Hi Laurent,
On Fri, Dec 17, 2021 at 04:45:02AM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thu, Dec 16, 2021 at 06:47:46PM +0100, Jacopo Mondi wrote:
> > Implement the get_frame_desc pad operation to allow retrieving the
> > stream configuration of the max9286 subdevice.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> > drivers/media/i2c/max9286.c | 53 +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 53 insertions(+)
> >
> > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> > index aa7cb7c10fc0..78988f2bdf91 100644
> > --- a/drivers/media/i2c/max9286.c
> > +++ b/drivers/media/i2c/max9286.c
> > @@ -876,6 +876,58 @@ static int max9286_set_fmt(struct v4l2_subdev *sd,
> > return ret;
> > }
> >
> > +static int max9286_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> > + struct v4l2_mbus_frame_desc *fd)
> > +{
> > + struct v4l2_subdev_route *route;
> > + struct v4l2_subdev_state *state;
> > + int ret = 0;
> > +
> > + if (pad != MAX9286_SRC_PAD)
> > + return -EINVAL;
> > +
> > + state = v4l2_subdev_lock_active_state(sd);
> > +
> > + memset(fd, 0, sizeof(*fd));
> > +
> > + /* One stream entry per each connected route. */
> > + for_each_active_route(&state->routing, route) {
> > + struct v4l2_mbus_frame_desc_entry *entry =
> > + &fd->entry[fd->num_entries];
> > + struct v4l2_mbus_framefmt *fmt;
>
> This can be const.
>
Indeed!
> > +
> > + fmt = v4l2_state_get_stream_format(state, pad,
> > + route->source_stream);
> > + if (!fmt) {
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > +
> > + /*
> > + * Assume a YUYV format (0x1e DT) and 16 bpp: we only support
> > + * these formats at the moment.
> > + */
> > + entry->stream = fd->num_entries++;
> > + entry->flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
> > + entry->length = fmt->width * fmt->height * 16 / 8;
> > + entry->pixelcode = fmt->code;
> > +
> > + /*
> > + * The source stream id corresponds to the virtual channel a
> > + * stream is output on.
> > + */
> > + entry->bus.csi2.vc = route->source_stream;
> > + entry->bus.csi2.dt = 0x1e;
>
> A header file for the CSI-2 data types could be useful (out of scope for
> this series, unless you insist :-)).
Nice try!
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Thanks
j
>
> > + }
> > +
> > + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> > +
> > +out:
> > + v4l2_subdev_unlock_state(state);
> > +
> > + return ret;
> > +}
> > +
> > static int max9286_routing_validate(struct max9286_priv *priv,
> > struct v4l2_subdev_krouting *routing)
> > {
> > @@ -1025,6 +1077,7 @@ static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
> > .enum_mbus_code = max9286_enum_mbus_code,
> > .get_fmt = v4l2_subdev_get_fmt,
> > .set_fmt = max9286_set_fmt,
> > + .get_frame_desc = max9286_get_frame_desc,
> > .set_routing = max9286_set_routing,
> > };
> >
>
> --
> Regards,
>
> Laurent Pinchart
