Linux Bluetooth Wireless

• Date Index

• Re: Setting a static pin to allow pairing, (continued)
  • Re: Setting a static pin to allow pairing, Luiz Augusto von Dentz
    • Re: Setting a static pin to allow pairing, Bastien Nocera
  • Re: Setting a static pin to allow pairing, Luiz Augusto von Dentz
    • Re: Setting a static pin to allow pairing, Roy Sigurd Karlsbakk
      • Re: Setting a static pin to allow pairing, Luiz Augusto von Dentz
        • Re: Setting a static pin to allow pairing, Roy Sigurd Karlsbakk
• pull request: bluetooth-next 2017-12-18, Johan Hedberg
  • Re: pull request: bluetooth-next 2017-12-18, David Miller
• [PATCH V4 0/9] mesh: Add configuration commands to meshctl, sbrown
  • [PATCH V4 1/9] mesh: meshctl: Change command names to <cmd>-<get/set>, sbrown
  • [PATCH V4 3/9] mesh: meshctl: Add set heartbeat publish, sbrown
  • [PATCH V4 2/9] mesh: meshctl: Add add/get subscribe, sbrown
  • [PATCH V4 6/9] mesh: meshctl: Add set/get proxy, sbrown
  • [PATCH V4 4/9] mesh: meshctl: Add get app keys, sbrown
  • [PATCH V4 5/9] mesh: meshctl: Add get publish, sbrown
  • [PATCH V4 9/9] mesh: meshctl: Add Company ID parameter to pub-set and pub-get, sbrown
  • [PATCH V4 7/9] mesh: meshctl: Add get/set identity, sbrown
  • [PATCH V4 8/9] mesh: meshctl: Add get/set relay, sbrown
  • Re: [PATCH V4 0/9] mesh: Add configuration commands to meshctl, Johan Hedberg
• [PATCH v2 1/4] client: Group discovery filter variables into a struct, Luiz Augusto von Dentz
  • [PATCH v2 2/4] client: Make scan:clear clear individual fields, Luiz Augusto von Dentz
  • [PATCH v2 3/4] client: Add generator for scan:clear, Luiz Augusto von Dentz
  • [PATCH v2 4/4] clien: Only set the discovery filter when necessary, Luiz Augusto von Dentz
  • Re: [PATCH v2 1/4] client: Group discovery filter variables into a struct, Johan Hedberg
• [RFC] mesh: meshctl: Fix duplicate modelId's in json database, Steve Brown
• [PATCH BlueZ 1/3] client: Group discovery filter variables into a struct, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/3] client: Make scan:clear clear individual fields, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/3] clien: Only set the discovery filter when necessary, Luiz Augusto von Dentz
• [PATCH V3 0/9] mesh: Add configuration commands to meshctl, sbrown
  • [PATCH V3 1/9] mesh: meshctl: Change command names to <cmd>-<get/set>, sbrown
  • [PATCH V3 2/9] mesh: meshctl: Add add/get subscribe, sbrown
  • [PATCH V3 4/9] mesh: meshctl: Add get app keys, sbrown
  • [PATCH V3 3/9] mesh: meshctl: Add set heartbeat publish, sbrown
    • Re: [PATCH V3 3/9] mesh: meshctl: Add set heartbeat publish, Stotland, Inga
      • Re: [PATCH V3 3/9] mesh: meshctl: Add set heartbeat publish, Steve Brown
  • [PATCH V3 6/9] mesh: meshctl: Add set/get proxy, sbrown
  • [PATCH V3 5/9] mesh: meshctl: Add get publish, sbrown
  • [PATCH V3 7/9] mesh: meshctl: Add get/set identity, sbrown
    • Re: [PATCH V3 7/9] mesh: meshctl: Add get/set identity, Johan Hedberg
      • Re: [PATCH V3 7/9] mesh: meshctl: Add get/set identity, Steve Brown
  • [PATCH V3 8/9] mesh: meshctl: Add get/set relay, sbrown
  • [PATCH V3 9/9] mesh: meshctl: Add Company ID parameter to pub-set and pub-get, sbrown
• meshctl: publish db entry malformed for 2d model of an element, Steve Brown
  • Re: meshctl: publish db entry malformed for 2d model of an element, Steve Brown
• [Bug 198165] New: 4.14 kernel regression - Intel 8260 Bluetooth fails after resume, bugzilla-daemon
  • [Bug 198165] 4.14 kernel regression - Intel 8260 Bluetooth fails after resume, bugzilla-daemon
  • [Bug 198165] 4.14 kernel regression - Intel 8260 Bluetooth fails after resume, bugzilla-daemon
  • [Bug 198165] 4.14 kernel regression - Intel 8260 Bluetooth fails after resume, bugzilla-daemon
• [PATCH v2 01/11] monitor: Detect string format, Luiz Augusto von Dentz
  • [PATCH v2 03/11] client: Rename set-filter-uuids to uuids, Luiz Augusto von Dentz
  • [PATCH v2 02/11] shared/shell: Fix parsing of optional parameters, Luiz Augusto von Dentz
  • [PATCH v2 04/11] client: Rename set-filter-rssi to rssi, Luiz Augusto von Dentz
  • [PATCH v2 05/11] client: Rename set-filter-pathloss to pathloss, Luiz Augusto von Dentz
  • [PATCH v2 06/11] client: Rename set-filter-transport to transport, Luiz Augusto von Dentz
  • [PATCH v2 07/11] client: Rename set-filter-duplicate-data to duplicate-data, Luiz Augusto von Dentz
  • [PATCH v2 08/11] client: Rename set-filter-clear to clear, Luiz Augusto von Dentz
  • [PATCH v2 09/11] client: Fix command scan:clear, Luiz Augusto von Dentz
  • [PATCH v2 10/11] client: Group discovery filter variables into a struct, Luiz Augusto von Dentz
    • Re: [PATCH v2 10/11] client: Group discovery filter variables into a struct, ERAMOTO Masaya
  • [PATCH v2 11/11] client: Make scan:clear clear individual fields, Luiz Augusto von Dentz
  • Re: [PATCH v2 01/11] monitor: Detect string format, Luiz Augusto von Dentz
• Profile1 close question, John Klug
  • Re: Profile1 close question, John Klug
    • Re: Profile1 close question, Szymon Janc
      • Re: Profile1 close question, Luiz Augusto von Dentz
• rfcomm - bug - sleeping in atomic context, Alban Browaeys
• [PATCH v2 1/4] Add AddressType property for Adapter1 and Device1 interfaces, Szymon Janc
  • [PATCH v2 2/4] adapter: Add support for AddressType property, Szymon Janc
  • [PATCH v2 3/4] device: Add support for AddressType property, Szymon Janc
  • [PATCH v2 4/4] client: Print Address type in show and info commands, Szymon Janc
  • Re: [PATCH v2 1/4] Add AddressType property for Adapter1 and Device1 interfaces, Szymon Janc
• [PATCH 1/4] Add AddressType property for Adapter1 and Device1 interfaces, Szymon Janc
  • [PATCH 2/4] adapter: Add support for AddressType property, Szymon Janc
  • [PATCH 3/4] device: Add support for AddressType property, Szymon Janc
    • Re: [PATCH 3/4] device: Add support for AddressType property, Marcel Holtmann
  • [PATCH 4/4] client: Print Address type in show and info commands, Szymon Janc
• [PATCH] client: Fix printing of array properties, Szymon Janc
  • Re: [PATCH] client: Fix printing of array properties, Szymon Janc
• [v5 0/8] rsi: add bluetooth and coex support, Amitkumar Karwar
  • [v5 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
    • Re: [v5 1/8] rsi: add rx control block to handle rx packets in USB, Kalle Valo
      • Re: [v5 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
  • [v5 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
  • [v5 3/8] rsi: add header file rsi_header, Amitkumar Karwar
    • Re: [v5 3/8] rsi: add header file rsi_header, Kalle Valo
      • Re: [v5 3/8] rsi: add header file rsi_header, Amitkumar Karwar
  • [v5 4/8] rsi: add coex support, Amitkumar Karwar
    • Re: [v5 4/8] rsi: add coex support, Kalle Valo
      • Re: [v5 4/8] rsi: add coex support, Amitkumar Karwar
        • Re: [v5 4/8] rsi: add coex support, Kalle Valo
          • Re: [v5 4/8] rsi: add coex support, Amitkumar Karwar
    • Re: [v5 4/8] rsi: add coex support, Kalle Valo
      • Re: [v5 4/8] rsi: add coex support, Amitkumar Karwar
  • [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
    • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
      • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
        • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
      • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Kalle Valo
        • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
          • Re: [v5 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Kalle Valo
  • [v5 6/8] rsi: handle BT traffic in driver, Amitkumar Karwar
    • Re: [v5 6/8] rsi: handle BT traffic in driver, Kalle Valo
  • [v5 7/8] rsi: add module parameter operating mode, Amitkumar Karwar
    • Re: [v5 7/8] rsi: add module parameter operating mode, Kalle Valo
      • Re: [v5 7/8] rsi: add module parameter operating mode, Marcel Holtmann
        • Re: [v5 7/8] rsi: add module parameter operating mode, Kalle Valo
  • [v5 8/8] rsi: sdio changes to support BT, Amitkumar Karwar
• [PATCH BlueZ 1/9] monitor: Detect string format, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/9] shared/shell: Fix parsing of optional parameters, Luiz Augusto von Dentz
  • [PATCH BlueZ 4/9] client: Rename set-filter-rssi to rssi, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/9] client: Rename set-filter-uuids to uuids, Luiz Augusto von Dentz
  • [PATCH BlueZ 5/9] client: Rename set-filter-pathloss to pathloss, Luiz Augusto von Dentz
  • [PATCH BlueZ 7/9] client: Rename set-filter-duplicate-data to duplicate-data, Luiz Augusto von Dentz
  • [PATCH BlueZ 6/9] client: Rename set-filter-transport to transport, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 6/9] client: Rename set-filter-transport to transport, ERAMOTO Masaya
      • Re: [PATCH BlueZ 6/9] client: Rename set-filter-transport to transport, Luiz Augusto von Dentz
  • [PATCH BlueZ 8/9] client: Rename set-filter-clear to clear, Luiz Augusto von Dentz
  • [PATCH BlueZ 9/9] client: Fix command scan:clear, Luiz Augusto von Dentz
• [PATCH] bluecard: Fix a possible sleep-in-atomic bug in bluecard_write_wakeup, Jia-Ju Bai
  • Re: [PATCH] bluecard: Fix a possible sleep-in-atomic bug in bluecard_write_wakeup, Marcel Holtmann
• [PATCH 0/2] Bluetooth: Add device tree compatible for TI CC2560, David Lechner
  • [PATCH 2/2] Bluetooth: hci_ll: add "ti,cc2560" compatible string, David Lechner
  • [PATCH 1/2] dt-bindings: net: add TI CC2560 Bluetooth chip, David Lechner
    • Re: [PATCH 1/2] dt-bindings: net: add TI CC2560 Bluetooth chip, Rob Herring
  • Re: [PATCH 0/2] Bluetooth: Add device tree compatible for TI CC2560, Marcel Holtmann
• [PATCH v4] Bluetooth: hci_ll: Get BD address from NVMEM, David Lechner
  • [PATCH v4] Bluetooth: hci_ll: Add optional nvmem BD address source, David Lechner
    • Re: [PATCH v4] Bluetooth: hci_ll: Add optional nvmem BD address source, Marcel Holtmann
• [PATCH v3 0/3] Bluetooth: hci_ll: Get BD address from NVMEM, David Lechner
  • [PATCH] Bluetooth: hci_ll: Add optional nvmem BD address source, David Lechner
  • [PATCH v3 1/3] Bluetooth: hci_ll: add support for setting public address, David Lechner
  • [PATCH v3 2/3] dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st, David Lechner
  • Re: [PATCH v3 0/3] Bluetooth: hci_ll: Get BD address from NVMEM, Marcel Holtmann
• [PATCH] obexd: use AM_LDFLAGS for linking, stefan . seyfried
  • [PATCH] obexd: use AM_LDFLAGS for linking, Stefan Seyfried
• Fwd: Consistent enumeration of a btattached controller, Alan Martinovic
  • Re: Consistent enumeration of a btattached controller, Marcel Holtmann
• [PATCH V2 0/8] mesh: Add configuration commands to meshctl, sbrown
  • [PATCH V2 6/8] mesh: meshctl: Add set/get proxy command, sbrown
  • [PATCH V2 8/8] mesh: meshctl: Add get/set relay command, sbrown
  • [PATCH V2 7/8] mesh: meshctl: Add get/set identity, sbrown
  • [PATCH V2 5/8] mesh: meshctl: Add get publish command, sbrown
  • [PATCH V2 4/8] mesh: meshctl: Add get app keys command, sbrown
  • [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>, sbrown
    • Re: [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>, Stotland, Inga
      • Re: [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>, Steve Brown
        • Re: [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>, Stotland, Inga
          • Re: [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>, Steve Brown
  • [PATCH V2 3/8] mesh: meshctl: Add set heartbeat command, sbrown
    • Re: [PATCH V2 3/8] mesh: meshctl: Add set heartbeat command, Stotland, Inga
  • [PATCH V2 2/8] mesh: meshctl: Add add/get Subscribe, sbrown
  • Re: [PATCH V2 0/8] mesh: Add configuration commands to meshctl, Luiz Augusto von Dentz
• [PATCH v2 1/3] shared/shell: Add submenu description, Luiz Augusto von Dentz
  • [PATCH v2 2/3] client: Add description for submenus, Luiz Augusto von Dentz
  • [PATCH v2 3/3] mesh: Add description for submenus, Luiz Augusto von Dentz
  • Re: [PATCH v2 1/3] shared/shell: Add submenu description, Luiz Augusto von Dentz
• [PATCH BlueZ 1/3] shared/shell: Add submenu description, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/3] client: Add description for submenus, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/3] client: Add description for submenus, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 3/3] client: Add description for submenus, Johan Hedberg
• RFCOMM server and current Bluez, John Klug
  • Re: RFCOMM server and current Bluez, Marcel Holtmann
• [PATCH] Bluetooth: Remove redundant disable_advertising(), Jaganath Kanakkassery
  • Re: [PATCH] Bluetooth: Remove redundant disable_advertising(), Marcel Holtmann
• [PATCH 0/3] mesh: Add configuration commands to meshctl, sbrown
  • [PATCH 2/3] mesh: meshctl: Add commands, sbrown
    • Re: [PATCH 2/3] mesh: meshctl: Add commands, Luiz Augusto von Dentz
      • Re: [PATCH 2/3] mesh: meshctl: Add commands, Steve Brown
        • Re: [PATCH 2/3] mesh: meshctl: Add commands, Luiz Augusto von Dentz
          • Re: [PATCH 2/3] mesh: meshctl: Add commands, Steve Brown
      • Re: [PATCH 2/3] mesh: meshctl: Add commands, Steve Brown
  • [PATCH 1/3] mesh: Segmentation fails in gatt.c:pipe_write(), sbrown
    • Re: [PATCH 1/3] mesh: Segmentation fails in gatt.c:pipe_write(), Luiz Augusto von Dentz
  • [PATCH 3/3] mesh: meshctl: Add support for subscriptions in node and database, sbrown
• [PATCH BlueZ] shell: Add exists callback, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] shell: Add exists callback, Luiz Augusto von Dentz
• [RFC 1/4] Add LEAddressType property for Adapter1 and Device1 interfaces, Szymon Janc
  • [RFC 2/4] adapter: Add support for LEAddressType property, Szymon Janc
  • [RFC 3/4] device: Add support for LEAddressType property, Szymon Janc
  • [RFC 4/4] client: Print LEAddress type in show and info commands, Szymon Janc
    • Re: [RFC 4/4] client: Print LEAddress type in show and info commands, Luiz Augusto von Dentz
      • Re: [RFC 4/4] client: Print LEAddress type in show and info commands, Szymon Janc
        • Re: [RFC 4/4] client: Print LEAddress type in show and info commands, Marcel Holtmann
  • Re: [RFC 1/4] Add LEAddressType property for Adapter1 and Device1 interfaces, Luiz Augusto von Dentz
    • Re: [RFC 1/4] Add LEAddressType property for Adapter1 and Device1 interfaces, Szymon Janc
  • Re: [RFC 1/4] Add LEAddressType property for Adapter1 and Device1 interfaces, Marcel Holtmann
• [PATCH v1] Bluetooth: Utilize %*ph specifier, Andy Shevchenko
  • Re: [PATCH v1] Bluetooth: Utilize %*ph specifier, Marcel Holtmann
• raspberry bluez ble.Question?, liyj1
  • Re: raspberry bluez ble.Question?, Steve Brown
• [PATCH BlueZ 1/4] shared/shell: Fix hidden default menu if no submenu, ERAMOTO Masaya
  • [PATCH BlueZ 2/4] toosl/bluetooth-player: Remove extra commands, ERAMOTO Masaya
  • [PATCH BlueZ 3/4] shared/shell: Create command_isskipped(), ERAMOTO Masaya
  • [PATCH BlueZ 4/4] shared/shell: Fix auto-completion of invalid commands, ERAMOTO Masaya
  • Re: [PATCH BlueZ 1/4] shared/shell: Fix hidden default menu if no submenu, Luiz Augusto von Dentz
• [PATCH v2] mesh: Fix crash while reading input parameters, Luiz Augusto von Dentz
  • Re: [PATCH v2] mesh: Fix crash while reading input parameters, Steve Brown
  • Re: [PATCH v2] mesh: Fix crash while reading input parameters, Johan Hedberg
• [PATCH BlueZ] mesh: Fix crash while reading input parameters, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] mesh: Fix crash while reading input parameters, Steve Brown
• [PATCH V2 10/10] tools/btpclient: Add support for reseting adapter, Szymon Janc
• BlueZ meshctl segv in config-client.c:read_input_parameters(), Steve Brown
  • Re: BlueZ meshctl segv in config-client.c:read_input_parameters(), Luiz Augusto von Dentz
• [PATCH V2 00/10] Initial code for BTP client, Szymon Janc
  • [PATCH V2 01/10] shared/btp: Add initial code for library, Szymon Janc
  • [PATCH V2 02/10] tools/btpclient: Add initial code, Szymon Janc
  • [PATCH V2 03/10] shared/btp: Add definitions for GAP service, Szymon Janc
  • [PATCH V2 05/10] tools/btpclient: Add initial support for read controller info command, Szymon Janc
  • [PATCH V2 04/10] tools/btpclient: Add initial support for GAP service, Szymon Janc
  • [PATCH V2 07/10] tools/btpclient: Add support for tracking mutable adapter settings, Szymon Janc
  • [PATCH V2 06/10] tools/btpclient: Get initial values for adapter setttings, Szymon Janc
  • [PATCH V2 09/10] tools/btpclient: Store devices per adapter, Szymon Janc
  • [PATCH V2 08/10] tools/btpclient: Add support for configuring adapter settings, Szymon Janc
  • Re: [PATCH V2 00/10] Initial code for BTP client, Szymon Janc
• [PATCH] Bluetooth: Add support to advertise when connected, Łukasz Rymanowski
  • Re: [PATCH] Bluetooth: Add support to advertise when connected, Łukasz Rymanowski
  • Re: [PATCH] Bluetooth: Add support to advertise when connected, Marcel Holtmann
    • Re: [PATCH] Bluetooth: Add support to advertise when connected, Łukasz Rymanowski
• [PATCH v2 01/10] shared/shell: Omit menu command if there are no submenus, Luiz Augusto von Dentz
  • [PATCH v2 02/10] shared/shell: Don't remove command from arguments, Luiz Augusto von Dentz
  • [PATCH v2 03/10] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH v2 04/10] tools/obexctl: Use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH v2 06/10] tools/bluetooth-player: Fix arg format for search command, Luiz Augusto von Dentz
  • [PATCH v2 05/10] tools/bluetooth-player: Use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH v2 08/10] shell: Add bt_shell_opt, Luiz Augusto von Dentz
  • [PATCH v2 07/10] client: Fix arguments of set-filter-clear, Luiz Augusto von Dentz
  • [PATCH v2 10/10] mesh: Remove cmd_scan, Luiz Augusto von Dentz
  • [PATCH v2 09/10] mesh: Rework set_scan_filter_uuids parameters, Luiz Augusto von Dentz
  • Re: [PATCH v2 01/10] shared/shell: Omit menu command if there are no submenus, Johan Hedberg
• [PATCH v2 0/3] Bluetooth: hci_ll: Get BD address from NVMEM (was "bluetooth: hci_ll: Get MAC address from NVMEM"), David Lechner
  • [PATCH v2 1/3] Bluetooth: hci_ll: add support for setting public address, David Lechner
    • Re: [PATCH v2 1/3] Bluetooth: hci_ll: add support for setting public address, Marcel Holtmann
      • Re: [PATCH v2 1/3] Bluetooth: hci_ll: add support for setting public address, David Lechner
        • Re: [PATCH v2 1/3] Bluetooth: hci_ll: add support for setting public address, Marcel Holtmann
  • [PATCH v2 3/3] Bluetooth: hci_ll: Add optional nvmem BD address source, David Lechner
    • Re: [PATCH v2 3/3] Bluetooth: hci_ll: Add optional nvmem BD address source, Marcel Holtmann
  • [PATCH v2 2/3] dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st, David Lechner
    • Re: [PATCH v2 2/3] dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st, Marcel Holtmann
    • Re: [PATCH v2 2/3] dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st, Rob Herring
• [PATCH] Bluetooth: hci_ll: Add endianness conversion when setting baudrate, David Lechner
  • Re: [PATCH] Bluetooth: hci_ll: Add endianness conversion when setting baudrate, Marcel Holtmann
• LE Create Connection always triggers LE Read Remote Used Features, Alan Martinovic
  • Re: LE Create Connection always triggers LE Read Remote Used Features, Alan Martinovic
• [PATCH 0/9] Initial code for BTP client, Szymon Janc
  • [PATCH 3/9] shared/btp: Add definitions for GAP service, Szymon Janc
  • [PATCH 1/9] shared/btp: Add initial code for library, Szymon Janc
  • [PATCH 2/9] tools/btpclient: Add initial code, Szymon Janc
  • [PATCH 4/9] tools/btpclient: Store index along with adapter proxy, Szymon Janc
    • Re: [PATCH 4/9] tools/btpclient: Store index along with adapter proxy, Luiz Augusto von Dentz
      • Re: [PATCH 4/9] tools/btpclient: Store index along with adapter proxy, Szymon Janc
  • [PATCH 6/9] tools/btpclient: Add initial support for read controller info command, Szymon Janc
  • [PATCH 8/9] tools/btpclient: Add support for tracking mutable adapter settings, Szymon Janc
  • [PATCH 7/9] tools/btpclient: Get initial values for adapter setttings, Szymon Janc
  • [PATCH 9/9] tools/btpclient: Add support for configuring adapter settings, Szymon Janc
  • [PATCH 5/9] tools/btpclient: Add initial support for GAP service, Szymon Janc
• [PATCH BlueZ 1/7] shared/shell: Omit menu command if there are no submenus, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/7] shared/shell: Don't remove command from arguments, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/7] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 3/7] mesh: Make meshctl use bt_shell helpers, Johan Hedberg
      • Re: [PATCH BlueZ 3/7] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH BlueZ 4/7] tools/obexctl: Use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH BlueZ 5/7] tools/bluetooth-player: Use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH BlueZ 7/7] client: Fix arguments of set-filter-clear, Luiz Augusto von Dentz
  • [PATCH BlueZ 6/7] tools/bluetooth-player: Fix arg format for search command, Luiz Augusto von Dentz
• [Bug 198099] New: Bluetooth crash in dmesg when switching wifi network from 5Ghz to 2.4Ghz on intel 8265, bugzilla-daemon
  • [Bug 198099] Bluetooth crash in dmesg when switching wifi network from 5Ghz to 2.4Ghz on intel 8265, bugzilla-daemon
  • [Bug 198099] Bluetooth crash in dmesg when switching wifi network from 5Ghz to 2.4Ghz on intel 8265, bugzilla-daemon
• [v4 0/8] rsi: add bluetooth and coex support, Amitkumar Karwar
  • [v4 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
  • [v4 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
  • [v4 3/8] rsi: add header file rsi_header, Amitkumar Karwar
  • [v4 4/8] rsi: add coex support, Amitkumar Karwar
  • [v4 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
    • Re: [v4 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
      • Re: [v4 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
        • Re: [v4 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
          • Re: [v4 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Kalle Valo
  • [v4 7/8] rsi: add module parameter operating mode, Amitkumar Karwar
  • [v4 8/8] rsi: sdio changes to support BT, Amitkumar Karwar
  • [v4 6/8] rsi: handle BT traffic in driver, Amitkumar Karwar
• [PATCH BlueZ 1/4] shared/shell: Omit menu command if there are no submenus, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/4] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/4] tools/obexctl: Use bt_shell helpers, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 3/4] tools/obexctl: Use bt_shell helpers, ERAMOTO Masaya
      • Re: [PATCH BlueZ 3/4] tools/obexctl: Use bt_shell helpers, Johan Hedberg
        • Re: [PATCH BlueZ 3/4] tools/obexctl: Use bt_shell helpers, Luiz Augusto von Dentz
  • [PATCH BlueZ 4/4] tools/bluetooth-player: Use bt_shell helpers, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 4/4] tools/bluetooth-player: Use bt_shell helpers, ERAMOTO Masaya
• Re: [PATCH 1/4] linux-firmware: Add firmware file for Intel Bluetooth 9560, Josh Boyer
  • Re: [PATCH 1/4] linux-firmware: Add firmware file for Intel Bluetooth 9560, Josh Boyer
    • Re: [PATCH 1/4] linux-firmware: Add firmware file for Intel Bluetooth 9560, Kyle McMartin
      • Re: [PATCH 1/4] linux-firmware: Add firmware file for Intel Bluetooth 9560, Kyle McMartin
• Change controller role with non deprecated commands, Alan Martinovic
• [PATCH v3] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • Re: [PATCH v3] mesh: Make meshctl use bt_shell helpers, Johan Hedberg
• [PATCH BlueZ] shared/shell: Fix no version output with option, ERAMOTO Masaya
  • Re: [PATCH BlueZ] shared/shell: Fix no version output with option, Luiz Augusto von Dentz
• [PATCH v2] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • Re: [PATCH v2] mesh: Make meshctl use bt_shell helpers, Johan Hedberg
    • Re: [PATCH v2] mesh: Make meshctl use bt_shell helpers, Johan Hedberg
  • Re: [PATCH v2] mesh: Make meshctl use bt_shell helpers, ERAMOTO Masaya
• [PATCH BlueZ] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] mesh: Make meshctl use bt_shell helpers, Johan Hedberg
    • Re: [PATCH BlueZ] mesh: Make meshctl use bt_shell helpers, Luiz Augusto von Dentz
• [PATCH BlueZ]mesh: meshctl add Node Identity option to connect command, Steve Brown
  • Re: [PATCH BlueZ]mesh: meshctl add Node Identity option to connect command, Stotland, Inga
  • Re: [PATCH BlueZ]mesh: meshctl add Node Identity option to connect command, Johan Hedberg
• [PATCH BlueZ 1/3] gatt: Make database_add_record detect the UUID, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/3] gatt: Use monitor code to decode service name, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/3] gatt: Add all services as records, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ 1/3] gatt: Make database_add_record detect the UUID, Luiz Augusto von Dentz
• [RFC 0/9] Extended Adv, Jaganath Kanakkassery
  • [RFC 1/9] Bluetooth: Read no of adv sets during init, Jaganath Kanakkassery
    • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Luiz Augusto von Dentz
      • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Jaganath K
        • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Luiz Augusto von Dentz
          • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Jaganath K
      • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Marcel Holtmann
        • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Jaganath K
          • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Marcel Holtmann
            • Re: [RFC 1/9] Bluetooth: Read no of adv sets during init, Jaganath K
  • [RFC 2/9] Bluetooth: Impmlement extended adv enable, Jaganath Kanakkassery
  • [RFC 3/9] Bluetooth: Use Set ext adv/scan rsp data if controller supports, Jaganath Kanakkassery
    • Re: [RFC 3/9] Bluetooth: Use Set ext adv/scan rsp data if controller supports, Marcel Holtmann
      • Re: [RFC 3/9] Bluetooth: Use Set ext adv/scan rsp data if controller supports, Jaganath K
  • [RFC 4/9] Bluetooth: Implement disable and removal of adv instance, Jaganath Kanakkassery
  • [RFC 5/9] Bluetooth: Process Adv-Set Terminate event, Jaganath Kanakkassery
    • Re: [RFC 5/9] Bluetooth: Process Adv-Set Terminate event, Marcel Holtmann
  • [RFC 6/9] Bluetooth: Use ext adv for directed adv, Jaganath Kanakkassery
    • Re: [RFC 6/9] Bluetooth: Use ext adv for directed adv, Marcel Holtmann
  • [RFC 7/9] Bluetooth: Implement Set ADV set random address, Jaganath Kanakkassery
  • [RFC 8/9] Bluetooth: Handle incoming connection to an adv set, Jaganath Kanakkassery
  • [RFC 9/9] Bluetooth: Implement secondary advertising on different PHYs, Jaganath Kanakkassery
    • Re: [RFC 9/9] Bluetooth: Implement secondary advertising on different PHYs, Marcel Holtmann
• [PATCH 0/3] bluetooth: hci_ll: Get MAC address from NVMEM, David Lechner
  • [PATCH 2/3] bluetooth: hci_ll: add constant for vendor-specific command, David Lechner
    • Re: [PATCH 2/3] bluetooth: hci_ll: add constant for vendor-specific command, Marcel Holtmann
      • Re: [PATCH 2/3] bluetooth: hci_ll: add constant for vendor-specific command, David Lechner
        • Re: [PATCH 2/3] bluetooth: hci_ll: add constant for vendor-specific command, Marcel Holtmann
  • [PATCH 1/3] dt-bindings: Add optional nvmem MAC address bindings to ti,wlink-st, David Lechner
    • Re: [PATCH 1/3] dt-bindings: Add optional nvmem MAC address bindings to ti,wlink-st, Marcel Holtmann
    • Re: [PATCH 1/3] dt-bindings: Add optional nvmem MAC address bindings to ti,wlink-st, Sergei Shtylyov
      • Re: [PATCH 1/3] dt-bindings: Add optional nvmem MAC address bindings to ti,wlink-st, Sergei Shtylyov
  • [PATCH 3/3] bluetooth: hci_ll: Add optional nvmem MAC address source, David Lechner
    • Re: [PATCH 3/3] bluetooth: hci_ll: Add optional nvmem MAC address source, Marcel Holtmann
• meshctl: Can't connect via Node Identity advertisement, Steve Brown
  • Re: meshctl: Can't connect via Node Identity advertisement, Johan Hedberg
    • Re: meshctl: Can't connect via Node Identity advertisement, Steve Brown
    • Re: meshctl: Can't connect via Node Identity advertisement, Steve Brown
      • Re: meshctl: Can't connect via Node Identity advertisement, Johan Hedberg
        • Re: meshctl: Can't connect via Node Identity advertisement, Steve Brown
• [PATCH] bluetooth: serdev: hci_ll: Wait for CTS instead of using msleep, David Lechner
  • Re: [PATCH] bluetooth: serdev: hci_ll: Wait for CTS instead of using msleep, Marcel Holtmann
• [PATCH] bluetooth: hci_ll: remove \n from kernel messages, David Lechner
  • Re: [PATCH] bluetooth: hci_ll: remove \n from kernel messages, Marcel Holtmann
• BlueZ Help, Kevin Snow
  • Re: BlueZ Help, Luiz Augusto von Dentz
• [v3 0/8] rsi: add bluetooth and coex support, Amitkumar Karwar
  • [v3 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
  • [v3 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
  • [v3 3/8] rsi: add header file rsi_header, Amitkumar Karwar
  • [v3 4/8] rsi: add coex support, Amitkumar Karwar
  • [v3 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
    • Re: [v3 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
      • Re: [v3 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
  • [v3 6/8] rsi: handle BT traffic in driver, Amitkumar Karwar
  • [v3 7/8] rsi: add module parameter operating mode, Amitkumar Karwar
  • [v3 8/8] rsi: sdio changes to support BT, Amitkumar Karwar
• [PATCH BlueZ] Fix parsing composition data for custom models, Michal Hobot
  • Re: [PATCH BlueZ] Fix parsing composition data for custom models, Johan Hedberg
• [Bug 198043] New: Bluetooth mgmt api set powered causes kernel race condition, bugzilla-daemon
  • [Bug 198043] Bluetooth mgmt api set powered causes kernel race condition, bugzilla-daemon
  • [Bug 198043] Bluetooth mgmt api set powered causes kernel race condition, bugzilla-daemon
  • [Bug 198043] Bluetooth mgmt api set powered causes kernel race condition, bugzilla-daemon
• [Bug 198037] New: Bluetooth headset is rendered unusable on account of massive stuttering after playing music for a while with Intel 3160, bugzilla-daemon
  • [Bug 198037] Bluetooth headset is rendered unusable on account of massive stuttering after playing music for a while with Intel 3160, bugzilla-daemon
  • [Bug 198037] iwlwifi: 3160: WiFi BT Coex problem - A2DP, bugzilla-daemon
  • [Bug 198037] BT: 3160: WiFi BT Coex problem - A2DP, bugzilla-daemon
• [PATCH] Bluetooth: btsdio: Do not bind to non-removable BCM43341, Hans de Goede
  • Re: [PATCH] Bluetooth: btsdio: Do not bind to non-removable BCM43341, Marcel Holtmann
• How connect two headphones to one Bluetooth adapter., ruslan.kuzmin@xxxxxxx
• [v2 0/8] rsi: add bluetooth and coex support, Amitkumar Karwar
  • [v2 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
  • [v2 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
  • [v2 3/8] rsi: add header file rsi_header, Amitkumar Karwar
  • [v2 4/8] rsi: add coex support, Amitkumar Karwar
  • [v2 6/8] rsi: handle BT traffic in driver, Amitkumar Karwar
  • [v2 7/8] rsi: add module parameter operating mode, Amitkumar Karwar
  • [v2 8/8] rsi: sdio changes to support BT, Amitkumar Karwar
  • [v2 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
• [PATCH BlueZ] tools/obexctl: Fix display of size/time during transfer, ERAMOTO Masaya
  • Re: [PATCH BlueZ] tools/obexctl: Fix display of size/time during transfer, Luiz Augusto von Dentz
• [PATCH 0/4 v4] LE New PHYs kernel interfaces, Jaganath Kanakkassery
  • [PATCH 1/4 v4] doc/mgmt-api: Add support for Get PHY Configuration command, Jaganath Kanakkassery
    • Re: [PATCH 1/4 v4] doc/mgmt-api: Add support for Get PHY Configuration command, Luiz Augusto von Dentz
      • Re: [PATCH 1/4 v4] doc/mgmt-api: Add support for Get PHY Configuration command, Jaganath K
  • [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath Kanakkassery
    • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath K
      • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Luiz Augusto von Dentz
        • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath K
          • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Łukasz Rymanowski
            • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath K
              • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Luiz Augusto von Dentz
                • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Łukasz Rymanowski
                  • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath K
                    • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Szymon Janc
                      • Re: [PATCH 2/4 v4] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath K
  • [PATCH 3/4 v4] doc/mgmt-api: Add advertising phys support to flags, Jaganath Kanakkassery
    • Re: [PATCH 3/4 v4] doc/mgmt-api: Add advertising phys support to flags, Marcel Holtmann
  • [PATCH 4/4] doc/mgmt-api: Update Duration Parameter description of Add Advertising, Jaganath Kanakkassery
• [PATCH 0/4 v3] LE New PHYs kernel interfaces, Jaganath Kanakkassery
  • [PATCH 1/4 v3] doc/mgmt-api: Add support for Get PHY Configuration command, Jaganath Kanakkassery
  • [PATCH 3/4 v3] doc/mgmt-api: Add advertising phys support to flags, Jaganath Kanakkassery
    • Re: [PATCH 3/4 v3] doc/mgmt-api: Add advertising phys support to flags, ERAMOTO Masaya
  • [PATCH 4/4] doc/mgmt-api: Update Duration Parameter description of Add Advertising, Jaganath Kanakkassery
  • [PATCH 2/4 v3] doc/mgmt-api: Add support for Set Phy Configuration command, Jaganath Kanakkassery
• [PATCH BlueZ] client: Fix not printing device address, Luiz Augusto von Dentz
• [PATCH BlueZ] gdbus: Force service to start if proxy is created while not connected, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] gdbus: Force service to start if proxy is created while not connected, Bastien Nocera
    • Re: [PATCH BlueZ] gdbus: Force service to start if proxy is created while not connected, Luiz Augusto von Dentz
      • Re: [PATCH BlueZ] gdbus: Force service to start if proxy is created while not connected, Bastien Nocera
        • Re: [PATCH BlueZ] gdbus: Force service to start if proxy is created while not connected, Luiz Augusto von Dentz
• [PATCH] attrib/gatttool: fix possible infinite loop when reading long descriptors/characteristics, Abel, Robert (TKI-31)
• [PATCH BlueZ] obexd: Fix crash when canceling without agent, ERAMOTO Masaya
  • Re: [PATCH BlueZ] obexd: Fix crash when canceling without agent, Luiz Augusto von Dentz
• WriteValue succeeds without error when the connection breaks, Ayke van Laethem
• [PATCH BlueZ] mesh: Correct typo in config op defines, Steve Brown
  • Re: [PATCH BlueZ] mesh: Correct typo in config op defines, Johan Hedberg
• [PATCH v2 1/4] shared/shell: Detect if the arguments are properly set, Luiz Augusto von Dentz
  • [PATCH v2 4/4] shared/shell: Print usage when no argument generator is set, Luiz Augusto von Dentz
    • Re: [PATCH v2 4/4] shared/shell: Print usage when no argument generator is set, ERAMOTO Masaya
  • [PATCH v2 3/4] client: Fix format of arguments of set-service and set-manufacturer, Luiz Augusto von Dentz
  • [PATCH v2 2/4] client: Remove argument checks, Luiz Augusto von Dentz
  • Re: [PATCH v2 1/4] shared/shell: Detect if the arguments are properly set, Luiz Augusto von Dentz
• [PATCH v2 1/2] autopair: Add more common PIN codes for audio devices, Bastien Nocera
  • [PATCH v2 2/2] autopair: Add pin codes to try for gaming input devices, Bastien Nocera
  • Re: [PATCH v2 1/2] autopair: Add more common PIN codes for audio devices, Bastien Nocera
    • Re: [PATCH v2 1/2] autopair: Add more common PIN codes for audio devices, Bastien Nocera
      • Re: [PATCH v2 1/2] autopair: Add more common PIN codes for audio devices, Szymon Janc
• Bluetooth speaker (XTreme Audio Pod) not connecting, Robert Hancock
• [PATCH BlueZ 1/4] shared/shell: Detect if the arguments are properly set, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/4] client: Remove argument checks, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/4] client: Fix format of arguments of set-service and set-manufacturer, Luiz Augusto von Dentz
  • [PATCH BlueZ 4/4] shared/shell: Add default argument generator, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 4/4] shared/shell: Add default argument generator, ERAMOTO Masaya
• [Bug 197997] New: Intel 8265 bluetooth dropping connections, but works with newer firmware from Windows, bugzilla-daemon
  • [Bug 197997] Intel 8265 bluetooth dropping connections, but works with newer firmware from Windows, bugzilla-daemon
  • [Bug 197997] Intel 8265 bluetooth dropping connections, but works with newer firmware from Windows, bugzilla-daemon
  • [Bug 197997] Intel 8265 bluetooth dropping connections, but works with newer firmware from Windows, bugzilla-daemon
• [RFC V2]Mesh: meshctl configuration output fails in gatt.c:pipe_write, Steve Brown
• [PATCH BlueZ] mesh/onoff-model: Fix msec to sec conversion, Michal Hobot
  • Re: [PATCH BlueZ] mesh/onoff-model: Fix msec to sec conversion, Johan Hedberg
• [RFC]Mesh: meshctl configuration output fails in gatt.c:pipe_write, Steve Brown
  • Re: [RFC]Mesh: meshctl configuration output fails in gatt.c:pipe_write, Luiz Augusto von Dentz
    • Re: [RFC]Mesh: meshctl configuration output fails in gatt.c:pipe_write, Steve Brown
    • Re: [RFC]Mesh: meshctl configuration output fails in gatt.c:pipe_write, Steve Brown
• Read configuration from bluetooth remote control, Ilyas Keskin
• [PATCH v2 0/2] seq_file, Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE(), Andy Shevchenko
  • [PATCH v2 2/2] Bluetooth: Re-use DEFINE_SHOW_ATTRIBUTE() macro, Andy Shevchenko
  • [PATCH v2 1/2] seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro, Andy Shevchenko
    • Re: [PATCH v2 1/2] seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro, Marcel Holtmann
      • Re: [PATCH v2 1/2] seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro, Andy Shevchenko
        • Re: [PATCH v2 1/2] seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro, Andy Shevchenko
• GATT Server ReadValue offset missing, Matthias Schmidt
  • Re: GATT Server ReadValue offset missing, Luiz Augusto von Dentz
    • Re: GATT Server ReadValue offset missing, Matthias Schmidt
      • Re: GATT Server ReadValue offset missing, Luiz Augusto von Dentz
        • Re: GATT Server ReadValue offset missing, Matthias Schmidt
• [PATCH BlueZ] control: Fix invalid access, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] control: Fix invalid access, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] control: Fix invalid access, Bastien Nocera
• [PATCH v1] Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro, Andy Shevchenko
  • Re: [PATCH v1] Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro, Randy Dunlap
    • Re: [PATCH v1] Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro, Randy Dunlap
      • Re: [PATCH v1] Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro, Andy Shevchenko
  • Re: [PATCH v1] Bluetooth: introduce DEFINE_SHOW_ATTRIBUTE() macro, Marcel Holtmann
• Fwd: Bluetooth mesh, Pierre-Henri Wibaut
  • Re: Bluetooth mesh, Michal Hobot
  • <Possible follow-ups>
  • bluetooth mesh, Cinaed Simson
    • Re: bluetooth mesh, Gix, Brian
• [PATCH BlueZ] adapter: Cleanup temporary devices using private addresses, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] adapter: Cleanup temporary devices using private addresses, Luiz Augusto von Dentz
• [PATCH] Bluetooth: btqcomsmd: Fix skb double free corruption, Loic Poulain
  • Re: [PATCH] Bluetooth: btqcomsmd: Fix skb double free corruption, Marcel Holtmann
• [PATCH] audio/control: Fix invalid read on exit, Bastien Nocera
  • Re: [PATCH] audio/control: Fix invalid read on exit, Luiz Augusto von Dentz
    • Re: [PATCH] audio/control: Fix invalid read on exit, Luiz Augusto von Dentz
      • Re: [PATCH] audio/control: Fix invalid read on exit, Bastien Nocera
        • Re: [PATCH] audio/control: Fix invalid read on exit, Luiz Augusto von Dentz
• [PATCH] Bluetooth: hci_bcm: Add support for BCM2E72, Hans de Goede
  • Re: [PATCH] Bluetooth: hci_bcm: Add support for BCM2E72, Marcel Holtmann
• [PATCH BlueZ] player: Fix clearing track metadata, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] player: Fix clearing track metadata, Bastien Nocera
    • Re: [PATCH BlueZ] player: Fix clearing track metadata, Luiz Augusto von Dentz
• [PATCH BlueZ 1/3] shared/shell: Detect if the arguments are properly set, Luiz Augusto von Dentz
  • [PATCH BlueZ 3/3] client: Fix format of arguments of set-service and set-manufacturer, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/3] client: Remove argument checks, Luiz Augusto von Dentz
• mtu negotiation issues, Thomas Green
  • Re: mtu negotiation issues, Luiz Augusto von Dentz
• [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Bastien Nocera
    • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Luiz Augusto von Dentz
      • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Luiz Augusto von Dentz
        • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Bastien Nocera
          • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Luiz Augusto von Dentz
            • Re: [PATCH BlueZ] gdbus: Fix not emiting PropertiesChanged, Bastien Nocera
• [PATCH] gdbus: Fix Bluetooth LE mouse "Connected" prop not updating, Bastien Nocera
  • Re: [PATCH] gdbus: Fix Bluetooth LE mouse "Connected" prop not updating, Luiz Augusto von Dentz
• Bluetooth LE mouse staying "connected", Bastien Nocera
  • Re: Bluetooth LE mouse staying "connected", Luiz Augusto von Dentz
    • Re: Bluetooth LE mouse staying "connected", Bastien Nocera
• [PATCH BlueZ] shared/gatt-client: Check if ATT is connected before creating requests, Luiz Augusto von Dentz
  • [PATCH BlueZ] shared/shell: Detect if the arguments are properly set, Luiz Augusto von Dentz
• [PATCH BlueZ] shared/shell: Fix command completion without character, ERAMOTO Masaya
  • Re: [PATCH BlueZ] shared/shell: Fix command completion without character, Luiz Augusto von Dentz
• [PATCH BlueZ] mesh: validate configuration target, Inga Stotland
  • Re: [PATCH BlueZ] mesh: validate configuration target, Luiz Augusto von Dentz
• Failing to receive Serial Port Profile DBus method callbacks., Austin Riffle
• meshctl cannot parse its own config file, Michał Hobot
  • Re: meshctl cannot parse its own config file, Stotland, Inga
    • Re: meshctl cannot parse its own config file, Michał Hobot
      • Re: meshctl cannot parse its own config file, Stotland, Inga
        • Re: meshctl cannot parse its own config file, Johan Hedberg
• Gdbus method reply cb not called for sleepy devices, Anitha Chandrasekar
• [PATCH BlueZ 1/2] doc/device-api: Document behavior of Disconnect method with LE, Luiz Augusto von Dentz
  • [PATCH BlueZ 2/2] device: Don't disable auto-connect for trusted devices, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ 2/2] device: Don't disable auto-connect for trusted devices, Bastien Nocera
  • Re: [PATCH BlueZ 1/2] doc/device-api: Document behavior of Disconnect method with LE, Luiz Augusto von Dentz
• Facing issue with Bluez read API, Anitha Chandrasekar
  • Re: Facing issue with Bluez read API, Luiz Augusto von Dentz
    • RE: Facing issue with Bluez read API, Anitha Chandrasekar
      • RE: Facing issue with Bluez read API, Anitha Chandrasekar
        • RE: Facing issue with Bluez read API, Anitha Chandrasekar
• [PATCH v3 0/4] Quirks cleanup and hid-generic niceness, Benjamin Tissoires
  • [PATCH v3 4/4] HID: core: remove the absolute need of hid_have_special_driver[], Benjamin Tissoires
  • [PATCH v3 3/4] HID: core: move the list of ignored devices in hid-quirks.c, Benjamin Tissoires
  • [PATCH v3 1/4] HID: core: move the dynamic quirks handling in core, Benjamin Tissoires
  • [PATCH v3 2/4] HID: quirks: move the list of special devices into a quirk, Benjamin Tissoires
  • Re: [PATCH v3 0/4] Quirks cleanup and hid-generic niceness, Jiri Kosina
• [PATCH 0/3 v2] LE New PHYs kernel interfaces, Jaganath Kanakkassery
  • [PATCH 1/3 v2] doc/mgmt-api: Add support for Get PHY information command, Jaganath Kanakkassery
    • Re: [PATCH 1/3 v2] doc/mgmt-api: Add support for Get PHY information command, Johan Hedberg
      • Re: [PATCH 1/3 v2] doc/mgmt-api: Add support for Get PHY information command, Jaganath K
    • Re: [PATCH 1/3 v2] doc/mgmt-api: Add support for Get PHY information command, Marcel Holtmann
  • [PATCH 2/3 v2] doc/mgmt-api: Add support for Set default Phy command, Jaganath Kanakkassery
    • Re: [PATCH 2/3 v2] doc/mgmt-api: Add support for Set default Phy command, Marcel Holtmann
      • Re: [PATCH 2/3 v2] doc/mgmt-api: Add support for Set default Phy command, Jaganath K
        • Re: [PATCH 2/3 v2] doc/mgmt-api: Add support for Set default Phy command, Marcel Holtmann
  • [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Jaganath Kanakkassery
    • Re: [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Johan Hedberg
      • Re: [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Jaganath K
    • Re: [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Marcel Holtmann
      • Re: [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Jaganath K
        • Re: [PATCH 3/3 v2] doc/mgmt-api: Add advertising phys support to flags, Marcel Holtmann
  • Re: [PATCH 0/3 v2] LE New PHYs kernel interfaces, Jaganath K
• [Bug 197941] New: Bluetooth not working in Kernel 4.14, bugzilla-daemon
  • [Bug 197941] Bluetooth not working in Kernel 4.14, bugzilla-daemon
  • [Bug 197941] Bluetooth not working in Kernel 4.14, bugzilla-daemon
  • [Bug 197941] Bluetooth not working in Kernel 4.14, bugzilla-daemon
  • [Bug 197941] Bluetooth not working in Kernel 4.14, bugzilla-daemon
  • [Bug 197941] Bluetooth not working in Kernel 4.14, bugzilla-daemon
• [BlueZ] bluetoothctl Tab-Completion, manday
  • Re: [BlueZ] bluetoothctl Tab-Completion, Luiz Augusto von Dentz
• [PATCH] mesh: Correct length test in agent.c:request_ascii, sbrown
  • Re: [PATCH] mesh: Correct length test in agent.c:request_ascii, Johan Hedberg
• Connection attempt timeout Android 4.4.4 to bluez5.47, John Klug
• [RFC v1 0/8] Realtek Bluetooth serdev support (H5 protocol), Martin Blumenstingl
  • [RFC v1 1/8] serdev: implement parity configuration, Martin Blumenstingl
  • [RFC v1 2/8] Bluetooth: btrtl: add MODULE_FIRMWARE declarations, Martin Blumenstingl
  • [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Martin Blumenstingl
    • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Marcel Holtmann
      • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Martin Blumenstingl
        • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Marcel Holtmann
          • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Martin Blumenstingl
            • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Emil Lenngren
            • Re: [RFC v1 5/8] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips, Marcel Holtmann
  • [RFC v1 4/8] Bluetooth: btrtl: add support for retrieving the UART settings, Martin Blumenstingl
  • [RFC v1 3/8] Bluetooth: btrtl: split the device initialization into smaller parts, Martin Blumenstingl
  • [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Martin Blumenstingl
    • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Marcel Holtmann
      • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Martin Blumenstingl
    • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Marcel Holtmann
      • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Jeremy Cline
        • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Marcel Holtmann
        • Re: [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules, Martin Blumenstingl
  • [RFC v1 8/8] dt-bindings: net: bluetooth: add support for Realtek Bluetooth chips, Martin Blumenstingl
    • Re: [RFC v1 8/8] dt-bindings: net: bluetooth: add support for Realtek Bluetooth chips, Rob Herring
  • [RFC v1 7/8] Bluetooth: hci_serdev: remove the HCI_UART_INIT_PENDING check, Martin Blumenstingl
    • Re: [RFC v1 7/8] Bluetooth: hci_serdev: remove the HCI_UART_INIT_PENDING check, Marcel Holtmann
      • Re: [RFC v1 7/8] Bluetooth: hci_serdev: remove the HCI_UART_INIT_PENDING check, Martin Blumenstingl
        • Re: [RFC v1 7/8] Bluetooth: hci_serdev: remove the HCI_UART_INIT_PENDING check, Johan Hedberg
• [PATCH BlueZ] obexd: Fix fd which is left even after closing session, ERAMOTO Masaya
  • Re: [PATCH BlueZ] obexd: Fix fd which is left even after closing session, Luiz Augusto von Dentz
• [PATCH Bluez v2 1/2] tools/btmgmt: Introduce set_index(), ERAMOTO Masaya
  • [PATCH Bluez v2 2/2] tools/btmgmt: Use set_index() for --index, ERAMOTO Masaya
  • Re: [PATCH Bluez v2 1/2] tools/btmgmt: Introduce set_index(), Luiz Augusto von Dentz
• Re: Boot crash @hci_uart_tx_wakeup+0x38/0x148 w/ Linus' HEAD?, Lukas Wunner
  • Re: Boot crash @hci_uart_tx_wakeup+0x38/0x148 w/ Linus' HEAD?, John Stultz
    • [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, Lukas Wunner
      • Re: [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, Lukas Wunner
      • Re: [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, Marcel Holtmann
        • Re: [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, John Stultz
          • Re: [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, John Stultz
            • Re: [PATCH] Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops, Marcel Holtmann
            • Backport d73e17281665 to v4.15 stable, Lukas Wunner
              • Re: Backport d73e17281665 to v4.15 stable, Greg Kroah-Hartman
• [PATCH v3 1/6] shared/shell: Add initial implementation, Luiz Augusto von Dentz
  • [PATCH v3 2/6] client: Make use of bt_shell, Luiz Augusto von Dentz
  • [PATCH v3 3/6] shared/shell: Add submenu support, Luiz Augusto von Dentz
  • [PATCH v3 4/6] client: Move advertise related commands to a submenu, Luiz Augusto von Dentz
  • [PATCH v3 5/6] client: Move scan related commands to a submenu, Luiz Augusto von Dentz
  • [PATCH v3 6/6] client: Move gatt related commands to a submenu, Luiz Augusto von Dentz
  • Re: [PATCH v3 1/6] shared/shell: Add initial implementation, Luiz Augusto von Dentz
• [PATCH 3/3 v1] doc/mgmt-api: Add advertising phys support to flags, Jaganath Kanakkassery
  • Re: [PATCH 3/3 v1] doc/mgmt-api: Add advertising phys support to flags, ERAMOTO Masaya
• [PATCH 2/3 v1] doc/mgmt-api: Add support for Set default Phy command, Jaganath Kanakkassery
• [PATCH 1/3 v1] doc/mgmt-api: Add support for Get PHY information command, Jaganath Kanakkassery
• [PATCH 0/3 v1] LE New PHYs kernel interfaces, Jaganath Kanakkassery
• When can I trust with bluetoothctl and 5.47?, John Klug
  • Re: When can I trust with bluetoothctl and 5.47?, Johan Hedberg
• [Bug 197883] New: Freeze when disconnecting bluetooth mouse, bugzilla-daemon
• [PATCHi V2] bluetooth: btusb: Add device ID for RTL8822BE, Larry Finger
• [PATCH BlueZ] avctp: Use different queues for passthrough and vendor PDUs, Luiz Augusto von Dentz
• [PATCH] Bluettoth: btusb: Prevent USB devices to autosuspend while setting interface, abhijeet . kumar
  • Re: [PATCH] Bluettoth: btusb: Prevent USB devices to autosuspend while setting interface, Marcel Holtmann
    • Re: [PATCH] Bluettoth: btusb: Prevent USB devices to autosuspend while setting interface, Bastien Nocera
  • Re: [PATCH] Bluettoth: btusb: Prevent USB devices to autosuspend while setting interface, Johan Hovold
• Re : Re: How connect to bluez two headphones, ruslan.kuzmin@xxxxxxx
• [PATCH 0/8] rsi: add bluetooth and coex support, Amitkumar Karwar
  • [PATCH 1/8] rsi: add rx control block to handle rx packets in USB, Amitkumar Karwar
  • [PATCH 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
    • Re: [PATCH 2/8] rsi: add bluetooth rx endpoint, Marcel Holtmann
      • Re: [PATCH 2/8] rsi: add bluetooth rx endpoint, Amitkumar Karwar
  • [PATCH 3/8] rsi: add header file rsi_header, Amitkumar Karwar
  • [PATCH 4/8] rsi: add coex support, Amitkumar Karwar
  • [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
    • Re: [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
      • Re: [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
      • Re: [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
        • Re: [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Marcel Holtmann
          • Re: [PATCH 5/8] Bluetooth: btrsi: add new rsi bluetooth driver, Amitkumar Karwar
  • [PATCH 6/8] rsi: handle BT traffic in driver, Amitkumar Karwar
  • [PATCH 7/8] rsi: add module parameter operating mode, Amitkumar Karwar
    • Re: [PATCH 7/8] rsi: add module parameter operating mode, Arend van Spriel
  • [PATCH 8/8] rsi: sdio changes to support BT, Amitkumar Karwar
• Security block and Bluez 5.47, John Klug
  • Re: Security block and Bluez 5.47, Luiz Augusto von Dentz
    • Re: Security block and Bluez 5.47, Johan Hedberg
• linux-next: Kconfig warning in drivers/bluetooth/Kconfig, valdis . kletnieks
• porting to bluez5, Thomas Green
• Self qualification of BlueZ with LaunchStudio and Profile Tuning Suite (PTS), Alan Martinovic
• AR3011 Device Under Test, Julien Massot
  • Re: AR3011 Device Under Test, Marcel Holtmann
    • Re: AR3011 Device Under Test, Julien Massot
      • Re: AR3011 Device Under Test, Marcel Holtmann
• [PATCH 0/3] LE New PHYs kernel interfaces, Jaganath Kanakkassery
  • [PATCH] Bluetooth: Define l2cap sock option for LE PHYs, Jaganath Kanakkassery
  • [PATCH 1/3] doc/mgmt-api: Add support for Get supported phys command, Jaganath Kanakkassery
    • Re: [PATCH 1/3] doc/mgmt-api: Add support for Get supported phys command, Marcel Holtmann
  • [PATCH 2/3] doc/mgmt-api: Add support for Set default Phy command, Jaganath Kanakkassery
  • [PATCH 3/3] doc/mgmt-api: Add advertising phys support to flags, Jaganath Kanakkassery
    • Re: [PATCH 3/3] doc/mgmt-api: Add advertising phys support to flags, Marcel Holtmann
      • RE: [PATCH 3/3] doc/mgmt-api: Add advertising phys support to flags, Kanakkassery, JaganathX
• [PATCH] Bluetooth: btusb: Fix BT_HCIBTUSB_AUTOSUSPEND Kconfig option name, Hans de Goede
  • Re: [PATCH] Bluetooth: btusb: Fix BT_HCIBTUSB_AUTOSUSPEND Kconfig option name, Marcel Holtmann
• [PATCH v2] Bluetooth: btusb: Add a Kconfig option to enable USB autosuspend by default, Hans de Goede