost : Fix some coding style issuses
  • From: Jay Fang
• [PATCH 05/11] tty: serial: apbuart: Fix some coding sytle issues
  • From: Jay Fang
• [PATCH 03/11] tty: serial: amba-pl011: Replace the unsuitable spaces with tabs
  • From: Jay Fang
• [PATCH 06/11] tty: serial: atmel: Fix some coding style issues
  • From: Jay Fang
• [PATCH 01/11] tty: serial: 21285: Fix some coding sytle issues
  • From: Jay Fang
• [PATCH 04/11] tty: serial: amba-pl011: Remove initialization of static variable
  • From: Jay Fang
• [PATCH 02/11] tty: serial: amba-pl010: Fix 2 coding style issues
  • From: Jay Fang
• Re: [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Rob Herring
• Re: [PATCH 09/16] dt-bindings: serial: renesas, scif: Document r9a07g044 bindings
  • From: Rob Herring
• Re: [PATCH 06/16] dt-bindings: arm: renesas, prr: Add new compatible string for RZ/G{L, LC, UL}
  • From: Rob Herring
• Re: [PATCH 03/16] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Rob Herring
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L, LC} SoC variants
  • From: Rob Herring
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Rob Herring
• Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• [PATCH v1 1/1] serial: sc16is7xx: Use devm_clk_get_optional()
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: max310x: Try to get crystal clock rate from property
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_dw: Add device HID for new AMD UART controller
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Greg KH
• Re: [PATCH] serial: 8250_dw: Add device HID for new AMD UART controller
  • From: Rafael J. Wysocki
• [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  • From: Andrew Jeffery
• [PATCH v2] serial: liteuart: Add support for earlycon
  • From: Stafford Horne
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Stafford Horne
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Jiri Slaby
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Stafford Horne
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Jiri Slaby
• [PATCH 2/9] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK1808
  • From: Andreas Färber
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Gabriel L. Somlo
• Re: [PATCH] serial/liteuart; Add support for earlycon
  • From: Stafford Horne
• [PATCH] serial/liteuart; Add support for earlycon
  • From: Stafford Horne
• [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  • From: Lad Prabhakar
• [PATCH 08/16] soc: renesas: Add support to identify RZ/G2{L,LC} SoC's
  • From: Lad Prabhakar
• [PATCH 07/16] soc: renesas: Add support to read LSI DEVID register
  • From: Lad Prabhakar
• [PATCH 06/16] dt-bindings: arm: renesas,prr: Add new compatible string for RZ/G{L,LC,UL}
  • From: Lad Prabhakar
• [PATCH 03/16] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Lad Prabhakar
• [PATCH 00/16] Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support
  • From: Lad Prabhakar
• [PATCH 16/16] arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  • From: Lad Prabhakar
• [PATCH 14/16] clk: renesas: Add support for R9A07G044L SoC
  • From: Lad Prabhakar
• [PATCH 13/16] clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  • From: Lad Prabhakar
• [PATCH 12/16] clk: renesas: Define RZ/G2L CPG Clock Definitions
  • From: Lad Prabhakar
• [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  • From: Lad Prabhakar
• [PATCH 10/16] serial: sh-sci: Add support for RZ/G2L SoC
  • From: Lad Prabhakar
• [PATCH 09/16] dt-bindings: serial: renesas,scif: Document r9a07g044 bindings
  • From: Lad Prabhakar
• [PATCH 05/16] arm64: defconfig: Enable ARCH_R9A07G044{L,LC}
  • From: Lad Prabhakar
• [PATCH 04/16] soc: renesas: Add ARCH_R9A07G044{L,LC} for the new RZ/G2{L,LC} SoC's
  • From: Lad Prabhakar
• [PATCH 02/16] dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  • From: Lad Prabhakar
• [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
  • From: Lad Prabhakar
• Re: [PATCH] Add support for new HPE serial device
  • From: Jerry Hoemann
• [PATCH] Add support for new HPE serial device
  • From: Randy Wright
• [PATCH] serial: rp2: disable interrupt in rp2_probe():
  • From: Zheyu Ma
• Re: [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: Heiko Stuebner
• Re: [PATCH 00/35] tty cleanup for 5.14
  • From: Johan Hovold
• Re: [PATCH] serial: 8250_omap: fix a timeout loop condition
  • From: Dan Carpenter
• [tty:tty-testing] BUILD SUCCESS 7912146abf6705c771b28ea5b6d608ee2ea39dcd
  • From: kernel test robot
• Re: [PATCH] serial: kgdb_nmi: remove redundant initialization of variable c
  • From: Jiri Slaby
• [tty:tty-linus] BUILD SUCCESS 3c35d2a960c0077a4cb09bf4989f45d289332ea0
  • From: kernel test robot
• Re: [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
  • From: Andrew Jeffery
• [PATCH] serial: kgdb_nmi: remove redundant initialization of variable c
  • From: Colin King
• Re: [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
  • From: Zev Weiss
• Re: [PATCH 00/35] tty cleanup for 5.14
  • From: Greg KH
• Re: [PATCH 00/35] tty cleanup for 5.14
  • From: Johan Hovold
• Re: [PATCH 00/12] use <linux/io.h> instead of <linux/io.h>
  • From: Greg KH
• Re: [PATCH 00/35] tty cleanup for 5.14
  • From: Greg KH
• Re: [PATCH] serial: 8250: fix NULL pointer dereference in serial8250_do_startup()
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
  • From: Greg KH
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 34/35] tty: make tty_get_byte_size available
  • From: Johan Hovold
• Re: [PATCH v2 34/35] tty: make tty_get_byte_size available
  • From: Jiri Slaby
• Re: [PATCH] serial: 8250_dw: Add device HID for new AMD UART controller
  • From: Andy Shevchenko
• [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: cl
• [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: cl
• [PATCH 12/12] tty: serial: sb1250-duart: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang
• [PATCH 02/12] tty: serial: dz: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang
• [PATCH 03/12] tty: serial: icom: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang
• [PATCH 05/12] tty: serial: mux: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang
• [PATCH 07/12] tty: serial: txx9: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang
• [PATCH 01/12] tty: serial: atmel: include <linux/io.h> instead of <asm/io.h>
  • From: Jay Fang