Linux Renesas SOC Development
[Prev Page][Next Page]
- RE: [PATCH v2] phy: renesas: phy-rcar-gen2: Fix the array off by one warning, (continued)
- [PATCH 0/2] Add WLAN/BT support,
Biju Das
- [PATCH] rcar-csi2: Fix coccinelle warning for PTR_ERR_OR_ZERO(),
Niklas Söderlund
- [PATCH] dt-bindings: rcar-{csi2,vin}: Rename bindings documentation files,
Niklas Söderlund
- [PATCH v2 0/8] rcar-vin: Merge Gen2 and Gen3 file operations,
Niklas Söderlund
- [PATCH v2 1/8] rcar-vin: Do not call pm_runtime_{resume,suspend}(),
Niklas Söderlund
- [PATCH v2 6/8] rcar-vin: Merge helpers dealing with powering the parallel subdevice,
Niklas Söderlund
- [PATCH v2 7/8] rcar-vin: Fold rvin_initialize_device() into rvin_open(),
Niklas Söderlund
- [PATCH v2 4/8] rcar-vin: Do not sync subdevice format when opening the video device,
Niklas Söderlund
- [PATCH v2 3/8] rcar-vin: Allow interrupting lock when trying to open the video device,
Niklas Söderlund
- [PATCH v2 2/8] rcar-vin: Remove unneeded calls to pm_runtime_{enable,disable},
Niklas Söderlund
- [PATCH v2 5/8] rcar-vin: Move pm_runtime_{get,put} out of helpers,
Niklas Söderlund
- [PATCH v2 8/8] rcar-vin: Merge Gen2 and Gen3 file operations,
Niklas Söderlund
- [PATCH 0/3] rcar-vin: Add support for RGB formats with alpha component,
Niklas Söderlund
- [PATCH] mmc: tmio: fix SCC error handling to avoid false positive CRC error,
Wolfram Sang
- [PATCH v2 0/2] Document HopeRun RZ/G2M boards,
Fabrizio Castro
- [PATCH] media: fdp1: Support M3N and E3 platforms,
Kieran Bingham
- [PATCH v4 00/13] usb: Add host and device support for RZ/A2,
Chris Brandt
- [PATCH v4 08/13] usb: renesas_usbhs: support byte addressable CFIFO,
Chris Brandt
- [PATCH v4 10/13] dt-bindings: usb: renesas_usbhs: Add support for r7s9210,
Chris Brandt
- [PATCH v4 02/13] dt-bindings: rcar-gen3-phy-usb2: Document use of usb_x1,
Chris Brandt
- [PATCH v4 12/13] ARM: dts: r7s9210: Add USB Device support,
Chris Brandt
- [PATCH v4 09/13] usb: renesas_usbhs: Add support for RZ/A2,
Chris Brandt
- [PATCH v4 01/13] phy: renesas: rcar-gen3-usb2: detect usb_x1 clock,
Chris Brandt
- [PATCH v4 03/13] phy: renesas: rcar-gen3-usb2: Check dr_mode when not using OTG,
Chris Brandt
- [PATCH v4 07/13] usb: renesas_usbhs: add support for CNEN bit,
Chris Brandt
- [PATCH v4 05/13] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support,
Chris Brandt
- [PATCH v4 11/13] ARM: dts: r7s9210: Add USB Host support,
Chris Brandt
- [PATCH v4 04/13] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode,
Chris Brandt
- [PATCH v4 06/13] usb: renesas_usbhs: move flags to param,
Chris Brandt
- [PATCH v4 13/13] ARM: dts: rza2mevb: Add USB Host support,
Chris Brandt
- [PATCH] phy: renesas: phy-rcar-gen2: Fix the array off by one warning,
Biju Das
- [PATCH v6 0/7] Add USB3.0 and TI HD3SS3220 driver support,
Biju Das
- [PATCH 0/2] Document HopeRun RZ/G2M boards,
Fabrizio Castro
- [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux,
marek . vasut
- [PATCH] net: sh_eth: fix mdio access in sh_eth_close() for some SoCs,
Yoshihiro Shimoda
- [PATCH v3] serial: sh-sci: disable DMA for uart_console,
George G. Davis
- [PATCH V4] ARM: mach-shmobile: Don't init CNTVOFF/counter if PSCI is available,
Oleksandr Tyshchenko
- [PATCH] scripts/spelling.txt: Add spelling fix for prohibited,
Chris Paterson
- [PATCH v3 00/15] usb: Add host and device support for RZ/A2,
Chris Brandt
- [PATCH v3 04/15] dt-bindings: rcar-gen3-phy-usb2: Document use of usb_x1,
Chris Brandt
- [PATCH v3 02/15] ARM: dts: rza2mevb: Add 48MHz USB clock,
Chris Brandt
- [PATCH v3 12/15] dt-bindings: usb: renesas_usbhs: Add support for r7s9210,
Chris Brandt
- [PATCH v3 08/15] usb: renesas_usbhs: move flags to param,
Chris Brandt
- [PATCH v3 11/15] usb: renesas_usbhs: Add support for RZ/A2,
Chris Brandt
- [PATCH v3 06/15] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode,
Chris Brandt
- [PATCH v3 15/15] ARM: dts: rza2mevb: Add USB host support,
Chris Brandt
- [PATCH v3 13/15] ARM: dts: r7s9210: Add USB Host support,
Chris Brandt
- [PATCH v3 10/15] usb: renesas_usbhs: support byte addressable CFIFO,
Chris Brandt
- [PATCH v3 14/15] ARM: dts: r7s9210: Add USB Device support,
Chris Brandt
- [PATCH v3 01/15] ARM: dts: r7s9210: Add USB clock,
Chris Brandt
- [PATCH v3 07/15] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support,
Chris Brandt
- [PATCH v3 03/15] phy: renesas: rcar-gen3-usb2: detect usb_x1 clock,
Chris Brandt
- [PATCH v3 09/15] usb: renesas_usbhs: add support for CNEN bit,
Chris Brandt
- [PATCH v3 05/15] phy: renesas: rcar-gen3-usb2: Check dr_mode when not using OTG,
Chris Brandt
- [PATCH/RFC v2] ARM: dts: r8a7791: Move enable-method to CPU nodes,
Geert Uytterhoeven
- [PATCH v4 0/4] media: vsp1: Phased partition overlap support,
Kieran Bingham
- [PATCH/RFT v3 0/3] thermal: rcar_gen3_thermal: Update calculation formula due to HW evaluation,
Yoshihiro Kaneko
- [PATCH v2] serial: sh-sci: disable DMA for uart_console,
George G. Davis
- [PATCH 00/11] pinctrl: sh-pfc: Convert to new non-GPIO helper macros,
Geert Uytterhoeven
- [PATCH 10/11] pinctrl: sh-pfc: sh73a0: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 11/11] pinctrl: sh-pfc: Remove obsolete SH_PFC_PIN_NAMED*() macros,
Geert Uytterhoeven
- [PATCH 01/11] pinctrl: sh-pfc: Add new non-GPIO helper macros,
Geert Uytterhoeven
- [PATCH 03/11] pinctrl: sh-pfc: r8a7778: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 09/11] pinctrl: sh-pfc: r8a77990: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 06/11] pinctrl: sh-pfc: r8a7795: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 07/11] pinctrl: sh-pfc: r8a7796: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 02/11] pinctrl: sh-pfc: emev2: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 08/11] pinctrl: sh-pfc: r8a77965: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 04/11] pinctrl: sh-pfc: r8a7790: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- [PATCH 05/11] pinctrl: sh-pfc: r8a7795-es1: Use new macros for non-GPIO pins,
Geert Uytterhoeven
- Re: [PATCH 00/11] pinctrl: sh-pfc: Convert to new non-GPIO helper macros,
Geert Uytterhoeven
- Re: [PATCH 00/11] pinctrl: sh-pfc: Convert to new non-GPIO helper macros,
Niklas Söderlund
- Re: [PATCH 00/11] pinctrl: sh-pfc: Convert to new non-GPIO helper macros,
Geert Uytterhoeven
- [PATCH v2] dmaengine: sudmac: remove unused driver,
Simon Horman
- [PATCH v2 0/2] mmc: renesas_sdhi: improve performance by using IOMMU,
Yoshihiro Shimoda
- [PATCH v2] usb: renesas_usbhs: Use specific struct instead of USBHS_TYPE_* enums,
Yoshihiro Shimoda
- [PATCH v2 00/10] R-Car DU: LVDS dual-link mode support,
Laurent Pinchart
- [PATCH v2 01/10] drm: bridge: Add dual_link field to the drm_bridge_timings structure,
Laurent Pinchart
- [PATCH v2 02/10] dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation,
Laurent Pinchart
- [PATCH v2 03/10] drm: bridge: thc63: Report input bus mode through bridge timings,
Laurent Pinchart
- [PATCH v2 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property,
Laurent Pinchart
- [PATCH v2 05/10] drm: rcar-du: lvds: Remove LVDS double-enable checks,
Laurent Pinchart
- [PATCH v2 06/10] drm: rcar-du: lvds: Add support for dual-link mode,
Laurent Pinchart
- [PATCH v2 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode,
Laurent Pinchart
- [PATCH v2 08/10] arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1,
Laurent Pinchart
- [PATCH v2 09/10] [HACK] arm64: dts: renesas: draak: Enable LVDS dual-link operation,
Laurent Pinchart
- [PATCH v2 10/10] [HACK] arm64: dts: renesas: ebisu: Enable LVDS dual-link operation,
Laurent Pinchart
- Re: [PATCH v2 00/10] R-Car DU: LVDS dual-link mode support,
Geert Uytterhoeven
- Re: [PATCH v2 00/10] R-Car DU: LVDS dual-link mode support,
Jacopo Mondi
- Re: [PATCH] media: i2c: adv748x: initialize bit 7 of csi_tx_top_reg_1f,
Kieran Bingham
- [RFC PATCH] ARM: mach-shmobile: Parse DT to get ARCH timer memory region,
Oleksandr Tyshchenko
- [PATCH V3] ARM: mach-shmobile: Don't init CNTVOFF if PSCI is available,
Oleksandr Tyshchenko
- [PATCH 0/2] pinctrl: sh-pfc: r8a7778: Use common PORT_GP_CFG_27() macro,
Geert Uytterhoeven
- [PATCH] usb: renesas_usbhs: Use specific struct instead of USBHS_TYPE_* enums,
Yoshihiro Shimoda
- [PATCH net 4/5] net: ethernet: fix similar warning reported by kbuild test robot,
Petr Štetiar
- [PATCH v2 00/15] usb: Add host and device support for RZ/A2,
Chris Brandt
- [PATCH v2 03/15] phy: renesas: rcar-gen3-usb2: detect usb_x1 clock,
Chris Brandt
- [PATCH v2 06/15] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode,
Chris Brandt
- [PATCH v2 09/15] usb: renesas_usbhs: add support for CNEN bit,
Chris Brandt
- [PATCH v2 05/15] phy: renesas: rcar-gen3-usb2: Check dr_mode when not using OTG,
Chris Brandt
- [PATCH v2 14/15] ARM: dts: r7s9210: Add USB Device support,
Chris Brandt
- [PATCH v2 10/15] usb: renesas_usbhs: support byte addressable CFIFO,
Chris Brandt
- [PATCH v2 04/15] dt-bindings: rcar-gen3-phy-usb2: Document use of usb_x1,
Chris Brandt
- [PATCH v2 11/15] usb: renesas_usbhs: Add support for RZ/A2,
Chris Brandt
- [PATCH v2 01/15] ARM: dts: r7s9210: Add USB clock,
Chris Brandt
- [PATCH v2 12/15] dt-bindings: usb: renesas_usbhs: Add support for r7s9210,
Chris Brandt
- [PATCH v2 02/15] ARM: dts: rza2mevb: Add 48MHz USB clock,
Chris Brandt
- [PATCH v2 07/15] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support,
Chris Brandt
- [PATCH v2 15/15] ARM: dts: rza2mevb: Add USB host support,
Chris Brandt
- [PATCH v2 08/15] usb: renesas_usbhs: move flags macros,
Chris Brandt
- [PATCH v2 13/15] ARM: dts: r7s9210: Add USB Host support,
Chris Brandt
- [PATCH repost 0/5] Repost CAN and CANFD dt-bindings,
Fabrizio Castro
- [PATCH] dmaengine: sudmac: remove unused driver,
Simon Horman
- [PATCH repost] dt-bindings: timer: renesas, cmt: Document r8a779{5|65|90} CMT support,
Simon Horman
- [PATCH v3 0/2] arm64: dts: renesas: r8a7795: Add IPA support and dynamic power coefficient,
Simon Horman
- [PATCH] drm: rcar-du: add modifiers support,
Tomohito Esaki
- [RFC 0/9] drm: rcar-du: Add CMM support to M3-W (plumbing only),
Jacopo Mondi
- [RFC 1/9] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation,
Jacopo Mondi
- [RFC 2/9] dt-bindings: display, renesas,du: Document cmms property,
Jacopo Mondi
- [RFC 3/9] [TODO] drm: rcar-du: Add basic support for CMM,
Jacopo Mondi
- [RFC 4/9] drm: rcar-du: kms: Create CMM instances,
Jacopo Mondi
- [RFC 5/9] drm: rcar-du: Add CMM support for M3-W,
Jacopo Mondi
- [RFC 6/9] drm: rcar-du: crtc: Setup the CMM,
Jacopo Mondi
- [RFC 7/9] drm: rcar-du: group: Enable CMM unit,
Jacopo Mondi
- [RFC 8/9] clk: renesas: r8a7796: Add CMM clocks,
Jacopo Mondi
- [RFC 9/9] arm64: dts: renesas: r8a7796: Add CMM units,
Jacopo Mondi
- [PATCH v4 04/11] drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state,
Sean Paul
- [PATCH] ravb: implement MTU change while device is up,
Ulrich Hecht
- [PATCH v2 0/4] sh-pfc: r8a7795/6/65: Add TPU pins, groups and functions,
Geert Uytterhoeven
- [PATCH v2 4/4] pinctrl: sh-pfc: r8a77965: Add TPU pins, groups and functions,
Geert Uytterhoeven
- [PATCH v2 2/4] pinctrl: sh-pfc: r8a7795: Add TPU pins, groups and functions,
Geert Uytterhoeven
- [PATCH v2 1/4] pinctrl: sh-pfc: r8a7795-es1: Add TPU pins, groups and functions,
Geert Uytterhoeven
- [PATCH v2 3/4] pinctrl: sh-pfc: r8a7796: Add TPU pins, groups and functions,
Geert Uytterhoeven
- Re: [PATCH v2 0/4] sh-pfc: r8a7795/6/65: Add TPU pins, groups and functions,
Simon Horman
- [PATCH v2] arm64: dts: renesas: r8a7795: Create thermal zone to support IPA,
Simon Horman
- [PATCH v2] thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs,
Simon Horman
- [renesas-drivers:master 35/44] drivers/net/ethernet/marvell/sky2.c:4808:3: note: in expansion of macro 'memcpy',
kbuild test robot
- renesas-drivers-2019-05-07-v5.1,
Geert Uytterhoeven
- Automated/remote flashing of R-Car3,
Eugeniu Rosca
- Re: [PATCH v4 2/3] spi-nor: s25fl512s supports region locking,
Geert Uytterhoeven
- Re: [PATCH net-next v2 0/4] of_get_mac_address ERR_PTR fixes,
Geert Uytterhoeven
- [PATCH 00/10] usb: Add host and device support for RZ/A2,
Chris Brandt
- [PATCH 01/10] phy: renesas: rcar-gen3-usb2: Add uses_usb_x1 option,
Chris Brandt
- [PATCH 02/10] dt-bindings: rcar-gen3-phy-usb2: Document uses_usb_x1,
Chris Brandt
- [PATCH 03/10] phy: renesas: rcar-gen3-usb2: Check dr_mode when not using OTG,
Chris Brandt
- [PATCH 04/10] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode,
Chris Brandt
- [PATCH 05/10] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support,
Chris Brandt
- [PATCH 06/10] usb: renesas_usbhs: Add support for RZ/A2,
Chris Brandt
- [PATCH 07/10] dt-bindings: usb: renesas_usbhs: Add support for r7s9210,
Chris Brandt
- [PATCH 08/10] ARM: dts: r7s9210: Add USB Host support,
Chris Brandt
- [PATCH 09/10] ARM: dts: r7s9210: Add USB Device support,
Chris Brandt
- [PATCH 10/10] ARM: dts: r7s9210-rza2mevb: Add USB host support,
Chris Brandt
- RE: [PATCH 00/10] usb: Add host and device support for RZ/A2,
Yoshihiro Shimoda
- [PATCH] ARM: dts: r7s9210-rza2mevb: add ethernet aliases,
Chris Brandt
- [PATCH 0/6] Zap SCIF2 DMA configuration in R-Car Gen3 DTS,
Eugeniu Rosca
[PATCH 3/6] arm64: dts: renesas: r8a7795: zap dma configuration in scif2,
Eugeniu Rosca
[PATCH 4/6] Revert "arm64: dts: renesas: r8a77965: Enable DMA for SCIF2",
Eugeniu Rosca
[PATCH 5/6] Revert "arm64: dts: renesas: r8a77990: Enable DMA for SCIF2",
Eugeniu Rosca
[PATCH 6/6] Revert "arm64: dts: renesas: r8a77995: add DMA for SCIF2",
Eugeniu Rosca
How do I tell a dual role PHY to always be host or peripheral?,
Chris Brandt
[PATCH] pinctrl: sh-pfc: r8a77970: Remove MMC_{CD,WP},
Geert Uytterhoeven
[PATCH V2] ARM: mach-shmobile: Don't init CNTVOFF if PSCI is available,
Oleksandr Tyshchenko
[PATCH 0/4] pinctrl: sh-pfc: r8a7795/6/65: Add TPU pins, groups and functions,
Geert Uytterhoeven
[PATCH v3 05/10] net: ethernet: support of_get_mac_address new ERR_PTR error,
Petr Štetiar
[PATCH v3 04/10] drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state,
Sean Paul
[PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux,
marek . vasut
[PATCH v3 0/5] ARM: rskrza1: Add RZ/A1 IRQC and input switches,
Geert Uytterhoeven
[PATCH] clk: renesas: Use the correct style for SPDX License Identifier,
Nishad Kamdar
[PATCH 0/7] dts: r7s9210: Add RZ/A2 devices,
Chris Brandt
[renesas-drivers:master 38/41] drivers/media/usb/au0828/au0828-core.c:514:29: error: passing argument 1 of '__media_pipeline_stop' from incompatible pointer type,
kbuild test robot
[renesas-drivers:master 11/41] drivers/gpu/drm/virtio/virtgpu_prime.c:43:18: error: redefinition of 'virtgpu_gem_prime_get_sg_table',
kbuild test robot
[PATCH v2 0/5] ARM: rskrza1: Add RZ/A1 IRQC and input switches,
Geert Uytterhoeven
renesas-drivers-2019-04-30-v5.1-rc7,
Geert Uytterhoeven
[PATCH] iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printing,
Geert Uytterhoeven
[PATCH] sata_rcar: Remove ata_host_alloc() error printing,
Geert Uytterhoeven
[PATCH 0/5] irqchip/renesas-irqc: Miscellaneous cleanups and improvements,
Geert Uytterhoeven
[PATCH] irqchip/renesas-intc-irqpin: Remove devm_kzalloc() error printing,
Geert Uytterhoeven
[PATCH RESEND] dt-bindings: usb: renesas_usbhs: Add support for r8a77470,
Biju Das
[PATCH 0/5] ARM: rskrza1: Add RZ/A1 IRQC and input switches,
Geert Uytterhoeven
[PATCH 0/3] mmc: renesas_sdhi_internal_dmac: improve performance by using IOMMU,
Yoshihiro Shimoda
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announcements]
[Kernel Newbies]
[Linux RAID]
[Linux ATA RAID]
[Git]
[Linux Netdev]
[Netfilter]