Disabling the SATA drive interface cause kernel panic. When the drive
Interface is disabled, device should be deregistered after aborting
all pending IO's. Also changed the port recovery timeout to 10000 ms
for PM8006 controller.
V2:
-Acquired spin lock after aborting all requests.
Signed-off-by: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
---
drivers/scsi/pm8001/pm8001_sas.c | 6 +++++-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.h | 2 ++
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 88eef3b..0c2f13d 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -888,6 +888,8 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
+ while (pm8001_dev->running_req)
+ msleep(20);
spin_lock_irqsave(&pm8001_ha->lock, flags);
}
PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
@@ -1256,8 +1258,10 @@ int pm8001_abort_task(struct sas_task *task)
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("Waiting for Port reset\n"));
wait_for_completion(&completion_reset);
- if (phy->port_reset_status)
+ if (phy->port_reset_status) {
+ pm8001_dev_gone_notify(dev);
goto out;
+ }
/*
* 4. SATA Abort ALL
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 301de40..63e8af7 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -604,7 +604,7 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &=
0x0000ffff;
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
- 0x140000;
+ CHIP_8006_PORT_RECOVERY_TIMEOUT;
}
pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 84d7426..dc9ab76 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -230,6 +230,8 @@
#define SAS_MAX_AIP 0x200000
#define IT_NEXUS_TIMEOUT 0x7D0
#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+/* Port recovery timeout, 10000 ms for PM8006 controller */
+#define CHIP_8006_PORT_RECOVERY_TIMEOUT 0x640000
#ifdef __LITTLE_ENDIAN_BITFIELD
struct sas_identify_frame_local {
--
1.8.5.6
