Re: [PATCH 1/1] HID: mcp2221: add GPIO functionality support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 14, 2020 at 6:48 PM Rishi Gupta <gupt21@xxxxxxxxx> wrote:

> MCP2221 has 4 pins that can be used as GPIO or configured
> for alternate functionality such as clock generation and
> IRQ detection. This patch adds support for GPIO functionality.
>
> To set direction of a pin or to toggle its state after it
> has been configured as GPIO, driver sends command to mcp2221
> and parses response received from mcp2221. Based on this
> response either 0 or appropriate error code is returned to
> GPIO framework.
>
> To get the direction or current state of a pin, driver
> sends command and read response from the device. Based on
> the response received from device direction or value
> is sent to the GPIO framework.
>
> Command from driver to mcp2221 device are output report.
> Response received from mcp2221 is input report.
>
> Datasheet (page 45-48) contains details about how to decode
> the response received from device:
> http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf
>
> Signed-off-by: Rishi Gupta <gupt21@xxxxxxxxx>

This looks good to me.
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux