Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 10, 2021 at 12:22 PM Vignesh Raghavendra <vigneshr@xxxxxx> wrote:
>
> Convert serial-omap.txt to YAML schema for better checks and documentation.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---
>
> v2:
> *Drop reg-io-width and reg-shift as they are constant and documented in
>  txt bindings (also not used by driver).
> *Drop unused label in example.
> *Rename file to 8250_omap.yaml to be more generic as IP is present in
> varies families of TI SoCs.
> *Add description for interrupt entries
>
>  .../devicetree/bindings/serial/8250_omap.yaml | 118 ++++++++++++++++++
>  .../bindings/serial/omap_serial.txt           |  40 ------
>  2 files changed, 118 insertions(+), 40 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml
>  delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> new file mode 100644
> index 000000000000..1c826fcf5828
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> @@ -0,0 +1,118 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/8250_omap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
> +
> +maintainers:
> +  - Vignesh Raghavendra <vigneshr@xxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/serial/serial.yaml#
> +  - $ref: /schemas/serial/rs485.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - ti,am3352-uart
> +          - ti,am4372-uart
> +          - ti,am654-uart
> +          - ti,dra742-uart
> +          - ti,omap2-uart
> +          - ti,omap3-uart
> +          - ti,omap4-uart
> +      - items:
> +          - enum:
> +              - ti,am64-uart
> +              - ti,j721e-uart
> +          - const: ti,am654-uart
> +
> +  ti,hwmods:
> +    description:
> +      Must be "uart<n>", n being the instance number (1-based)
> +      This property is applicable only on legacy platforms mainly omap2/3
> +      and ti81xx and should not be used on other platforms.
> +    $ref: /schemas/types.yaml#/definitions/string
> +    deprecated: true
> +
> +  dmas:
> +    minItems: 1
> +    maxItems: 2
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description:
> +      First entry is module IRQ required for normal IO operation.
> +      Second entry is optional and corresponds to system wakeup IRQ
> +      where supported.

interrupts:
  minItems: 1
  items:
    - description: module IRQ required for normal IO operation
    - description: system wakeup IRQ

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: fclk
> +
> +  rts-gpios: true
> +  cts-gpios: true
> +  dtr-gpios: true
> +  dsr-gpios: true
> +  rng-gpios: true
> +  dcd-gpios: true
> +  rs485-rts-delay: true
> +  rs485-rts-active-low: true
> +  rs485-rx-during-tx: true
> +  rs485-rts-active-high: true
> +  linux,rs485-enabled-at-boot-time: true
> +  rts-gpio: true
> +  power-domains: true
> +  clock-frequency: true
> +  current-speed: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false

Do you want to support serial attached devices? If so, you need:

unevaluatedProperties: false

You can also drop listing all the inherited properties from the
included schemas.

> +
> +if:
> +  properties:
> +    compatible:
> +      oneOf:
> +        - const: ti,omap2-uart
> +        - const: ti,omap3-uart
> +        - const: ti,omap4-uart
> +
> +then:
> +  properties:
> +    ti,hwmods:
> +      items:
> +        - pattern: "^uart([1-9])$"
> +
> +else:
> +  properties:
> +    ti,hwmods: false
> +
> +examples:
> +  - |
> +          serial@49042000 {
> +            compatible = "ti,omap3-uart";
> +            reg = <0x49042000 0x400>;
> +            interrupts = <80>;
> +            dmas = <&sdma 81 &sdma 82>;
> +            dma-names = "tx", "rx";
> +            ti,hwmods = "uart4";
> +            clock-frequency = <48000000>;
> +          };
> diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
> deleted file mode 100644
> index c2db8cabf2ab..000000000000
> --- a/Documentation/devicetree/bindings/serial/omap_serial.txt
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -OMAP UART controller
> -
> -Required properties:
> -- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers
> -- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers
> -- compatible : should be "ti,am654-uart" for AM654 controllers
> -- compatible : should be "ti,omap2-uart" for OMAP2 controllers
> -- compatible : should be "ti,omap3-uart" for OMAP3 controllers
> -- compatible : should be "ti,omap4-uart" for OMAP4 controllers
> -- compatible : should be "ti,am4372-uart" for AM437x controllers
> -- compatible : should be "ti,am3352-uart" for AM335x controllers
> -- compatible : should be "ti,dra742-uart" for DRA7x controllers
> -- reg : address and length of the register space
> -- interrupts or interrupts-extended : Should contain the uart interrupt
> -                                      specifier or both the interrupt
> -                                      controller phandle and interrupt
> -                                      specifier.
> -- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
> -
> -Optional properties:
> -- clock-frequency : frequency of the clock input to the UART
> -- dmas : DMA specifier, consisting of a phandle to the DMA controller
> -         node and a DMA channel number.
> -- dma-names : "rx" for receive channel, "tx" for transmit channel.
> -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
> -- rs485-rts-active-high: drive RTS high when sending (default is low).
> -- clocks: phandle to the functional clock as per
> -  Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Example:
> -
> -                uart4: serial@49042000 {
> -                        compatible = "ti,omap3-uart";
> -                        reg = <0x49042000 0x400>;
> -                        interrupts = <80>;
> -                        dmas = <&sdma 81 &sdma 82>;
> -                        dma-names = "tx", "rx";
> -                        ti,hwmods = "uart4";
> -                        clock-frequency = <48000000>;
> -                };
> --
> 2.32.0
>



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux