There is a dev_info in ->probe which prints device's name, bus and slot
numbers. All these can be fetched from the lspci output. So remove this
useless print.
This eliminates the whole mxser_cardinfo::name field.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/tty/mxser.c | 56 +++++++++++++++++++++------------------------
1 file changed, 26 insertions(+), 30 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 83c795acdb19..04a39c1f13bb 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -190,38 +190,37 @@ static const struct {
#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
struct mxser_cardinfo {
- char *name;
unsigned int nports;
unsigned int flags;
};
static const struct mxser_cardinfo mxser_cards[] = {
-/* 0*/ { "C168H/PCI series", 8, },
- { "C104H/PCI series", 4, },
- { "CP-132 series", 2, },
- { "CP-114 series", 4, },
- { "CT-114 series", 4, },
-/* 5*/ { "CP-102 series", 2, MXSER_HIGHBAUD },
- { "CP-104U series", 4, },
- { "CP-168U series", 8, },
- { "CP-132U series", 2, },
- { "CP-134U series", 4, },
-/*10*/ { "CP-104JU series", 4, },
- { "Moxa UC7000 Serial", 8, }, /* RC7000 */
- { "CP-118U series", 8, },
- { "CP-102UL series", 2, },
- { "CP-102U series", 2, },
-/*15*/ { "CP-118EL series", 8, },
- { "CP-168EL series", 8, },
- { "CP-104EL series", 4, },
- { "CB-108 series", 8, },
- { "CB-114 series", 4, },
-/*20*/ { "CB-134I series", 4, },
- { "CP-138U series", 8, },
- { "POS-104UL series", 4, },
- { "CP-114UL series", 4, },
- { "CP-102UF series", 2, },
-/*25*/ { "CP-112UL series", 2, },
+/* 0*/ { 8, },
+ { 4, },
+ { 2, },
+ { 4, },
+ { 4, },
+/* 5*/ { 2, MXSER_HIGHBAUD },
+ { 4, },
+ { 8, },
+ { 2, },
+ { 4, },
+/*10*/ { 4, },
+ { 8, }, /* RC7000 */
+ { 8, },
+ { 2, },
+ { 2, },
+/*15*/ { 8, },
+ { 8, },
+ { 4, },
+ { 8, },
+ { 4, },
+/*20*/ { 4, },
+ { 8, },
+ { 4, },
+ { 4, },
+ { 2, },
+/*25*/ { 2, },
};
/* driver_data correspond to the lines in the structure above
@@ -1961,9 +1960,6 @@ static int mxser_probe(struct pci_dev *pdev,
brd = &mxser_boards[i];
brd->idx = i * MXSER_PORTS_PER_BOARD;
- dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
- mxser_cards[ent->driver_data].name,
- pdev->bus->number, PCI_SLOT(pdev->devfn));
retval = pcim_enable_device(pdev);
if (retval) {
--
2.32.0
