Linux Renesas SOC Development

• Date Index

• [PATCH 1/3] ARM: dts: r8a7790: Correct critical CPU temperature, (continued)
  • [PATCH 1/3] ARM: dts: r8a7790: Correct critical CPU temperature, Chris Paterson
    • Re: [PATCH 1/3] ARM: dts: r8a7790: Correct critical CPU temperature, Geert Uytterhoeven
  • [PATCH 2/3] ARM: dts: r8a7791: Correct critical CPU temperature, Chris Paterson
    • Re: [PATCH 2/3] ARM: dts: r8a7791: Correct critical CPU temperature, Geert Uytterhoeven
  • [PATCH 3/3] ARM: dts: r8a7793: Correct critical CPU temperature, Chris Paterson
    • Re: [PATCH 3/3] ARM: dts: r8a7793: Correct critical CPU temperature, Geert Uytterhoeven
• [RFC PATCH 0/3] [RFC] Video HDMI Loop-back Test, Kieran Bingham
  • [RFC PATCH 1/3] kms-tests: Provide .gitignore, Kieran Bingham
    • Re: [RFC PATCH 1/3] kms-tests: Provide .gitignore, Kieran Bingham
  • [RFC PATCH 2/3] rcar_vin: Provide VIN configuration helpers, Kieran Bingham
  • [RFC PATCH 3/3] tests: Add a DU->VIN loopback test, Kieran Bingham
• [PATCH 0/4] kms++util: Provide validation helpers, Kieran Bingham
  • [PATCH 1/4] videodevice: Fix minor spacing, Kieran Bingham
    • Re: [PATCH 1/4] videodevice: Fix minor spacing, Laurent Pinchart
  • [PATCH 2/4] py: pyvid: Provide stream_off binding, Kieran Bingham
    • Re: [PATCH 2/4] py: pyvid: Provide stream_off binding, Laurent Pinchart
  • [PATCH 3/4] kms++util: Add verification module, Kieran Bingham
    • Re: [PATCH 3/4] kms++util: Add verification module, Tomi Valkeinen
      • Re: [PATCH 3/4] kms++util: Add verification module, Kieran Bingham
        • Re: [PATCH 3/4] kms++util: Add verification module, Laurent Pinchart
          • Re: [PATCH 3/4] kms++util: Add verification module, Tomi Valkeinen
            • Re: [PATCH 3/4] kms++util: Add verification module, Laurent Pinchart
              • Re: [PATCH 3/4] kms++util: Add verification module, Tomi Valkeinen
                • Re: [PATCH 3/4] kms++util: Add verification module, Laurent Pinchart
                  • Re: [PATCH 3/4] kms++util: Add verification module, Tomi Valkeinen
              • Re: [PATCH 3/4] kms++util: Add verification module, Geert Uytterhoeven
        • Re: [PATCH 3/4] kms++util: Add verification module, Tomi Valkeinen
  • [PATCH 4/4] kms++util: Add frame compare functionality, Kieran Bingham
    • Re: [PATCH 4/4] kms++util: Add frame compare functionality, Geert Uytterhoeven
      • Re: [PATCH 4/4] kms++util: Add frame compare functionality, Kieran Bingham
    • Re: [PATCH 4/4] kms++util: Add frame compare functionality, Tomi Valkeinen
      • Re: [PATCH 4/4] kms++util: Add frame compare functionality, Kieran Bingham
    • Re: [PATCH 4/4] kms++util: Add frame compare functionality, Laurent Pinchart
  • Re: [PATCH 0/4] kms++util: Provide validation helpers, Kieran Bingham
  • Re: [PATCH 0/4] kms++util: Provide validation helpers, Tomi Valkeinen
    • Re: [PATCH 0/4] kms++util: Provide validation helpers, Kieran Bingham
• [PATCH 0/4] spi: sh-msiof: Multi-slave enhancements, Geert Uytterhoeven
  • [PATCH 1/4] spi: sh-msiof: Avoid writing to registers from spi_master.setup(), Geert Uytterhoeven
    • Applied "spi: sh-msiof: Avoid writing to registers from spi_master.setup()" to the spi tree, Mark Brown
  • [PATCH 2/4] spi: sh-msiof: Extend support to 3 native chip selects, Geert Uytterhoeven
    • Applied "spi: sh-msiof: Extend support to 3 native chip selects" to the spi tree, Mark Brown
  • [PATCH 4/4] spi: sh-msiof: Document hardware limitations related to chip selects, Geert Uytterhoeven
    • Re: [PATCH 4/4] spi: sh-msiof: Document hardware limitations related to chip selects, Mark Brown
    • Applied "spi: sh-msiof: Document hardware limitations related to chip selects" to the spi tree, Mark Brown
  • [PATCH 3/4] spi: sh-msiof: Implement cs-gpios configuration, Geert Uytterhoeven
    • Applied "spi: sh-msiof: Implement cs-gpios configuration" to the spi tree, Mark Brown
• [PATCH 0/5] Add debug output to v4l2-async, Jacopo Mondi
  • [PATCH 1/5] v4l: async: Use endpoint node, not device node, for fwnode match, Jacopo Mondi
    • Re: [PATCH 1/5] v4l: async: Use endpoint node, not device node, for fwnode match, Laurent Pinchart
  • [PATCH 2/5] device property: Add fwnode_get_name() operation, Jacopo Mondi
    • Re: [PATCH 2/5] device property: Add fwnode_get_name() operation, Sakari Ailus
    • Re: [PATCH 2/5] device property: Add fwnode_get_name() operation, Laurent Pinchart
  • [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier, Jacopo Mondi
    • Re: [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier, Sakari Ailus
      • Re: [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier, Laurent Pinchart
  • [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Jacopo Mondi
    • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Sakari Ailus
      • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, jacopo mondi
    • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Kieran Bingham
      • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Kieran Bingham
    • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Laurent Pinchart
      • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Sakari Ailus
        • Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration, Laurent Pinchart
  • [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module, Jacopo Mondi
    • Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module, Sakari Ailus
      • Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module, jacopo mondi
        • Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module, Sakari Ailus
      • Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module, Laurent Pinchart
• [PATCH 0/2] Add thermal support for iWave RZ/G1M board, Biju Das
  • [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743, Biju Das
    • Re: [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743, Geert Uytterhoeven
    • Re: [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743, Rob Herring
  • [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT, Biju Das
    • Re: [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT, Geert Uytterhoeven
      • RE: [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT, Biju Das
• [PATCH 0/4] usb: renesas_usbhs: add extcon notifier for non-otg channel, Yoshihiro Shimoda
  • [PATCH 1/4] usb: renesas_usbhs: Add a function to write the UGCTRL2 register, Yoshihiro Shimoda
  • [PATCH 2/4] usb: renesas_usbhs: add a new callback for extcon notifier, Yoshihiro Shimoda
  • [PATCH 3/4] usb: renesas_usbhs: set the mode by using extcon state for non-otg channel, Yoshihiro Shimoda
  • [PATCH 4/4] usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel, Yoshihiro Shimoda
• [PATCH 0/5] phy: renesas: rcar-gen3-usb2: add gpio handling for R-Car D3, Yoshihiro Shimoda
  • [PATCH 3/5] phy: renesas: rcar-gen3-usb2: use prefix "has_otg_pins_" for dedicated pins handling, Yoshihiro Shimoda
  • [PATCH 1/5] phy: renesas: rcar-gen3-usb2: call INIT_WORK() anyway, Yoshihiro Shimoda
  • [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling, Yoshihiro Shimoda
    • Re: [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling, Sergei Shtylyov
      • RE: [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling, Yoshihiro Shimoda
  • [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling, Yoshihiro Shimoda
    • Re: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling, Geert Uytterhoeven
      • RE: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling, Yoshihiro Shimoda
  • [PATCH 4/5] phy: renesas: rcar-gen3-usb2: add rcar_gen3_role_swap_ops, Yoshihiro Shimoda
• [BUG] renesas/ravb: two possible sleep-in-atomic bugs in ravb_set_link_ksettings and ravb_nway_reset, Jia-Ju Bai
• [BUG] renesas/sh_eth: two possible sleep-in-atomic bugs in sh_eth_set_link_ksettings and sh_eth_nway_reset, Jia-Ju Bai
• [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE, Yoshihiro Shimoda
  • Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE, Simon Horman
  • Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE, Wolfram Sang
  • Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE, Ulf Hansson
• Hang on Salvator-X(S) with v4.15-rc3, Geert Uytterhoeven
• Re: [PATCH] gpio: Add helpers to determin direction of gpiods, Wolfram Sang
  • Re: [PATCH] gpio: Add helpers to determin direction of gpiods, Linus Walleij
    • Re: [PATCH] gpio: Add helpers to determin direction of gpiods, Wolfram Sang
• [PATCH 0/3] Add CMT support to r8a774[35], Fabrizio Castro
  • [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support, Fabrizio Castro
    • Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support, Simon Horman
      • RE: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support, Fabrizio Castro
    • Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support, Geert Uytterhoeven
    • Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support, Rob Herring
  • [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Fabrizio Castro
    • Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Simon Horman
      • RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Fabrizio Castro
        • Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Geert Uytterhoeven
          • RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Fabrizio Castro
            • Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Simon Horman
              • RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support, Fabrizio Castro
  • [PATCH 3/3] ARM: dts: r8a7745: Add CMT SoC specific support, Fabrizio Castro
    • Re: [PATCH 3/3] ARM: dts: r8a7745: Add CMT SoC specific support, Simon Horman
• [PATCH 0/5] Add Sound support for iWave RZ/G1M board, Biju Das
  • [PATCH 1/5] ARM: shmobile: defconfig: Enable SGTL5000 audio codec, Biju Das
  • [PATCH 2/5] ARM: dts: r8a7743: Add audio clocks, Biju Das
  • [PATCH 3/5] ARM: dts: r8a7743: Add audio DMAC support, Biju Das
  • [PATCH 4/5] ARM: dts: r8a7743: Add sound support, Biju Das
  • [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec, Biju Das
    • Re: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec, Simon Horman
      • RE: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec, Biju Das
        • Re: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec, Simon Horman
  • Re: [PATCH 0/5] Add Sound support for iWave RZ/G1M board, Simon Horman
    • RE: [PATCH 0/5] Add Sound support for iWave RZ/G1M board, Biju Das
      • Re: [PATCH 0/5] Add Sound support for iWave RZ/G1M board, Simon Horman
• [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Biju Das
  • Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Geert Uytterhoeven
  • Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Mark Brown
    • Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Geert Uytterhoeven
      • Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Mark Brown
        • RE: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35], Biju Das
  • [PATCH v2] ASoC: rsnd: Add device tree support for r8a774[35], Biju Das
    • Re: [PATCH v2] ASoC: rsnd: Add device tree support for r8a774[35], Geert Uytterhoeven
  • Applied "ASoC: rsnd: Add device tree support for r8a774[35]" to the asoc tree, Mark Brown
• renesas-drivers-2017-12-12-v4.15-rc3, Geert Uytterhoeven
• arm64: unhandled level 0 translation fault, Geert Uytterhoeven
  • Re: arm64: unhandled level 0 translation fault, Will Deacon
    • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
      • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
        • Re: arm64: unhandled level 0 translation fault, Will Deacon
          • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
            • Re: arm64: unhandled level 0 translation fault, Will Deacon
  • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
    • Re: arm64: unhandled level 0 translation fault, Will Deacon
    • Re: arm64: unhandled level 0 translation fault, Dave P Martin
      • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
        • Re: arm64: unhandled level 0 translation fault, Dave Martin
          • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
            • Re: arm64: unhandled level 0 translation fault, Will Deacon
              • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
              • Re: arm64: unhandled level 0 translation fault, Geert Uytterhoeven
                • Re: arm64: unhandled level 0 translation fault, Will Deacon
            • Re: arm64: unhandled level 0 translation fault, Dave Martin
• [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically, Simon Horman
  • Re: [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically, Geert Uytterhoeven
    • Re: [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically, Simon Horman
• [PATCH 0/3] arm64: dts: renesas: r8a7796: cleanup of make dtb W=1, Simon Horman
  • [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes, Simon Horman
    • Re: [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes, Geert Uytterhoeven
      • Re: [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes, Simon Horman
  • [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically, Simon Horman
    • Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically, Geert Uytterhoeven
      • Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically, Simon Horman
      • Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically, Simon Horman
  • [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus, Simon Horman
    • Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus, Geert Uytterhoeven
      • Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus, Simon Horman
        • Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus, Geert Uytterhoeven
          • Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus, Simon Horman
• [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled", Geert Uytterhoeven
  • Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled", Niklas Söderlund
  • Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled", Sergei Shtylyov
  • Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled", David Miller
• [renesas-drivers:topic/renesas-overlays 8/91] drivers//of/configfs.c:48:2: error: implicit declaration of function 'of_fdt_unflatten_tree'; did you mean 'of_pdt_build_devicetree'?, kbuild test robot
• [PATCH v3] net: sh_eth: do not advertise Gigabit capabilities when not available, Thomas Petazzoni
  • Re: [PATCH v3] net: sh_eth: do not advertise Gigabit capabilities when not available, David Miller
• [PATCH 0/2] of: overlay: Crash fix and improvement, Geert Uytterhoeven
  • [PATCH 2/2] of: overlay: Make node skipping in init_overlay_changeset() clearer, Geert Uytterhoeven
  • [PATCH 1/2] of: overlay: Fix out-of-bounds write in init_overlay_changeset(), Geert Uytterhoeven
  • Re: [PATCH 0/2] of: overlay: Crash fix and improvement, Rob Herring
    • Re: [PATCH 0/2] of: overlay: Crash fix and improvement, Geert Uytterhoeven
  • Re: [PATCH 0/2] of: overlay: Crash fix and improvement, Frank Rowand
    • Re: [PATCH 0/2] of: overlay: Crash fix and improvement, Geert Uytterhoeven
      • Re: [PATCH 0/2] of: overlay: Crash fix and improvement, Frank Rowand
• [PATCH v9 00/28] rcar-vin: Add Gen3 with media controller, Niklas Söderlund
  • [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation, Niklas Söderlund
    • Re: [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation, Laurent Pinchart
      • Re: [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation, Niklas Söderlund
  • [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Niklas Söderlund
    • Re: [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Laurent Pinchart
      • Re: [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Niklas Söderlund
  • [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode, Niklas Söderlund
    • Re: [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode, Laurent Pinchart
  • [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value, Niklas Söderlund
    • Re: [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value, Laurent Pinchart
      • Re: [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value, Niklas Söderlund
  • [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info, Niklas Söderlund
    • Re: [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info, Laurent Pinchart
  • [PATCH v9 26/28] rcar-vin: enable support for r8a7795, Niklas Söderlund
    • Re: [PATCH v9 26/28] rcar-vin: enable support for r8a7795, Laurent Pinchart
  • [PATCH v9 28/28] rcar-vin: enable support for r8a77970, Niklas Söderlund
  • [PATCH v9 21/28] rcar-vin: add group allocator functions, Niklas Söderlund
    • Re: [PATCH v9 21/28] rcar-vin: add group allocator functions, Laurent Pinchart
      • Re: [PATCH v9 21/28] rcar-vin: add group allocator functions, Niklas Söderlund
        • Re: [PATCH v9 21/28] rcar-vin: add group allocator functions, Laurent Pinchart
  • [PATCH v9 18/28] rcar-vin: break out format alignment and checking, Niklas Söderlund
    • Re: [PATCH v9 18/28] rcar-vin: break out format alignment and checking, Laurent Pinchart
      • Re: [PATCH v9 18/28] rcar-vin: break out format alignment and checking, Niklas Söderlund
  • [PATCH v9 27/28] rcar-vin: enable support for r8a7796, Niklas Söderlund
    • Re: [PATCH v9 27/28] rcar-vin: enable support for r8a7796, Laurent Pinchart
  • [PATCH v9 24/28] rcar-vin: add link notify for Gen3, Niklas Söderlund
  • [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller, Niklas Söderlund
    • Re: [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller, Laurent Pinchart
  • [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration, Niklas Söderlund
    • Re: [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration, Laurent Pinchart
      • Re: [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration, Niklas Söderlund
  • [PATCH v9 23/28] rcar-vin: parse Gen3 OF and setup media graph, Niklas Söderlund
  • [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info, Niklas Söderlund
    • Re: [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info, Laurent Pinchart
  • [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Niklas Söderlund
    • Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Laurent Pinchart
      • Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Hans Verkuil
        • Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Laurent Pinchart
      • Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Niklas Söderlund
        • Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode, Laurent Pinchart
  • [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization, Niklas Söderlund
    • Re: [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization, Laurent Pinchart
  • [PATCH v9 08/28] rcar-vin: move functions regarding scaling, Niklas Söderlund
    • Re: [PATCH v9 08/28] rcar-vin: move functions regarding scaling, Laurent Pinchart
  • [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic, Niklas Söderlund
    • Re: [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic, Laurent Pinchart
      • Re: [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic, Niklas Söderlund
  • [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Niklas Söderlund
    • Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Laurent Pinchart
      • Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Niklas Söderlund
        • Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Laurent Pinchart
          • Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Niklas Söderlund
  • [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Niklas Söderlund
    • Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Laurent Pinchart
      • Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Niklas Söderlund
        • Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Laurent Pinchart
          • Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Niklas Söderlund
  • [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed, Niklas Söderlund
    • Re: [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed, Laurent Pinchart
  • [PATCH v9 07/28] rcar-vin: change name of video device, Niklas Söderlund
    • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Laurent Pinchart
      • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Sakari Ailus
        • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Laurent Pinchart
          • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Niklas Söderlund
            • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Laurent Pinchart
              • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Niklas Söderlund
                • Re: [PATCH v9 07/28] rcar-vin: change name of video device, Laurent Pinchart
  • [PATCH v9 06/28] rcar-vin: move max width and height information to chip information, Niklas Söderlund
    • Re: [PATCH v9 06/28] rcar-vin: move max width and height information to chip information, Laurent Pinchart
  • [PATCH v9 10/28] rcar-vin: do not reset crop and compose when setting format, Niklas Söderlund
  • [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Niklas Söderlund
    • Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Laurent Pinchart
      • Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Hans Verkuil
        • Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Laurent Pinchart
      • Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Niklas Söderlund
        • Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal, Laurent Pinchart
  • [PATCH v9 05/28] rcar-vin: move chip information to own struct, Niklas Söderlund
    • Re: [PATCH v9 05/28] rcar-vin: move chip information to own struct, Laurent Pinchart
  • [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks, Niklas Söderlund
    • Re: [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks, Laurent Pinchart
• [PATCH] kmstest.py: Update to th latest kmsxx Python bindings, Laurent Pinchart
  • Re: [PATCH] kmstest.py: Update to th latest kmsxx Python bindings, Kieran Bingham
• Re: issue on rcar-du and/or vsp suspend-resume paths, Kieran Bingham
  • Re: issue on rcar-du and/or vsp suspend-resume paths, Nikita Yushchenko
• [PATCH 0/2] ARM: dts: r8a7743: Timer node nodes out of bus, Simon Horman
  • [PATCH 2/2] ARM: dts: r8a7743: move timer node out of bus, Simon Horman
  • [PATCH 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically, Simon Horman
• [PATCH 0/2] PCI: rcar: Misc error path fixes, Geert Uytterhoeven
  • [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures, Geert Uytterhoeven
    • Re: [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures, Lorenzo Pieralisi
    • Re: [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures, Lorenzo Pieralisi
  • [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path, Geert Uytterhoeven
    • Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path, Lorenzo Pieralisi
    • Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path, Bjorn Helgaas
      • Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path, Simon Horman
  • Re: [PATCH 0/2] PCI: rcar: Misc error path fixes, Simon Horman
  • Re: [PATCH 0/2] PCI: rcar: Misc error path fixes, Bjorn Helgaas
    • Re: [PATCH 0/2] PCI: rcar: Misc error path fixes, Geert Uytterhoeven
    • Re: [PATCH 0/2] PCI: rcar: Misc error path fixes, Lorenzo Pieralisi
• [PATCH] spi: rspi: Do not set SPCR_SPE in qspi_set_config_register(), Geert Uytterhoeven
  • Applied "spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()" to the spi tree, Mark Brown
• [PATCH 0/4] arm64: dts: renesas: r8a779[56] and salvator-common: add usb3_phy and enable usb3_peri0, Yoshihiro Shimoda
  • [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node, Yoshihiro Shimoda
    • Re: [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node, Simon Horman
  • [PATCH 2/4] arm64: dts: renesas: r8a7796: add usb3_phy node, Yoshihiro Shimoda
    • Re: [PATCH 2/4] arm64: dts: renesas: r8a7796: add usb3_phy node, Simon Horman
  • [PATCH 3/4] arm64: dts: renesas: salvator-common: enable usb3_phy0 node, Yoshihiro Shimoda
    • Re: [PATCH 3/4] arm64: dts: renesas: salvator-common: enable usb3_phy0 node, Simon Horman
  • [PATCH 4/4] arm64: dts: renesas: salvator-common: enable usb3_peri0, Yoshihiro Shimoda
    • Re: [PATCH 4/4] arm64: dts: renesas: salvator-common: enable usb3_peri0, Simon Horman
• [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.16, Simon Horman
  • [PATCH 04/54] arm64: dts: renesas: r8a77970: Add RWDT node, Simon Horman
  • [PATCH 02/54] arm64: dts: renesas: r8a7795: Use R-Car SDHI Gen3 fallback compat string, Simon Horman
  • [PATCH 01/54] arm64: dts: renesas: salvator: set driver type for eMMC, Simon Horman
  • [PATCH 03/54] arm64: dts: renesas: r8a7796: Use R-Car SDHI Gen3 fallback compat string, Simon Horman
  • [PATCH 05/54] arm64: dts: renesas: eagle: Move avb node to preserve sort order, Simon Horman
  • [PATCH 06/54] arm64: dts: renesas: eagle: Enable watchdog timer, Simon Horman
  • [PATCH 08/54] arm64: dts: renesas: r8a7796: Add IPMMU device nodes, Simon Horman
  • [PATCH 11/54] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0, Simon Horman
  • [PATCH 12/54] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0, Simon Horman
  • [PATCH 13/54] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0, Simon Horman
  • [PATCH 14/54] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM, Simon Horman
  • [PATCH 10/54] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP, Simon Horman
  • [PATCH 15/54] arm64: dts: renesas: ulcb-kf: enable USB2 PHY of channel 0, Simon Horman
  • [PATCH 16/54] arm64: dts: renesas: ulcb-kf: add dr_mode property for USB2.0 channel 0, Simon Horman
  • [PATCH 17/54] arm64: dts: renesas: r8a77995: add SYS-DMAC nodes, Simon Horman
  • [PATCH 18/54] arm64: dts: renesas: r8a77995: Add SDHI (MMC) support, Simon Horman
  • [PATCH 19/54] arm64: dts: renesas: r8a7795: Add IPMMU device nodes, Simon Horman
  • [PATCH 09/54] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1, Simon Horman
  • [PATCH 22/54] arm64: dts: renesas: r8a7795: Tie Audio-DMAC to IPMMU-MP0/1, Simon Horman
  • [PATCH 07/54] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W, Simon Horman
  • [PATCH 20/54] arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes, Simon Horman
  • [PATCH 21/54] arm64: dts: renesas: r8a7795: Tie SYS-DMAC to IPMMU-DS0/1, Simon Horman
  • [PATCH 26/54] arm64: dts: renesas: r8a7795-es1: Point FDP1 via FCPF to IPMMU-VP0, Simon Horman
  • [PATCH 25/54] arm64: dts: renesas: r8a7795: Point FDP1 via FCPF to IPMMU-VP0/1, Simon Horman
  • [PATCH 28/54] arm64: dts: renesas: r8a7795: Point VSPI via FCPVI to IPMMU-VP0/1, Simon Horman
  • [PATCH 23/54] arm64: dts: renesas: r8a7795: Point DU/VSPD via FCPVD to IPMMU-VI0/1, Simon Horman
  • [PATCH 27/54] arm64: dts: renesas: r8a7795: Point VSPBC/VSPBD via FCPVB to IPMMU-VP0/1, Simon Horman
  • [PATCH 24/54] arm64: dts: renesas: r8a7795-es1: Point DU/VSPD via FCPVD to IPMMU-VI0, Simon Horman
  • [PATCH 32/54] arm64: dts: renesas: r8a7795-es1: Enable IPMMU-MP1, Simon Horman
  • [PATCH 29/54] arm64: dts: renesas: r8a7795-es1: Point VSPI via FCPVI to IPMMU-VP, Simon Horman
  • [PATCH 30/54] arm64: dts: renesas: r8a7795: Connect Ethernet-AVB to IPMMU-DS0, Simon Horman
  • [PATCH 31/54] arm64: dts: renesas: r8a7795: Connect SATA to IPMMU-HC, Simon Horman
  • [PATCH 33/54] arm64: dts: renesas: r8a7795: Enable IPMMU-VI0, VP1, DS0, DS1 and MM, Simon Horman
  • [PATCH 34/54] arm64: dts: renesas: salvator-common: Add BD9571 PMIC, Simon Horman
  • [PATCH 35/54] arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header, Simon Horman
  • [PATCH 37/54] arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header, Simon Horman
  • [PATCH 36/54] arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header, Simon Horman
  • [PATCH 40/54] arm64: dts: renesas: r8a77995: Add CAN support, Simon Horman
  • [PATCH 42/54] arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29, Simon Horman
  • [PATCH 45/54] arm64: dts: renesas: r8a77970: Add IPMMU device nodes, Simon Horman
  • [PATCH 43/54] arm64: dts: renesas: r8a77970: sort includes, Simon Horman
  • [PATCH 46/54] arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1, Simon Horman
  • [PATCH 44/54] arm64: dts: renesas: r8a77995: add DMA for SCIF2, Simon Horman
  • [PATCH 48/54] arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM, Simon Horman
  • [PATCH 49/54] arm64: dts: renesas: r8a77995: Add IPMMU device nodes, Simon Horman
  • [PATCH 50/54] arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT, Simon Horman
  • [PATCH 39/54] arm64: dts: renesas: r8a77995: Add CAN external clock support, Simon Horman
  • [PATCH 52/54] arm64: dts: renesas: v3msk: add EtherAVB support, Simon Horman
  • [PATCH 47/54] arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT, Simon Horman
  • [PATCH 51/54] arm64: dts: renesas: initial V3MSK board device tree, Simon Horman
  • [PATCH 54/54] arm64: dts: renesas: r8a77970: use SYSC power domain macros, Simon Horman
  • [PATCH 53/54] arm64: dts: renesas: r8a77970: use CPG core clock macros, Simon Horman
  • [PATCH 38/54] arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header, Simon Horman
  • [PATCH 41/54] arm64: dts: renesas: r8a77995: Add CAN FD support, Simon Horman
  • Re: [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.16, Arnd Bergmann
• [PATCH] gpio: gpio-rcar: Support S2RAM, Yoshihiro Kaneko
  • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Geert Uytterhoeven
    • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Simon Horman
      • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Geert Uytterhoeven
        • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Geert Uytterhoeven
          • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Simon Horman
            • Re: [PATCH] gpio: gpio-rcar: Support S2RAM, Yoshihiro Kaneko
• [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Yoshihiro Kaneko
  • Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Geert Uytterhoeven
    • Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Simon Horman
      • Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Yoshihiro Kaneko
  • Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Sergei Shtylyov
  • Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes, Sergei Shtylyov
• [PATCH v5] v4l2-async: Match parent devices, Kieran Bingham
  • Re: [PATCH v5] v4l2-async: Match parent devices, jacopo mondi
    • Re: [PATCH v5] v4l2-async: Match parent devices, Kieran Bingham
  • Re: [PATCH v5] v4l2-async: Match parent devices, Sakari Ailus
    • Re: [PATCH v5] v4l2-async: Match parent devices, Kieran Bingham
• [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core, Fabrizio Castro
  • Re: [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core, Geert Uytterhoeven
    • Re: [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core, Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Updates for v4.16, Simon Horman
  • [PATCH 06/61] ARM: dts: r8a7793: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 05/61] ARM: dts: r8a7791: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 01/61] ARM: dts: r8a7743: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 07/61] ARM: dts: r8a7794: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 02/61] ARM: dts: r8a7745: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 11/61] ARM: dts: iwg22d: Add /dev/ttySC5 support, Simon Horman
  • [PATCH 08/61] ARM: dts: r8a7743: Add DU support, Simon Horman
  • [PATCH 09/61] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output, Simon Horman
  • [PATCH 17/61] ARM: dts: iwg22d-sodimm: Enable HS-USB, Simon Horman
  • [PATCH 13/61] ARM: dts: iwg22d-sodimm: sort dt nodes, Simon Horman
  • [PATCH 10/61] ARM: dts: iwg22d: Use /dev/ttySC3 as debug console, Simon Horman
  • [PATCH 12/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB, Simon Horman
  • [PATCH 04/61] ARM: dts: r8a7790: Use R-Car Gen2 Ether fallback compat string, Simon Horman
  • [PATCH 18/61] ARM: dts: r8a7745: Add IIC cores to dtsi, Simon Horman
  • [PATCH 21/61] ARM: dts: r8a7778: Use R-Car SDHI Gen1 fallback compat string, Simon Horman
  • [PATCH 16/61] ARM: dts: r8a7745: Enable DMA for HSUSB, Simon Horman
  • [PATCH 32/61] ARM: dts: r8a7745: Add CAN[01] SoC support, Simon Horman
  • [PATCH 25/61] ARM: dts: r8a7792: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 27/61] ARM: dts: r8a7794: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 35/61] ARM: dts: r8a7743: Add CAN[01] SoC support, Simon Horman
  • [PATCH 14/61] ARM: dts: r8a7745: Add HS-USB device node, Simon Horman
  • [PATCH 22/61] ARM: dts: r8a7779: Use R-Car SDHI Gen1 fallback compat string, Simon Horman
  • [PATCH 29/61] ARM: dts: koelsch: Move cec_clock to root node, Simon Horman
  • [PATCH 03/61] ARM: dts: r8a7778: Use R-Car Gen1 Ether fallback compat string, Simon Horman
  • [PATCH 23/61] ARM: dts: r8a7790: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 26/61] ARM: dts: r8a7793: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 38/61] ARM: dts: r8a7743: Add default PCIe bus clock, Simon Horman
  • [PATCH 30/61] ARM: dts: r8a7745: Add DU support, Simon Horman
  • [PATCH 28/61] ARM: dts: iwg20d-q7: Add support for ttySC3, Simon Horman
  • [PATCH 39/61] ARM: dts: r8a7743: Add PCIe Controller device node, Simon Horman
  • [PATCH 19/61] ARM: dts: r8a7743: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 31/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add HDMI video output, Simon Horman
  • [PATCH 34/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB, Simon Horman
  • [PATCH 36/61] ARM: dts: iwg20d-q7-common: Add can0 support to carrier board, Simon Horman
  • [PATCH 44/61] ARM: dts: genmai: Correct primary compatible value for eeprom, Simon Horman
  • [PATCH 37/61] ARM: dts: iwg20d-q7-dbcm-ca: Add can1 support to camera DB, Simon Horman
  • [PATCH 46/61] ARM: dts: r8a73a4: Update CMT compat string, Simon Horman
  • [PATCH 48/61] ARM: dts: r8a7791: Update CMT compat strings, Simon Horman
  • [PATCH 49/61] ARM: dts: r8a7793: Update CMT compat strings, Simon Horman
  • [PATCH 50/61] ARM: dts: r8a7794: Update CMT compat strings, Simon Horman
  • [PATCH 51/61] ARM: dts: r8a73a4: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 53/61] ARM: dts: r8a7790: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 54/61] ARM: dts: r8a7791: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 52/61] ARM: dts: r8a7740: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 56/61] ARM: dts: r8a7794: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 45/61] ARM: dts: r8a7794: Add SMP support, Simon Horman
  • [PATCH 61/61] ARM: dts: alt: Convert to named i2c-gpio bindings, Simon Horman
  • [PATCH 15/61] ARM: dts: r8a7745: Add USB-DMAC device nodes, Simon Horman
  • [PATCH 20/61] ARM: dts: r8a7745: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 41/61] ARM: dts: r8a7743: add VIN dt support, Simon Horman
  • [PATCH 55/61] ARM: dts: r8a7793: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 33/61] ARM: dts: iwg22d-sodimm: Add can0 support to carrier board, Simon Horman
  • [PATCH 60/61] ARM: dts: koelsch: Convert to named i2c-gpio bindings, Simon Horman
  • [PATCH 43/61] ARM: dts: koelsch: Correct primary compatible value for eeprom, Simon Horman
  • [PATCH 47/61] ARM: dts: r8a7790: Update CMT compat strings, Simon Horman
  • [PATCH 40/61] ARM: dts: iwg20d-q7: Enable PCIe Controller, Simon Horman
  • [PATCH 42/61] ARM: dts: r8a7745: add VIN dt support, Simon Horman
  • [PATCH 24/61] ARM: dts: r8a7791: Use R-Car SDHI Gen2 fallback compat string, Simon Horman
  • [PATCH 57/61] ARM: dts: sh73a0: Remove CMT renesas,channels-mask, Simon Horman
  • [PATCH 58/61] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings, Simon Horman
  • [PATCH 59/61] ARM: dts: lager: Convert to named i2c-gpio bindings, Simon Horman
  • Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.16, Arnd Bergmann
• [GIT PULL] Renesas ARM Based SoC Updates for v4.16, Simon Horman
  • [PATCH 1/1] soc: renesas: Identify R-Car M3-W ES1.1, Simon Horman
  • Re: [GIT PULL] Renesas ARM Based SoC Updates for v4.16, Arnd Bergmann
• [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.16, Simon Horman
  • [PATCH 1/2] ARM: shmobile: Document Renesas M3-W-based Salvator-XS board DT bindings, Simon Horman
  • [PATCH 2/2] arm64: renesas: document V3MSK board bindings, Simon Horman
  • Re: [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.16, Arnd Bergmann
• [PATCH 0/3] usb: renesas_usbhs: modify fifo/pipe buffer clear handling, Yoshihiro Shimoda
  • [PATCH 2/3] usb: renesas_usbhs: add usbhs_pipe_clear_without_sequence() function, Yoshihiro Shimoda
  • [PATCH 1/3] usb: renesas_usbhs: remove redundant polling in usbhsf_fifo_barrier(), Yoshihiro Shimoda
  • [PATCH 3/3] usb: renesas_usbhs: use PIPEnCLR.ACLRM instead of {C,Dn}FIFOCTR.BCLR in usbhs_pkt_pop(), Yoshihiro Shimoda
• [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Kuninori Morimoto
  • Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Laurent Pinchart
    • Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Kuninori Morimoto
      • Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Laurent Pinchart
        • Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Geert Uytterhoeven
          • Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter, Kuninori Morimoto
• [PATCH] clk: renesas: r8a77970: add LVDS clock, Sergei Shtylyov
  • Re: [PATCH] clk: renesas: r8a77970: add LVDS clock, Geert Uytterhoeven
• [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep, Jacopo Mondi
  • Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep, Hans Verkuil
    • Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep, Niklas Söderlund
      • Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep, Laurent Pinchart
        • Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep, Niklas Söderlund
• NFS crash, hashed pointers in backtrace, Geert Uytterhoeven
  • Re: NFS crash, hashed pointers in backtrace, Linus Torvalds
  • Re: NFS crash, hashed pointers in backtrace, Geert Uytterhoeven
    • Re: NFS crash, hashed pointers in backtrace, Trond Myklebust
      • Re: NFS crash, hashed pointers in backtrace, Geert Uytterhoeven
        • Re: NFS crash, hashed pointers in backtrace, Geert Uytterhoeven
• [PATCH/RFT 0/3] mmc: renesas_sdhi: Add eMMC HS400 mode support, Simon Horman
  • [PATCH/RFT 3/3] arm64: dts: salvator-common: Enable HS400 of SDHI2, Simon Horman
  • [PATCH/RFT 1/3] mmc: tmio: Add eMMC HS400 mode support, Simon Horman
  • [PATCH/RFT 2/3] mmc: renesas_sdhi: Add eMMC HS400 mode support, Simon Horman
• [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available, Thomas Petazzoni
  • Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available, Andrew Lunn
  • Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available, Sergei Shtylyov
    • Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available, Thomas Petazzoni
• [GIT PULL FOR v4.16] R-Car DU changes, Laurent Pinchart
• [PATCH 0/2] net: sh_eth: add support for SH7786 and big-endian, Thomas Petazzoni
  • [PATCH 2/2] net: sh_eth: make work on big endian systems, Thomas Petazzoni
    • Re: [PATCH 2/2] net: sh_eth: make work on big endian systems, Sergei Shtylyov
  • [PATCH 1/2] net: sh_eth: add support for SH7786, Thomas Petazzoni
    • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Thomas Petazzoni
        • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
          • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
            • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, David Miller
            • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Thomas Petazzoni
              • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Geert Uytterhoeven
    • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: add support for SH7786, Sergei Shtylyov
  • Re: [PATCH 0/2] net: sh_eth: add support for SH7786 and big-endian, David Miller
• [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available, Thomas Petazzoni
  • Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available, Andrew Lunn
  • Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available, Sergei Shtylyov
  • Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available, Sergei Shtylyov
    • Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available, Andrew Lunn
• [PATCH 0/2] net: sh_eth: DMA mapping API fixes, Thomas Petazzoni
  • [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Thomas Petazzoni
    • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Sergei Shtylyov
    • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Sergei Shtylyov
      • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Geert Uytterhoeven
        • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Thomas Petazzoni
          • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Geert Uytterhoeven
    • Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions, Geert Uytterhoeven
  • [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API, Thomas Petazzoni
    • Re: [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API, Sergei Shtylyov
    • Re: [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API, Geert Uytterhoeven
  • Re: [PATCH 0/2] net: sh_eth: DMA mapping API fixes, David Miller
• [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar, Wolfram Sang
  • [PATCH 1/6] i2c: make kerneldoc about bus recovery more precise, Wolfram Sang
  • [PATCH 2/6] i2c: add identifier in declarations for i2c_bus_recovery, Wolfram Sang
    • Re: [PATCH 2/6] i2c: add identifier in declarations for i2c_bus_recovery, Andy Shevchenko
      • Re: [PATCH 2/6] i2c: add identifier in declarations for i2c_bus_recovery, Wolfram Sang
  • [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
    • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Phil Reid
    • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Linus Walleij
      • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Phil Reid
        • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
        • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Linus Walleij
      • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
        • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Linus Walleij
          • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
            • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
              • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Linus Walleij
          • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Andy Shevchenko
      • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Wolfram Sang
    • Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info, Andy Shevchenko
  • [PATCH 4/6] i2c: ensure SDA is released in recovery if SDA is controllable, Wolfram Sang
  • [PATCH 5/6] i2c: send STOP after successful bus recovery, Wolfram Sang
  • [PATCH 6/6] i2c: rcar: implement bus recovery, Wolfram Sang
  • Re: [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar, Phil Reid
  • Re: [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar, Andrzej Hajda
    • Re: [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar, Wolfram Sang
• [PATCH] i2c: imx: use proper GPIO directions for recovery, Wolfram Sang
  • Re: [PATCH] i2c: imx: use proper GPIO directions for recovery, Phil Reid
  • Re: [PATCH] i2c: imx: use proper GPIO directions for recovery, Wolfram Sang
• [renesas-drivers:topic/phy-reset-v4 1/4] include/linux/err.h:31:9: warning: 'gpiod' may be used uninitialized in this function, kbuild test robot
  • Re: [renesas-drivers:topic/phy-reset-v4 1/4] include/linux/err.h:31:9: warning: 'gpiod' may be used uninitialized in this function, Geert Uytterhoeven
• [PATCH v3] media: vsp1: Prevent suspending and resuming DRM pipelines, Kieran Bingham
• [PATCH v4 0/4] Teach phylib hard-resetting devices, Geert Uytterhoeven
  • [PATCH v4 3/4] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset, Geert Uytterhoeven
  • [PATCH v4 2/4] macb: Kill PHY reset code, Geert Uytterhoeven
  • [PATCH v4 4/4] arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset, Geert Uytterhoeven
  • [PATCH v4 1/4] phylib: Add device reset GPIO support, Geert Uytterhoeven
    • [PATCH v4.1] phylib: Add device reset GPIO support, Geert Uytterhoeven
      • Re: [PATCH v4.1] phylib: Add device reset GPIO support, Richard Leitner
      • Re: [PATCH v4.1] phylib: Add device reset GPIO support, Sergei Shtylyov
        • Re: [PATCH v4.1] phylib: Add device reset GPIO support, Sergei Shtylyov
        • Re: [PATCH v4.1] phylib: Add device reset GPIO support, Geert Uytterhoeven
          • Re: [PATCH v4.1] phylib: Add device reset GPIO support, Sergei Shtylyov
  • Re: [PATCH v4 0/4] Teach phylib hard-resetting devices, David Miller
  • Re: [PATCH v4 0/4] Teach phylib hard-resetting devices, Simon Horman
• [PATCH] i2c: algo-bit: init the bus to a known state, Wolfram Sang
  • Re: i2c: algo-bit: init the bus to a known state, Wolfram Sang
• [PATCH 0/9] R-Car DU: Support CRC calculation, Laurent Pinchart
  • [PATCH 2/9] v4l: vsp1: Print the correct blending unit name in debug messages, Laurent Pinchart
    • Re: [PATCH 2/9] v4l: vsp1: Print the correct blending unit name in debug messages, Kieran Bingham
  • [PATCH 1/9] v4l: vsp1: Fix display stalls when requesting too many inputs, Laurent Pinchart
    • Re: [PATCH 1/9] v4l: vsp1: Fix display stalls when requesting too many inputs, Kieran Bingham
  • [PATCH 5/9] v4l: vsp1: Document the vsp1_du_atomic_config structure, Laurent Pinchart
    • Re: [PATCH 5/9] v4l: vsp1: Document the vsp1_du_atomic_config structure, Sergei Shtylyov
      • Re: [PATCH 5/9] v4l: vsp1: Document the vsp1_du_atomic_config structure, Laurent Pinchart
  • [PATCH 4/9] v4l: vsp1: Reset the crop and compose rectangles in the set_fmt helper, Laurent Pinchart
  • [PATCH 3/9] v4l: vsp1: Share the CLU, LIF and LUT set_fmt pad operation code, Laurent Pinchart
  • [PATCH 8/9] v4l: vsp1: Integrate DISCOM in display pipeline, Laurent Pinchart
  • [PATCH 7/9] v4l: vsp1: Add support for the DISCOM entity, Laurent Pinchart
  • [PATCH 6/9] v4l: vsp1: Extend the DU API to support CRC computation, Laurent Pinchart
  • [PATCH 9/9] drm: rcar-du: Add support for CRC computation, Laurent Pinchart
• [PATCH 0/2] kms-tests: Add CRC test, Laurent Pinchart
  • [PATCH 2/2] tests: crc: Add CRC computation test, Laurent Pinchart
  • [PATCH 1/2] kmstest.py: Add CRC reader class, Laurent Pinchart
• Possible regression due to "arm64: renesas: salvator: set driver type for eMMC", Simon Horman
  • Re: Possible regression due to "arm64: renesas: salvator: set driver type for eMMC", Wolfram Sang
    • Re: Possible regression due to "arm64: renesas: salvator: set driver type for eMMC", Geert Uytterhoeven
• [PATCH] rcar-vin: Fix rvin_group_init, Kieran Bingham
  • Re: [PATCH] rcar-vin: Fix rvin_group_init, Niklas Söderlund
• [PATCH] mmc: core: properly init drv_type, Wolfram Sang
  • Re: [PATCH] mmc: core: properly init drv_type, Geert Uytterhoeven
    • Re: [PATCH] mmc: core: properly init drv_type, Wolfram Sang
      • Re: [PATCH] mmc: core: properly init drv_type, Simon Horman
  • Re: [PATCH] mmc: core: properly init drv_type, Ulf Hansson
• [PATCH 0/5] tty: serial: sh-sci: Hide driver specific config questions, Geert Uytterhoeven
  • [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Geert Uytterhoeven
    • Re: [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Rich Felker
      • Re: [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Geert Uytterhoeven
        • Re: [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Rich Felker
          • Re: [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Rob Herring
            • Re: [PATCH 3/5] tty: serial: sh-sci: Hide earlycon config question, Geert Uytterhoeven
  • [PATCH 4/5] tty: serial: sh-sci: Hide DMA config question, Geert Uytterhoeven
  • [PATCH 2/5] tty: serial: sh-sci: Hide serial console config question, Geert Uytterhoeven
  • [PATCH 1/5] tty: serial: sh-sci: Hide number of ports config question, Geert Uytterhoeven
  • [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Geert Uytterhoeven
    • Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Simon Horman
      • Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Geert Uytterhoeven
        • Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Simon Horman
          • Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Rob Landley
            • Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED, Geert Uytterhoeven
• [PATCH v2 0/4] ARM: dts: renesas: Convert to named i2c-gpio bindings, Geert Uytterhoeven
  • [PATCH v2 4/4] ARM: dts: alt: Convert to named i2c-gpio bindings, Geert Uytterhoeven
    • Re: [PATCH v2 4/4] ARM: dts: alt: Convert to named i2c-gpio bindings, Linus Walleij
  • [PATCH v2 3/4] ARM: dts: koelsch: Convert to named i2c-gpio bindings, Geert Uytterhoeven
    • Re: [PATCH v2 3/4] ARM: dts: koelsch: Convert to named i2c-gpio bindings, Linus Walleij
  • [PATCH v2 1/4] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings, Geert Uytterhoeven
    • Re: [PATCH v2 1/4] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings, Linus Walleij
  • [PATCH v2 2/4] ARM: dts: lager: Convert to named i2c-gpio bindings, Geert Uytterhoeven
    • Re: [PATCH v2 2/4] ARM: dts: lager: Convert to named i2c-gpio bindings, Linus Walleij
  • Re: [PATCH v2 0/4] ARM: dts: renesas: Convert to named i2c-gpio bindings, Simon Horman
    • Re: [PATCH v2 0/4] ARM: dts: renesas: Convert to named i2c-gpio bindings, Wolfram Sang
      • Re: [PATCH v2 0/4] ARM: dts: renesas: Convert to named i2c-gpio bindings, Simon Horman
• [PATCH] bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate, Geert Uytterhoeven
  • Re: [PATCH] bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate, Simon Horman
    • Re: [PATCH] bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate, Rafael J. Wysocki
• [PATCH v4] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus, Simon Horman
  • Re: [PATCH v4] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus, Simon Horman
• Re: [PATCH/RFT renesas-devel] arm64: dts: ulcb: Enable NFS root, Simon Horman
  • Re: [PATCH/RFT renesas-devel] arm64: dts: ulcb: Enable NFS root, Niklas Söderlund
    • Re: [PATCH/RFT renesas-devel] arm64: dts: ulcb: Enable NFS root, Geert Uytterhoeven
      • Re: [PATCH/RFT renesas-devel] arm64: dts: ulcb: Enable NFS root, Sergei Shtylyov
• [PATCH v8 00/28] rcar-vin: Add Gen3 with media controller, Niklas Söderlund
  • [PATCH v8 06/28] rcar-vin: move max width and height information to chip information, Niklas Söderlund
  • [PATCH v8 01/28] rcar-vin: add Gen3 devicetree bindings documentation, Niklas Söderlund
  • [PATCH v8 28/28] rcar-vin: enable support for r8a77970, Niklas Söderlund
    • Re: [PATCH v8 28/28] rcar-vin: enable support for r8a77970, Kieran Bingham
    • Re: [PATCH v8 28/28] rcar-vin: enable support for r8a77970, Rob Herring
    • Re: [PATCH v8 28/28] rcar-vin: enable support for r8a77970, Hans Verkuil
  • [PATCH v8 26/28] rcar-vin: enable support for r8a7795, Niklas Söderlund
  • [PATCH v8 27/28] rcar-vin: enable support for r8a7796, Niklas Söderlund
    • Re: [PATCH v8 27/28] rcar-vin: enable support for r8a7796, Rob Herring
  • [PATCH v8 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller, Niklas Söderlund
  • [PATCH v8 24/28] rcar-vin: add link notify for Gen3, Niklas Söderlund
  • [PATCH v8 20/28] rcar-vin: prepare for media controller mode initialization, Niklas Söderlund
  • [PATCH v8 23/28] rcar-vin: parse Gen3 OF and setup media graph, Niklas Söderlund
    • Re: [PATCH v8 23/28] rcar-vin: parse Gen3 OF and setup media graph, Niklas Söderlund
    • Re: [PATCH v8 23/28] rcar-vin: parse Gen3 OF and setup media graph, Hans Verkuil
  • [PATCH v8 22/28] rcar-vin: add chsel information to rvin_info, Niklas Söderlund
  • [PATCH v8 19/28] rcar-vin: use different v4l2 operations in media controller mode, Niklas Söderlund
  • [PATCH v8 08/28] rcar-vin: move functions regarding scaling, Niklas Söderlund
  • [PATCH v8 21/28] rcar-vin: add group allocator functions, Niklas Söderlund
  • [PATCH v8 09/28] rcar-vin: all Gen2 boards can scale simplify logic, Niklas Söderlund
  • [PATCH v8 17/28] rcar-vin: add flag to switch to media controller mode, Niklas Söderlund
  • [PATCH v8 18/28] rcar-vin: break out format alignment and checking, Niklas Söderlund
  • [PATCH v8 05/28] rcar-vin: move chip information to own struct, Niklas Söderlund
  • [PATCH v8 15/28] rcar-vin: enable Gen3 hardware configuration, Niklas Söderlund
  • [PATCH v8 14/28] rcar-vin: move media bus configuration to struct rvin_info, Niklas Söderlund
  • [PATCH v8 16/28] rcar-vin: add function to manipulate Gen3 chsel value, Niklas Söderlund
  • [PATCH v8 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields), Niklas Söderlund
  • [PATCH v8 07/28] rcar-vin: change name of video device, Niklas Söderlund
  • [PATCH v8 12/28] rcar-vin: read subdevice format for crop only when needed, Niklas Söderlund
  • [PATCH v8 11/28] rcar-vin: do not allow changing scaling and composing while streaming, Niklas Söderlund
  • [PATCH v8 10/28] rcar-vin: do not reset crop and compose when setting format, Niklas Söderlund
  • [PATCH v8 04/28] rcar-vin: move subdevice handling to async callbacks, Niklas Söderlund
    • Re: [PATCH v8 04/28] rcar-vin: move subdevice handling to async callbacks, Hans Verkuil
  • [PATCH v8 03/28] rcar-vin: unregister video device on driver removal, Niklas Söderlund
    • Re: [PATCH v8 03/28] rcar-vin: unregister video device on driver removal, Kieran Bingham
    • Re: [PATCH v8 03/28] rcar-vin: unregister video device on driver removal, Hans Verkuil
  • [PATCH v8 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Niklas Söderlund
    • Re: [PATCH v8 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Kieran Bingham
    • Re: [PATCH v8 02/28] rcar-vin: rename poorly named initialize and cleanup functions, Hans Verkuil
• [PATCH v12 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2, Niklas Söderlund
  • [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation, Niklas Söderlund
    • Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation, Sakari Ailus
    • Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation, Laurent Pinchart
      • Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation, Niklas Söderlund
        • Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation, Niklas Söderlund