Linux Serial

• Thread Index

• Re: [PATCH v1 3/7] serial: imx: do not sysrq broken chars
  • From: Sergey Organov
• Re: [GIT PULL] TTY/Serial driver fixes for 6.2-rc5
  • From: pr-tracker-bot
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH v1 3/7] serial: imx: do not sysrq broken chars
  • From: Stefan Wahren
• [PATCH v1 7/7] serial: imx: refine local variables in rxint()
  • From: Sergey Organov
• [PATCH v1 2/7] serial: imx: work-around for hardware RX flood
  • From: Sergey Organov
• [PATCH v1 6/7] serial: imx: stop using USR2 in FIFO reading loop
  • From: Sergey Organov
• [PATCH v1 3/7] serial: imx: do not sysrq broken chars
  • From: Sergey Organov
• [PATCH v1 5/7] serial: imx: remove redundant USR2 read from FIFO reading loop
  • From: Sergey Organov
• [PATCH v1 4/7] serial: imx: do not break from FIFO reading loop prematurely
  • From: Sergey Organov
• [PATCH v1 1/7] serial: imx: factor-out common code to imx_uart_soft_reset()
  • From: Sergey Organov
• [PATCH v1 0/7] serial: imx: work-around for hardware RX flood, and then isr improvements
  • From: Sergey Organov
• [GIT PULL] TTY/Serial driver fixes for 6.2-rc5
  • From: Greg KH
• [tty:tty-linus] BUILD SUCCESS 14ee78d5932afeb710c8305196a676a715bfdea8
  • From: kernel test robot
• Re: [tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared
  • From: Marek Vasut
• [PATCH v6] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared
  • From: Johan Hovold
• Re: [tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared
  • From: Greg Kroah-Hartman
• Re: [PATCH v10 tty-next 0/4] serial: 8250_pci1xxxx: Add driver for the pci1xxxx's quad-uart function
  • From: Greg KH
• Re: [PATCH v2] tty: serial: zs: convert atomic_* to refcount_* APIs for irq_guard
  • From: Greg Kroah-Hartman
• Re: [PATCH v3] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Greg KH
• Re: [PATCH] serial: samsung: fix buffer size for clk_name
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS 05e2600cb0a4d73b0779cf29512819616252aeeb
  • From: kernel test robot
• [tty:tty-linus] BUILD REGRESSION 5342ab0af45064cbdc773645b93ab70c24ee161f
  • From: kernel test robot
• Re: [PATCH v11 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: Xu Yilun
• [PATCH v4] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Matthew Howell
• Re: [tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared
  • From: Marek Vasut
• [tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared
  • From: kernel test robot
• [PATCH v3] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Matthew Howell
• Re: [PATCH v2] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Greg KH
• Re: [PATCH v2] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Greg KH
• [PATCH v2] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Matthew Howell
• Re: [PATCH] serial: clps711x: Fix error handling in uart_clps711x_init()
  • From: Greg KH
• Re: [PATCH] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Greg KH
• Re: [RESEND PATCH 0/2] tty: serial: add and use a managed variant of uart_add_one_port()
  • From: Greg Kroah-Hartman
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Uwe Kleine-König
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Ilpo Järvinen
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: remove arch/sh
  • From: Rob Landley
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Ilpo Järvinen
• Re: [PATCH 3/8] serial: imx: do not sysrq broken chars
  • From: Johan Hovold
• Re: remove arch/sh
  • From: Geert Uytterhoeven
• Re: remove arch/sh
  • From: Rob Landley
• Re: [PATCH v11 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: remove arch/sh
  • From: D. Jeff Dionne
• Re: remove arch/sh
  • From: Guenter Roeck
• Re: [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
  • From: Kuninori Morimoto
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Uwe Kleine-König
• Re: remove arch/sh
  • From: Geert Uytterhoeven
• Re: remove arch/sh
  • From: Rob Landley
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH 3/8] serial: imx: do not sysrq broken chars
  • From: Sergey Organov
• Re: [PATCH 1/8] serial: imx: factor-out common code to imx_uart_soft_reset()
  • From: Sergey Organov
• Re: [PATCH 6/8] serial: imx: stop using USR2 in FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Uwe Kleine-König
• RE: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sherry Sun
• [PATCH v4 12/12] tty: moxa: Rename dtr/rts parameters/variables to active
  • From: Ilpo Järvinen
• [PATCH v4 11/12] tty: Call ->dtr_rts() parameter active consistently
  • From: Ilpo Järvinen
• [PATCH v4 10/12] tty: Return bool from tty_termios_hw_change()
  • From: Ilpo Järvinen
• [PATCH v4 08/12] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active
  • From: Ilpo Järvinen
• [PATCH v4 09/12] serial: Make uart_handle_cts_change() status param bool active
  • From: Ilpo Järvinen
• [PATCH v4 07/12] tty: Convert ->dtr_rts() to take bool argument
  • From: Ilpo Järvinen
• [PATCH v4 06/12] tty: Convert ->carrier_raised() and callchains to bool
  • From: Ilpo Järvinen
• [PATCH v4 05/12] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Ilpo Järvinen
• [PATCH v4 04/12] tty: moxa: Make local var storing tty_port_initialized() bool
  • From: Ilpo Järvinen
• [PATCH v4 03/12] tty: Cleanup tty_port_set_active() bool parameter
  • From: Ilpo Järvinen
• [PATCH v4 02/12] tty: Cleamup tty_port_set_suspended() bool parameter
  • From: Ilpo Järvinen
• [PATCH v4 01/12] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Ilpo Järvinen
• [PATCH v4 00/12] tty/serial: bool conversions and cleanups
  • From: Ilpo Järvinen
• [PATCH] serial: exar: Add support for Sealevel 7xxxC serial cards
  • From: Matthew Howell
• Re: [PATCH v11 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Marco Pagani
• Re: [PATCH] serial: samsung: fix buffer size for clk_name
  • From: Alexey V. Vissarionov
• [PATCH v3] hid-ft260: Add serial driver
  • From: Christina Quast
• Re: [PATCH] serial: samsung: fix buffer size for clk_name
  • From: Krzysztof Kozlowski
• Re: [PATCH 3/8] serial: imx: do not sysrq broken chars
  • From: Johan Hovold
• [PATCH] serial: samsung: fix buffer size for clk_name
  • From: Alexey V. Vissarionov
• Re: [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Ilpo Järvinen
• Re: [PATCH 6/8] serial: imx: stop using USR2 in FIFO reading loop
  • From: Ilpo Järvinen
• Re: [PATCH 5/8] serial: imx: remove redundant USR2 read from FIFO reading loop
  • From: Ilpo Järvinen
• Re: [PATCH 3/8] serial: imx: do not sysrq broken chars
  • From: Ilpo Järvinen
• Re: [PATCH 1/8] serial: imx: factor-out common code to imx_uart_soft_reset()
  • From: Ilpo Järvinen
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz
• [PATCH v5 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: remove arch/sh
  • From: Christoph Hellwig
• Re: remove arch/sh
  • From: Christoph Hellwig
• [PATCH v11 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH v11 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v11 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v11 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v11 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Rob Landley
• Re: remove arch/sh
  • From: Rob Landley
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: remove arch/sh
  • From: Rob Landley
• [PATCH 8/8] serial: imx: refine local variables in rxint()
  • From: Sergey Organov
• [PATCH 7/8] serial: imx: use readl() to optimize FIFO reading loop
  • From: Sergey Organov
• [PATCH 6/8] serial: imx: stop using USR2 in FIFO reading loop
  • From: Sergey Organov
• [PATCH 5/8] serial: imx: remove redundant USR2 read from FIFO reading loop
  • From: Sergey Organov
• [PATCH 4/8] serial: imx: do not break from FIFO reading loop prematurely
  • From: Sergey Organov
• [PATCH 3/8] serial: imx: do not sysrq broken chars
  • From: Sergey Organov
• [PATCH 2/8] serial: imx: work-around for hardware RX flood
  • From: Sergey Organov
• [PATCH 1/8] serial: imx: factor-out common code to imx_uart_soft_reset()
  • From: Sergey Organov
• [PATCH 0/8] serial: imx: work-around for hardware RX flood, and then isr improvements
  • From: Sergey Organov
• Re: [PATCH 04/22] sound: remove sound/sh
  • From: Takashi Iwai
• Re: remove arch/sh
  • From: Rob Herring
• Re: [PATCH 06/22] watchdog: remove the shwdt driver
  • From: Guenter Roeck
• Re: [PATCH v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: Petr Mladek
• Re: [PATCH v3 06/13] tty: Convert ->carrier_raised() and callchains to bool
  • From: Ulf Hansson
• Re: [PATCH v3 11/13] tty/serial: Call ->dtr_rts() parameter active consistently
  • From: Ulf Hansson
• Re: [PATCH v3 07/13] tty: Convert ->dtr_rts() to take bool argument
  • From: Ulf Hansson
• Re: [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: Arnd Bergmann
• Re: [PATCH v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: John Ogness
• Re: [PATCH v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: Petr Mladek
• Re: [PATCH 20/22] media: remove sh_vou
  • From: Hans Verkuil
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Geert Uytterhoeven
• Re: [PATCH 19/22] fbdev: remove sh7760fb
  • From: Geert Uytterhoeven
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz
• Re: [PATCH 16/22] spi: remove spi-sh-sci
  • From: Geert Uytterhoeven
• Re: [PATCH 13/22] pinctrl: remove renesas sh controllers
  • From: Geert Uytterhoeven
• Re: [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: Geert Uytterhoeven
• Re: [PATCH 10/22] input: remove sh_keysc
  • From: Geert Uytterhoeven
• Re: remove arch/sh
  • From: Geert Uytterhoeven
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Geert Uytterhoeven
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz
• Re: [PATCH 20/22] media: remove sh_vou
  • From: Laurent Pinchart
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Laurent Pinchart
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Laurent Pinchart
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Christoph Hellwig
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Greg Kroah-Hartman
• [PATCH 20/22] media: remove sh_vou
  • From: Christoph Hellwig
• [PATCH 19/22] fbdev: remove sh7760fb
  • From: Christoph Hellwig
• [PATCH 18/22] usb: remove ehci-sh
  • From: Christoph Hellwig
• [PATCH 08/22] dmaengine: remove the shdmac driver
  • From: Christoph Hellwig
• [PATCH 17/22] spi: remove spi-jcore
  • From: Christoph Hellwig
• [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device
  • From: Christoph Hellwig
• [PATCH 22/22] drivers: platform: remove early_platform_cleanup
  • From: Christoph Hellwig
• [PATCH 16/22] spi: remove spi-sh-sci
  • From: Christoph Hellwig
• [PATCH 15/22] spi: remove spi-sh
  • From: Christoph Hellwig
• [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: Christoph Hellwig
• [PATCH 07/22] cpufreq: remove the sh-cpufreq driver
  • From: Christoph Hellwig
• [PATCH 09/22] i2c: remove i2c-sh7760
  • From: Christoph Hellwig
• [PATCH 10/22] input: remove sh_keysc
  • From: Christoph Hellwig
• [PATCH 12/22] net/ethernet/8390: remove stnic
  • From: Christoph Hellwig
• [PATCH 06/22] watchdog: remove the shwdt driver
  • From: Christoph Hellwig
• [PATCH 04/22] sound: remove sound/sh
  • From: Christoph Hellwig
• [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
  • From: Christoph Hellwig
• remove arch/sh
  • From: Christoph Hellwig
• [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Christoph Hellwig
• [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Christoph Hellwig
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• Re: [PATCH] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: Sergey Senozhatsky
• Re: [PATCH v6] serial: linflexuart: Remove redundant uart type assignment
  • From: Greg KH
• [PATCH v5] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Johan Hovold
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Johan Hovold
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v2] serial: atmel: fix incorrect baudrate setup
  • From: Richard Genoud
• [PATCH v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: John Ogness
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: Petr Mladek
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH 5.15 08/10] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
  • From: Greg Kroah-Hartman
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Johan Hovold
• Re: [PATCH 5.10 1/2] fsl_lpuart: Don't enable interrupts too early
  • From: Greg Kroah-Hartman
• Re: [PATCH 5.15.y v2] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Heikki Krogerus
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH 09/11] tty: vt: separate array juggling to juggle_array()
  • From: Ilpo Järvinen
• Re: [PATCH 10/11] tty: vt: saner names for more scroll variables
  • From: Ilpo Järvinen
• Re: [PATCH 11/11] tty: vt: cache row count in con_scroll()
  • From: Ilpo Järvinen
• Re: [PATCH 08/11] tty: vt: simplify some unicode conditions
  • From: Ilpo Järvinen
• Re: [PATCH 07/11] tty: vt: replace BUG_ON() by WARN_ON_ONCE()
  • From: Ilpo Järvinen
• Re: [PATCH 06/11] tty: vt: remove struct uni_screen
  • From: Ilpo Järvinen
• Re: [PATCH 05/11] tty: vt: remove char32_t typedef
  • From: Ilpo Järvinen
• Re: [PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA
  • From: Greg Kroah-Hartman
• Re: [PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA
  • From: Bartosz Golaszewski
• Re: [PATCH 04/11] tty: vt: use sizeof(*variable) where possible
  • From: Ilpo Järvinen
• Re: [PATCH 05/11] tty: vt: remove char32_t typedef
  • From: Ilpo Järvinen
• Re: [PATCH 03/11] tty: vt: remove reference to undefined NO_VC_UNI_SCREEN
  • From: Ilpo Järvinen
• Re: [PATCH 01/11] tty: vt: remove vc_uniscr_debug_check()
  • From: Ilpo Järvinen
• Re: [PATCH 02/11] tty: vt: drop get_vc_uniscr()
  • From: Ilpo Järvinen
• [PATCH 09/11] tty: vt: separate array juggling to juggle_array()
  • From: Jiri Slaby (SUSE)
• [PATCH 11/11] tty: vt: cache row count in con_scroll()
  • From: Jiri Slaby (SUSE)
• [PATCH 10/11] tty: vt: saner names for more scroll variables
  • From: Jiri Slaby (SUSE)
• [PATCH 08/11] tty: vt: simplify some unicode conditions
  • From: Jiri Slaby (SUSE)
• [PATCH 07/11] tty: vt: replace BUG_ON() by WARN_ON_ONCE()
  • From: Jiri Slaby (SUSE)
• [PATCH 05/11] tty: vt: remove char32_t typedef
  • From: Jiri Slaby (SUSE)
• [PATCH 06/11] tty: vt: remove struct uni_screen
  • From: Jiri Slaby (SUSE)
• [PATCH 04/11] tty: vt: use sizeof(*variable) where possible
  • From: Jiri Slaby (SUSE)
• [PATCH 03/11] tty: vt: remove reference to undefined NO_VC_UNI_SCREEN
  • From: Jiri Slaby (SUSE)
• [PATCH 01/11] tty: vt: remove vc_uniscr_debug_check()
  • From: Jiri Slaby (SUSE)
• [PATCH 02/11] tty: vt: drop get_vc_uniscr()
  • From: Jiri Slaby (SUSE)
• Re: [PATCH v3 06/13] tty: Convert ->carrier_raised() and callchains to bool
  • From: Johan Hovold
• Re: [PATCH v3 10/13] tty: Return bool from tty_termios_hw_change()
  • From: Johan Hovold
• Re: [PATCH v3 07/13] tty: Convert ->dtr_rts() to take bool argument
  • From: Johan Hovold
• Re: [PATCH v3 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active
  • From: Johan Hovold
• Re: [PATCH v3 13/13] usb/serial: Rename dtr/rts parameters/variables to active
  • From: Johan Hovold
• Re: [PATCH v3 11/13] tty/serial: Call ->dtr_rts() parameter active consistently
  • From: Johan Hovold
• Re: [PATCH] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: Petr Mladek
• [PATCH] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
  • From: John Ogness
• [PATCH v3 06/13] tty: Convert ->carrier_raised() and callchains to bool
  • From: Ilpo Järvinen
• [PATCH v3 13/13] usb/serial: Rename dtr/rts parameters/variables to active
  • From: Ilpo Järvinen
• [PATCH v3 09/13] serial: Make uart_handle_cts_change() status param bool active
  • From: Ilpo Järvinen
• [PATCH v3 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active
  • From: Ilpo Järvinen
• [PATCH v3 11/13] tty/serial: Call ->dtr_rts() parameter active consistently
  • From: Ilpo Järvinen
• [PATCH v3 07/13] tty: Convert ->dtr_rts() to take bool argument
  • From: Ilpo Järvinen
• [PATCH v3 12/13] tty: moxa: Rename dtr/rts parameters/variables to active
  • From: Ilpo Järvinen
• [PATCH v3 10/13] tty: Return bool from tty_termios_hw_change()
  • From: Ilpo Järvinen
• [PATCH v3 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Ilpo Järvinen
• [PATCH v3 04/13] tty: moxa: Make local var storing tty_port_initialized() bool
  • From: Ilpo Järvinen
• [PATCH v3 03/13] tty: Cleanup tty_port_set_active() bool parameter
  • From: Ilpo Järvinen
• [PATCH v3 02/13] tty: Cleamup tty_port_set_suspended() bool parameter
  • From: Ilpo Järvinen
• [PATCH v3 01/13] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Ilpo Järvinen
• [PATCH v3 00/13] tty/serial: bool conversions and cleanups
  • From: Ilpo Järvinen
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Alexandre Belloni
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Vinod Koul
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Wolfram Sang
• [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 12/13] tty: moxa: Rename dtr/rts parameters/variables to active
  • From: Jiri Slaby
• Re: [PATCH v2 11/13] tty/serial: Call ->dtr_rts() parameter active consistently
  • From: Jiri Slaby
• Re: [PATCH v2 10/13] tty: Return bool from tty_termios_hw_change()
  • From: Jiri Slaby
• Re: [PATCH v2 09/13] serial: Make uart_handle_cts_change() status param bool active
  • From: Jiri Slaby
• Re: [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Jiri Slaby
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• Re: [PATCH v10 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Ard Biesheuvel
• Re: [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Ard Biesheuvel
• [PATCH v4] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• [PATCH v2 12/13] tty: moxa: Rename dtr/rts parameters/variables to active
  • From: Ilpo Järvinen
• [PATCH v2 13/13] usb/serial: Rename dtr/rts parameters/variables to active
  • From: Ilpo Järvinen
• [PATCH v2 11/13] tty/serial: Call ->dtr_rts() parameter active consistently
  • From: Ilpo Järvinen
• [PATCH v2 10/13] tty: Return bool from tty_termios_hw_change()
  • From: Ilpo Järvinen
• [PATCH v2 09/13] serial: Make uart_handle_cts_change() status param bool active
  • From: Ilpo Järvinen
• [PATCH v2 01/13] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Ilpo Järvinen
• [PATCH v2 02/13] tty: Cleamup tty_port_set_suspended() bool parameter
  • From: Ilpo Järvinen
• [PATCH v2 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active
  • From: Ilpo Järvinen
• [PATCH v2 07/13] tty: Convert ->dtr_rts() to take bool argument
  • From: Ilpo Järvinen
• [PATCH v2 04/13] tty: moxa: Make local var storing tty_port_initialized() bool
  • From: Ilpo Järvinen
• [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Ilpo Järvinen
• [PATCH v2 03/13] tty: Cleanup tty_port_set_active() bool parameter
  • From: Ilpo Järvinen
• [PATCH v2 06/13] tty: Convert ->carrier_raised() and callchains to bool
  • From: Ilpo Järvinen
• [PATCH v2 00/13] tty/serial: bool conversions and cleanups
  • From: Ilpo Järvinen
• Re: [PATCH v10 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Andy Shevchenko
• Re: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Deepak R Varma
• RE: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Reshetova, Elena
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Deepak R Varma
• [PATCH v10 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v10 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH v10 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v10 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v9 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v9 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH] serial: msm: add lock annotation to msm_set_baud_rate()
  • From: Krzysztof Kozlowski
• Re: [PATCH v9 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Tom Rix
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Sebastian Andrzej Siewior
• Re: [niks:has_ioport_v3] [tty] aa0652d7f1: BUG:kernel_NULL_pointer_dereference,address
  • From: Niklas Schnelle
• [PATCH v2] serial: atmel: fix incorrect baudrate setup
  • From: Tobias Schramm
• Re: [PATCH] serial: atmel: fix incorrect baudrate setup
  • From: Tobias Schramm
• [PATCH] serial: atmel: fix incorrect baudrate setup
  • From: Tobias Schramm
• Re: [PATCH] serial: atmel: fix incorrect baudrate setup
  • From: Greg Kroah-Hartman
• Re: [PATCH v9 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• [PATCH] serial: amba-pl011: fix high priority character transmission in rs486 mode
  • From: Lino Sanfilippo
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Johan Hovold
• Re: [PATCH v2 3/3] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
  • From: Jiri Slaby
• Re: [PATCH v2 1/3] serial: 8250: RT288x/Au1xxx code away from core
  • From: Jiri Slaby
• Re: [PATCH v6] serial: linflexuart: Remove redundant uart type assignment
  • From: Jiri Slaby
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• [PATCH v6] serial: linflexuart: Remove redundant uart type assignment
  • From: 李哲
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Valentin CARON
• [PATCH v2 2/3] serial: 8250_rt288x: Name non-standard divisor latch reg
  • From: Ilpo Järvinen
• [PATCH v2 1/3] serial: 8250: RT288x/Au1xxx code away from core
  • From: Ilpo Järvinen
• [PATCH v2 3/3] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
  • From: Ilpo Järvinen
• [PATCH v2 0/3] serial: Separate RT288x/Au1xxx code into own file
  • From: Ilpo Järvinen
• Re: Re: Re: [PATCH v4] serial: linflexuart: remove redundant uart type assignment
  • From: Greg KH
• Re: [PATCH 10/10] tty: Return bool from tty_termios_hw_change()
  • From: Johan Hovold
• Re: [PATCH 09/10] serial: Make uart_handle_cts_change() status param bool
  • From: Johan Hovold
• Re: [PATCH 08/10] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool
  • From: Rodolfo Giometti
• Re: [PATCH 05/10] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Johan Hovold
• Re: [PATCH 09/10] serial: Make uart_handle_cts_change() status param bool
  • From: Ilpo Järvinen
• Re: [PATCH 07/10] tty: Convert ->dtr_rts() to take bool argument
  • From: Ilpo Järvinen
• Re: [PATCH 05/10] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Ilpo Järvinen
• Re: [niks:has_ioport_v3] [tty] aa0652d7f1: BUG:kernel_NULL_pointer_dereference,address
  • From: Arnd Bergmann
• Re: [PATCH 01/10] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Samuel Iglesias Gonsálvez
• Re: [PATCH v5] serial: linflexuart: remove redundant uart type assignment
  • From: Jiri Slaby
• Re: [PATCH 10/10] tty: Return bool from tty_termios_hw_change()
  • From: Jiri Slaby
• Re: [PATCH 09/10] serial: Make uart_handle_cts_change() status param bool
  • From: Jiri Slaby
• Re: [PATCH 08/10] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool
  • From: Jiri Slaby
• Re: [PATCH 07/10] tty: Convert ->dtr_rts() to take bool argument
  • From: Jiri Slaby
• Re: [PATCH 06/10] tty: Convert ->carrier_raised() and callchains to bool
  • From: Jiri Slaby
• Re: [PATCH 05/10] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Jiri Slaby
• Re: [PATCH 03/10] tty: Cleanup tty_port_set_active() bool parameter
  • From: Jiri Slaby
• Re: [PATCH 04/10] tty: moxa: Make local var storing tty_port_initialized() bool
  • From: Jiri Slaby
• Re: [PATCH 02/10] tty: Cleamup tty_port_set_suspended() bool parameter
  • From: Jiri Slaby
• Re: [PATCH 01/10] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Jiri Slaby
• [PATCH v9 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH v9 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v9 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v9 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v9 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• Re: Re: [PATCH v4] serial: linflexuart: remove redundant uart type assignment
  • From: Greg KH
• Re: [PATCH v4] serial: linflexuart: remove redundant uart type assignment
  • From: Greg KH
• [PATCH v4] serial: linflexuart: remove redundant uart type assignment
  • From: lizhe
• [PATCH 06/10] tty: Convert ->carrier_raised() and callchains to bool
  • From: Ilpo Järvinen
• [PATCH 09/10] serial: Make uart_handle_cts_change() status param bool
  • From: Ilpo Järvinen
• [PATCH 10/10] tty: Return bool from tty_termios_hw_change()
  • From: Ilpo Järvinen
• [PATCH 08/10] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool
  • From: Ilpo Järvinen
• [PATCH 07/10] tty: Convert ->dtr_rts() to take bool argument
  • From: Ilpo Järvinen
• [PATCH 01/10] tty: Cleanup tty_port_set_initialized() bool parameter
  • From: Ilpo Järvinen
• [PATCH 02/10] tty: Cleamup tty_port_set_suspended() bool parameter
  • From: Ilpo Järvinen
• [PATCH 03/10] tty: Cleanup tty_port_set_active() bool parameter
  • From: Ilpo Järvinen
• [PATCH 05/10] serial: Convert uart_{,port_}startup() init_hw param to bool
  • From: Ilpo Järvinen
• [PATCH 04/10] tty: moxa: Make local var storing tty_port_initialized() bool
  • From: Ilpo Järvinen
• [PATCH 00/10] tty/serial: bool conversions and cleanups
  • From: Ilpo Järvinen
• Re: [PATCH v3] serial: linflexuart: remove redundant uart type PORT_LINFLEXUART
  • From: Ilpo Järvinen
• [PATCH v3] serial: linflexuart: remove redundant uart type PORT_LINFLEXUART
  • From: lizhe
• Re: [PATCH v4 2/2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Deepak R Varma
• Re: [PATCH v2 6/9] riscv: dts: bouffalolab: add the bl808 SoC base device tree
  • From: Michael Walle
• Re: [PATCH v4 2/2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v2] serial: linflexuart: remove redundant uart type _assignment_
  • From: Ilpo Järvinen
• [PATCH v2] serial: linflexuart: remove redundant uart type _assignment_
  • From: lizhe
• Re: [PATCH v1] drivers/fsl_linflexuart.c : remove redundant uart type
  • From: Jiri Slaby
• [PATCH v1] drivers/fsl_linflexuart.c : remove redundant uart type
  • From: lizhe
• Re: [PATCH v4 2/2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Deepak R Varma
• [PATCH 1/1] serial: pch_uart: Pass correct sg to dma_unmap_sg()
  • From: Ilpo Järvinen
• Re: [PATCH v4 2/2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Jiri Slaby
• Re: [PATCH v4 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Jiri Slaby
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v2] hid-ft260: Add serial driver
  • From: Ilpo Järvinen
• [PATCH v2] hid-ft260: Add serial driver
  • From: Christina Quast
• [PATCH] serial: sccnxp: Use devm_clk_get_enabled() helper
  • From: Christophe JAILLET
• Re: [PATCH 3/3] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
  • From: Philippe Mathieu-Daudé
• Re: [PATCH 2/3] serial: 8250_rt288x: Name non-standard divisor latch reg
  • From: Philippe Mathieu-Daudé
• [PATCH 3/3] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
  • From: Ilpo Järvinen
• [PATCH 2/3] serial: 8250_rt288x: Name non-standard divisor latch reg
  • From: Ilpo Järvinen
• [PATCH 1/3] serial: 8250: RT288x/Au1xxx code away from core
  • From: Ilpo Järvinen
• [PATCH 0/3] serial: Separate RT288x/Au1xxx code into own file
  • From: Ilpo Järvinen
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v8 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v8 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: Palmer Dabbelt
• [RESEND PATCH 2/2] tty: serial: qcom-geni-serial: use devres for uart port management
  • From: Bartosz Golaszewski
• [RESEND PATCH 1/2] tty: serial: provide devm_uart_add_one_port()
  • From: Bartosz Golaszewski
• [RESEND PATCH 0/2] tty: serial: add and use a managed variant of uart_add_one_port()
  • From: Bartosz Golaszewski
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Tom Rix
• [PATCH v6 09/14] tty: serial: qcom-geni-serial: split out the FIFO tx code
  • From: Bartosz Golaszewski
• [PATCH v6 02/14] tty: serial: qcom-geni-serial: drop unneeded forward definitions
  • From: Bartosz Golaszewski
• [PATCH v6 05/14] tty: serial: qcom-geni-serial: improve the to_dev_port() macro
  • From: Bartosz Golaszewski
• [PATCH v6 04/14] tty: serial: qcom-geni-serial: align #define values
  • From: Bartosz Golaszewski
• [PATCH v6 14/14] tty: serial: qcom-geni-serial: add support for serial engine DMA
  • From: Bartosz Golaszewski
• [PATCH v6 08/14] tty: serial: qcom-geni-serial: remove unneeded tabs
  • From: Bartosz Golaszewski
• [PATCH v6 13/14] soc: qcom-geni-se: add more symbol definitions
  • From: Bartosz Golaszewski
• [PATCH v6 10/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()
  • From: Bartosz Golaszewski
• [PATCH v6 07/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()
  • From: Bartosz Golaszewski
• [PATCH v6 11/14] tty: serial: qcom-geni-serial: drop the return value from handle_rx
  • From: Bartosz Golaszewski
• [PATCH v6 06/14] tty: serial: qcom-geni-serial: remove stray newlines
  • From: Bartosz Golaszewski
• [PATCH v6 12/14] tty: serial: qcom-geni-serial: use of_device_id data
  • From: Bartosz Golaszewski
• [PATCH v6 03/14] tty: serial: qcom-geni-serial: remove unused symbols
  • From: Bartosz Golaszewski
• [PATCH v6 01/14] tty: serial: qcom-geni-serial: stop operations in progress at shutdown
  • From: Bartosz Golaszewski
• [PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA
  • From: Bartosz Golaszewski
• Re: [PATCH v8 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Tom Rix
• Re: [PATCH v8 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Andy Shevchenko
• Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• [PATCH v8 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• [PATCH v8 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v8 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v8 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Andy Shevchenko
• Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Johan Hovold
• Re: [PATCH tty-next v2 3/3] hid-ft260: Change u8 to __u8 for hw facing structs
  • From: Johan Hovold
• Re: [PATCH tty-next v2 3/3] hid-ft260: Change u8 to __u8 for hw facing structs
  • From: Johan Hovold
• Re: [PATCH tty-next v2 1/3] hid-ft260: Cleanup macro formatting
  • From: Greg KH
• Re: [PATCH tty-next v2 1/3] hid-ft260: Cleanup macro formatting
  • From: Ilpo Järvinen
• [PATCH tty-next v2 3/3] hid-ft260: Change u8 to __u8 for hw facing structs
  • From: Christina Quast
• [PATCH tty-next v2 2/3] hid-ft260: Rename struct ft260_i2c_input_report
  • From: Christina Quast
• [PATCH tty-next v2 1/3] hid-ft260: Cleanup macro formatting
  • From: Christina Quast
• [PATCH tty-next v2 0/3] hid-ft260 cleanups
  • From: Christina Quast
• Re: [PATCH] earlycon: Fix compile error when SERIAL_CORE is m
  • From: Thorsten Leemhuis
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• serial: imx: doubtful code?
  • From: Sergey Organov
• [PATCH v2] tty: serial: zs: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• [PATCH 2/2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• [PATCH v3 1/2] tty: serial: dz: convert atomic_* to refcount_* APIs for map_guard
  • From: Deepak R Varma
• [PATCH v3 0/2] tty: serial: dz: convert atomic_* to refcount_*
  • From: Deepak R Varma
• Re: [PATCH v2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• Re: [PATCH v2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Greg Kroah-Hartman
• [PATCH v2] tty: serial: dz: convert atomic_* to refcount_* APIs for irq_guard
  • From: Deepak R Varma
• [PATCH v2] tty: serial: dz: convert atomic_* to refcount_* APIs
  • From: Deepak R Varma
• Re: [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Markuss Broks
• Re: [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Ard Biesheuvel
• Re: [PATCH] hid-ft260: add UART support.
  • From: Johan Hovold
• Re: [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: Bin Meng
• [PATCH 5.10 2/2] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
  • From: Dominique Martinet
• [PATCH 5.10 1/2] fsl_lpuart: Don't enable interrupts too early
  • From: Dominique Martinet
• Re: [PATCH 5.15.y v2] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
  • From: Dominique Martinet
• RE: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to eight
  • From: Sherry Sun
• Re: [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: Sergey Matyukevich
• [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to eight
  • From: Nate Drude
• Re: [PATCH] tty: serial: convert atomic_* to refcount_* APIs
  • From: Deepak R Varma
• [PATCH 5.15.y v2] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
  • From: Rasmus Villemoes
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: Ilpo Järvinen
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: Richard Leitner
• Re: [PATCH] tty: serial: convert atomic_* to refcount_* APIs
  • From: Greg Kroah-Hartman
• Re: [PATCH V1 1/1] Serial: core: Add compat ioctl support
  • From: Greg KH
• [PATCH V1 1/1] Serial: core: Add compat ioctl support
  • From: Viken Dadhaniya
• Re: [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Marco Pagani
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• Re: [PATCH 1/2] serdev: ttyport: fix use-after-free on closed TTY
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] serdev: ttyport: fix use-after-free on closed TTY
  • From: Krzysztof Kozlowski
• Re: [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Marco Pagani
• Re: [PATCH v7 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v2] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serdev: ttyport: fix use-after-free on closed TTY
  • From: Greg Kroah-Hartman
• [PATCH 2/2] Bluetooth: hci_qca: Fix driver shutdown on closed serdev
  • From: Krzysztof Kozlowski
• [PATCH 1/2] serdev: ttyport: fix use-after-free on closed TTY
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: gregkh
• Re: [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: Bin Meng
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: Ilpo Järvinen
• [PATCH v3 3/3] efi: earlycon: Add support for generic framebuffers
  • From: Markuss Broks
• [PATCH v3 2/3] efi: earlycon: move to video/console to prepare for changes
  • From: Markuss Broks
• [PATCH v3 1/3] drivers: serial: earlycon: Pass device-tree node
  • From: Markuss Broks
• [PATCH v3 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Markuss Broks
• Re: [PATCH] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
  • From: Jiri Slaby
• Re: [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Andy Shevchenko
• Re: [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v7 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: Andy Shevchenko
• Re: [PATCH v7 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Andy Shevchenko
• [PATCH v7 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v7 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• [PATCH v7 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v7 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v7 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
  • From: Krzysztof Kozlowski
• Re: [PATCH v5 12/14] tty: serial: qcom-geni-serial: stop operations in progress at shutdown
  • From: Krzysztof Kozlowski
• [PATCH 5.15.y] tty: serial: fsl_lpuart: fixup error path in lpuart_probe()
  • From: Rasmus Villemoes
• Re: [PATCH v10 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• [PATCH v10 tty-next 4/4] serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  • From: Kumaravel Thiagarajan
• [PATCH v10 tty-next 3/4] serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  • From: Kumaravel Thiagarajan
• [PATCH v10 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Kumaravel Thiagarajan
• [PATCH v10 tty-next 1/4] serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  • From: Kumaravel Thiagarajan
• [PATCH v10 tty-next 0/4] serial: 8250_pci1xxxx: Add driver for the pci1xxxx's quad-uart function
  • From: Kumaravel Thiagarajan
• Re: [PATCH v2] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: serial: imx: sudden rx flood: hardware bug?
  • From: Sergey Organov
• Re: [PATCH v2] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Sebastian Andrzej Siewior
• Re: [GIT PULL] TTY/Serial driver changes for 6.2-rc1
  • From: pr-tracker-bot
• Re: [PATCH] tty: serial: qcom_geni: avoid duplicate struct member init
  • From: Doug Anderson
• Re: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH v2] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH] tty: serial: qcom_geni: avoid duplicate struct member init
  • From: Arnd Bergmann
• RE: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• Re: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• RE: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• [GIT PULL] TTY/Serial driver changes for 6.2-rc1
  • From: Greg KH
• Re: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Sebastian Andrzej Siewior
• RE: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• [PATCH v2] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  • From: Marek Vasut
• Re: [PATCH] serial: stm32: Move hard IRQ handling to threaded interrupt context
  • From: Marek Vasut
• Re: serial: imx: sudden rx flood: hardware bug?
  • From: Fabio Estevam
• Re: serial: imx: sudden rx flood: hardware bug?
  • From: Fabio Estevam
• Re: [PATCH] tty: serial: qcom_geni: avoid duplicate struct member init
  • From: Doug Anderson
• Re: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• Re: [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• [PATCH] tty: serial: qcom_geni: avoid duplicate struct member init
  • From: Arnd Bergmann
• [PATCH v9 tty-next 4/4] serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  • From: Kumaravel Thiagarajan
• Re: [PATCH] serial: stm32: Move hard IRQ handling to threaded interrupt context
  • From: Valentin CARON
• [PATCH v9 tty-next 3/4] serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  • From: Kumaravel Thiagarajan
• [PATCH v9 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Kumaravel Thiagarajan
• [PATCH v9 tty-next 1/4] serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  • From: Kumaravel Thiagarajan
• [PATCH v9 tty-next 0/4] serial: 8250_pci1xxxx: Add driver for the pci1xxxx's quad-uart function
  • From: Kumaravel Thiagarajan
• RE: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• RE: [PATCH V3 0/3] fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown()
  • From: Sherry Sun
• Re: [PATCH V3 0/3] fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown()
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH 2/3] tty: serial: fsl_lpuart: disable the break condition when shutdown the uart port
  • From: Sherry Sun
• [PATCH 3/3] tty: serial: imx: disable the break condition when shutdown the uart port
  • From: Sherry Sun
• [PATCH 1/3] tty: serial: fsl_lpuart: disable the CTS when send break signal
  • From: Sherry Sun
• [PATCH 0/3] tty: serial: fsl_lpuart/imx: improve the TX break settings
  • From: Sherry Sun
• RE: [PATCH V3 0/3] fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown()
  • From: Sherry Sun
• Re: [PATCH v6 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• Re: [PATCH v6 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v6 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• Re: [PATCH] serial: arc_uart: Drop empty platform remove function
  • From: Ilpo Järvinen
• Re: [PATCH v6 3/4] fpga: dfl: add basic support for DFHv1
  • From: Xu Yilun
• [PATCH] serial: arc_uart: Drop empty platform remove function
  • From: Uwe Kleine-König
• RE: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss
• Re: [PATCH v3 1/2] earlycon: Let users set the clock frequency
  • From: Greg Kroah-Hartman
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Ilpo Järvinen
• Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Jiri Slaby
• RE: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Andy Shevchenko
• [PATCH v8 tty-next 4/4] serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  • From: Kumaravel Thiagarajan
• [PATCH v8 tty-next 3/4] serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  • From: Kumaravel Thiagarajan
• [PATCH v8 tty-next 1/4] serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  • From: Kumaravel Thiagarajan
• [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Kumaravel Thiagarajan
• [PATCH v8 tty-next 0/4] serial: 8250_pci1xxxx: Add driver for the pci1xxxx's quad-uart function
  • From: Kumaravel Thiagarajan
• RE: [PATCH v7 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support
  • From: Tharunkumar.Pasumarthi
• Re: [PATCH v6 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Bagas Sanjaya
• [PATCH v6 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v6 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH v6 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v6 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v6 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• [PATCH v3 2/3] riscv: Implement semihost.h for earlycon semihost driver
  • From: Bin Meng
• [PATCH v3 3/3] serial: Rename earlycon semihost driver
  • From: Bin Meng
• [PATCH v3 0/3] serial: Add RISC-V support to the earlycon semihost driver
  • From: Bin Meng
• [PATCH v3 1/3] serial: earlycon-arm-semihost: Move smh_putc() variants in respective arch's semihost.h
  • From: Bin Meng
• [PATCH 1/2] tty: serial: provide devm_uart_add_one_port()
  • From: Bartosz Golaszewski
• [PATCH 2/2] tty: serial: qcom-geni-serial: use devres for uart port management
  • From: Bartosz Golaszewski
• [PATCH 0/2] tty: serial: add and use a managed variant of uart_add_one_port()
  • From: Bartosz Golaszewski
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss
• [PATCH v5 3/4] fpga: dfl: add basic support for DFHv1
  • From: matthew . gerlach
• [PATCH v5 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v5 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v5 2/4] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v5 0/4] Enhance definition of DFH and use enhancements for UART driver
  • From: matthew . gerlach
• Re: [PATCH] serial: stm32: Move hard IRQ handling to threaded interrupt context
  • From: Marek Vasut
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Ilpo Järvinen
• Re: [PATCH] serial: stm32: Move hard IRQ handling to threaded interrupt context
  • From: Valentin CARON
• Re: [RFC PATCH v4 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: [PATCH] hid-ft260: add UART support.
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/3] serial: earlycon-arm-semihost: Move smh_putc() variants in respective arch's semihost.h
  • From: Jiri Slaby
• Re: [PATCH v2 1/3] serial: earlycon-arm-semihost: Move smh_putc() variants in respective arch's semihost.h
  • From: Bin Meng