Re: [PATCH v7 07/11] media: i2c: ov772x: Support frame interval handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thank you for the patch.

On Friday, 26 January 2018 15:55:26 EET Jacopo Mondi wrote:
> Add support to ov772x driver for frame intervals handling and enumeration.
> Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for
> 10, 15 and 30 frame per second rates.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
> drivers/media/i2c/ov772x.c | 315 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 310 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 912b1b9..6d46748 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -250,6 +250,7 @@
>  #define AEC_1p2         0x10	/*  01: 1/2  window */
>  #define AEC_1p4         0x20	/*  10: 1/4  window */
>  #define AEC_2p3         0x30	/*  11: Low 2/3 window */
> +#define COM4_RESERVED   0x01	/* Reserved value */

I'd write "Reserved bits", "Reserved value" makes it sound like it's the value 
of the full register.

>  /* COM5 */
>  #define AFR_ON_OFF      0x80	/* Auto frame rate control ON/OFF selection 
*/
> @@ -267,6 +268,19 @@
>  				/* AEC max step control */
>  #define AEC_NO_LIMIT    0x01	/*   0 : AEC incease step has limit */
>  				/*   1 : No limit to AEC increase step */
> +/* CLKRC */
> +				/* Input clock divider register */
> +#define CLKRC_RESERVED  0x80	/* Reserved value */
> +#define CLKRC_BYPASS    0x40	/* Bypass input clock divider */
> +#define CLKRC_DIV2      0x01	/* Divide input clock by 2 */
> +#define CLKRC_DIV3      0x02	/* Divide input clock by 3 */
> +#define CLKRC_DIV4      0x03	/* Divide input clock by 4 */
> +#define CLKRC_DIV5      0x04	/* Divide input clock by 5 */
> +#define CLKRC_DIV6      0x05	/* Divide input clock by 6 */
> +#define CLKRC_DIV8      0x07	/* Divide input clock by 8 */
> +#define CLKRC_DIV10     0x09	/* Divide input clock by 10 */
> +#define CLKRC_DIV16     0x0f	/* Divide input clock by 16 */
> +#define CLKRC_DIV20     0x13	/* Divide input clock by 20 */

How about just

#define CLKRC_DIV(n)		((n) - 1)

>  /* COM7 */
>  				/* SCCB Register Reset */
> @@ -373,6 +387,12 @@
>  #define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
> 
>  /*
> + * Input clock frequencies
> + */
> +enum { OV772X_FIN_10MHz, OV772X_FIN_24MHz, OV772X_FIN_48MHz, OV772X_FIN_N,
> };
> +static unsigned int ov772x_fin_vals[] = { 10000000, 24000000, 48000000
> };
> +
> +/*
>   * struct
>   */
> 
> @@ -391,6 +411,16 @@ struct ov772x_win_size {
>  	struct v4l2_rect	  rect;
>  };
> 
> +struct ov772x_pclk_config {
> +	u8 com4;
> +	u8 clkrc;
> +};
> +
> +struct ov772x_frame_rate {
> +	unsigned int fps;
> +	const struct ov772x_pclk_config pclk[OV772X_FIN_N];
> +};
> +
>  struct ov772x_priv {
>  	struct v4l2_subdev                subdev;
>  	struct v4l2_ctrl_handler	  hdl;
> @@ -404,6 +434,7 @@ struct ov772x_priv {
>  	unsigned short                    flag_hflip:1;
>  	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
>  	unsigned short                    band_filter;
> +	unsigned int			  fps;
>  };
> 
>  /*
> @@ -508,6 +539,154 @@ static const struct ov772x_win_size ov772x_win_sizes[]
> = { };
> 
>  /*
> + * frame rate settings lists
> + */
> +unsigned int ov772x_frame_intervals[] = {10, 15, 30, 60};
> +#define OV772X_N_FRAME_INTERVALS ARRAY_SIZE(ov772x_frame_intervals)
> +
> +static const struct ov772x_frame_rate vga_frame_rates[] = {
> +	{	/* PCLK = 7,5 MHz */
> +		.fps		= 10,
> +		.pclk = {
> +			[OV772X_FIN_10MHz] = {
> +				.com4	= PLL_6x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV8 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz] = {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV3 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz] = {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV6 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 12 MHz */
> +		.fps		= 15,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_4x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV3 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV4 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 24 MHz */
> +		.fps		= 30,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_8x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV3 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_BYPASS | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 48 MHz */
> +		.fps		= 60,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_8x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_4x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_BYPASS | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +};
> +
> +static const struct ov772x_frame_rate qvga_frame_rates[] = {
> +	{	/* PCLK = 3,2 MHz */
> +		.fps		= 10,
> +		.pclk = {
> +			[OV772X_FIN_10MHz] = {
> +				.com4	= PLL_6x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV16 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz] = {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV8 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz] = {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV16 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 4,8 MHz */
> +		.fps		= 15,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV5 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV10 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 9,6 MHz */
> +		.fps		= 30,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_BYPASS | COM4_RESERVED,
> +				.clkrc	= CLKRC_BYPASS | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_4x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV10 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_4x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV20 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +	{	/* PCLK = 19 MHz */
> +		.fps		= 60,
> +		.pclk = {
> +			[OV772X_FIN_10MHz]	= {
> +				.com4	= PLL_4x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV2 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_24MHz]	= {
> +				.com4	= PLL_6x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV8 | CLKRC_RESERVED,
> +			},
> +			[OV772X_FIN_48MHz]	= {
> +				.com4	= PLL_6x | COM4_RESERVED,
> +				.clkrc	= CLKRC_DIV16 | CLKRC_RESERVED,
> +			},
> +		},
> +	},
> +};
> +
> +/*
>   * general function
>   */

I'm afraid I'll have to ask the obvious: could we replace this table with 
dynamic computation ? You might be able to reuse the (probably badly named) 
aptina-pll library from drivers/media/i2c/

> @@ -574,6 +753,102 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int
> enable) return 0;
>  }
> 
> +/*
> + * Approximate input clock frequency to the closes possible one used to
> + * calculate pixel clock settings.
> + */
> +static int ov772x_get_fin(struct ov772x_priv *priv)
> +{
> +	unsigned int clk_rate = clk_get_rate(priv->clk);
> +	unsigned int rate_prev = ~0L;
> +	unsigned int rate;
> +	unsigned int idx;
> +	unsigned int i;
> +
> +	for (i = 0, idx = 0; i < OV772X_FIN_N; i++) {
> +		rate = abs(ov772x_fin_vals[i] - clk_rate);
> +		if (rate < rate_prev) {
> +			rate_prev = rate;
> +			idx = i;
> +		}
> +	}
> +
> +	return idx;
> +}
> +
> +static int ov772x_set_frame_rate(struct ov772x_priv *priv,
> +				 struct v4l2_fract *tpf, unsigned int fin,
> +				 const struct ov772x_win_size *win)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
> +	unsigned int fps = tpf->denominator / tpf->numerator;
> +	const struct ov772x_frame_rate *frate;
> +	const struct ov772x_pclk_config *pclk;
> +	unsigned int rate_prev = ~0L;
> +	unsigned int rate;
> +	unsigned int idx;
> +	unsigned int i;
> +	int ret;
> +
> +	if (win->rect.width == VGA_WIDTH &&
> +	    win->rect.height == VGA_HEIGHT)
> +		frate = vga_frame_rates;
> +	else if (win->rect.width == QVGA_WIDTH &&
> +		 win->rect.height == QVGA_HEIGHT)
> +		frate = qvga_frame_rates;
> +	else
> +		return -EINVAL;
> +
> +	/* Approximate to the closest possible frame interval. */
> +	for (i = 0, idx = 0; i < OV772X_N_FRAME_INTERVALS; i++) {
> +		rate = abs(fps - frate[i].fps);
> +		if (rate < rate_prev) {
> +			idx = i;
> +			rate_prev = rate;
> +		}
> +	}
> +
> +	pclk = &frate[idx].pclk[fin];
> +
> +	ret = ov772x_write(client, COM4, pclk->com4);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = ov772x_write(client, CLKRC, pclk->clkrc);
> +	if (ret < 0)
> +		return ret;
> +
> +	tpf->numerator = 1;
> +	tpf->denominator = frate[idx].fps;
> +	priv->fps = tpf->denominator;
> +
> +	return 0;
> +}
> +
> +static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_frame_interval *ival)
> +{
> +	struct ov772x_priv *priv = to_ov772x(sd);
> +	struct v4l2_fract *tpf = &ival->interval;
> +
> +	memset(ival->reserved, 0, sizeof(ival->reserved));
> +	tpf->numerator = 1;
> +	tpf->denominator = priv->fps;
> +
> +	return 0;
> +}
> +
> +static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_frame_interval *ival)
> +{
> +	struct ov772x_priv *priv = to_ov772x(sd);
> +	struct v4l2_fract *tpf = &ival->interval;
> +
> +	memset(ival->reserved, 0, sizeof(ival->reserved));
> +
> +	return ov772x_set_frame_rate(priv, tpf,
> +				     ov772x_get_fin(priv), priv->win);
> +}
>  static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
>  	struct ov772x_priv *priv = container_of(ctrl->handler,
> @@ -757,6 +1032,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
>  			     const struct ov772x_win_size *win)
>  {
>  	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
> +	struct v4l2_fract tpf;
>  	int ret;
>  	u8  val;
> 
> @@ -885,6 +1161,13 @@ static int ov772x_set_params(struct ov772x_priv *priv,
> if (ret < 0)
>  		goto ov772x_set_fmt_error;
> 
> +	/* COM4, CLKRC: Set pixel clock and framerate. */
> +	tpf.numerator = 1;
> +	tpf.denominator = priv->fps;
> +	ret = ov772x_set_frame_rate(priv, &tpf, ov772x_get_fin(priv), win);
> +	if (ret < 0)
> +		goto ov772x_set_fmt_error;
> +
>  	/*
>  	 * set COM8
>  	 */
> @@ -1040,6 +1323,24 @@ static const struct v4l2_subdev_core_ops
> ov772x_subdev_core_ops = { .s_power	= ov772x_s_power,
>  };
> 
> +static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
> +				      struct v4l2_subdev_pad_config *cfg,
> +				      struct v4l2_subdev_frame_interval_enum *fie)
> +{
> +	if (fie->pad || fie->index >= OV772X_N_FRAME_INTERVALS)
> +		return -EINVAL;
> +
> +	if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
> +		return -EINVAL;
> +	if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
> +		return -EINVAL;
> +
> +	fie->interval.numerator = 1;
> +	fie->interval.denominator = ov772x_frame_intervals[fie->index];
> +
> +	return 0;
> +}
> +
>  static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
>  		struct v4l2_subdev_pad_config *cfg,
>  		struct v4l2_subdev_mbus_code_enum *code)
> @@ -1052,14 +1353,17 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev
> *sd, }
> 
>  static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
> -	.s_stream	= ov772x_s_stream,
> +	.s_stream		= ov772x_s_stream,
> +	.s_frame_interval	= ov772x_s_frame_interval,
> +	.g_frame_interval	= ov772x_g_frame_interval,
>  };
> 
>  static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
> -	.enum_mbus_code = ov772x_enum_mbus_code,
> -	.get_selection	= ov772x_get_selection,
> -	.get_fmt	= ov772x_get_fmt,
> -	.set_fmt	= ov772x_set_fmt,
> +	.enum_frame_interval	= ov772x_enum_frame_interval,
> +	.enum_mbus_code		= ov772x_enum_mbus_code,
> +	.get_selection		= ov772x_get_selection,
> +	.get_fmt		= ov772x_get_fmt,
> +	.set_fmt		= ov772x_set_fmt,
>  };
> 
>  static const struct v4l2_subdev_ops ov772x_subdev_ops = {
> @@ -1131,6 +1435,7 @@ static int ov772x_probe(struct i2c_client *client,
> 
>  	priv->cfmt = &ov772x_cfmts[0];
>  	priv->win = &ov772x_win_sizes[0];
> +	priv->fps = 15;
> 
>  	ret = v4l2_async_register_subdev(&priv->subdev);
>  	if (ret)

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux