Linux Input

• Thread Index

• Re: [PATCH] HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: input: Convert gpio-keys bindings to schema
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: synaptics-rmi4 - switch to reduced reporting mode
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] HID: Sony: Add support for Gasia controllers
  • From: Martyn Welch <martyn@xxxxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• [PATCH v2 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v6] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v6] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in hiddev_disconnect
  • From: syzbot <syzbot+106b378813251e52fc5e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [git pull] Input updates for v5.5-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• RE: [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
  • From: Dexuan Cui <decui@xxxxxxxxxxxxx>
• [git pull] Input updates for v5.5-rc7
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [input:master] BUILD INCOMPLETE 273db8f03509619cd570a4b1225b399f8fb4b0b7
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] dt-bindings: convert cros-ec-keyb.txt to yaml
  • From: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: convert cros-ec-keyb.txt to yaml
  • From: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
• Re: [PATCH v12 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v12 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: Peter Hutterer <peter.hutterer@xxxxxxxxx>
• Re: [PATCH] dt-bindings: input: Convert gpio-keys bindings to schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 30/33] HID: Add quirk for Xin-Mo Dual Controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 31/33] HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 33/33] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 32/33] HID: Add quirk for incorrect input length on Lenovo Y720
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/11] HID: Add quirk for Xin-Mo Dual Controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 5/5] HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/11] HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 11/11] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/11] HID: Add quirk for incorrect input length on Lenovo Y720
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• Re: [PATCH] dt-bindings: input: Convert gpio-keys bindings to schema
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] dt-bindings: input: Convert gpio-keys bindings to schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1] Input: atmel_mxt_ts - correct local variable type
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• RE: [RFC] linux-input alps - loosing precision
  • From: "Leutwein Tobias (BEG/ENC1)" <Tobias.Leutwein@xxxxxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: Peter Hutterer <peter.hutterer@xxxxxxxxx>
• [input:master] BUILD SUCCESS 734b188136faed64b528a5a5559a32a2b8294c39
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] Input: add IOC3 serio driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2] Input: add IOC3 serio driver
  • From: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
• Re: [PATCH v2] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v2] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Input: add IOC3 serio driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/2] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/2] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: Input: da9062 - add key-opmode documentation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: Peter Hutterer <peter.hutterer@xxxxxxxxx>
• Re: [PATCH v2] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v5] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] Saitek X-52 Pro - Add HID quirk
  • From: Bryon Roche <kain@xxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Siarhei Vishniakou <svv@xxxxxxxxxx>
• [input:next] BUILD SUCCESS 0dfed6dc24576f256782d5288537927c69256081
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [input:for-linus] BUILD SUCCESS 996d5d5f89a558a3608a46e73ccd1b99f1b1d058
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: vendor-prefixes: Add Coreriver vendor prefix
  • From: Nick Reitemeyer <nick.reitemeyer@xxxxxx>
• [PATCH 3/3] Input: tm2-touchkey - add support for Coreriver TC360 variant
  • From: Nick Reitemeyer <nick.reitemeyer@xxxxxx>
• [PATCH 2/3] dt-bindings: input: add Coreriver TC360 binding
  • From: Nick Reitemeyer <nick.reitemeyer@xxxxxx>
• Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Input: pm8xxx-vib - fix handling of separate enable register
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Daniel Ogorchock <djogorchock@xxxxxxxxx>
• Re: [PATCH 4/4] Input: exc3000: add firmware update support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/4] Input: exc3000: expose type, model and firmware revision as sysfs attributes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] Input: exc3000: query and show type, model and firmware revision info
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [RFC PATCH] HID: mcp2221: mcp_smbus_xfer() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/1] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
  • From: Pedro Vanzella <pedro@xxxxxxxxxxxxxxxxx>
• [PATCH] Input: synaptics-rmi4 - switch to reduced reporting mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 1/1] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v1 0/1] HID: mcp2221: add usb to i2c-smbus host bridge driver
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [BUG + PATCH] HID ELAN9038 probe fails with "report is too long"
  • From: js <sym.i.nem@xxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Daniel Ogorchock <djogorchock@xxxxxxxxx>
• Re: [PATCH] input: appletouch: shut up -Wmaybe-uninitialized warning
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• [input:for-linus] BUILD SUCCESS ba9a103f40fc4a3ec7558ec9b0b97d4f92034249
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Hotkey activation of a HID function
  • From: Pavel Balan <admin@xxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Hotkey activation of a HID function
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [RFC] linux-input alps - loosing precision
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] input: max77650-onkey: add of_match table
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH for v5.5 2/2] Input: rmi_f54: read from FIFO in 32 byte blocks
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH for v5.5 1/2] Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v4 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 082/671] Input: nomadik-ske-keypad - fix a loop timeout test
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 018/174] Input: nomadik-ske-keypad - fix a loop timeout test
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 023/251] Input: nomadik-ske-keypad - fix a loop timeout test
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 035/371] Input: nomadik-ske-keypad - fix a loop timeout test
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] DA9063 Onkey Improvements and Fixes
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH] HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH v4] HID: logitech-dj: add full support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• [PATCH v4] HID: logitech-dj: add full support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• RE: [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
  • From: Dexuan Cui <decui@xxxxxxxxxxxxx>
• [PATCH v3] HID: logitech-dj: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• [PATCH] HID: hiddev: Fix race in in hiddev_disconnect()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>, syzbot <syzbot+784ccb935f9900cc7c9e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 06/10] selftests: firmware: Add firmware_request_platform tests
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v12 05/10] test_firmware: add support for firmware_request_platform
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v12 10/10] platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 09/10] platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 08/10] Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 07/10] Input: silead - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 05/10] test_firmware: add support for firmware_request_platform
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 06/10] selftests: firmware: Add firmware_request_platform tests
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 04/10] firmware: Add new platform fallback mechanism and firmware_request_platform()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 02/10] efi: Add embedded peripheral firmware support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 01/10] efi: Export boot-services code and data as debugfs-blobs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] Input: add IOC3 serio driver
  • From: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
• [PATCH for v5.5 2/2] Input: rmi_f54: read from FIFO in 32 byte blocks
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH for v5.5 1/2] Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH for v5.5 0/2] input/rmi4 regression fix
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 1/2] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2 0/2] Input: axp20x-pek wakeup enablement
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2 1/2] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH 1/3] Input: axp20x-pek - Remove unique wakeup event handling
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 1/1] HID: hiddev: remove a duplicated check
  • From: "Leizhen (ThunderTown)" <thunder.leizhen@xxxxxxxxxx>
• [PATCH] Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: touchscreen: Add touchscreen schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] Input: pm8xxx-vib - fix handling of separate enable register
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Write in hiddev_disconnect
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Write in hiddev_disconnect
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/1] HID: hiddev: remove a duplicated check
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• KASAN: use-after-free Write in hiddev_disconnect
  • From: syzbot <syzbot+784ccb935f9900cc7c9e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• KASAN: use-after-free Read in hiddev_disconnect
  • From: syzbot <syzbot+106b378813251e52fc5e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/1] HID: hiddev: remove a duplicated check
  • From: "Leizhen (ThunderTown)" <thunder.leizhen@xxxxxxxxxx>
• Re: [PATCH 3/3] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] Input: elan_i2c - High resolution report for new pattern 2
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• Re: [PATCH 2/3] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 3/3] Input: elan_i2c - Modify the IAP related functions for new pattern 2
  • From: JINGLE WU <jingle.wu@xxxxxxxxxx>
• [PATCH 2/3] Input: elan_i2c - High resolution report for new pattern 2
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 1/3] Input: elan_i2c - Correct the value of ic_type for old and new pattern of firmware
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
  • From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
• Re: [PATCH] HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH] HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] iio: light: Add DT bindings for GP2AP002
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/3] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH] Input: keyspan-remote: fix control-message timeouts
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] Input: keyspan-remote: fix control-message timeouts
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v11 05/10] test_firmware: add support for firmware_request_platform
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH v11 05/10] test_firmware: add support for firmware_request_platform
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v11 05/10] test_firmware: add support for firmware_request_platform
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 1/3] Input: axp20x-pek - Remove unique wakeup event handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/3] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/3] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/3] Input: axp20x-pek - Remove unique wakeup event handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 2/3] input: misc: da9063_onkey: add mode change support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/3] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 1/3] Input: axp20x-pek - Remove unique wakeup event handling
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH 3/3] Input: axp20x-pek - Enable wakeup for all AXP variants
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH 2/3] Input: axp20x-pek - Respect userspace wakeup configuration
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2] HID: logitech: drop outdated references to unifying receivers
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH v11 04/10] firmware: Add new platform fallback mechanism and firmware_request_platform()
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Andy Lutomirski <luto@xxxxxxxxxx>
• [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] Input: exc3000: split MT event handling from IRQ handler
  • From: Chris Healy <cphealy@xxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v4] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v11 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 06/10] selftests: firmware: Add firmware_request_platform tests
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 09/10] platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 10/10] platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 08/10] Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 07/10] Input: silead - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 05/10] test_firmware: add support for firmware_request_platform
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 04/10] firmware: Add new platform fallback mechanism and firmware_request_platform()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 02/10] efi: Add embedded peripheral firmware support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 01/10] efi: Export boot-services code and data as debugfs-blobs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v11 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v3] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] input: max77650-onkey: add of_match table
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/3] Input: goodix - use string-based chip ID
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: ads7846: use new `delay` structure for SPI transfer delays
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/7] Input: fix USB alsetting bugs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v10 05/10] test_firmware: add support for firmware_request_platform
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input: max77650-onkey: add of_match table
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 2/3] Input: goodix - use string-based chip ID
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [PATCH 1/3] dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [PATCH 0/3] Add support for Goodix GT917S touch controller
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [PATCH 3/3] Input: goodix - Add support for Goodix GT917S
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [PATCH] input: max77650-onkey: add of_match table
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v6 00/48] atmel_mxt_ts misc
  • From: Jiada Wang <jiada_wang@xxxxxxxxxx>
• [PATCH 1/2 v3] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v3] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v3] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V2 1/2] Documentation: devicetree: bindings: input
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 5/6] Input: edt-ft5x06 - use pm core to enable/disable the wake irq
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 4/6] Input: edt-ft5x06 - make wakeup-source switchable
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: Input: edt-ft5x06 - document wakeup-source capability
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 2/6] Input: edt-ft5x06 - alphabetical include reorder
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/6] Input: edt-ft5x06: work around first register access error
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: config option to change key soft autorepeat behavior
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [git pull] Input updates for v5.5-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• High CPU usage on RMI4 interrupt with Synaptics touchpad
  • From: Mike Murdoch <main.haarp@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Carl Mueller <carmueller@xxxxxxxxx>
• Re: [RFC] input: cap11xx: plasma globe proof
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [git pull] Input updates for v5.5-rc5
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• [RFC] linux-input alps
  • From: "Leutwein Tobias (BEG/ENC1)" <Tobias.Leutwein@xxxxxxxxxxxx>
• Re: [PATCH] HID: steam: Fix input device disappearing
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Daniel Ogorchock <djogorchock@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Daniel Ogorchock <djogorchock@xxxxxxxxx>
• [PATCH 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 1/4] SFH: Add maintainer list and documentation for AMD SFH based on HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 0/4] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Carl Mueller <carmueller@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Daniel Ogorchock <djogorchock@xxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v1] iio: light: Add DT bindings for GP2AP002
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• RE: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: "Johnny.Chuang" <johnny.chuang@xxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/6] Input: edt-ft5x06: work around first register access error
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: Input: edt-ft5x06 - document wakeup-source capability
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] EDT-FT5x06 improvements
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 6/6] Input: edt-ft5x06 - improve power management operations
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] Input: edt-ft5x06 - use pm core to enable/disable the wake irq
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] Input: edt-ft5x06 - make wakeup-source switchable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] Input: edt-ft5x06 - alphabetical include reorder
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH v2 3/3] dt-bindings: Input: da9062 - fix dlg,disable-key-power description
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: touchscreen: Add touchscreen schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 0/2] Convert touchscreen bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 2/3] input: misc: da9063_onkey: add mode change support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] drivers: input: keyboard
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Resend [PATCH V2] dt-bindings:input:keyboard:add MediaTek keypad controller binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Resend [PATCH V2] dt-bindings:input:keyboard:add MediaTek keypad controller binding
  • From: fengping yu <fengping.yu@xxxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] input: appletouch: shut up -Wmaybe-uninitialized warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] HID: steam: Fix input device disappearing
  • From: Rodrigo Rivas Costa <rodrigorivascosta@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: touchscreen: Add touchscreen schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 2/4] Input: exc3000: query and show type, model and firmware revision info
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] Input: exc3000: expose type, model and firmware revision as sysfs attributes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] Input: exc3000: add firmware update support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] Input: exc3000: split MT event handling from IRQ handler
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH 0/2] Convert Goodix touchscreen to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 1/2] dt-bindings: touchscreen: Add touchscreen schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: Input: da9062 - fix dlg,disable-key-power description
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
  • From: Dexuan Cui <decui@xxxxxxxxxxxxx>
• Re: [PATCH v10 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v10 05/10] test_firmware: add support for firmware_request_platform
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v2] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• [PATCH v3 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] input: max77650-onkey: add of_match table
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v10 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v10 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 10/10] Input: goodix - Restore config on resume if necessary
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 09/10] Input: goodix - Make goodix_send_cfg() take a raw buffer as argument
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 08/10] Input: goodix - Save a copy of the config from goodix_read_config()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 07/10] Input: goodix - Move defines to above struct goodix_ts_data declaration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 04/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Cherry Trail devices
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 06/10] Input: goodix - Add support for controlling the IRQ pin through ACPI methods
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 05/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Bay Trail devices
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 02/10] Input: goodix - Make loading the config from disk independent from the GPIO setup
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 03/10] Input: goodix - Make resetting the controller at probe independent from the GPIO setup
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 01/10] Input: goodix - Refactor IRQ pin GPIO accesses
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• Hotkey activation of a HID function
  • From: Pavel Balan <admin@xxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v10 12/12] HID: nintendo: add support for charging grip
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 11/12] HID: nintendo: add IMU support
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 10/12] HID: nintendo: set controller uniq to MAC
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 09/12] HID: nintendo: patch hw version for userspace HID mappings
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 08/12] HID: nintendo: reduce device removal subcommand errors
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 07/12] HID: nintendo: send subcommands after receiving input report
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 06/12] HID: nintendo: improve subcommand reliability
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 05/12] HID: nintendo: add rumble support
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 04/12] HID: nintendo: add home led support
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 03/12] HID: nintendo: add power supply support
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 02/12] HID: nintendo: add player led support
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 01/12] HID: nintendo: add nintendo switch controller driver
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• [PATCH v10 00/12] HID:nintendo
  • From: "Daniel J. Ogorchock" <djogorchock@xxxxxxxxx>
• Re: [PATCH] HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH 4/6] cap11xx: add register definition for LED_LINK
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] cap11xx: support cap1208
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] cap11xx: export major chip settings to sysfs
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] cap11xx: polling mode without irq
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] cap11xx: enable all 8 inputs
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [RFC] input: cap11xx: plasma globe proof
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] cap11xx: set device driver_data
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• My computer tells me to write to you: "My Touchpad can support a different bus"
  • From: "D4rktrick1337@xxxxxxxxx" <d4rktrick1337@xxxxxxxxx>
• [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v1] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] [serio] add support for Gigabyte M1405 netbook
  • From: Eitan Adler <lists@xxxxxxxxxxxxxx>
• [PATCH] HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH] HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/1] HID: hiddev: remove a duplicated check
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] hid: hid-picolcd: fix possible sleep-in-atomic-context bug
  • From: Bruno Prémont <bonbons@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Dmitry Mastykin <mastichi@xxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RESEND PATCH V8 3/3] Input: new da7280 haptic driver
  • From: Roy Im <roy.im.opensource@xxxxxxxxxxx>
• [RESEND PATCH V8 0/3] da7280: haptic driver submission
  • From: Roy Im <roy.im.opensource@xxxxxxxxxxx>
• [RESEND PATCH V8 2/3] dt-bindings: input: Add document bindings for DA7280
  • From: Roy Im <roy.im.opensource@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: input: elants-i2c: Document eKTF3624
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: input: elants-i2c: Document eKTF3624
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 8/9] dt-bindings: input: elants-i2c: Document common touchscreen properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v2] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• [PATCH v2] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Pan Zhang <zhangpan26@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] HID: wacom: Recognize new MobileStudio Pro PID
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: intel-ish-hid: ipc: add CMP device id
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] HID: hiddev: fix mess in hiddev_open()
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v6] hid-logitech-hidpp: read battery voltage from newer devices
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v3] HID: logitech: Add MX Master 3 Mouse
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v8 0/2] Logitech HID++ Bluetooth LE support
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• KASAN: use-after-free Read in hidinput_hid_event
  • From: syzbot <syzbot+c961cb836a707f66e2f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Dmitry Mastykin <mastichi@xxxxxxxxx>
• KASAN: slab-out-of-bounds Read in hidinput_hid_event
  • From: syzbot <syzbot+00eaa791c74b27f5e7b1@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/2] Logitech HID++ Bluetooth LE support
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: Re: [PATCH v2] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] hid: hid-picolcd: fix possible sleep-in-atomic-context bug
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] hid: hid-picolcd: fix possible sleep-in-atomic-context bug
  • From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
• [PATCH] hid: hid-lg4ff: fix possible sleep-in-atomic-context bug
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH] hid: hid-picolcd: fix possible sleep-in-atomic-context bug
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Input: axp20x-pek - make device attributes static
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: input/touchscreen: add bindings for zinitix
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] HID: hiddev: fix mess in hiddev_open()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: axp20x-pek - make device attributes static
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] RFC: platform driver registering via initcall tables
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] RFC: platform driver registering via initcall tables
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: Input: drop msm-vibrator in favor of clk-vibrator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] RFC: platform driver registering via initcall tables
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] RFC: platform driver registering via initcall tables
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• [PATCH] Input: apbps2 - add __iomem to register struct
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: Re: [PATCH v2] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Pan Zhang <zhangpan26@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v9 00/10] HID: nintendo
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH] RFC: platform driver registering via initcall tables
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] RFC: platform driver registering via initcall tables
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH] drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  • From: z00417012 <zhangpan26@xxxxxxxxxx>
• [PATCH] HID: intel-ish-hid: ipc: add CMP device id
  • From: Even Xu <even.xu@xxxxxxxxx>
• Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler
  • From: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
• Interface design advice
  • From: Pavel Balan <admin@xxxxxxxxx>
• [PATCH] HID: wacom: Recognize new MobileStudio Pro PID
  • From: "Gerecke, Jason" <killertofu@xxxxxxxxx>
• Re: hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Hamza Attak <hamza@xxxxxxxx>
• Re: hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• [PATCH 1/1] input: mouse: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/1] input: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Hamza Attak <hamza@xxxxxxxx>
• Re: hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Filipe Laíns <lains@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• hid-logitech-hidpp / hid-logitech-dj driver hiding inputs and breaking Logitech G700s buttons
  • From: Hamza Attak <hamza@xxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/24] Input: input_event: fix struct padding on sparc64
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] input: keyboard: imx_sc_key: Only take the valid data from SCU firmware as key state
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2 01/24] Input: input_event: fix struct padding on sparc64
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] HID: hid-input: clear unmapped usages
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] Add an I2C HID quirk for incorrect input length.
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: add support for setting the duty cycle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH RFC 0/2] kcov: collect coverage from usbhid interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v2] HID: hid-input: clear unmapped usages
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2] HID: hid-input: clear unmapped usages
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: asus: Ignore Asus vendor-page usage-code 0xff events
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: Add quirk for Xin-Mo Dual Controller
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: Fix slab-out-of-bounds read in hid_field_extract
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] HID: usbhid: kcov: add annotations for coverage collection
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH] input: keyboard: imx_sc_key: Only take the valid data from SCU firmware as key state
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• RE: [PATCH] Input: elants_i2c - Add Remark ID check flow in firmware update function
  • From: "Johnny.Chuang" <johnny.chuang@xxxxxxxxxx>
• Re: [PATCH v2 2/9] input: elants: support old touch report format
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] Input: pm8xxx-vib - fix handling of separate enable register
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Input: pm8xxx-vib - fix handling of separate enable register
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/9] input: elants: support old touch report format
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: elants_i2c - Add Remark ID check flow in firmware update function
  • From: "'Dmitry Torokhov'" <dmitry.torokhov@xxxxxxxxx>
• Re: вопрос по suspend/resume в goodix
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH RFC 2/2] HID: usbhid: kcov: add annotations for coverage collection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH RFC 1/2] kcov: collect coverage from interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH RFC 0/2] kcov: collect coverage from usbhid interrupts
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 0/7] Input: fix USB alsetting bugs
  • From: Vladis Dronov <vdronov@xxxxxxxxxx>
• RE: [PATCH v2 3/3] dt-bindings: Input: da9062 - fix dlg,disable-key-power description
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] dt-bindings: input: elants-i2c: Document common touchscreen properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 8/9] dt-bindings: input: elants-i2c: Document common touchscreen properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 2/9] input: elants: support old touch report format
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 6/9] input: elants: read touchscreen size for EKTF3624
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 3/9] input: elants: remove unused axes
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 1/9] input: elants: document some registers and values
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 5/9] input: elants: refactor elants_i2c_execute_command()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4] input: keyboard: gpio_keys_polled: use gpio lookup table
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH] Input: pm8xxx-vib - fix handling of separate enable register
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH] HID: Fix slab-out-of-bounds read in hid_field_extract
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 008/134] Input: atmel_mxt_ts - disable IRQ across suspend
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 025/134] Input: st1232 - do not reset the chip too early
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 060/134] Input: ili210x - handle errors from input_mt_init_slots()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2 0/9] input: elants: Support Asus TF300T touchscreen
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 2/9] input: elants: support old touch report format
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 1/9] input: elants: document some registers and values
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 3/9] input: elants: remove unused axes
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 4/9] input: elants: override touchscreen info with DT properties
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 5/9] input: elants: refactor elants_i2c_execute_command()
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 7/9] input: elants: support 0x66 reply opcode for reporting touches
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 8/9] dt-bindings: input: elants-i2c: Document common touchscreen properties
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 9/9] dt-bindings: input: elants-i2c: Document eKTF3624
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2 6/9] input: elants: read touchscreen size for EKTF3624
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 075/134] HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 078/134] HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 082/134] HID: Improve Windows Precision Touchpad detection.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 04/79] Input: atmel_mxt_ts - disable IRQ across suspend
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 49/79] HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 52/79] HID: Improve Windows Precision Touchpad detection.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 53/79] HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/42] Input: atmel_mxt_ts - disable IRQ across suspend
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 03/37] Input: atmel_mxt_ts - disable IRQ across suspend
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 26/37] HID: Improve Windows Precision Touchpad detection.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 30/42] HID: Improve Windows Precision Touchpad detection.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/58] Input: atmel_mxt_ts - disable IRQ across suspend
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 34/58] HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 36/58] HID: Improve Windows Precision Touchpad detection.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 47/79] HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 083/134] HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 079/134] HID: i2c-hid: fix no irq after reset on raydium 3118
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] HID: hidraw: add support uniq ioctl
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: Fix slab-out-of-bounds read in hid_field_extract
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 4/7] Input: gtco: fix endpoint sanity check
  • From: Vladis Dronov <vdronov@xxxxxxxxxx>
• Re: [PATCH 2/7] Input: aiptek: fix endpoint sanity check
  • From: Vladis Dronov <vdronov@xxxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH] HID: Fix slab-out-of-bounds read in hid_field_extract
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] input: elants: read touchscreen size for EKTF3624
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/6] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH] Input: ads7846: use new `delay` structure for SPI transfer delays
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/7] Input: pegasus_notetaker: fix endpoint sanity check
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v10 04/10] firmware: Add new platform fallback mechanism and firmware_request_platform()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 06/10] selftests: firmware: Add firmware_request_platform tests
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: add support for setting the duty cycle
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v10 07/10] Input: silead - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 09/10] platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 10/10] platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 08/10] Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 05/10] test_firmware: add support for firmware_request_platform
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 03/10] firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 02/10] efi: Add embedded peripheral firmware support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 01/10] efi: Export boot-services code and data as debugfs-blobs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v10 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/7] Input: aiptek: use descriptors of current altsetting
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/7] Input: pegasus_notetaker: fix endpoint sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/7] Input: aiptek: fix endpoint sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 7/7] Input: sur40: fix interface sanity checks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 4/7] Input: gtco: fix endpoint sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 5/7] Input: gtco: fix extra-descriptor debug message
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 6/7] Input: gtco: drop redundant variable reinit
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 0/7] Input: fix USB alsetting bugs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] input: max77650-onkey: add of_match table
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• RE: [PATCH] Input: elants_i2c - Add Remark ID check flow in firmware update function
  • From: "Johnny.Chuang" <johnny.chuang@xxxxxxxxxx>
• [PATCH] Input: elants_i2c - Add Remark ID check flow in firmware update function
  • From: "Johnny.Chuang" <johnny.chuang@xxxxxxxxxx>
• [PATCH] Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2 5/5] Input: edt-ft5x06 - improve power management operations
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] Input: edt-ft5x06 - make wakeup-source switchable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: Input: da9062 - fix dlg,disable-key-power description
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] clk: qcom: add support for setting the duty cycle
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 6/6] input: elants: read touchscreen size for EKTF3624
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 5/6] input: elants: refactor elants_i2c_execute_command()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 6/6] input: elants: read touchscreen size for EKTF3624
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 0/6] input: elants: Support Asus TF300T touchscreen
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 3/6] input: elants: support common touchscreen DT properties
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 2/6] input: elants: support old touch report format
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 1/6] input: elants: document some registers and values
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 4/6] input: elants: detect max_x/y from hardware
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 6/6] input: elants: read touchscreen size for EKTF3624
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 5/6] input: elants: refactor elants_i2c_execute_command()
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH 0/6] input: elants: Support Asus TF300T touchscreen
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hid_field_extract
  • From: syzbot <syzbot+09ef48aa58261464b621@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] Input: add zinitix touchscreen driver
  • From: michael.srba@xxxxxxxxx
• [PATCH v3 2/2] dt-bindings: input/touchscreen: add bindings for zinitix
  • From: michael.srba@xxxxxxxxx
• Re: [PATCH] HID: core: Adjust indentation in hid_add_device
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] HID: core: Adjust indentation in hid_add_device
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH] Input: uinput - always report EPOLLOUT
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hid_field_extract
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RMI4 for Thinkpad X1 Extreme Gen 2 / P1 Gen 2
  • From: "Jason A. Donenfeld" <Jason@xxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hid_field_extract
  • From: syzbot <syzbot+09ef48aa58261464b621@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hid_field_extract
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: INFO: rcu detected stall in hub_event
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [git pull] Input updates for v5.5-rc0
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [Intel-gfx] [PATCH v3 09/12] HID: picoLCD: constify fb ops
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] HID: multitouch: Add LG MELF0410 I2C touchscreen support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] hidraw: Fix returning EPOLLOUT from hidraw_poll
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH 3/3] Input: elan_i2c - Get the device information from PS/2 interface
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 2/3] Input: elan_i2c - Do no operation for elan_smbus_sleep_control function
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 1/3] Input: elan_i2c - Do no operation for elan_smbus_set_mode function
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• KASAN: slab-out-of-bounds Write in hidinput_setkeycode
  • From: syzbot <syzbot+aed9115d05783f14777a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Query regarding hid-multitouch.c driver in 4.14/4.19
  • From: Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx>
• [PATCH 6/6] Input: elantech - Add the flag which will also use host notify
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 5/6] Input: elantech - Transfer the device information from PS/2 to SMBus
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 4/6] Input: elantech - High resolution report for new pattern 2
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 3/6] Input: elantech - Increace and correct device information for pattern 0,1,2
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH 2/6] Input: elantech - Add the function to get more bytes from register
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• [PATCH] Input: elantech - Add pattern for firmware into elantech_device_info structure
  • From: Dave Wang <dave.wang@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [git pull] Input updates for v5.5-rc0
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [git pull] Input updates for v5.5-rc0
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] HID: picoLCD: constify fb ops
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH] Input: add safety guards to input_set_keycode()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2] HID: hid-input: clear unmapped usages
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: Fix memory leak in psxpad_spi_probe
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/6] Input: elantech - Add the pattern for firmware into elantech_device_info structure
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: goodix - Add upside-down quirk for Teclast X89 tablet
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [git pull] Input updates for v5.5-rc0
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 24/25] Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• KASAN: slab-out-of-bounds Read in hid_field_extract
  • From: syzbot <syzbot+09ef48aa58261464b621@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>