The power-up GMSL link configuration is controlled by the HIM and BWS
pins, whose state is reflected in register 0x1c. Print the detected
power-up config in a debug message to help debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/max9286.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 446fc238d642..f7cbfdde436e 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -1147,6 +1147,7 @@ static int max9286_setup(struct max9286_priv *priv)
(2 << 6) | (1 << 4) | (0 << 2) | (3 << 0), /* 210x */
(3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* 3210 */
};
+ int cfg;
/*
* Set the I2C bus speed.
@@ -1168,21 +1169,23 @@ static int max9286_setup(struct max9286_priv *priv)
max9286_set_video_format(priv, &max9286_default_format);
max9286_set_fsync_period(priv);
+ cfg = max9286_read(priv, 0x1c);
+ if (cfg < 0)
+ return cfg;
+
+ dev_dbg(&priv->client->dev, "power-up config: %s immunity, %u-bit bus\n",
+ cfg & MAX9286_HIGHIMM(0) ? "high" : "legacy",
+ cfg & MAX9286_BWS ? 32 : cfg & MAX9286_HIBW ? 27 : 24);
+
if (priv->bus_width) {
- int val;
-
- val = max9286_read(priv, 0x1c);
- if (val < 0)
- return val;
-
- val &= ~(MAX9286_HIBW | MAX9286_BWS);
+ cfg &= ~(MAX9286_HIBW | MAX9286_BWS);
if (priv->bus_width == 27)
- val |= MAX9286_HIBW;
+ cfg |= MAX9286_HIBW;
else if (priv->bus_width == 32)
- val |= MAX9286_BWS;
+ cfg |= MAX9286_BWS;
- max9286_write(priv, 0x1c, val);
+ max9286_write(priv, 0x1c, cfg);
}
/*
--
Regards,
Laurent Pinchart
