Linux SCSI Development

• Date Index

• [PATCH v2 net-next 09/11] Revert "scsi: qedi: Allocate IRQs based on msix_cnt", (continued)
  • [PATCH v2 net-next 09/11] Revert "scsi: qedi: Allocate IRQs based on msix_cnt", Michal Kalderon
  • [PATCH v2 net-next 08/11] qed*: Add iWARP 100g support, Michal Kalderon
  • [PATCH v2 net-next 11/11] qedf: Use hwfns and affin_hwfn_idx to get MSI-X vector index to use, Michal Kalderon
  • [PATCH v2 net-next 10/11] qedi: Use hwfns and affin_hwfn_idx to get MSI-X vector index, Michal Kalderon
  • [PATCH v2 net-next 06/11] qed: Set the doorbell address correctly, Michal Kalderon
  • [PATCH v2 net-next 05/11] qedr: Change the MSI-X vectors selection to be based on affined engine, Michal Kalderon
  • Re: [PATCH v2 net-next 00/11] qed*: Improve performance on 100G link for offload protocols, David Miller
• [PATCH] target/iscsi: fix possible condition with no effect (if == else), Hariprasad Kelam
  • Re: [PATCH] target/iscsi: fix possible condition with no effect (if == else), David Disseldorp
• [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'host' and 'wait_time', YueHaibing
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'host' and 'wait_time', Sumit Saxena
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'host' and 'wait_time', Martin K. Petersen
• [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'buff_addr' and 'ci_h', YueHaibing
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'buff_addr' and 'ci_h', Sumit Saxena
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variables 'buff_addr' and 'ci_h', Martin K. Petersen
• [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'cur_state', YueHaibing
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'cur_state', Sumit Saxena
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'cur_state', Martin K. Petersen
• [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'sge_sz', YueHaibing
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'sge_sz', Sumit Saxena
  • Re: [PATCH -next] scsi: megaraid_sas: remove set but not used variable 'sge_sz', Martin K. Petersen
• [PATCH] drivers/scsi: fix warning PTR_ERR_OR_ZERO can be used, Hariprasad Kelam
  • Re: [PATCH] drivers/scsi: fix warning PTR_ERR_OR_ZERO can be used, Bart Van Assche
• [GIT PULL] SCSI fixes for 5.2-rc1, James Bottomley
  • Re: [GIT PULL] SCSI fixes for 5.2-rc1, pr-tracker-bot
  • <Possible follow-ups>
  • [GIT PULL] SCSI fixes for 5.2-rc1, James Bottomley
    • Re: [GIT PULL] SCSI fixes for 5.2-rc1, pr-tracker-bot
• [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Douglas Gilbert
  • [PATCH 01/19] sg: move functions around, Douglas Gilbert
    • Re: [PATCH 01/19] sg: move functions around, Bart Van Assche
      • Re: [PATCH 01/19] sg: move functions around, Douglas Gilbert
  • [PATCH 03/19] sg: sg_log and is_enabled, Douglas Gilbert
    • Re: [PATCH 03/19] sg: sg_log and is_enabled, Bart Van Assche
  • [PATCH 02/19] sg: remove typedefs, type+formatting cleanup, Douglas Gilbert
    • Re: [PATCH 02/19] sg: remove typedefs, type+formatting cleanup, Bart Van Assche
  • [PATCH 06/19] sg: sense buffer cleanup, Douglas Gilbert
    • Re: [PATCH 06/19] sg: sense buffer cleanup, Bart Van Assche
  • [PATCH 04/19] sg: move header to uapi section, Douglas Gilbert
  • [PATCH 08/19] sg: add 8 byte SCSI LUN to sg_scsi_id, Douglas Gilbert
  • [PATCH 07/19] sg: add sg v4 interface support, Douglas Gilbert
    • Re: [PATCH 07/19] sg: add sg v4 interface support, kbuild test robot
  • [PATCH 10/19] sg: add sg_ioabort ioctl, Douglas Gilbert
  • [PATCH 05/19] sg: replace rq array with lists, Douglas Gilbert
    • Re: [PATCH 05/19] sg: replace rq array with lists, kbuild test robot
      • Re: [PATCH 05/19] sg: replace rq array with lists, Douglas Gilbert
    • Re: [PATCH 05/19] sg: replace rq array with lists, kbuild test robot
    • Re: [PATCH 05/19] sg: replace rq array with lists, Dan Carpenter
    • Re: [PATCH 05/19] sg: replace rq array with lists, kbuild test robot
  • [PATCH 11/19] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls, Douglas Gilbert
  • [PATCH 09/19] sg: expand sg_comm_wr_t, Douglas Gilbert
  • [PATCH 13/19] sg: sgat_elem_sz and sum_fd_dlens, Douglas Gilbert
    • Re: [PATCH 13/19] sg: sgat_elem_sz and sum_fd_dlens, Dan Carpenter
  • [PATCH 12/19] sg: add sg_set_get_extended ioctl, Douglas Gilbert
  • [PATCH 14/19] sg: tag and more_async, Douglas Gilbert
    • Re: [PATCH 14/19] sg: tag and more_async, kbuild test robot
    • Re: [PATCH 14/19] sg: tag and more_async, kbuild test robot
      • Re: [PATCH 14/19] sg: tag and more_async, Douglas Gilbert
  • [PATCH 15/19] sg: add fd sharing , change, unshare, Douglas Gilbert
  • [PATCH 17/19] sg: add multiple request support, Douglas Gilbert
  • [PATCH 18/19] sg: add slave wait capability, Douglas Gilbert
  • [PATCH 19/19] sg: table of error numbers with meanings, Douglas Gilbert
  • [PATCH 16/19] sg: add shared requests, Douglas Gilbert
  • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Bart Van Assche
    • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Douglas Gilbert
      • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Bart Van Assche
  • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Bart Van Assche
    • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Douglas Gilbert
      • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Bart Van Assche
      • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Martin K. Petersen
        • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Douglas Gilbert
          • Re: [PATCH 00/19] sg: v4 interface, rq sharing + multiple rqs, Martin K. Petersen
• [PATCH 5.0 020/139] blk-mq: free hw queues resource in hctxs release handler, Greg Kroah-Hartman
• [PATCH 5.1 024/122] blk-mq: free hw queues resource in hctxs release handler, Greg Kroah-Hartman
• [PATCH RFT plinth/v4.15 11/12] blk-mq: Allow PCI vector offset for mapping queues, John Garry
  • Re: [PATCH RFT plinth/v4.15 11/12] blk-mq: Allow PCI vector offset for mapping queues, John Garry
• [PATCH 0/2] zfcp fixes for v5.2-rcX, Steffen Maier
  • [PATCH 1/2] zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove, Steffen Maier
  • [PATCH 2/2] zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs), Steffen Maier
  • Re: [PATCH 0/2] zfcp fixes for v5.2-rcX, Martin K. Petersen
• [PATCH] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask in pqi_pci_init(), Lianbo Jiang
  • Re: [PATCH] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask in pqi_pci_init(), Lendacky, Thomas
    • RE: [PATCH] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask in pqi_pci_init(), Don.Brace
      • Re: [PATCH] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask in pqi_pci_init(), lijiang
• SCSI adapter: how to freeze and thaw I/O on hibernation?, Dexuan Cui
  • Re: SCSI adapter: how to freeze and thaw I/O on hibernation?, Ming Lei
    • RE: SCSI adapter: how to freeze and thaw I/O on hibernation?, Dexuan Cui
• [PATCH] sg: Fix a double-fetch bug in drivers/scsi/sg.c, Gen Zhang
  • Re: [PATCH] sg: Fix a double-fetch bug in drivers/scsi/sg.c, Jiri Slaby
    • Re: [PATCH] sg: Fix a double-fetch bug in drivers/scsi/sg.c, Douglas Gilbert
      • Re: [PATCH] sg: Fix a double-fetch bug in drivers/scsi/sg.c, Gen Zhang
• [PATCH] scsi: hpsa: Avoid using dev uninitialized in hpsa_eh_device_reset_handler, Nathan Chancellor
• [PATCH AUTOSEL 5.1 020/375] blk-mq: grab .q_usage_counter when queuing request from plug code path, Sasha Levin
• [PATCH AUTOSEL 5.1 019/375] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Sasha Levin
• [PATCH AUTOSEL 5.1 051/375] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path, Sasha Levin
• [PATCH AUTOSEL 5.1 052/375] scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending(), Sasha Levin
• [PATCH AUTOSEL 5.1 053/375] scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session(), Sasha Levin
• [PATCH AUTOSEL 5.0 014/317] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Sasha Levin
• [PATCH AUTOSEL 5.0 015/317] blk-mq: grab .q_usage_counter when queuing request from plug code path, Sasha Levin
• [PATCH AUTOSEL 5.0 044/317] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path, Sasha Levin
• [PATCH AUTOSEL 5.0 046/317] scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session(), Sasha Levin
• [PATCH AUTOSEL 4.19 038/244] scsi: qla2xxx: Fix hardirq-unsafe locking, Sasha Levin
• [PATCH AUTOSEL 4.19 036/244] scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending(), Sasha Levin
• [PATCH AUTOSEL 4.19 046/244] scsi: qedi: Abort ep termination if offload not scheduled, Sasha Levin
• [PATCH AUTOSEL 4.14 023/167] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path, Sasha Levin
• [PATCH AUTOSEL 4.14 024/167] scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending(), Sasha Levin
• [PATCH AUTOSEL 4.14 025/167] scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session(), Sasha Levin
• [PATCH AUTOSEL 4.14 031/167] scsi: qedi: Abort ep termination if offload not scheduled, Sasha Levin
• [PATCH AUTOSEL 4.9 015/114] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path, Sasha Levin
• [PATCH AUTOSEL 4.19 037/244] scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session(), Sasha Levin
• [PATCH AUTOSEL 4.19 035/244] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path, Sasha Levin
• [PATCH AUTOSEL 5.0 055/317] scsi: qedi: Abort ep termination if offload not scheduled, Sasha Levin
• [PATCH AUTOSEL 5.0 047/317] scsi: qla2xxx: Fix hardirq-unsafe locking, Sasha Levin
• [PATCH AUTOSEL 5.0 045/317] scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending(), Sasha Levin
• [PATCH AUTOSEL 5.1 063/375] scsi: qedi: Abort ep termination if offload not scheduled, Sasha Levin
• [PATCH AUTOSEL 5.1 054/375] scsi: qla2xxx: Fix hardirq-unsafe locking, Sasha Levin
• [PATCH v2] message/fusion/mptbase.c: Use kmemdup instead of memcpy and kmalloc, Bharath Vedartham
  • Re: [PATCH v2] message/fusion/mptbase.c: Use kmemdup instead of memcpy and kmalloc, Martin K. Petersen
• [PATCH] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route(), Varun Prakash
  • Re: [PATCH] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route(), Martin K. Petersen
• [PATCH] mpt3sas_ctl: Fix a double-fetch bug in drivers/scsi/mpt3sas/mpt3sas_ctl.c, Gen Zhang
• [PATCH] message/fusion/mptbase.c: Use kmemdup instead of memcpy and kmalloc, Bharath Vedartham
  • Re: [PATCH] message/fusion/mptbase.c: Use kmemdup instead of memcpy and kmalloc, Joe Perches
    • Re: [PATCH] message/fusion/mptbase.c: Use kmemdup instead of memcpy and kmalloc, Bharath Vedartham
• [PATCH][next] scsi: hpsa: fix an uninitialized read and dereference of pointer dev, Colin King
  • RE: [PATCH][next] scsi: hpsa: fix an uninitialized read and dereference of pointer dev, Don.Brace
  • Re: [PATCH][next] scsi: hpsa: fix an uninitialized read and dereference of pointer dev, Nathan Chancellor
  • Re: [PATCH][next] scsi: hpsa: fix an uninitialized read and dereference of pointer dev, Martin K. Petersen
• [PATCH 00/21] lpfc: Update lpfc to revision 12.2.0.3, James Smart
  • [PATCH 01/21] lpfc: Fix alloc context on oas lun creations, James Smart
  • [PATCH 02/21] lpfc: Fix nvmet target abort cmd matching, James Smart
  • [PATCH 03/21] lpfc: Correct nvmet buffer free race condition, James Smart
  • [PATCH 04/21] lpfc: Revise message when stuck due to unresponsive adapter, James Smart
  • [PATCH 07/21] lpfc: Revert message logging on unsupported topology, James Smart
  • [PATCH 06/21] lpfc: Fix nvmet handling of received ABTS for unmapped frames, James Smart
  • [PATCH 08/21] lpfc: Fix PT2PT PLOGI collison stopping discovery, James Smart
  • [PATCH 05/21] lpfc: Separate CQ processing for nvmet_fc upcalls, James Smart
  • [PATCH 09/21] lpfc: Prevent 'use after free' memory overwrite in nvmet LS handling., James Smart
  • [PATCH 10/21] lpfc: Cancel queued work for an IO when processing a received ABTS., James Smart
  • [PATCH 13/21] lpfc: Fix memory leak in abnormal exit path from lpfc_eq_create., James Smart
  • [PATCH 11/21] lpfc: Fix hardlockup in scsi_cmd_iocb_cmpl, James Smart
  • [PATCH 12/21] lpfc: Rework misleading nvme not supported in firmware message, James Smart
  • [PATCH 15/21] lpfc: Fix oops when driver is loaded with 1 interrupt vector, James Smart
  • [PATCH 14/21] lpfc: Fix incorrect logical link speed on trunks when links down, James Smart
  • [PATCH 17/21] lpfc: Fix fcp_rsp_len checking on lun reset, James Smart
  • [PATCH 16/21] lpfc: Fix poor use of hardware queues if fewer irq vectors, James Smart
  • [PATCH 18/21] lpfc: Fix FDMI fc4type for nvme support, James Smart
  • [PATCH 19/21] lpfc: Fix BFS crash with t10-dif enabled., James Smart
    • Re: [PATCH 19/21] lpfc: Fix BFS crash with t10-dif enabled., Ewan D. Milne
  • [PATCH 21/21] lpfc: Update lpfc version to 12.2.0.3, James Smart
  • [PATCH 20/21] lpfc: Fix kernel warnings related to smp_processor_id(), James Smart
  • Re: [PATCH 00/21] lpfc: Update lpfc to revision 12.2.0.3, Martin K. Petersen
• Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, John Garry
  • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, Ming Lei
    • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, John Garry
      • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, Hannes Reinecke
        • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, Ming Lei
        • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, John Garry
      • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, Ming Lei
        • Re: [PATCH] blk-mq: Wait for for hctx inflight requests on CPU unplug, John Garry
• [PATCH] scsi: ufs: Check that space was properly alloced in copy_query_response, Avri Altman
  • Re: [PATCH] scsi: ufs: Check that space was properly alloced in copy_query_response, Alim Akhtar
    • RE: [PATCH] scsi: ufs: Check that space was properly alloced in copy_query_response, Avri Altman
  • RE: [EXT] [PATCH] scsi: ufs: Check that space was properly alloced in copy_query_response, Bean Huo (beanhuo)
  • Re: [PATCH] scsi: ufs: Check that space was properly alloced in copy_query_response, Martin K. Petersen
• [PATCH v5 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Stanley Chu
  • [PATCH v5 3/3] scsi: ufs: Add error-handling of Auto-Hibernate, Stanley Chu
  • [PATCH v5 2/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Stanley Chu
  • [PATCH v5 1/3] scsi: ufs: Introduce ufshcd_is_auto_hibern8_supported(), Stanley Chu
  • RE: [PATCH v5 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Avri Altman
  • Re: [PATCH v5 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Martin K. Petersen
• [PATCH v4 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Stanley Chu
  • [PATCH v4 3/3] scsi: ufs: Add error-handling of Auto-Hibernate, Stanley Chu
  • [PATCH v4 2/3] scsi: ufs: Introduce ufshcd_is_auto_hibern8_supported(), Stanley Chu
    • RE: [PATCH v4 2/3] scsi: ufs: Introduce ufshcd_is_auto_hibern8_supported(), Avri Altman
      • RE: [PATCH v4 2/3] scsi: ufs: Introduce ufshcd_is_auto_hibern8_supported(), Stanley Chu
  • [PATCH v4 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Stanley Chu
• [PATCH v2] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), Jason Yan
  • Re: [PATCH v2] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), John Garry
  • Re: [PATCH v2] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), Martin K. Petersen
• [PATCH v2 00/10] mpt3sas: Aero/Sea HBA feature addition, Suganath Prabu S
  • [PATCH v2 01/10] mpt3sas: function pointers of request descriptor, Suganath Prabu S
  • [PATCH v2 02/10] mpt3sas: Add Atomic RequestDescriptor support on Aero, Suganath Prabu S
  • [PATCH v2 03/10] mpt3sas: Add flag high_iops_queues, Suganath Prabu S
  • [PATCH v2 04/10] mpt3sas: change _base_get_msix_index prototype, Suganath Prabu S
  • [PATCH v2 05/10] mpt3sas: Use highiops queues if more in-flights, Suganath Prabu S
  • [PATCH v2 06/10] mpt3sas:save msix index and use same while posting RD, Suganath Prabu S
    • Re: [PATCH v2 06/10] mpt3sas:save msix index and use same while posting RD, Martin K. Petersen
      • Re: [PATCH v2 06/10] mpt3sas:save msix index and use same while posting RD, Sreekanth Reddy
  • [PATCH v2 07/10] mpt3sas: Affinity high iops queues IRQs to local node, Suganath Prabu S
  • [PATCH v2 08/10] mpt3sas: Enable interrupt coalescing on high iops, Suganath Prabu S
    • Re: [PATCH v2 08/10] mpt3sas: Enable interrupt coalescing on high iops, Martin K. Petersen
      • Re: [PATCH v2 08/10] mpt3sas: Enable interrupt coalescing on high iops, Sreekanth Reddy
  • [PATCH v2 09/10] mpt3sas: Introduce perf_mode module parameter, Suganath Prabu S
  • [PATCH v2 10/10] mpt3sas: Update driver version to 29.100.00.00, Suganath Prabu S
• [PATCH v3 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Stanley Chu
  • [PATCH v3 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Stanley Chu
    • RE: [PATCH v3 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Avri Altman
      • RE: [PATCH v3 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Stanley Chu
  • [PATCH v3 3/3] scsi: ufs: Use re-factored Auto-Hibernate function, Stanley Chu
  • [PATCH v3 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Stanley Chu
• [PATCH] scsi: fix typos in code comments, Weitao Hou
  • Re: [PATCH] scsi: fix typos in code comments, Martin K. Petersen
• [PATCH] fdomain: Add register definitions, Ondrej Zary
  • Re: [PATCH] fdomain: Add register definitions, Martin K. Petersen
• [PATCH] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), Jason Yan
  • Re: [PATCH] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), John Garry
    • Re: [PATCH] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), Jason Yan
      • Re: [PATCH] scsi: libsas: no need to join wide port again in sas_ex_discover_dev(), John Garry
• [PATCH 00/10] mpt3sas: Aero/Sea HBA feature addition, Suganath Prabu S
  • [PATCH 01/10] mpt3sas: function pointers of request descriptor, Suganath Prabu S
    • [RFC PATCH] mpt3sas: _base_put_smid_fast_path can be static, kbuild test robot
    • Re: [PATCH 01/10] mpt3sas: function pointers of request descriptor, kbuild test robot
  • [PATCH 02/10] mpt3sas: Add Atomic Request Descriptor support on Aero, Suganath Prabu S
  • [PATCH 03/10] mpt3sas: Add flag high_iops_queues, Suganath Prabu S
  • [PATCH 04/10] mpt3sas: change _base_get_msix_index prototype, Suganath Prabu S
  • [PATCH 05/10] mpt3sas: Use highiops queues if more in-flights, Suganath Prabu S
  • [PATCH 06/10] mpt3sas: save msix index and use same while posting RD, Suganath Prabu S
  • [PATCH 07/10] mpt3sas: Affinity high iops queues IRQs to local node, Suganath Prabu S
  • [PATCH 08/10] mpt3sas: Enable interrupt coalescing on high iops, Suganath Prabu S
  • [PATCH 09/10] mpt3sas: Introduce perf_mode module parameter, Suganath Prabu S
  • [PATCH 10/10] mpt3sas: Update driver version to 29.100.00.00, Suganath Prabu S
• [GIT PULL] final round of SCSI updates for the 5.1+ merge window, James Bottomley
  • Re: [GIT PULL] final round of SCSI updates for the 5.1+ merge window, Linus Torvalds
    • Re: [GIT PULL] final round of SCSI updates for the 5.1+ merge window, Martin K. Petersen
• [PATCH] hpsa-correct-static-checker-issue-in-reset-handler, Don Brace
• Block device naming, Alibek Amaev
  • Re: Block device naming, Hannes Reinecke
    • Re: Block device naming, Alibek Amaev
      • Re: Block device naming, Hannes Reinecke
        • Re: Block device naming, Alibek Amaev
• [PATCH v2 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Stanley Chu
  • [PATCH v2 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Stanley Chu
    • Re: [PATCH v2 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Alim Akhtar
      • RE: [PATCH v2 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Avri Altman
        • RE: [PATCH v2 1/3] scsi: ufs: Do not overwrite Auto-Hibernate timer, Stanley Chu
  • [PATCH v2 3/3] scsi: ufs: Use re-factored Auto-Hibernate function, Stanley Chu
    • RE: [EXT] [PATCH v2 3/3] scsi: ufs: Use re-factored Auto-Hibernate function, Bean Huo (beanhuo)
    • Re: [PATCH v2 3/3] scsi: ufs: Use re-factored Auto-Hibernate function, Alim Akhtar
  • [PATCH v2 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Stanley Chu
    • RE: [EXT] [PATCH v2 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Bean Huo (beanhuo)
    • Re: [PATCH v2 2/3] scsi: ufs: Add error-handling of Auto-Hibernate, Alim Akhtar
  • Re: [PATCH v2 0/3] scsi: ufs: Add error handling of Auto-Hibernate, Stanley Chu
• [PATCH v2 0/3] fdomain: Resurrect driver, Ondrej Zary
  • [PATCH v2 1/3] fdomain: Resurrect driver (core), Ondrej Zary
  • [PATCH v2 2/3] fdomain: Resurrect driver (PCI support), Ondrej Zary
  • [PATCH v2 3/3] fdomain: Resurrect driver (ISA support), Ondrej Zary
  • Re: [PATCH v2 0/3] fdomain: Resurrect driver, Martin K. Petersen
• [PATCH] scsi: aic7xxx: Remove NULL check before kfree(), Quentin Deslandes
• [PATCH 1/2] scsi: libsas: only clear phy->in_shutdown after shutdown event done, Jason Yan
  • [PATCH 2/2] scsi: libsas: delete sas port if expander discover failed, Jason Yan
    • Re: [PATCH 2/2] scsi: libsas: delete sas port if expander discover failed, John Garry
      • Re: [PATCH 2/2] scsi: libsas: delete sas port if expander discover failed, Jason Yan
        • Re: [PATCH 2/2] scsi: libsas: delete sas port if expander discover failed, John Garry
  • Re: [PATCH 1/2] scsi: libsas: only clear phy->in_shutdown after shutdown event done, Martin K. Petersen
• [PATCH v1 0/3] scsi: ufs: add error handlings of auto-hibern8, Stanley Chu
  • [PATCH v1 3/3] scsi: ufs: use re-factored auto_hibern8 function, Stanley Chu
  • [PATCH v1 1/3] scsi: ufs: do not overwrite auto-hibern8 timer, Stanley Chu
  • [PATCH v1 2/3] scsi: ufs: add error handling of auto-hibern8, Stanley Chu
    • RE: [EXT] [PATCH v1 2/3] scsi: ufs: add error handling of auto-hibern8, Bean Huo (beanhuo)
      • RE: [EXT] [PATCH v1 2/3] scsi: ufs: add error handling of auto-hibern8, Stanley Chu
        • RE: [EXT] [PATCH v1 2/3] scsi: ufs: add error handling of auto-hibern8, Bean Huo (beanhuo)
          • RE: [EXT] [PATCH v1 2/3] scsi: ufs: add error handling of auto-hibern8, Stanley Chu
  • Re: [PATCH v1 0/3] scsi: ufs: add error handlings of auto-hibern8, Marc Gonzalez
    • Re: [PATCH v1 0/3] scsi: ufs: add error handlings of auto-hibern8, Stanley Chu
    • RE: [PATCH v1 0/3] scsi: ufs: add error handlings of auto-hibern8, Avri Altman
• Poor SWIOTLB Performance with HIGHMEM64G, tedheadster
  • Re: Poor SWIOTLB Performance with HIGHMEM64G, Christoph Hellwig
    • Re: Poor SWIOTLB Performance with HIGHMEM64G, tedheadster
      • Re: Poor SWIOTLB Performance with HIGHMEM64G, Christoph Hellwig
        • Re: Poor SWIOTLB Performance with HIGHMEM64G, tedheadster
          • Re: Poor SWIOTLB Performance with HIGHMEM64G, Christoph Hellwig
            • Re: Poor SWIOTLB Performance with HIGHMEM64G, tedheadster
              • Re: Poor SWIOTLB Performance with HIGHMEM64G, Christoph Hellwig
• [PATCH 1/2] fdomain: Remove BIOS-related code from core, Ondrej Zary
  • [PATCH 2/2] fdomain: Add ISA bus support, Ondrej Zary
    • Re: [PATCH 2/2] fdomain: Add ISA bus support, Christoph Hellwig
      • Re: [PATCH 2/2] fdomain: Add ISA bus support, Ondrej Zary
  • Re: [PATCH 1/2] fdomain: Remove BIOS-related code from core, Christoph Hellwig
  • Re: [PATCH 1/2] fdomain: Remove BIOS-related code from core, Martin K. Petersen
• [PATCH] scsi: myrs: Fix uninitialized variable, YueHaibing
  • Re: [PATCH] scsi: myrs: Fix uninitialized variable, Hannes Reinecke
  • Re: [PATCH] scsi: myrs: Fix uninitialized variable, Martin K. Petersen
• [PATCH] qla2xxx: always allocate qla_tgt_wq, Hannes Reinecke
  • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Bart Van Assche
    • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Ewan D. Milne
      • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Bart Van Assche
        • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Ewan D. Milne
      • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Martin Wilck
        • Re: [PATCH] qla2xxx: always allocate qla_tgt_wq, Quinn Tran
• Problems with logout in qlt_free_session_done, Shivaram Upadhyayula
  • Re: Problems with logout in qlt_free_session_done, Giridhar Malavali
    • Re: Problems with logout in qlt_free_session_done, Shivaram Upadhyayula
• [PATCH 1/3][V3] lib: fix __sysfs_match_string() helper when n != -1, Alexandru Ardelean
  • [PATCH 2/3][V3] scsi: sd: remove sysfs_match_string() dense array comment, Alexandru Ardelean
  • [PATCH 3/3][V3] iio: Handle enumerated properties with gaps, Alexandru Ardelean
    • Re: [PATCH 3/3][V3] iio: Handle enumerated properties with gaps, Andy Shevchenko
      • Re: [PATCH 3/3][V3] iio: Handle enumerated properties with gaps, Ardelean, Alexandru
        • Re: [PATCH 3/3][V3] iio: Handle enumerated properties with gaps, Ardelean, Alexandru
  • Re: [PATCH 1/3][V3] lib: fix __sysfs_match_string() helper when n != -1, Ardelean, Alexandru
  • Re: [PATCH 1/3][V3] lib: fix __sysfs_match_string() helper when n != -1, Jonathan Cameron
• [PATCH v2 0/7] Hexdump Enhancements, Alastair D'Silva
  • [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags, Alastair D'Silva
    • Re: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags, Jani Nikula
    • Re: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags, Greg Kroah-Hartman
    • RE: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags, David Laight
      • RE: [PATCH v2 4/7] lib/hexdump.c: Replace ascii bool in hex_dump_to_buffer with flags, Alastair D'Silva
  • [PATCH v2 7/7] lib/hexdump.c: Optionally retain byte ordering, Alastair D'Silva
  • [PATCH v2 6/7] lib/hexdump.c: Allow multiple groups to be separated by spaces, Alastair D'Silva
  • [PATCH v2 5/7] lib/hexdump.c: Allow multiple groups to be separated by lines '|', Alastair D'Silva
  • [PATCH v2 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer, Alastair D'Silva
  • [PATCH v2 1/7] lib/hexdump.c: Fix selftests, Alastair D'Silva
  • [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes, Alastair D'Silva
    • Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes, Randy Dunlap
      • Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes, Alastair D'Silva
    • Re: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes, Geert Uytterhoeven
      • RE: [PATCH v2 3/7] lib/hexdump.c: Optionally suppress lines of repeated bytes, Alastair D'Silva
• [GIT PULL] first round of SCSI updates for the 5.1+ merge window, James Bottomley
  • Re: [GIT PULL] first round of SCSI updates for the 5.1+ merge window, pr-tracker-bot
• [PATCH 0/7] hpsa updates, Don Brace
  • [PATCH 1/7] hpsa: correct simple mode, Don Brace
  • [PATCH 2/7] hpsa: use local workqueues instead of system workqueues, Don Brace
  • [PATCH 3/7] hpsa: check for tag collision, Don Brace
  • [PATCH 4/7] hpsa: wait longer for ptraid commands, Don Brace
  • [PATCH 5/7] hpsa: do-not-complete-cmds-for-deleted-devices, Don Brace
  • [PATCH 7/7] hpsa: update driver version, Don Brace
  • [PATCH 6/7] hpsa: correct device resets, Don Brace
  • Re: [PATCH 0/7] hpsa updates, Martin K. Petersen
• [PATCH v2 00/21] megaraid_sas: Driver updates, Shivasharan S
  • [PATCH v2 01/21] megaraid_sas: remove unused variable target_index, Shivasharan S
  • [PATCH v2 03/21] megaraid_sas: fw_reset_no_pci_access required for MFI adapters only, Shivasharan S
  • [PATCH v2 04/21] megaraid_sas: rework code around controller reset, Shivasharan S
  • [PATCH v2 05/21] megaraid_sas: Block PCI config space access from userspace during OCR, Shivasharan S
  • [PATCH v2 06/21] megaraid_sas: IRQ poll to avoid CPU hard lockups, Shivasharan S
  • [PATCH v2 07/21] megaraid_sas: Load balance completions across all MSIx, Shivasharan S
  • [PATCH v2 08/21] megaraid_sas: Enhance prints in OCR and TM path, Shivasharan S
  • [PATCH v2 09/21] megaraid_sas: Enhance internal DCMD timeout prints, Shivasharan S
  • [PATCH v2 10/21] megaraid_sas: Add formatting option for megasas_dump, Shivasharan S
  • [PATCH v2 11/21] megaraid_sas: Dump system interface regs from sysfs, Shivasharan S
  • [PATCH v2 12/21] megaraid_sas: Dump system registers for debugging, Shivasharan S
  • [PATCH v2 13/21] megaraid_sas: Print BAR information from driver, Shivasharan S
  • [PATCH v2 14/21] megaraid_sas: Export RAID map id through sysfs, Shivasharan S
  • [PATCH v2 15/21] megaraid_sas: Print FW fault information, Shivasharan S
  • [PATCH v2 16/21] megaraid_sas: Print firmware interrupt status, Shivasharan S
  • [PATCH v2 17/21] megaraid_sas: Add prints in suspend and resume path, Shivasharan S
  • [PATCH v2 18/21] megaraid_sas: Add debug prints for device list, Shivasharan S
  • [PATCH v2 19/21] megaraid_sas: Fix MSI-x vector print, Shivasharan S
  • [PATCH v2 20/21] megaraid_sas: Export RAID map through debugfs, Shivasharan S
  • [PATCH v2 21/21] megaraid_sas: Update driver version to 07.708.03.00, Shivasharan S
  • Re: [PATCH v2 00/21] megaraid_sas: Driver updates, Martin K. Petersen
• [PATCH] qla2xxx: remove double assignment in qla2x00_update_fcport, Enzo Matsumiya
  • Re: [PATCH] qla2xxx: remove double assignment in qla2x00_update_fcport, Martin K. Petersen
    • Re: [EXT] Re: [PATCH] qla2xxx: remove double assignment in qla2x00_update_fcport, Himanshu Madhani
  • Re: [PATCH] qla2xxx: remove double assignment in qla2x00_update_fcport, Martin K. Petersen
• [PATCH AUTOSEL 5.0 55/99] scsi: aic7xxx: fix EISA support, Sasha Levin
• [PATCH AUTOSEL 4.19 40/81] scsi: aic7xxx: fix EISA support, Sasha Levin
• [PATCH AUTOSEL 4.14 56/95] scsi: raid_attrs: fix unused variable warning, Sasha Levin
• [PATCH v2 0/4] lpfc updated for 12.2.0.2, James Smart
  • [PATCH v2 1/4] lpfc: resolve lockdep warnings, James Smart
  • [PATCH v2 2/4] lpfc: correct rcu unlock issue in lpfc_nvme_info_show, James Smart
  • [PATCH v2 3/4] lpfc: add check for loss of ndlp when sending RRQ, James Smart
  • [PATCH v2 4/4] lpfc: Update lpfc version to 12.2.0.2, James Smart
  • Re: [PATCH v2 0/4] lpfc updated for 12.2.0.2, Bart Van Assche
  • Re: [PATCH v2 0/4] lpfc updated for 12.2.0.2, Martin K. Petersen
• [RFC PATCH 0/4] Inline Encryption Support, Satya Tangirala
  • [RFC PATCH 1/4] block: Block Layer changes for Inline Encryption Support, Satya Tangirala
    • Re: [RFC PATCH 1/4] block: Block Layer changes for Inline Encryption Support, Randy Dunlap
    • Re: [RFC PATCH 1/4] block: Block Layer changes for Inline Encryption Support, Bart Van Assche
    • Re: [RFC PATCH 1/4] block: Block Layer changes for Inline Encryption Support, Randy Dunlap
  • [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support, Satya Tangirala
    • Re: [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support, Randy Dunlap
    • Re: [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support, Bart Van Assche
    • RE: [RFC PATCH 2/4] scsi: ufs: UFS driver v2.1 crypto support, Avri Altman
  • [RFC PATCH 3/4] fscrypt: wire up fscrypt to use blk-crypto, Satya Tangirala
    • Re: [RFC PATCH 3/4] fscrypt: wire up fscrypt to use blk-crypto, Bart Van Assche
  • [RFC PATCH 4/4] f2fs: Wire up f2fs to use inline encryption via fscrypt, Satya Tangirala
    • Re: [RFC PATCH 4/4] f2fs: Wire up f2fs to use inline encryption via fscrypt, Bart Van Assche
    • Re: [RFC PATCH 4/4] f2fs: Wire up f2fs to use inline encryption via fscrypt, Chao Yu
  • Re: [RFC PATCH 0/4] Inline Encryption Support, Bart Van Assche
  • Re: [RFC PATCH 0/4] Inline Encryption Support, Chao Yu
• [PATCH 0/2] qla2xxx: Bug fixes for the driver, Himanshu Madhani
  • [PATCH 1/2] qla2xxx: Fix Crash due to NULL pointer access in qla2x00_sysfs_read_optrom(), Himanshu Madhani
    • Re: [PATCH 1/2] qla2xxx: Fix Crash due to NULL pointer access in qla2x00_sysfs_read_optrom(), Ewan D. Milne
      • Re: [EXT] Re: [PATCH 1/2] qla2xxx: Fix Crash due to NULL pointer access in qla2x00_sysfs_read_optrom(), Himanshu Madhani
  • [PATCH 2/2] qla2xxx: Add cleanup for PCI EEH recovery, Himanshu Madhani
    • Re: [PATCH 2/2] qla2xxx: Add cleanup for PCI EEH recovery, Ewan D. Milne
    • Re: [PATCH 2/2] qla2xxx: Add cleanup for PCI EEH recovery, Martin K. Petersen
• [PATCH 5.0 063/122] scsi: core: add new RDAC LENOVO/DE_Series device, Greg Kroah-Hartman
• [PATCH 4.19 51/99] scsi: core: add new RDAC LENOVO/DE_Series device, Greg Kroah-Hartman
• [PATCH 4.14 45/75] scsi: core: add new RDAC LENOVO/DE_Series device, Greg Kroah-Hartman
• [PATCH 4.9 44/62] scsi: core: add new RDAC LENOVO/DE_Series device, Greg Kroah-Hartman
• [PATCHv2] osst: kill obsolete driver, Hannes Reinecke
  • Re: [PATCHv2] osst: kill obsolete driver, Martin K. Petersen
• Re: "iommu/amd: Set exclusion range correctly" causes smartpqi offline, Qian Cai
  • Re: "iommu/amd: Set exclusion range correctly" causes smartpqi offline, Joerg Roedel
• [PATCH] scsi: bnx2fc: fix incorrect cast to u64 on shift operation, Colin King
  • Re: [PATCH] scsi: bnx2fc: fix incorrect cast to u64 on shift operation, Saurav Kashyap
  • Re: [PATCH] scsi: bnx2fc: fix incorrect cast to u64 on shift operation, Christophe JAILLET
  • Re: [PATCH] scsi: bnx2fc: fix incorrect cast to u64 on shift operation, Martin K. Petersen
• [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, Colin King
  • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, James Bottomley
    • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, Colin Ian King
      • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, James Bottomley
        • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, Hannes Reinecke
          • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, James Bottomley
            • Re: [PATCH] mptsas: fix undefined behaviour of a shift of an int by more than 31 places, Colin Ian King
• [PATCH] osst: kill obsolete driver, Hannes Reinecke
  • Re: [PATCH] osst: kill obsolete driver, kbuild test robot
• [PATCH v2 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template, Tyrel Datwyler
  • [PATCH v2 2/3] ibmvscsi: redo driver work thread to use enum action states, Tyrel Datwyler
  • [PATCH v2 3/3] ibmvscsi: fix tripping of blk_mq_run_hw_queue WARN_ON, Tyrel Datwyler
  • Re: [PATCH v2 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template, Martin K. Petersen
• Re: [PATCH 0/5] block/target queue/LUN reset support, Brian King
  • Re: [PATCH 0/5] block/target queue/LUN reset support, Hannes Reinecke
• [PATCH 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template, Tyrel Datwyler
  • [PATCH 2/3] ibmvscsi: redo driver work thread to use enum action states, Tyrel Datwyler
    • Re: [PATCH 2/3] ibmvscsi: redo driver work thread to use enum action states, Brian King
      • Re: [PATCH 2/3] ibmvscsi: redo driver work thread to use enum action states, Tyrel Datwyler
  • [PATCH 3/3] ibmvscsi: fix tripping of blk_mq_run_hw_queue WARN_ON, Tyrel Datwyler
  • Re: [PATCH 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template, Brian King
    • Re: [PATCH 1/3] ibmvscsi: Wire up host_reset() in the drivers scsi_host_template, Tyrel Datwyler
• [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
  • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
    • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), James Bottomley
      • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
        • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), James Bottomley
          • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
            • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
          • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Martin K. Petersen
            • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Douglas Gilbert
              • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Martin K. Petersen
      • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
        • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Martin K. Petersen
          • Re: [PATCH] scsi: ses: Fix out-of-bounds memory access in ses_enclosure_data_process(), Waiman Long
• [PATCH 0/4] lpfc updated for 12.2.0.2, James Smart
  • [PATCH 1/4] lpfc: resolve lockdep warnings, James Smart
  • [PATCH 2/4] lpfc: correct rcu unlock issue in lpfc_nvme_info_show, James Smart
  • [PATCH 3/4] lpfc: add check for loss of ndlp when sending RRQ, James Smart
  • [PATCH 4/4] lpfc: Update lpfc version to 12.2.0.2, James Smart
  • Re: [PATCH 0/4] lpfc updated for 12.2.0.2, Bart Van Assche
    • Re: [PATCH 0/4] lpfc updated for 12.2.0.2, James Smart
• switch core SCSI code to SPDX tags, Christoph Hellwig
  • [PATCH 12/24] libfc: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 12/24] libfc: switch to SPDX tags, Hannes Reinecke
    • Re: [PATCH 12/24] libfc: switch to SPDX tags, Martin K. Petersen
  • [PATCH 16/24] libsas: switch sas_ata.[ch] to SPDX tags, Christoph Hellwig
    • Re: [PATCH 16/24] libsas: switch sas_ata.[ch] to SPDX tags, Hannes Reinecke
  • [PATCH 21/24] sg: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 21/24] sg: switch to SPDX tags, Hannes Reinecke
    • Re: [PATCH 21/24] sg: switch to SPDX tags, Douglas Gilbert
    • Re: [PATCH 21/24] sg: switch to SPDX tags, Douglas Gilbert
  • [PATCH 23/24] st: add a SPDX tag to st.c, Christoph Hellwig
    • Re: [PATCH 23/24] st: add a SPDX tag to st.c, Hannes Reinecke
  • [PATCH 24/24] osst: add a SPDX tag to osst.c, Christoph Hellwig
    • Re: [PATCH 24/24] osst: add a SPDX tag to osst.c, Hannes Reinecke
      • Re: [PATCH 24/24] osst: add a SPDX tag to osst.c, Christoph Hellwig
        • Re: [PATCH 24/24] osst: add a SPDX tag to osst.c, Hannes Reinecke
          • Message not available
            • Re: [PATCH 24/24] osst: add a SPDX tag to osst.c, Hannes Reinecke
  • [PATCH 22/24] sr: add a SPDX tag to sr.c, Christoph Hellwig
    • Re: [PATCH 22/24] sr: add a SPDX tag to sr.c, Hannes Reinecke
  • [PATCH 20/24] ses: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 20/24] ses: switch to SPDX tags, Hannes Reinecke
  • [PATCH 18/24] sd: add a SPDX tag to sd.c, Christoph Hellwig
    • Re: [PATCH 18/24] sd: add a SPDX tag to sd.c, Hannes Reinecke
  • [PATCH 19/24] sd: switch remaining files to SPDX tags, Christoph Hellwig
    • Re: [PATCH 19/24] sd: switch remaining files to SPDX tags, Hannes Reinecke
  • [PATCH 17/24] libsas: switch remaining files to SPDX tags, Christoph Hellwig
    • Re: [PATCH 17/24] libsas: switch remaining files to SPDX tags, Hannes Reinecke
    • Re: [PATCH 17/24] libsas: switch remaining files to SPDX tags, John Garry
  • [PATCH 15/24] libsas: add a SPDX tag to sas_task.c, Christoph Hellwig
    • Re: [PATCH 15/24] libsas: add a SPDX tag to sas_task.c, Hannes Reinecke
  • [PATCH 14/24] libiscsi: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 14/24] libiscsi: switch to SPDX tags, Hannes Reinecke
  • [PATCH 13/24] libfcoe: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 13/24] libfcoe: switch to SPDX tags, Hannes Reinecke
  • [PATCH 09/24] scsi_transport_spi: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 09/24] scsi_transport_spi: switch to SPDX tags, Hannes Reinecke
  • [PATCH 01/24] scsi: add SPDX tags to scsi midlayer files missing licensing information, Christoph Hellwig
    • Re: [PATCH 01/24] scsi: add SPDX tags to scsi midlayer files missing licensing information, Hannes Reinecke
  • [PATCH 02/24] scsi: switch the remaining scsi midlayer files to use SPDX tags, Christoph Hellwig
    • Re: [PATCH 02/24] scsi: switch the remaining scsi midlayer files to use SPDX tags, Hannes Reinecke
  • [PATCH 03/24] scsi_netlink: remove duplicate GPL boilerplate text, Christoph Hellwig
    • Re: [PATCH 03/24] scsi_netlink: remove duplicate GPL boilerplate text, Hannes Reinecke
  • [PATCH 04/24] scsi_transport.h: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 04/24] scsi_transport.h: switch to SPDX tags, Hannes Reinecke
  • [PATCH 08/24] scsi_transport_sas: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 08/24] scsi_transport_sas: switch to SPDX tags, Hannes Reinecke
  • [PATCH 11/24] libfc: remove duplicate GPL boilerplate text, Christoph Hellwig
    • Re: [PATCH 11/24] libfc: remove duplicate GPL boilerplate text, Hannes Reinecke
  • [PATCH 07/24] scsi_transport_iscsi: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 07/24] scsi_transport_iscsi: switch to SPDX tags, Hannes Reinecke
  • [PATCH 10/24] scsi_transport_srp: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 10/24] scsi_transport_srp: switch to SPDX tags, Hannes Reinecke
    • Re: [PATCH 10/24] scsi_transport_srp: switch to SPDX tags, Bart Van Assche
  • [PATCH 05/24] scsi_transport_fc: remove duplicate GPL boilerplate text, Christoph Hellwig
    • Re: [PATCH 05/24] scsi_transport_fc: remove duplicate GPL boilerplate text, Hannes Reinecke
  • [PATCH 06/24] scsi_transport_fc: switch to SPDX tags, Christoph Hellwig
    • Re: [PATCH 06/24] scsi_transport_fc: switch to SPDX tags, Hannes Reinecke
• [PATCH net-next 00/10] qed*: Improve performance on 100G link for offload protocols, Michal Kalderon
  • [PATCH net-next 01/10] qed: Modify api for performing a dmae to another PF, Michal Kalderon
  • [PATCH net-next 02/10] qed: Add llh ppfid interface and 100g support for offload protocols, Michal Kalderon
    • Re: [PATCH net-next 02/10] qed: Add llh ppfid interface and 100g support for offload protocols, kbuild test robot
  • [PATCH net-next 05/10] qedr: Change the MSI-X vectors selection to be based on affined engine, Michal Kalderon
  • [PATCH net-next 06/10] qed: Set the doorbell address correctly, Michal Kalderon
  • [PATCH net-next 07/10] qed*: Add iWARP 100g support, Michal Kalderon
    • Re: [PATCH net-next 07/10] qed*: Add iWARP 100g support, David Miller
      • Re: [PATCH net-next 07/10] qed*: Add iWARP 100g support, Leon Romanovsky
        • RE: [EXT] Re: [PATCH net-next 07/10] qed*: Add iWARP 100g support, Michal Kalderon
          • Re: [EXT] Re: [PATCH net-next 07/10] qed*: Add iWARP 100g support, Leon Romanovsky
            • RE: [EXT] Re: [PATCH net-next 07/10] qed*: Add iWARP 100g support, Michal Kalderon
  • [PATCH net-next 08/10] Revert "scsi: qedi: Allocate IRQs based on msix_cnt", Michal Kalderon
  • [PATCH net-next 09/10] qedi: Use hwfns and affin_hwfn_idx to get MSI-X vector index, Michal Kalderon
  • [PATCH net-next 10/10] qedf: Use hwfns and affin_hwfn_idx to get MSI-X vector index to use, Michal Kalderon
  • [PATCH net-next 03/10] qed: Change hwfn used for sb initialization, Michal Kalderon
  • [PATCH net-next 04/10] qed: Modify offload protocols to use the affined engine, Michal Kalderon
• [PATCH v2 0/2] sd: Rely on the driver core for asynchronous probing, Bart Van Assche
  • [PATCH v2 1/2] sd: Rely on the driver core for asynchronous probing, Bart Van Assche
    • Re: [PATCH v2 1/2] sd: Rely on the driver core for asynchronous probing, Hannes Reinecke
  • [PATCH v2 2/2] sd: Inline sd_probe_part2(), Bart Van Assche
    • Re: [PATCH v2 2/2] sd: Inline sd_probe_part2(), Hannes Reinecke
  • Re: [PATCH v2 0/2] sd: Rely on the driver core for asynchronous probing, Martin K. Petersen
    • Re: [PATCH v2 0/2] sd: Rely on the driver core for asynchronous probing, Pavel Machek
      • Re: [PATCH v2 0/2] sd: Rely on the driver core for asynchronous probing, Martin K. Petersen
• [scsi:misc 301/301] drivers/scsi/fdomain.c:442:12: sparse: sparse: context imbalance in 'fdomain_host_reset' - wrong count at exit, kbuild test robot
  • Re: [scsi:misc 301/301] drivers/scsi/fdomain.c:442:12: sparse: sparse: context imbalance in 'fdomain_host_reset' - wrong count at exit, Johannes Thumshirn
• [PATCH V9 0/7] blk-mq: fix races related with freeing queue, Ming Lei
  • [PATCH V9 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
    • Re: [PATCH V9 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Bart Van Assche
  • [PATCH V9 2/7] blk-mq: move cancel of requeue_work into blk_mq_release, Ming Lei
  • [PATCH V9 3/7] blk-mq: free hw queue's resource in hctx's release handler, Ming Lei
  • [PATCH V9 4/7] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Ming Lei
  • [PATCH V9 5/7] blk-mq: always free hctx after request queue is freed, Ming Lei
  • [PATCH V9 6/7] blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release, Ming Lei
  • [PATCH V9 7/7] block: don't drain in-progress dispatch in blk_cleanup_queue(), Ming Lei
  • Re: [PATCH V9 0/7] blk-mq: fix races related with freeing queue, Jens Axboe
• [Bug 199887] Fibre login failure on older adapters, bugzilla-daemon
  • <Possible follow-ups>
  • [Bug 199887] Fibre login failure on older adapters, bugzilla-daemon
  • [Bug 199887] Fibre login failure on older adapters, bugzilla-daemon
  • [Bug 199887] Fibre login failure on older adapters, bugzilla-daemon
• [PATCH 0/2] Revert the patches that rework sd probing, Bart Van Assche
  • [PATCH 1/2] sd: Revert "Inline sd_probe_part2()", Bart Van Assche
  • [PATCH 2/2] sd: Revert "Rely on the driver core for asynchronous probing", Bart Van Assche
  • Re: [PATCH 0/2] Revert the patches that rework sd probing, Pavel Machek
  • Re: [PATCH 0/2] Revert the patches that rework sd probing, Martin K. Petersen
• [PATCH 0/4] fdomain: Resurrect driver (modular version), Ondrej Zary
  • [PATCH 4/4] fdomain: Resurrect driver (PCMCIA support), Ondrej Zary
  • [PATCH 1/4] fdomain: Resurrect driver (core), Ondrej Zary
    • Re: [PATCH 1/4] fdomain: Resurrect driver (core), Christoph Hellwig
      • [PATCH 1/4 v2] fdomain: Resurrect driver (core), Ondrej Zary
  • [PATCH 2/4] fdomain: Resurrect driver (PCI support), Ondrej Zary
    • Re: [PATCH 2/4] fdomain: Resurrect driver (PCI support), Christoph Hellwig
  • [PATCH 3/4] fdomain: Resurrect driver (ISA support), Ondrej Zary
  • Re: [PATCH 0/4] fdomain: Resurrect driver (modular version), Martin K. Petersen
• [PATCH V8 0/7] blk-mq: fix races related with freeing queue, Ming Lei
  • [PATCH V8 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
    • Re: [PATCH V8 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Christoph Hellwig
    • Re: [PATCH V8 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Bart Van Assche
      • Re: [PATCH V8 1/7] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
  • [PATCH V8 2/7] blk-mq: move cancel of requeue_work into blk_mq_release, Ming Lei
  • [PATCH V8 3/7] blk-mq: free hw queue's resource in hctx's release handler, Ming Lei
  • [PATCH V8 4/7] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Ming Lei
    • Re: [PATCH V8 4/7] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Christoph Hellwig
    • Re: [PATCH V8 4/7] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Hannes Reinecke
      • Re: [PATCH V8 4/7] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Ming Lei
  • [PATCH V8 5/7] blk-mq: always free hctx after request queue is freed, Ming Lei
    • Re: [PATCH V8 5/7] blk-mq: always free hctx after request queue is freed, Christoph Hellwig
      • Re: [PATCH V8 5/7] blk-mq: always free hctx after request queue is freed, Ming Lei
  • [PATCH V8 6/7] blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release, Ming Lei
  • [PATCH V8 7/7] block: don't drain in-progress dispatch in blk_cleanup_queue(), Ming Lei
• [PATCH V4 0/3] scsi: core: avoid big pre-allocation for sg list, Ming Lei
  • [PATCH V4 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Ming Lei
    • Re: [PATCH V4 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Christoph Hellwig
  • [PATCH V4 2/3] scsi: core: avoid to pre-allocate big chunk for protection meta data, Ming Lei
    • Re: [PATCH V4 2/3] scsi: core: avoid to pre-allocate big chunk for protection meta data, Bart Van Assche
  • [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Ming Lei
    • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Bart Van Assche
    • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Guenter Roeck
      • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Ming Lei
        • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Guenter Roeck
          • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Ming Lei
            • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Guenter Roeck
          • Re: [PATCH V4 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Ming Lei
  • Re: [PATCH V4 0/3] scsi: core: avoid big pre-allocation for sg list, Ming Lei
  • Re: [PATCH V4 0/3] scsi: core: avoid big pre-allocation for sg list, Martin K. Petersen
• [PATCH 0/2] iscsi target: fix login negotiation, Mike Christie
  • [PATCH 1/2] iscsi target: make function to get auth from conn, Mike Christie
  • [PATCH 2/2] iscsi target: Fix CHAP negotiation setup, Mike Christie
• [PATCH AUTOSEL 5.0 53/79] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH AUTOSEL 4.19 40/53] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH AUTOSEL 4.14 22/32] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH AUTOSEL 4.9 11/16] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH AUTOSEL 4.4 7/9] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH AUTOSEL 3.18 6/8] scsi: csiostor: fix missing data copy in csio_scsi_err_handler(), Sasha Levin
• [PATCH v2 0/2] Ramrod timer and ep state fixes., Manish Rangankar
  • [PATCH v2 1/2] qedi: Abort ep termination if offload not scheduled., Manish Rangankar
  • [PATCH v2 2/2] qedi: Adjust termination and offload ramrod timers., Manish Rangankar
  • Re: [PATCH v2 0/2] Ramrod timer and ep state fixes., Martin K. Petersen
• [PATCH 00/21] megaraid_sas: Driver updates, Shivasharan S
  • [PATCH 01/21] megaraid_sas: remove unused variable target_index, Shivasharan S
  • [PATCH 02/21] megaraid_sas: Fix calculation of target ID, Shivasharan S
    • Message not available
      • Re: [PATCH 02/21] megaraid_sas: Fix calculation of target ID, Shivasharan Srikanteshwara
  • [PATCH 03/21] megaraid_sas: fw_reset_no_pci_access required for MFI adapters only, Shivasharan S
  • [PATCH 04/21] megaraid_sas: rework code around controller reset, Shivasharan S
  • [PATCH 05/21] megaraid_sas: Block PCI config space access from userspace during OCR, Shivasharan S
  • [PATCH 06/21] megaraid_sas: IRQ poll to avoid CPU hard lockups, Shivasharan S
    • [RFC PATCH] megaraid_sas: megasas_enable_irq_poll() can be static, kbuild test robot
    • Re: [PATCH 06/21] megaraid_sas: IRQ poll to avoid CPU hard lockups, kbuild test robot
  • [PATCH 07/21] megaraid_sas: Load balance completions across all MSIx, Shivasharan S
  • [PATCH 08/21] megaraid_sas: Enhance prints in OCR and TM path, Shivasharan S
  • [PATCH 09/21] megaraid_sas: Enhance internal DCMD timeout prints, Shivasharan S
  • [PATCH 10/21] megaraid_sas: Add formatting option for megasas_dump, Shivasharan S
  • [PATCH 11/21] megaraid_sas: Dump system interface regs from sysfs, Shivasharan S
    • Re: [PATCH 11/21] megaraid_sas: Dump system interface regs from sysfs, kbuild test robot
  • [PATCH 12/21] megaraid_sas: Dump system registers for debugging, Shivasharan S
  • [PATCH 13/21] megaraid_sas: Print BAR information from driver, Shivasharan S
  • [PATCH 14/21] megaraid_sas: Export RAID map id through sysfs, Shivasharan S
  • [PATCH 15/21] megaraid_sas: Print FW fault information, Shivasharan S
  • [PATCH 16/21] megaraid_sas: Print firmware interrupt status, Shivasharan S
  • [PATCH 17/21] megaraid_sas: Add prints in suspend and resume path, Shivasharan S
  • [PATCH 18/21] megaraid_sas: Add debug prints for device list, Shivasharan S
  • [PATCH 19/21] megaraid_sas: Fix MSI-x vector print, Shivasharan S
  • [PATCH 20/21] megaraid_sas: Export RAID map through debugfs, Shivasharan S
  • [PATCH 21/21] megaraid_sas: Update driver version to 07.708.03.00, Shivasharan S
• [PATCH V3 0/2] scsi: core: avoid big pre-allocation for sg list, Ming Lei
  • [PATCH V3 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Ming Lei
    • Re: [PATCH V3 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Christoph Hellwig
      • Re: [PATCH V3 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Ming Lei
        • Re: [PATCH V3 1/3] lib/sg_pool.c: improve APIs for allocating sg pool, Christoph Hellwig
  • [PATCH V3 2/3] scsi: core: avoid to pre-allocate big chunk for protection meta data, Ming Lei
    • Re: [PATCH V3 2/3] scsi: core: avoid to pre-allocate big chunk for protection meta data, Christoph Hellwig
  • [PATCH V3 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Ming Lei
    • Re: [PATCH V3 3/3] scsi: core: avoid to pre-allocate big chunk for sg list, Christoph Hellwig
• [PATCH AUTOSEL 4.14 22/35] scsi: core: add new RDAC LENOVO/DE_Series device, Sasha Levin
• [PATCH AUTOSEL 4.9 18/28] scsi: core: add new RDAC LENOVO/DE_Series device, Sasha Levin
• [PATCH AUTOSEL 4.9 19/28] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 4.4 09/15] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 3.18 06/10] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 4.14 23/35] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 4.19 33/52] scsi: core: add new RDAC LENOVO/DE_Series device, Sasha Levin
• [PATCH AUTOSEL 4.19 34/52] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 5.0 42/66] scsi: storvsc: Fix calculation of sub-channel count, Sasha Levin
• [PATCH AUTOSEL 5.0 41/66] scsi: core: add new RDAC LENOVO/DE_Series device, Sasha Levin
• [PATCH V7 0/9] blk-mq: fix races related with freeing queue, Ming Lei
  • [PATCH V7 1/9] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
    • Re: [PATCH V7 1/9] blk-mq: grab .q_usage_counter when queuing request from plug code path, Christoph Hellwig
      • Re: [PATCH V7 1/9] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
        • Re: [PATCH V7 1/9] blk-mq: grab .q_usage_counter when queuing request from plug code path, Christoph Hellwig
          • Re: [PATCH V7 1/9] blk-mq: grab .q_usage_counter when queuing request from plug code path, Ming Lei
  • [PATCH V7 2/9] blk-mq: move cancel of requeue_work into blk_mq_release, Ming Lei
    • Re: [PATCH V7 2/9] blk-mq: move cancel of requeue_work into blk_mq_release, Christoph Hellwig
  • [PATCH V7 3/9] blk-mq: free hw queue's resource in hctx's release handler, Ming Lei
    • Re: [PATCH V7 3/9] blk-mq: free hw queue's resource in hctx's release handler, Christoph Hellwig
  • [PATCH V7 4/9] blk-mq: move all hctx alloction & initialization into __blk_mq_alloc_and_init_hctx, Ming Lei
    • Re: [PATCH V7 4/9] blk-mq: move all hctx alloction & initialization into __blk_mq_alloc_and_init_hctx, Christoph Hellwig
      • Re: [PATCH V7 4/9] blk-mq: move all hctx alloction & initialization into __blk_mq_alloc_and_init_hctx, Ming Lei
        • Re: [PATCH V7 4/9] blk-mq: move all hctx alloction & initialization into __blk_mq_alloc_and_init_hctx, Christoph Hellwig
      • Re: [PATCH V7 4/9] blk-mq: move all hctx alloction & initialization into __blk_mq_alloc_and_init_hctx, Ming Lei
  • [PATCH V7 5/9] blk-mq: split blk_mq_alloc_and_init_hctx into two parts, Ming Lei
  • [PATCH V7 6/9] blk-mq: always free hctx after request queue is freed, Ming Lei
    • Re: [PATCH V7 6/9] blk-mq: always free hctx after request queue is freed, Hannes Reinecke
  • [PATCH V7 7/9] blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release, Ming Lei
  • [PATCH V7 8/9] block: don't drain in-progress dispatch in blk_cleanup_queue(), Ming Lei
  • [PATCH V7 9/9] nvme: hold request queue's refcount in ns's whole lifetime, Ming Lei
    • Re: [PATCH V7 9/9] nvme: hold request queue's refcount in ns's whole lifetime, Christoph Hellwig
      • Re: [PATCH V7 9/9] nvme: hold request queue's refcount in ns's whole lifetime, Ming Lei
        • Re: [PATCH V7 9/9] nvme: hold request queue's refcount in ns's whole lifetime, Christoph Hellwig
          • Re: [PATCH V7 9/9] nvme: hold request queue's refcount in ns's whole lifetime, Bart Van Assche