Re: [PATCH 0/5] arm64: dts: renesas: r8a77970: enable HDMI output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/31/2018 7:18 PM, Niklas Söderlund wrote:

From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Hi,

This series enables the HDMI out put on V3M. It is based on top of the
latest renesas-drivers release and depends on patches from both Laurent
and Sergei.

- [PATCH v2 00/12] R-Car DU: Convert LVDS code to bridge driver
- [PATCH v2 0/2] Add R-Car V3M (R8A77970) support to the DU driver
- [PATCH 0/3] Add R-Car V3M (R8A77970) support to the R-Car LVDS driver

It is tested on V3M by connecting the HDMI output to a monitor and
booting the board. To console shall eventually show up on the screen.

Niklas Söderlund (5):
   arm64: dts: renesas: r8a77970: add FCPVD node
   arm64: dts: renesas: r8a77970: Add VSPD instance
   arm64: dts: renesas: r8a77970: add DU instance
   arm64: dts: renesas: r8a77970: add the LVDS instance

   I have already posted such series, hadn't you seen it?

   arm64: dts: renesas: eagle: add HDMI output using the ADV7511W

Not posted this patch, however -- I was only doing it for the V3M Starter Kit board.

  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 66 +++++++++++++++++++++++
  arch/arm64/boot/dts/renesas/r8a77970.dtsi      | 72 ++++++++++++++++++++++++++
  2 files changed, 138 insertions(+)

MBR, Sergei



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux