On Fri, 17 Dec 2021 at 09:54, Jammy Huang <jammy_huang@xxxxxxxxxxxxxx> wrote: > > This is a workaround for polarity unstable. > Sync value get by VR09C counts from sync's rising edge, which means > sync's polarity is negative if sync value is bigger than total/2. > > Signed-off-by: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx> > --- > drivers/media/platform/aspeed-video.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c > index 5ad3a20c5bac..f628f69bb7dd 100644 > --- a/drivers/media/platform/aspeed-video.c > +++ b/drivers/media/platform/aspeed-video.c > @@ -989,6 +989,15 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) > video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, > src_tb_edge); > det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync); > + /* > + * Workaround for polarity detection > + * Use sync(VR098) counts from sync's rising edge till falling > + * edge to tell sync polarity. > + */ > + if (det->vsync > (FIELD_GET(VE_MODE_DETECT_V_LINES, mds) >> 1)) Are you right shifting as this is the value / 2? I think it's clearer to write / 2 instead of >> 1. Mention in the comment that this is a workaround for when the sync value is larger than half. > + det->polarities &= ~V4L2_DV_VSYNC_POS_POL; > + else > + det->polarities |= V4L2_DV_VSYNC_POS_POL; > if (det->polarities & V4L2_DV_VSYNC_POS_POL) { > det->vbackporch = video->frame_top - det->vsync; > det->vfrontporch = > @@ -1010,6 +1019,15 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) > video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, > src_lr_edge); > det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync); > + /* > + * Workaround for polarity detection > + * Use sync(VR098) counts from sync's rising edge till falling > + * edge to tell sync polarity. > + */ > + if (det->hsync > (htotal >> 1)) > + det->polarities &= ~V4L2_DV_HSYNC_POS_POL; > + else > + det->polarities |= V4L2_DV_HSYNC_POS_POL; > if (det->polarities & V4L2_DV_HSYNC_POS_POL) { > det->hbackporch = video->frame_left - det->hsync; > det->hfrontporch = htotal - video->frame_right; > -- > 2.25.1 >