Linux Media

• Thread Index

• [GIT PULL FOR v5.18] Miscellaneous changes to the i.MX7 CSI-2 receiver driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/16] Remove usage of the deprecated "pci-dma-compat.h" API
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 8/8] media: camss: Point sm8250 at the correct vdda regulators
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 7/8] media: camss: Point sdm845 at the correct vdda regulators
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 6/8] media: camss: Set unused regulators to the empty set
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 5/8] media: camss: Add regulator_bulk support
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [GIT PULL for v5.17-rc1] New year's media updates
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH v2 4/8] arm64: dts: qcom: sdm845: Add camss vdda-pll-supply
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: media: hynix,hi846: add link-frequencies description
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-binding: media: hynix,hi846: use $defs/port-base port description
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• Re: [PATCH platform-next] media/platform: remove redundant bpp variable
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH v1 2/2] dt-bindings: media: hynix,hi846: add link-frequencies description
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v1 1/2] dt-binding: media: hynix,hi846: use $defs/port-base port description
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2 3/8] arm64: dts: qcom: sdm845: Rename camss vdda-supply to vdda-phy-supply
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 2/8] media: dt-bindings: media: camss: Add vdda supply declarations sm8250
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 1/8] media: dt-bindings: media: camss: Fixup vdda regulator descriptions sdm845
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iommu/mediatek: Always tlb_flush_all when each PM resume
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] iommu/mediatek: Add tlb_lock in tlb_flush_all
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] iommu/mediatek: Remove the power status checking in tlb flush all
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] iommu/mediatek: Always check runtime PM status in tlb flush range callback
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iommu/mediatek: Remove for_each_m4u in tlb_sync_all
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] media: ov5675: use group write to update digital gain
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] media: stm32: dcmi: create a dma scatterlist based on DMA max_sg_burst value
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] staging: media: imx7-mipi-csis: Small improvements
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH 04/16] media: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH v4, 14/15] media: mtk-vcodec: support stateless VP8 decoding
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 15/15] media: mtk-vcodec: support stateless VP9 decoding
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 12/15] media: mtk-vcodec: Extract H264 common code
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 13/15] media: mtk-vcodec: support stateless H.264 decoding for mt8192
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 11/15] media: mtk-vcodec: record capture queue format type
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 09/15] media: mtk-vcodec: disable vp8 4K capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 10/15] media: mtk-vcodec: Fix v4l2-compliance fail
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 08/15] media: mtk-vcodec: Add format to support MT21C
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 06/15] media: mtk-vcodec: Refactor get and put capture buffer flow
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 07/15] media: mtk-vcodec: Refactor supported vdec formats and framesizes
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 05/15] media: mtk-vcodec: Call v4l2_m2m_set_dst_buffered() set capture buffer buffered
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 02/15] media: mtk-vcodec: Using firmware type to separate different firmware architecture
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 04/15] media: mtk-vcodec: Read max resolution from dec_capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 03/15] media: mtk-vcodec: get capture queue buffer size from scp
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 00/15] media: mtk-vcodec: support for MT8192 decoder
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4, 01/15] media: mtk-vcodec: Add vdec enable/disable hardware helpers
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v10 15/38] media: entity: Add media_entity_has_route() function
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• cron job: media_tree daily build: WARNINGS
  • From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
• Re: [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH][next] media: v4l2-ctrls: make array range static
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH] media: media/radio: make array probe_ports static const
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH] media: gspca: make array regs_to_read static const
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH] media: atomisp: make array idx_map static const
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v7 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] media: i2c: rdacm20: Fix indentation in comment
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v7 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 01/11] dt-bindings: media: i2c: max9286: Add support for per-port supplies
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 03/11] dt-bindings: media: i2c: max9286: Add property to select bus width
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 12/11] media: i2c: max9286: Print power-up GMSL link configuration
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 11/11] media: i2c: max9286: Select HS as data enable signal
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 06/11] media: i2c: max9286: Rename MAX9286_DATATYPE_RAW11 to RAW12
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 05/11] media: i2c: max9286: Support manual framesync operation
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Jenkins build is back to normal : media-build #3764
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• cron job: media_tree daily build: ERRORS
  • From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
• [PATCH v2 8/8] media: camss: Point sm8250 at the correct vdda regulators
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 7/8] media: camss: Point sdm845 at the correct vdda regulators
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 6/8] media: camss: Set unused regulators to the empty set
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 5/8] media: camss: Add regulator_bulk support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 4/8] arm64: dts: qcom: sdm845: Add camss vdda-pll-supply
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/8] media: dt-bindings: media: camss: Add vdda supply declarations sm8250
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 3/8] arm64: dts: qcom: sdm845: Rename camss vdda-supply to vdda-phy-supply
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 1/8] media: dt-bindings: media: camss: Fixup vdda regulator descriptions sdm845
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 0/8] camss: Fixup multiple VDDA regulator support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 12/38] media: entity: Move the pipeline from entity to pads
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 15/38] media: entity: Add media_entity_has_route() function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: DVB mmap API
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• DVB mmap API
  • From: Adam Stylinski <kungfujesus06@xxxxxxxxx>
• Re: [PATCH 5/7] media: camss: Add regulator_bulk support
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• [PATCH RESEND v2] media: uvcvideo: Fix memory leak in uvc_gpio_parse
  • From: José Expósito <jose.exposito89@xxxxxxxxx>
• Build failed in Jenkins: media-build #3763
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• drivers/media/i2c/ov5648.c:2035:39: warning: taking address of packed member 'handler' of class or structure 'ov5648_ctrls' may result in an unaligned pointer value
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Hridya Valsaraju <hridya@xxxxxxxxxx>
• Re: [PATCH v10 19/38] media: entity: Add only connected pads to the pipeline
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 12/38] media: entity: Move the pipeline from entity to pads
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] media: camss: Add regulator_bulk support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Hridya Valsaraju <hridya@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v4 1/2] media: hevc: Remove RPS named flags
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 2/2] media: hevc: Embedded indexes in RPS
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 1/2] media: hevc: Remove RPS named flags
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 0/2] media: HEVC: RPS clean up
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH 2/2] venus: venc: Add support for intra-refresh mode
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH 1/2] media: v4l2-ctrls: Add intra-refresh type control
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH 0/2] Intra-refresh type control
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v2 3/3] staging: media: imx: imx7-mipi-csis: Make subdev name unique
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] staging: media: imx: imx7_mipi_csis: Add timings override through debugfs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] staging: media: imx7-mipi-csis: Small improvements
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] staging: media: imx: imx7-mipi-csis: Dump MIPI_CSIS_FRAME_COUNTER_CH0 register
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] staging: media: imx: imx7-mipi-csis: Make subdev name unique
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v1 2/3] staging: media: imx: imx7_mipi_csis: Add timings override through debugfs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Aw: Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• Re: [PATCH v1 3/3] staging: media: imx: imx7-mipi-csis: Make subdev name unique
  • From: "Rui Miguel Silva" <rmfrfs@xxxxxxxxx>
• Re: [PATCH v1 2/3] staging: media: imx: imx7_mipi_csis: Add timings override through debugfs
  • From: "Rui Miguel Silva" <rmfrfs@xxxxxxxxx>
• Re: [PATCH v1 1/3] staging: media: imx: imx7-mipi-csis: Dump MIPI_CSIS_FRAME_COUNTER_CH0 register
  • From: "Rui Miguel Silva" <rmfrfs@xxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH RFT v2 8/8] media: hantro: jpeg: Remove open-coded size in quantization table code
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 7/8] media: hantro: output encoded JPEG content directly to capture buffers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 5/8] media: hantro: jpeg: Add COM segment to JPEG header to align image scan
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 6/8] media: hantro: Implement V4L2_CID_JPEG_ACTIVE_MARKER control
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 4/8] media: hantro: jpeg: Add JFIF APP0 segment to JPEG encoder output
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 3/8] media: hantro: Support cropping visible area for encoders
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 2/8] media: hantro: Fix overfill bottom register field name
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 1/8] media: hantro: jpeg: Relax register writes before write starting hardware
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT v2 0/8] media: hantro: jpeg: Various improvements
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3762
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH] media: coda: Fix missing put_device() call in coda_get_vdoa_data
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH 04/16] media: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 04/16] media: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 7/7] media: camss: Point sm8250 at the correct vdda regulators
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 6/7] media: camss: Point sdm845 at the correct vdda regulators
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 5/7] media: camss: Add regulator_bulk support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 4/7] arm64: dts: qcom: sdm845: Add camss vdda-pll-supply
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 3/7] arm64: dts: qcom: sdm845: Rename camss vdda-supply to vdda-phy-supply
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/7] media: dt-bindings: media: camss: Add vdda supply declarations sm8250
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/7] media: dt-bindings: media: camss: Fixup vdda regulator descriptions sdm845
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/7] camss: Fixup multiple VDDA regulator support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• [PATCH 3/3] media: si2157: add support for DVB-C Annex C
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• [PATCH 2/3] media: si2157: fix bandwidth stored in dev
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• [PATCH 1/3] media: si2157: fix 6MHz & 6.1MHz bandwidth setting
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• [PATCH 0/3] media: si2157: fix bandwidth set/get, add DVB-C Annex C
  • From: Robert Schlabbach <robert_s@xxxxxxx>
• [PATCH 04/16] media: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 00/16] Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] media: si6157: fix a tune regression for 6.1MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCH] media: si6157: fix a tune regression for 6.1MHz
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Hridya Valsaraju <hridya@xxxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Robert Schlabbach <Robert.Schlabbach@xxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v1 2/3] staging: media: imx: imx7_mipi_csis: Add timings override through debugfs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/3] staging: media: imx: imx7-mipi-csis: Make subdev name unique
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v1 0/3] staging: media: imx7-mipi-csis: Small improvements
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v1 1/3] staging: media: imx: imx7-mipi-csis: Dump MIPI_CSIS_FRAME_COUNTER_CH0 register
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drm: omapdrm: Fix implicit dma_buf fencing
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 0/1] media: ovm6211: Adds support for OVM6211
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v3 1/1] media: ovm6211: Adds support for OVM6211
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v3 0/1] media: ovm6211: Adds support for OVM6211
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] media: si2157: add support for 1.7MHz and 6.1 MHz
  • From: Robert Schlabbach <Robert.Schlabbach@xxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH] MAINTAINERS: Change maintainers for mipid02 driver
  • From: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drm: omapdrm: Fix implicit dma_buf fencing
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Build failed in Jenkins: linux-media #265
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [Openpvrsgx-devgroup] [PATCH] drm: omapdrm: Fix implicit dma_buf fencing
  • From: Merlijn Wajer <merlijn@xxxxxxxxxx>
• Re: [PATCH] media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probe
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v11 3/3] media: platform: mtk-mdp3: add Mediatek MDP3 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Marko Mäkelä <marko.makela@xxxxxx>
• Re: [Openpvrsgx-devgroup] [PATCH] drm: omapdrm: Fix implicit dma_buf fencing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Build failed in Jenkins: media-build #3761
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH] misc: fastrpc: Check for error num after setting mask
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] media: st-hva: Fix PM disable depth imbalance in hva_hw_probe
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v1.1 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC PATCH 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Hridya Valsaraju <hridya@xxxxxxxxxx>
• Re: [PATCH v11 3/3] media: platform: mtk-mdp3: add Mediatek MDP3 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] drm: omapdrm: Fix implicit dma_buf fencing
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] media: hevc: Embedded indexes in RPS
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] media: hevc: Remove RPS named flags
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] media: st-delta: Fix PM disable depth imbalance in delta_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• [PATCH] media: bdisp: Fix PM disable depth imbalance in bdisp_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• [PATCH] media: st-hva: Fix PM disable depth imbalance in hva_hw_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• [PATCH] media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v11 3/3] media: platform: mtk-mdp3: add Mediatek MDP3 driver
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 1/3] dt-binding: mt8183: add Mediatek MDP3 dt-bindings
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 0/3] media: mediatek: support mdp3 on mt8183 platform
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 2/3] dts: arm64: mt8183: add Mediatek MDP3 nodes
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3760
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH v2] dma-buf: dma-heap: Add a size check for allocation
  • From: <guangming.cao@xxxxxxxxxxxx>
• Re: [PATCH v3 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] dma-buf: Move sysfs work out of DMA-BUF export/release path
  • From: Hridya Valsaraju <hridya@xxxxxxxxxx>
• Re: [PATCH v3 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1] v4l2-utils: Fix incorrect use of fd in streaming_set_cap2out
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] media: davinci: vpif: drop probe printk
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 3/4] media: davinci: vpif: fix use-after-free on driver unbind
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 2/4] media: davinci: vpif: fix unbalanced runtime PM enable
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 1/4] media: davinci: vpif: fix unbalanced runtime PM get
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Maximilian Böhm <maximilian.boehm@xxxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Maximilian Böhm <maximilian.boehm@xxxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Marko Mäkelä <marko.makela@xxxxxx>
• Re: [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] media: hevc: Remove RPS named flags
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [RFC PATCH 1/5] adds ovm6211 driver to staging
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• Re: [PATCH v3 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 13/24] dma-buf: drop the DAG approach for the dma_resv object
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v3 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH v1] v4l2-utils: Fix incorrect use of fd in streaming_set_cap2out
  • From: Vedant Paranjape <vedantparanjape160201@xxxxxxxxx>
• v4l2-ctl --stream-out-dmabuf example not working
  • From: Vedant Paranjape <vedantparanjape160201@xxxxxxxxx>
• Re: [PATCH 5/5] drm/vc4: dpi: Support DPI interface in mode3 for RGB565
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3, 02/13] media: mtk-vcodec: Using firmware type to separate different firmware architecture
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3759
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH v11 2/4] soc: mediatek: mmsys: add support for ISP control
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 3/4] soc: mediatek: mutex: add support for MDP
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 1/4] soc: mediatek: mmsys: add CMDQ write register function
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v11 4/4] soc: mediatek: mutex: add functions that operate registers by CMDQ
  • From: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
• [PATCH v3, 10/13] media: mtk-vcodec: Fix v4l2-compliance fail
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 11/13] media: mtk-vcodec: record capture queue format type
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 12/13] media: mtk-vcodec: Extract H264 common code
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH 13/13] media: mtk-vcodec: Add h264 decoder driver for mt8192
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 08/13] media: mtk-vcodec: Add format to support MT21C
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 06/13] media: mtk-vcodec: Refactor get and put capture buffer flow
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 09/13] media: mtk-vcodec: disable vp8 4K capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 07/13] media: mtk-vcodec: Refactor supported vdec formats and framesizes
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 03/13] media: mtk-vcodec: get capture queue buffer size from scp
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 05/13] media: mtk-vcodec: Call v4l2_m2m_set_dst_buffered() set capture buffer buffered
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 04/13] media: mtk-vcodec: Read max resolution from dec_capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 02/13] media: mtk-vcodec: Using firmware type to separate different firmware architecture
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 01/13] media: mtk-vcodec: Add vdec enable/disable hardware helpers
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v3, 00/13] media: mtk-vcodec: support for MT8192 decoder
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• Re: [PATCH v2] dma-buf: dma-heap: Add a size check for allocation
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH] dma-buf: cma_heap: Fix mutex locking section
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH v4 2/2] media: hevc: Embedded indexes in RPS
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v4 1/2] media: hevc: Remove RPS named flags
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v4 0/2] media: HEVC: RPS clean up
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH] dma-buf: cma_heap: Fix mutex locking section
  • From: Weizhao Ouyang <o451686892@xxxxxxxxx>
• Re: [PATCH v5 03/14] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH RESEND] dma-buf: heaps: Fix mutex lock area and generalize struct dma_heap_attachment
  • From: Weizhao Ouyang <o451686892@xxxxxxxxx>
• Re: [PATCH v2 0/5] adds ovm6211 driver to staging
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] adds ovm6211 driver to staging
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• Re: [PATCH v2] dma-buf: dma-heap: Add a size check for allocation
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH RESEND] dma-buf: heaps: Fix mutex lock area and generalize struct dma_heap_attachment
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [GIT PULL for v5.17-rc1] New year's media updates
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• [PATCH 5/5] drm/vc4: dpi: Support DPI interface in mode3 for RGB565
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 4/5] drm/panel: simple: add Geekworm MZP280 Panel
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 3/5] dt-bindings: display: simple: add Geekworm MZP280 Panel
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 2/5] media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 0/5] Support Geekworm MZP280 Panel for Raspberry Pi
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 1/5] media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [RFC PATCH 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 6/8] media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_*_LANE flags
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 7/8] media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_CHANNEL_* flags
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 5/8] media: v4l2-mediabus: Use structures to describe bus configuration
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 3/8] media: v4l2-subdev: Drop .set_mbus_config() operation
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 4/8] media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.h
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 1/8] media: pxa_camera: Drop usage of .set_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Make sure we parse really received data.
  • From: Hans Petter Selasky <hps@xxxxxxxxxxx>
• Re: [PATCH] media: pt3: Use dma_set_mask_and_coherent() and simplify code
  • From: Akihiro TSUKADA <tskd08@xxxxxxxxx>
• Re: [PATCH] Make sure we parse really received data.
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH v7 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH v7 1/2] dt-binding: media: document ON Semi AR0521 sensor bindings
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH v7 0/2] On Semi AR0521 sensor driver
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• Re: [PATCH v2 0/5] adds ovm6211 driver to staging
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/24] drm/amdgpu: use dma_resv_for_each_fence for CS workaround
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Marko Mäkelä <marko.makela@xxxxxx>
• Re: [PATCH v2 2/2] media: i2c: Add OV1063x sensor driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH 04/24] dma-buf: add dma_resv_get_singleton v2
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• [PATCH v2 5/5] adds i2c/ explicitly to Makefile
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v2 4/5] adds drivers/staging/media/i2c/Kconfig entry
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v2 3/5] adds ovm6211 entry to Makefile
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v2 1/5] adds ovm6211 driver to staging
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v2 2/5] adds ovm6211 entry to Kconfig
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• [PATCH v2 0/5] adds ovm6211 driver to staging
  • From: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH 01/24] dma-buf: add dma_resv_replace_fences
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Marko Mäkelä <marko.makela@xxxxxx>
• Re: [PATCH v2 2/2] media: i2c: Add OV1063x sensor driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: Inconsistent RC5 ir-keytable events
  • From: Sean Young <sean@xxxxxxxx>
• Build failed in Jenkins: media-build #3758
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
  • From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
• [PATCH] media: i2c: max9271: Add header include guards to max9271.h
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH] media: i2c: rdacm20: Fix indentation in comment
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• [PATCH] media: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Build failed in Jenkins: media-build #3757
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH v2 12/11] media: i2c: max9286: Print power-up GMSL link configuration
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] media: pt3: Use dma_set_mask_and_coherent() and simplify code
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v2 11/11] media: i2c: max9286: Select HS as data enable signal
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 06/11] media: i2c: max9286: Rename MAX9286_DATATYPE_RAW11 to RAW12
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 05/11] media: i2c: max9286: Support manual framesync operation
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 03/11] dt-bindings: media: i2c: max9286: Add property to select bus width
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 01/11] dt-bindings: media: i2c: max9286: Add support for per-port supplies
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 00/11] media: i2c: max9286: Small new features
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH] media: i2c: rdacm20: Fix indentation in comment
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3756
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [GIT PULL for v5.17-rc1] New year's media updates (#79714)
  • From: Jenkins <jenkins@xxxxxxxxxxx>
• [GIT PULL for v5.17-rc1] New year's media updates
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [GIT PULL for v5.17-rc1] New year's media updates
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [mchehab-experimental:master 115/390] drivers/staging/media/atomisp//pci/isp2400_input_system_local.h:32:40: warning: redefinition of typedef 'input_system_cfg2400_t' is a C11 feature
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] Make sure we parse really received data.
  • From: Hans Petter Selasky <hps@xxxxxxxxxxx>
• Build failed in Jenkins: media-build #3755
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH] media: vidtv: Check for null return of vzalloc
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• [PATCH v2] media: dvb-frontends: a8293: fix LNB powerup failure in PCTV 461e
  • From: Chuck Ritola <cjritola@xxxxxxxxx>
• [PATCH] udmabuf: validate ubuf->pagecount
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [syzbot] general protection fault in sg_alloc_append_table_from_pages
  • From: syzbot <syzbot+2c56b725ec547fa9cb29@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] general protection fault in sg_alloc_append_table_from_pages
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• [PATCH v3] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Build failed in Jenkins: media-build #3754
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• cron job: media_tree daily build: WARNINGS
  • From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
• Re: [PATCH v5 09/14] media: cadence: csi2rx: Add link validation
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/14] media: cadence: csi2rx: Add external DPHY support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/14] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 02/14] media: cadence: csi2rx: Cleanup media entity properly
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Status of selection.svg update (was Re: [PATCH 0/3] docs: sphinx/kfigure.py: Improve conversion to PDF)
  • From: Akira Yokosawa <akiyks@xxxxxxxxx>
• Re: [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Status of selection.svg update (was Re: [PATCH 0/3] docs: sphinx/kfigure.py: Improve conversion to PDF)
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• Status of selection.svg update (was Re: [PATCH 0/3] docs: sphinx/kfigure.py: Improve conversion to PDF)
  • From: Akira Yokosawa <akiyks@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• RE: [PATCH] media: ov5675: use group write to update digital gain
  • From: "Cao, Bingbu" <bingbu.cao@xxxxxxxxx>
• Re: [PATCH] media: ov5675: use group write to update digital gain
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3753
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH] media: ov5675: use group write to update digital gain
  • From: Bingbu Cao <bingbu.cao@xxxxxxxxx>
• [PATCH] v4l2-ctl: Operate on output device if specified
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2, 03/12] media: mtk-vcodec: get capture queue buffer size from scp
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH RESEND] dma-buf: heaps: Fix mutex lock area and generalize struct dma_heap_attachment
  • From: Weizhao Ouyang <o451686892@xxxxxxxxx>
• Re: [PATCH v2, 03/12] media: mtk-vcodec: get capture queue buffer size from scp
  • From: "yunfei.dong@xxxxxxxxxxxx" <yunfei.dong@xxxxxxxxxxxx>
• Re: [PATCH v2, 05/12] media: mtk-vcodec: Call v4l2_m2m_set_dst_buffered() set capture buffer buffered
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v2, 04/12] media: mtk-vcodec: Read max resolution from dec_capability
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v2, 03/12] media: mtk-vcodec: get capture queue buffer size from scp
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v2, 02/12] media: mtk-vcodec: Using firmware type to separate different firmware architecture
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v2, 01/12] media: mtk-vcodec: Add vdec enable/disable hardware helpers
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH] media: ov8856: apply digital gain by setting global gain control register
  • From: Bingbu Cao <bingbu.cao@xxxxxxxxx>
• [PATCH] media: ir_toy: free before error exiting
  • From: Peiwei Hu <jlu.hpw@xxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v2, 09/12] media: mtk-vcodec: disable vp8 4K capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 12/12] media: mtk-vcodec: Add h264 decoder driver for mt8192
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 11/12] media: mtk-vcodec: Extract H264 common code
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 10/12] media: mtk-vcodec: Fix v4l2-compliance fail
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 07/12] media: mtk-vcodec: Refactor supported vdec formats and framesizes
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 08/12] media: mtk-vcodec: Add format to support MT21C
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 02/12] media: mtk-vcodec: Using firmware type to separate different firmware architecture
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 00/12] media: mtk-vcodec: support for MT8192 decoder
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 04/12] media: mtk-vcodec: Read max resolution from dec_capability
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 06/12] media: mtk-vcodec: Refactor get and put capture buffer flow
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 05/12] media: mtk-vcodec: Call v4l2_m2m_set_dst_buffered() set capture buffer buffered
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 03/12] media: mtk-vcodec: get capture queue buffer size from scp
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v2, 01/12] media: mtk-vcodec: Add vdec enable/disable hardware helpers
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3752
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 04/13] media: s5p-mfc: Use platform_get_irq() to get the interrupt
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RFC 15/32] media: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH] media: atomisp: Do not define input_system_cfg2400_t twice
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [linux-next:master 838/9897] ERROR: modpost: "v4l2_async_register_subdev" [drivers/staging/media/max96712/max96712.ko] undefined!
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH v2] dma-buf: dma-heap: Add a size check for allocation
  • From: <guangming.cao@xxxxxxxxxxxx>
• [PATCH v2] dma-buf: dma-heap: Add a size check for allocation
  • From: <guangming.cao@xxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3751
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH RFT 5/7] media: hantro: jpeg: Add COM segment to JPEG header to align image scan
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v2 7/7] meida: mtk-vcodec: remove unused func parameter
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v2 6/7] media: mtk-vcodec: don't check return val of mtk_venc_get_q_data
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] media: mtk-vcodec: replace func vidioc_try_fmt with two funcs for out/cap
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• [PATCH] dma-buf: heaps: Fix mutex lock area and generalize struct dma_heap_attachment
  • From: Weizhao Ouyang <o451686892@xxxxxxxxx>
• Re: [PATCH RFT 5/7] media: hantro: jpeg: Add COM segment to JPEG header to align image scan
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Build failed in Jenkins: media-build #3750
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [linux-next:master 838/9897] ERROR: modpost: "v4l2_async_register_subdev" [drivers/staging/media/max96712/max96712.ko] undefined!
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] bttv: fix WARNING regression on tunerless devices
  • From: Ondrej Zary <linux@xxxxxxx>
• Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Build failed in Jenkins: media-build #3749
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: ERROR: modpost: "__divsi3_table" [lib/lz4/lz4_compress.ko] undefined!
  • From: Max Filippov <jcmvbkbc@xxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Build failed in Jenkins: media-build #3748
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• [PATCH RFT 7/7] media: hantro: output encoded JPEG content directly to capture buffers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 3/7] media: hantro: Support cropping visible area for encoders
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 6/7] media: hantro: Implement V4L2_CID_JPEG_ACTIVE_MARKER control
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 5/7] media: hantro: jpeg: Add COM segment to JPEG header to align image scan
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 4/7] media: hantro: jpeg: Add JFIF APP0 segment to JPEG encoder output
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 2/7] media: hantro: Fix overfill bottom register field name
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 1/7] media: hantro: jpeg: Relax register writes before write starting hardware
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH RFT 0/7] media: hantro: jpeg: Various improvements
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• cron job: media_tree daily build: WARNINGS
  • From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
• [PATCH v1] media: imx-jpeg: use NV12M to represent non contiguous NV12
  • From: Ming Qian <ming.qian@xxxxxxx>
• [PATCH v8 1/4] media: v4l: Add definition for the Aspeed JPEG format
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v8 3/4] media: aspeed: Support aspeed mode to reduce compressed data
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v8 0/4] add aspeed-jpeg support for aspeed-video
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v8 4/4] media: aspeed: Extend debug message
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v8 2/4] media: v4l2-ctrls: Reserve controls for ASPEED
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v5 14/14] media: dt-bindings: Convert Cadence CSI2RX binding to YAML
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 13/14] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 11/14] media: ti: Add CSI2RX support for J721E
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 12/14] media: dt-bindings: Make sure items in data-lanes are unique
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 10/14] media: Re-structure TI platform drivers
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 04/14] media: cadence: csi2rx: Add external DPHY support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 09/14] media: cadence: csi2rx: Add link validation
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 08/14] media: cadence: csi2rx: Populate subdev devnode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 07/14] media: cadence: csi2rx: Fix stream data configuration
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 06/14] media: cadence: csi2rx: Set the STOP bit when stopping a stream
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 05/14] media: cadence: csi2rx: Soft reset the streams before starting capture
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 02/14] media: cadence: csi2rx: Cleanup media entity properly
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 03/14] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 01/14] media: cadence: csi2rx: Unregister v4l2 async notifier
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v5 00/14] CSI2RX support on J721E
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH] Make sure we parse really received data.
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 02/13] media: camss: Use platform_get_irq_byname() to get the interrupt
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 13/13] media: coda: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 11/13] media: s5p-g2d: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 12/13] media: mtk-vpu: Drop unnecessary call to platform_get_resource()
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 10/13] media: exynos4-is: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 09/13] media: mtk-vcodec: Drop unnecessary call to platform_get_resource()
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 08/13] media: marvell-ccic: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 07/13] media: exynos-gsc: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 05/13] media: stm32-dma2d: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 04/13] media: s5p-mfc: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 03/13] media: bdisp: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 02/13] media: camss: Use platform_get_irq_byname() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 00/13] media: Use platform_get_irq*() variants to fetch IRQ's
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/19] CAMSS: Add SM8250 support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Build failed in Jenkins: media-build #3747
  • From: Jenkins Builder Robot <jenkins@xxxxxxxxxxx>
• Re: completely rework the dma_resv semantic
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• [PATCH v6 2/2] Driver for ON Semi AR0521 camera sensor
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH v6 1/2] dt-binding: media: document ON Semi AR0521 sensor bindings
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH v6 0/2] On Semi AR0521 sensor driver
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH] drm/i915/selftests: fix potential refcnt issue of a dma_buf object
  • From: Xin Xiong <xiongx18@xxxxxxxxxxxx>
• Re: completely rework the dma_resv semantic
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 22/24] dma-buf: wait for map to complete for static attachments
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 21/24] dma-buf: add DMA_RESV_USAGE_BOOKKEEP
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 20/24] dma-buf: add DMA_RESV_USAGE_KERNEL
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 18/24] dma-buf: add enum dma_resv_usage v3
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 17/24] drm/amdgpu: use dma_resv_get_singleton in amdgpu_pasid_free_cb
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 16/24] drm/nouveau: support more than one write fence in fenv50_wndw_prepare_fb
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 15/24] drm: support more than one write fence in drm_gem_plane_helper_prepare_fb
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 14/24] dma-buf/drivers: make reserving a shared slot mandatory v2
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 13/24] dma-buf: drop the DAG approach for the dma_resv object
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 12/24] dma-buf: finally make dma_resv_excl_fence private
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 11/24] drm/amdgpu: use dma_resv_for_each_fence for CS workaround
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 10/24] drm/amdgpu: remove excl as shared workarounds
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 08/24] drm/vmwgfx: stop using dma_resv_excl_fence
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 09/24] drm/radeon: stop using dma_resv_excl_fence
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 07/24] drm/nouveau: stop using dma_resv_excl_fence
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 06/24] drm/etnaviv: stop using dma_resv_excl_fence
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 05/24] RDMA: use dma_resv_wait() instead of extracting the fence
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 04/24] dma-buf: add dma_resv_get_singleton v2
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 03/24] dma-buf: drop excl_fence parameter from dma_resv_get_fences
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 02/24] dma-buf: finally make the dma_resv_list private
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 01/24] dma-buf: add dma_resv_replace_fences
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] media: camss: csiphy: Move to hardcode CSI Clock Lane number
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [GIT PULL FOR v5.17] CAMSS: Add SM8250 support (#79632)
  • From: Jenkins <jenkins@xxxxxxxxxxx>
• [PATCH 4/4] media: davinci: vpif: drop probe printk
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 0/4] media: davinci: vpif: fix use-after-free on driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/4] media: davinci: vpif: fix unbalanced runtime PM enable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/4] media: davinci: vpif: fix unbalanced runtime PM get
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 3/4] media: davinci: vpif: fix use-after-free on driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 0/2] Remove clock-lanes DT property from CAMSS
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [GIT PULL FOR v5.17] CAMSS: Add SM8250 support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 0/3] Fix streaming on/off logic
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH] Make sure we parse really received data.
  • From: Hans Petter Selasky <hps@xxxxxxxxxxx>
• Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH v2 4/4] media: aspeed: Fix timing polarity incorrect
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] media: aspeed: Correct values for detected timing
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] media: aspeed: Use FIELD_GET to improve readability
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] media: aspeed: Correct value for h-total-pixels
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH 0/4] Correct timing report
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] media: imx: imx7-media-csi: add support for imx8mq
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 3/4] media: aspeed: Correct values for detected timing
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] media: aspeed: Fix timing polarity incorrect
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] media: aspeed: Use FIELD_GET to improve readability
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] media: aspeed: Correct values for detected timing
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 4/4] media: aspeed: Fix timing polarity incorrect
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 2/4] media: aspeed: Use FIELD_GET to improve readability
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/4] media: aspeed: Correct value for h-total-pixels
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v3 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 17/19] media: camss: Add SM8250 bandwdith configuration support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 16/19] media: camss: add support for SM8250 camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 15/19] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 14/19] media: camss: Add initial support for VFE hardware version Titan 480
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 13/19] media: camss: vfe-170: fix "VFE halt timeout" error
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 12/19] media: camss: fix VFE irq name
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 11/19] media: camss: remove vdda-csiN from sdm845 resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 10/19] media: camss: csid: allow csid to work without a regulator
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 09/19] media: camss: csid-170: set the right HALT_CMD when disabled
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 08/19] media: camss: csid-170: support more than one lite vfe
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 07/19] media: camss: csid-170: remove stray comment
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 06/19] media: camss: csid-170: don't enable unused irqs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 05/19] media: camss: csid-170: fix non-10bit formats
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 04/19] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 03/19] media: camss: csiphy-3ph: disable interrupts
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 02/19] media: camss: csiphy-3ph: don't print HW version as an error
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 00/19] CAMSS: Add SM8250 support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 26/38] media: add V4L2_SUBDEV_CAP_MPLEXED
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 28/38] media: subdev: Add [GS]_ROUTING subdev ioctls and operations
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] media: i2c: dw9714: add optional regulator support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v2] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] media: platform: Add brask to the match table
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2] media: platform: Add brask to the match table
  • From: Zhuohao Lee <zhuohao@xxxxxxxxxxxx>
• Re: [PATCH] media: platform: Add brask to the match table
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] media: subdev: add subdev state locking
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] media: subdev: add active state to struct v4l2_subdev
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Fix streaming on/off logic
  • From: Hans Petter Selasky <hps@xxxxxxxxxxx>
• [PATCH] media: platform: Add brask to the match table
  • From: Zhuohao Lee <zhuohao@xxxxxxxxxxxx>
• Re: [PATCH v5 00/10] add aspeed-jpeg support for aspeed-video
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] Add driver for Renesas RZ/G2L CRU module
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v5 00/10] add aspeed-jpeg support for aspeed-video
  • From: "sakari.ailus@xxxxxxxxxxxxxxx" <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
  • From: Thomas Nizan <tomniz035@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH] udmabuf: put dmabuf in case of get fd failed
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] udmabuf: put dmabuf in case of get fd failed
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] udmabuf: put dmabuf in case of get fd failed
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 5/6] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 05/38] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 0/2] RDMA/rxe: Add dma-buf support
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• [PATCH v2] media: saa7134: use swap() to make code cleaner
  • From: davidcomponentone@xxxxxxxxx
• [PATCH] udmabuf: put dmabuf in case of get fd failed
  • From: Xianting Tian <xianting.tian@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm: fix the warnning of string style for scheduler trace.
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 3/4] media: aspeed: Support aspeed mode to reduce compressed data
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v7 1/4] media: v4l: Add definition for the Aspeed JPEG format
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v7 2/4] media: v4l2-ctrls: Reserve controls for ASPEED
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v7 0/4] add aspeed-jpeg support for aspeed-video
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v7 4/4] media: aspeed: Extend debug message
  • From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] media: i2c: IMX296 camera sensor driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] media: i2c: IMX296 camera sensor support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [syzbot] general protection fault in sg_alloc_append_table_from_pages
  • From: syzbot <syzbot+2c56b725ec547fa9cb29@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in drm_gem_object_release_handle
  • From: syzbot <syzbot+c8ae65286134dd1b800d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] general protection fault in virtio_gpu_array_put_free
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Maximilian Böhm <maximilian.boehm@xxxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Maximilian Böhm <maximilian.boehm@xxxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Robert Schlabbach <Robert.Schlabbach@xxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in drm_gem_object_release_handle
  • From: syzbot <syzbot+c8ae65286134dd1b800d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH] media: saa7134: use swap() to make code cleaner
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• cron job: media_tree daily build: WARNINGS
  • From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
• [PATCH] media: saa7134: use swap() to make code cleaner
  • From: davidcomponentone@xxxxxxxxx
• Kernel hangs after DVB patch from July 2021 with Hauppauge WinTV dualHD
  • From: Maximilian Böhm <maximilian.boehm@xxxxxxxxxx>
• Re: [PATCH v10 05/38] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 05/38] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 05/38] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
  • From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
• Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: completely rework the dma_resv semantic
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [v8.1 3/7] media: i2c: max9286: Use "maxim,gpio-poc" property
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 6/6] media: max9286: Implement get_frame_desc()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v4 5/6] media: max9286: Move format to subdev state
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [GIT PULL FOR v5.17] zoran: merge into one module, many fixes (#79583)
  • From: Jenkins <jenkins@xxxxxxxxxxx>
• [PATCH v2 6/6] media: Documentation: add documentation about subdev state
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/6] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/6] media: subdev: add active state to struct v4l2_subdev
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/6] media: subdev: pass also the active state to subdevs from ioctls
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/6] v4l: subdev active state
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/6] media: subdev: add subdev state locking
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/6] media: subdev: rename subdev-state alloc & free
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] media: max9286: Use routes to configure link order
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v4 3/6] media: max9286: Use enabled routes to calculate pixelrate
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v4 2/6] media: max9286: Implement set_routing
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• [GIT PULL FOR v5.17] zoran: merge into one module, many fixes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/6] media: subdev: add active state to struct v4l2_subdev
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 2/6] media: subdev: add active state to struct v4l2_subdev
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 6/6] media: Documentation: add documentation about subdev state
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 6/6] media: Documentation: add documentation about subdev state
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v10 05/38] media: subdev: Add v4l2_subdev_lock_and_return_state()
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>