On Mon, Jan 29, 2018 at 04:45:43PM +0100, Ulrich Hecht wrote: > Hi! > > This adds I2C controllers to the D3 device tree and enables I2C busses 0 > and 1 on the Draak board. (I2C2 is not connected on that board.) > > This revision addresses Geert's review comments and adds Reviewed-Bys. > See below for details. > > CU > Uli > > > Changes since v1: > - pinctrl: patch dropped, has been picked up > - i2c-rcar: patch dropped, redundant > - dtsi: added dmac2 for i2c0-2 > - dtsi: fixed internal SCL delays > - dts: fixed EEPROM compatible string > - bindings: added Rohm EEPROM > - bindings: fixed typo in i2c-rcar bindings > > > Ulrich Hecht (5): > arm64: renesas: r8a77995: add I2C support > arm64: renesas: draak: enable I2C controller 0 and EEPROM > arm64: renesas: draak: enable I2C controller 1 Thanks, I have applied the arm64 patches after updating their prefix to "arm64: dts: renesas:". > i2c: rcar: document R8A77995 bindings > dt-bindings: at24: add bindings for Rohm BR24T01 > > Documentation/devicetree/bindings/eeprom/at24.txt | 2 + > Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 + > arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 28 +++++++++ > arch/arm64/boot/dts/renesas/r8a77995.dtsi | 67 ++++++++++++++++++++++ > 4 files changed, 98 insertions(+) > > -- > 2.7.4 >
