Re: [PATCH 2/2] drm: adv7511: Add support for i2c_new_secondary_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 29, 2018 at 12:26:00PM +0200, Laurent Pinchart wrote:
> Hi Kieran,
> 
> Thank you for the patch.
> 
> On Monday, 22 January 2018 14:50:00 EET Kieran Bingham wrote:
> > The ADV7511 has four 256-byte maps that can be accessed via the main I²C
> > ports. Each map has it own I²C address and acts as a standard slave
> > device on the I²C bus.
> > 
> > Allow a device tree node to override the default addresses so that
> > address conflicts with other devices on the same bus may be resolved at
> > the board description level.
> > 
> > Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> > ---
> >  .../bindings/display/bridge/adi,adv7511.txt        | 10 +++++-
> 
> I don't mind personally, but device tree maintainers usually ask for DT 
> bindings changes to be split to a separate patch.

Or perfect bindings, then I won't ask to split it just for that 
(usually).

> >  drivers/gpu/drm/bridge/adv7511/adv7511.h           |  4 +++
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c       | 36 ++++++++++++-------
> >  3 files changed, 37 insertions(+), 13 deletions(-)



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux