mxser_board::vector_mask is just a bitfield with bits set for all
available ports. We can obtain this value simply by
"BIT(brd->info->nports) - 1" directly in the ISR. So remove vector_mask
and simplify the code a bit.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/tty/mxser.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 555b9b37b52f..df59ca88acab 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -368,7 +368,6 @@ struct mxser_board {
int irq;
const struct mxser_cardinfo *info;
unsigned long vector;
- unsigned long vector_mask;
enum mxser_must_hwid must_hwid;
speed_t max_baud;
@@ -2273,18 +2272,18 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
struct mxser_board *brd = dev_id;
struct mxser_port *port;
unsigned int int_cnt, pass_counter = 0;
- int max, irqbits, bits, i;
+ unsigned int i, max = brd->info->nports;
int handled = IRQ_NONE;
+ u8 irqbits, bits, mask = BIT(max) - 1;
- max = brd->info->nports;
while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
- irqbits = inb(brd->vector) & brd->vector_mask;
- if (irqbits == brd->vector_mask)
+ irqbits = inb(brd->vector) & mask;
+ if (irqbits == mask)
break;
handled = IRQ_HANDLED;
for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
- if (irqbits == brd->vector_mask)
+ if (irqbits == mask)
break;
if (bits & irqbits)
continue;
@@ -2450,7 +2449,6 @@ static int mxser_probe(struct pci_dev *pdev,
brd->irq = pdev->irq;
brd->must_hwid = mxser_must_get_hwid(brd->ports[0].ioaddr);
- brd->vector_mask = 0;
for (j = 0; j < UART_INFO_NUM; j++) {
if (Gpci_uart_info[j].type == brd->must_hwid) {
@@ -2475,7 +2473,6 @@ static int mxser_probe(struct pci_dev *pdev,
}
for (i = 0; i < brd->info->nports; i++) {
- brd->vector_mask |= (1 << i);
brd->ports[i].baud_base = 921600;
}
--
2.32.0
