The HCILL or eHCILL protocol from TI is actually an H:4 protocol with a
few extra events and thus can also use the h4_recv_buf helper. Instead
of open coding the same funtionality add the extra events to the packet
description table and use h4_recv_buf.
Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 1 +
drivers/bluetooth/hci_ll.c | 214 +++++++++++++++------------------------------
2 files changed, 70 insertions(+), 145 deletions(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index d934a8b09946..8a0a5edb6a0a 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -160,6 +160,7 @@ config BT_HCIUART_ATH3K
config BT_HCIUART_LL
bool "HCILL protocol support"
depends on BT_HCIUART_SERDEV
+ select BT_HCIUART_H4
help
HCILL (HCI Low Level) is a serial protocol for communication
between Bluetooth device and host. This protocol is required for
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 7c55a9f77808..27e414b4e3a2 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -67,13 +67,6 @@
#define HCILL_WAKE_UP_IND 0x32
#define HCILL_WAKE_UP_ACK 0x33
-/* HCILL receiver States */
-#define HCILL_W4_PACKET_TYPE 0
-#define HCILL_W4_EVENT_HDR 1
-#define HCILL_W4_ACL_HDR 2
-#define HCILL_W4_SCO_HDR 3
-#define HCILL_W4_DATA 4
-
/* HCILL states */
enum hcill_states_e {
HCILL_ASLEEP,
@@ -91,8 +84,6 @@ struct ll_device {
};
struct ll_struct {
- unsigned long rx_state;
- unsigned long rx_count;
struct sk_buff *rx_skb;
struct sk_buff_head txq;
spinlock_t hcill_lock; /* HCILL state lock */
@@ -373,155 +364,88 @@ static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb)
return 0;
}
-static inline int ll_check_data_len(struct hci_dev *hdev, struct ll_struct *ll, int len)
+static int ll_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- int room = skb_tailroom(ll->rx_skb);
-
- BT_DBG("len %d room %d", len, room);
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct ll_struct *ll = hu->priv;
- if (!len) {
- hci_recv_frame(hdev, ll->rx_skb);
- } else if (len > room) {
- BT_ERR("Data length is too large");
- kfree_skb(ll->rx_skb);
- } else {
- ll->rx_state = HCILL_W4_DATA;
- ll->rx_count = len;
- return len;
+ switch (hci_skb_pkt_type(skb)) {
+ case HCILL_GO_TO_SLEEP_IND:
+ BT_DBG("HCILL_GO_TO_SLEEP_IND packet");
+ ll_device_want_to_sleep(hu);
+ break;
+ case HCILL_GO_TO_SLEEP_ACK:
+ /* shouldn't happen */
+ bt_dev_err(hdev, "received HCILL_GO_TO_SLEEP_ACK in state %ld",
+ ll->hcill_state);
+ break;
+ case HCILL_WAKE_UP_IND:
+ BT_DBG("HCILL_WAKE_UP_IND packet");
+ ll_device_want_to_wakeup(hu);
+ break;
+ case HCILL_WAKE_UP_ACK:
+ BT_DBG("HCILL_WAKE_UP_ACK packet");
+ ll_device_woke_up(hu);
+ break;
}
- ll->rx_state = HCILL_W4_PACKET_TYPE;
- ll->rx_skb = NULL;
- ll->rx_count = 0;
-
+ kfree_skb(skb);
return 0;
}
+#define LL_RECV_SLEEP_IND \
+ .type = HCILL_GO_TO_SLEEP_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = 0
+
+#define LL_RECV_SLEEP_ACK \
+ .type = HCILL_GO_TO_SLEEP_ACK, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = 0
+
+#define LL_RECV_WAKE_IND \
+ .type = HCILL_WAKE_UP_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = 0
+
+#define LL_RECV_WAKE_ACK \
+ .type = HCILL_WAKE_UP_ACK, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = 0
+
+static const struct h4_recv_pkt ll_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = hci_recv_frame },
+ { LL_RECV_SLEEP_IND, .recv = ll_recv_frame },
+ { LL_RECV_SLEEP_ACK, .recv = ll_recv_frame },
+ { LL_RECV_WAKE_IND, .recv = ll_recv_frame },
+ { LL_RECV_WAKE_ACK, .recv = ll_recv_frame },
+};
+
/* Recv data */
static int ll_recv(struct hci_uart *hu, const void *data, int count)
{
struct ll_struct *ll = hu->priv;
- const char *ptr;
- struct hci_event_hdr *eh;
- struct hci_acl_hdr *ah;
- struct hci_sco_hdr *sh;
- int len, type, dlen;
-
- BT_DBG("hu %p count %d rx_state %ld rx_count %ld", hu, count, ll->rx_state, ll->rx_count);
-
- ptr = data;
- while (count) {
- if (ll->rx_count) {
- len = min_t(unsigned int, ll->rx_count, count);
- skb_put_data(ll->rx_skb, ptr, len);
- ll->rx_count -= len; count -= len; ptr += len;
-
- if (ll->rx_count)
- continue;
-
- switch (ll->rx_state) {
- case HCILL_W4_DATA:
- BT_DBG("Complete data");
- hci_recv_frame(hu->hdev, ll->rx_skb);
-
- ll->rx_state = HCILL_W4_PACKET_TYPE;
- ll->rx_skb = NULL;
- continue;
-
- case HCILL_W4_EVENT_HDR:
- eh = hci_event_hdr(ll->rx_skb);
-
- BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen);
-
- ll_check_data_len(hu->hdev, ll, eh->plen);
- continue;
- case HCILL_W4_ACL_HDR:
- ah = hci_acl_hdr(ll->rx_skb);
- dlen = __le16_to_cpu(ah->dlen);
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
- BT_DBG("ACL header: dlen %d", dlen);
-
- ll_check_data_len(hu->hdev, ll, dlen);
- continue;
-
- case HCILL_W4_SCO_HDR:
- sh = hci_sco_hdr(ll->rx_skb);
-
- BT_DBG("SCO header: dlen %d", sh->dlen);
-
- ll_check_data_len(hu->hdev, ll, sh->dlen);
- continue;
- }
- }
-
- /* HCILL_W4_PACKET_TYPE */
- switch (*ptr) {
- case HCI_EVENT_PKT:
- BT_DBG("Event packet");
- ll->rx_state = HCILL_W4_EVENT_HDR;
- ll->rx_count = HCI_EVENT_HDR_SIZE;
- type = HCI_EVENT_PKT;
- break;
-
- case HCI_ACLDATA_PKT:
- BT_DBG("ACL packet");
- ll->rx_state = HCILL_W4_ACL_HDR;
- ll->rx_count = HCI_ACL_HDR_SIZE;
- type = HCI_ACLDATA_PKT;
- break;
-
- case HCI_SCODATA_PKT:
- BT_DBG("SCO packet");
- ll->rx_state = HCILL_W4_SCO_HDR;
- ll->rx_count = HCI_SCO_HDR_SIZE;
- type = HCI_SCODATA_PKT;
- break;
-
- /* HCILL signals */
- case HCILL_GO_TO_SLEEP_IND:
- BT_DBG("HCILL_GO_TO_SLEEP_IND packet");
- ll_device_want_to_sleep(hu);
- ptr++; count--;
- continue;
-
- case HCILL_GO_TO_SLEEP_ACK:
- /* shouldn't happen */
- BT_ERR("received HCILL_GO_TO_SLEEP_ACK (in state %ld)", ll->hcill_state);
- ptr++; count--;
- continue;
-
- case HCILL_WAKE_UP_IND:
- BT_DBG("HCILL_WAKE_UP_IND packet");
- ll_device_want_to_wakeup(hu);
- ptr++; count--;
- continue;
-
- case HCILL_WAKE_UP_ACK:
- BT_DBG("HCILL_WAKE_UP_ACK packet");
- ll_device_woke_up(hu);
- ptr++; count--;
- continue;
-
- default:
- BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr);
- hu->hdev->stat.err_rx++;
- ptr++; count--;
- continue;
- }
-
- ptr++; count--;
-
- /* Allocate packet */
- ll->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!ll->rx_skb) {
- BT_ERR("Can't allocate mem for new packet");
- ll->rx_state = HCILL_W4_PACKET_TYPE;
- ll->rx_count = 0;
- return -ENOMEM;
- }
-
- hci_skb_pkt_type(ll->rx_skb) = type;
+ ll->rx_skb = h4_recv_buf(hu->hdev, ll->rx_skb, data, count,
+ ll_recv_pkts, ARRAY_SIZE(ll_recv_pkts));
+ if (IS_ERR(ll->rx_skb)) {
+ int err = PTR_ERR(ll->rx_skb);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+ ll->rx_skb = NULL;
+ return err;
}
return count;
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
