On Thu, May 20, 2021 at 03:55:35PM +0200, Neil Armstrong wrote: > Hi Greg, > > On 18/05/2021 09:58, Neil Armstrong wrote: > > On most of the Amlogic SoCs, the first UART controller in the "Everything-Else" > > power domain has 128bytes of RX & TX FIFO, so add an optional property to describe > > a different FIFO size from the other ports (64bytes). > > > > This adds a property in the bindings, reads the property from the driver and updates > > the DT with the new property. > > > > Changes since v2: > > - removed spurious blank line from bindings > > > > Changes since v1: > > - switched to a more generic "fifo-size" > > > > Neil Armstrong (3): > > dt-bindings: serial: amlogic,meson-uart: add fifo-size property > > tty: serial: meson: retrieve port FIFO size from DT > > arm64: dts: meson: set 128bytes FIFO size on uart A > > > > .../devicetree/bindings/serial/amlogic,meson-uart.yaml | 5 +++++ > > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 1 + > > arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 + > > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 + > > drivers/tty/serial/meson_uart.c | 5 ++++- > > 5 files changed, 12 insertions(+), 1 deletion(-) > > > > Could you apply patches 1 & 2 ? Sure, will go do so now...
