Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.
Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.
Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Tested-by: Valentin Caron <valentin.caron@xxxxxxxxxxx> # V3
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jirislaby@xxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Valentin Caron <valentin.caron@xxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
To: linux-serial@xxxxxxxxxxxxxxx
---
V2: - Update patch subject, was:
serial: stm32: Move hard IRQ handling to threaded interrupt context
- Use request_irq() instead, rename the IRQ handler function
V3: - Update the commit message per suggestion from Sebastian
- Add RB from Sebastian
- Add Fixes tag
V4: - Remove uart_console() deadlock check from
stm32_usart_of_dma_rx_probe()
- Use plain spin_lock()/spin_unlock() instead of the
_irqsave/_irqrestore variants in IRQ handler
- Add TB from Valentin
V5: - Add CC stable@
- Do not move the sr variable, removes one useless hunk from the patch
---
drivers/tty/serial/stm32-usart.c | 31 ++++---------------------------
1 file changed, 4 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index a1490033aa164..1e24bee2b0ef7 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -797,23 +797,9 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
spin_unlock(&port->lock);
}
- if (stm32_usart_rx_dma_enabled(port))
- return IRQ_WAKE_THREAD;
- else
- return IRQ_HANDLED;
-}
-
-static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr)
-{
- struct uart_port *port = ptr;
- struct tty_port *tport = &port->state->port;
- struct stm32_port *stm32_port = to_stm32_port(port);
- unsigned int size;
- unsigned long flags;
-
/* Receiver timeout irq for DMA RX */
- if (!stm32_port->throttled) {
- spin_lock_irqsave(&port->lock, flags);
+ if (stm32_usart_rx_dma_enabled(port) && !stm32_port->throttled) {
+ spin_lock(&port->lock);
size = stm32_usart_receive_chars(port, false);
uart_unlock_and_check_sysrq_irqrestore(port, flags);
if (size)
@@ -1015,10 +1001,8 @@ static int stm32_usart_startup(struct uart_port *port)
u32 val;
int ret;
- ret = request_threaded_irq(port->irq, stm32_usart_interrupt,
- stm32_usart_threaded_interrupt,
- IRQF_ONESHOT | IRQF_NO_SUSPEND,
- name, port);
+ ret = request_irq(port->irq, stm32_usart_interrupt,
+ IRQF_NO_SUSPEND, name, port);
if (ret)
return ret;
@@ -1601,13 +1585,6 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port,
struct dma_slave_config config;
int ret;
- /*
- * Using DMA and threaded handler for the console could lead to
- * deadlocks.
- */
- if (uart_console(port))
- return -ENODEV;
-
stm32port->rx_buf = dma_alloc_coherent(dev, RX_BUF_L,
&stm32port->rx_dma_buf,
GFP_KERNEL);
--
2.39.0
