Hi Hans, > This reverts commit 43fff7683468 ("Bluetooth: hci_bcm: Streamline runtime > PM code"). The commit msg for this commit states "No functional change > intended.", but replacing: > > pm_runtime_get(); > pm_runtime_mark_last_busy(); > pm_runtime_put_autosuspend(); > > with: > > pm_request_resume(); > > Does result in a functional change, pm_request_resume() only calls > pm_runtime_mark_last_busy() if the device was suspended before the call. > > This results in the following happening: > > 1) Device is runtime suspended > 2) Device drives host_wake IRQ logically high as it starts receiving data > 3) bcm_host_wake() gets called, causes the device to runtime-resume, > current time gets marked as last_busy time > 4) After 5 seconds the autosuspend timer expires and the dev autosuspends > as no one has been calling pm_runtime_mark_last_busy(), the device was > resumed during those 5 seconds, so all the pm_request_resume() calls > while receiving data and/or bcm_host_wake() calls were nops > 5) If 4) happens while the device has (just received) data in its buffer to > be read by the host the IRQ line is *already* / still logically high > when we autosuspend and since we use an edge triggered IRQ, the IRQ > will never trigger, causing the device to get stuck in suspend > > Therefor this commit has to be reverted, so that we avoid the device > getting stuck in suspend. > > Cc: Lukas Wunner <lukas@xxxxxxxxx> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > drivers/bluetooth/hci_bcm.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) patch has been applied to bluetooth-stable tree. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html