Linux ARM MSM

• Thread Index

• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v3 12/18] soc: qcom: Register pstore frontend region with minidump
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v3 09/18] soc: qcom: Add qcom's pstore minidump driver support
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] remoteproc: qcom: pas: mark adsp_segment_dump() static
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH][next] media: venus: Replace one-element arrays with flexible-array members
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH][next] media: venus: Replace one-element arrays with flexible-array members
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH v3] bus: mhi: host: Skip MHI reset if device is in RDDM
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] accel/qaic: silence some uninitialized variable warnings
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v5 6/8] drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v10 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH RESEND 2/2] dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 09/10] ARM: dts: qcom-mdm9615: specify clocks for the lcc device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v5 6/8] drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH V6 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 5/8] dt-bindings: qcom: Add ipq5018 bindings
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 6/8] dt-bindings: scm: Add compatible for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 1/8] dt-bindings: arm64: Add IPQ5018 clock and reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V6 0/8] Add minimal boot support for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH V5 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: sm8550: enable DISPCC by default
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sm8550-mtp: drop redundant MDP status
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP449 variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sm8550-mtp: drop redundant MDP status
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: sm8550: enable DISPCC by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH V5 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 1/3] arm64: dts: qcom: sm8550: enable DISPCC by default
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: sm8550-mtp: drop redundant MDP status
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v10 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v11 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v11 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v11 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v11 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v11 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: pm8550: add flash LED controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8550-qrd: add flash LEDs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH V2] arm64: dts: qcom: ipq9574: add few device nodes
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v10 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Will Deacon <will@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP449 variant
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 0/2] Add initial support for RDP449 of IPQ9574 family
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: clock: qcom,gcc-sm8250: add missing bi_tcxo_ao clock
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8550-qrd: add USB OTG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550-qrd: add USB OTG
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sc8180x: gracefully handle missing IO memory resource
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 03/12] drm/exynos: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 02/12] drm/armada: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/12] drm/armada: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 0/2] Refactor the pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 0/8] drm/i915: move DSC RC tables to drm_dsc_helper.c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/18] Venus QoL / maintainability fixes
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v11 0/9] Enable IPQ9754 USB
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] media: venus: only set H264_TRANSFORM_8X8 on supported hfi versions
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6350: Move wifi node to correct place
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH V5 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH RESEND 2/2] dt-bindings: thermal: tsens: Add compatible for SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RESEND 0/2] Lost tsens compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RESEND 1/2] dt-bindings: thermal: tsens: Add QCM2290
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V5 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 6/8] dt-bindings: scm: Add compatible for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 5/8] dt-bindings: qcom: Add ipq5018 bindings
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 1/8] dt-bindings: arm64: Add IPQ5018 clock and reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 0/8] Add minimal boot support for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: clock: qcom,gcc-sc7280: document CX power domain
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: clock: qcom,gcc-sm8250: add missing bi_tcxo_ao clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066
  • From: Tim Jiang <quic_tjiang@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 04/11] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH V3 0/6] Incremental patches on minimal boot support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH v3] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v9 1/6] s390/ism: Set DMA coherent mask
  • From: Petr Tesařík <petr@xxxxxxxxxxx>
• Re: [PATCH V2 1/4] dt-bindings: clock: Add crypto clock and reset definitions
  • From: Anusha Canchi <quic_anusha@xxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH 0/5] QTI RB2 features
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH V2 1/4] dt-bindings: clock: Add crypto clock and reset definitions
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v9 1/6] s390/ism: Set DMA coherent mask
  • From: Pierre Morel <pmorel@xxxxxxxxxxxxx>
• Re: [RESEND,PATCH 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [RESEND,PATCH 1/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [RESEND,PATCH 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND,PATCH 1/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm6350: Move wifi node to correct place
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [RESEND,PATCH 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [RESEND,PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [RESEND,PATCH 1/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: thermal: tsens: Add QCM2290
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Kishon Vijay Abraham I <Kishon.vijayabraham@xxxxxxx>
• Re: [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RESEND PATCH] soundwire: qcom: drop unused struct qcom_swrm_ctrl members
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: smd-rpm: conditionally enable scaling before doing handover
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/5] arm64: dts: qcom: qrb4210-rb2: Enable EUD debug peripheral
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 4/5] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: qcom: msm8226: Add ocmem
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-longcheer-l8910: Add front flash LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: thermal: tsens: Add QCM2290
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 01/14] dt-bindings: thermal: qcom-tsens: Add compatible for SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: thermal: tsens: Fix "make dtbs_check" error
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: ipq5332: add few more reserved memory region
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: ipq5332: define UART1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: ipq5332: rename mi01.2 dts to rdp441
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 16/25] iommu: Remove ops->set_platform_dma_ops()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 06/25] iommu/mtk_iommu_v1: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 08/25] iommu: Allow an IDENTITY domain as the default_domain in ARM32
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 15/25] iommufd/selftest: Make the mock iommu driver into a real driver
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 13/25] iommu/omap: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 05/25] iommu/tegra-gart: Remove tegra-gart
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 21/25] iommu: Require a default_domain for all iommu drivers
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 22/25] iommu: Add __iommu_group_domain_alloc()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 20/25] iommu/sun50i: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 00/25] iommu: Make default_domain's mandatory
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 19/25] iommu/mtk_iommu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 04/25] iommu: Add IOMMU_DOMAIN_PLATFORM for S390
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 12/25] iommu/tegra-smmu: Support DMA domains in tegra
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 03/25] powerpc/iommu: Setup a default domain and remove set_platform_dma_ops
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 18/25] iommu/ipmmu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 07/25] iommu: Reorganize iommu_get_default_domain_type() to respect def_domain_type()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 09/25] iommu/fsl_pamu: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 23/25] iommu: Add ops->domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 01/25] iommu: Add iommu_ops->identity_domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 14/25] iommu/msm: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 10/25] iommu/exynos: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 02/25] iommu: Add IOMMU_DOMAIN_PLATFORM
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 17/25] iommu/qcom_iommu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 24/25] iommu: Convert simple drivers with DOMAIN_DMA to domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 25/25] iommu: Convert remaining simple drivers to domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v2 11/25] iommu/tegra-smmu: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v9 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v9 1/8] drm/msm/dpu: add dsc blocks to the catalog of MSM8998 and SC8180X
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v9 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 4/8] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 1/8] drm/msm/dpu: add dsc blocks to the catalog of MSM8998 and SC8180X
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v9 0/8] add DSC 1.2 dpu supports
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 04/11] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC PATCH v2 02/13] drm/msm/dpu: take plane rotation into account for wide planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: qrb4210-rb2: Enable display out
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 02/13] drm/msm/dpu: take plane rotation into account for wide planes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 02/13] drm/msm/dpu: take plane rotation into account for wide planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/12] drm/armada: Use regular fbdev I/O helpers
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/12] drm/armada: Use regular fbdev I/O helpers
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 03/12] drm/exynos: Use regular fbdev I/O helpers
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH V2 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: qrb4210-rb2: Enable display out
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 1/8] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2] leds: qcom-lpg: Fix PWM period limits
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH V2 1/4] dt-bindings: clock: Add crypto clock and reset definitions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: thermal: tsens: Fix "make dtbs_check" error
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: qrb4210-rb2: Enable display out
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Fix PWM period limits
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH V2 0/4] Enable crypto for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V2 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V2 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V2 1/4] dt-bindings: clock: Add crypto clock and reset definitions
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V2 2/4] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v9 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• [PATCH v4 9/9] drm/msm: Wire up comm/cmdline override for fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 6/9] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 3/9] drm/msm: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 0/9] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v8 11/11] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 10/11] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 09/11] arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 08/11] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 07/11] arm64: dts: qcom: pm8150b: Add a TCPM description
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 06/11] arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switching
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 05/11] dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device types
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 04/11] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 02/11] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark regulator-*-microamp required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 03/11] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 01/11] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v8 00/11] Add Qualcomm PMIC TPCM support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: set pm8150b_typec_res storage-class-specifier to static
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RESEND PATCH] soundwire: qcom: drop unused struct qcom_swrm_ctrl members
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: set pm8150b_typec_res storage-class-specifier to static
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: qrb4210-rb2: Enable display out
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/5] arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/5] QTI RB2 features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8775p: mark the UFS controller as dma-coherent
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 1/4] devres: Provide krealloc_array
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: set pm8150b_typec_res storage-class-specifier to static
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] usb: typec: qcom: set pm8150b_typec_res storage-class-specifier to static
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v3 08/10] clk: qcom: gcc-mdm9615: drop the cxo clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 07/10] clk: qcom: gcc-mdm9615: use parent_hws/_data instead of parent_names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 06/10] clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH RFC 2/4] Bluetooth: btqca: Add WCN3988 support
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH RFC 5/5] arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 0/5] of: reserved_mem: Provide more control about allocation behavior
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: reserved-memory: Add alloc-{bottom-up,top-down}
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/5] of: reserved_mem: Implement alloc-{bottom-up,top-down}
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH RFC 4/5] arm64: dts: qcom: msm8916: Enable modem on two phones
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 3/5] of: reserved_mem: Use stable allocation order
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: ipq9574: add thermal zone nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: ipq9574: add tsens node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: thermal: tsens: Fix "make dtbs_check" error
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 0/4] Enable IPQ9574 TSENS support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 RESEND 1/4] arm64: dts: qcom: sc7180: Don't enable lpass clocks by default
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v6 RESEND 4/4] arm64: dts: qcom: Add Acer Aspire 1
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v6 RESEND 2/4] arm64: dts: qcom: sc7180: Drop redundant disable in mdp
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v6 RESEND 0/4] Add Acer Aspire 1
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 RESEND 3/4] dt-bindings: arm: qcom: Add Acer Aspire 1
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: sa8775p-ride: enable UFS
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 2/3] arm64: dts: qcom: sa8775p: add UFS nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 1/3] dt-bindings: ufs: qcom: add compatible for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/12] drm/i915: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 09/12] drm/tegra: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 10/12] drm/fb-helper: Export helpers for marking damage areas
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 11/12] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 08/12] drm/omapdrm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 07/12] drm/msm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 06/12] drm/fbdev-dma: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 05/12] drm/radeon: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 04/12] drm/gma500: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 03/12] drm/exynos: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 02/12] drm/armada: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 00/12] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 01/12] fbdev: Add Kconfig options to select different fb_ops helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH V3 5/6] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH -next] fastrpc: Use memdup_user instead of kmalloc/copy_from_user
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH -next] fastrpc: Use memdup_user instead of kmalloc/copy_from_user
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v9 1/6] s390/ism: Set DMA coherent mask
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 4/6] s390/pci: Use dma-iommu layer
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 2/6] iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 6/6] iommu/dma: Make flush queue sizes and timeout driver configurable
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v9 3/6] s390/pci: prepare is_passed_through() for dma-iommu
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/8] drm/i915: move DSC RC tables to drm_dsc_helper.c
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: nvmem: qfprom: Add compatible for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: nvmem: qfprom: Add compatible for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 07/10] dt-bindings: arm: msm: Add LLCC compatible for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v3 04/10] nvmem: qfprom: Add support for secure reading on QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Kishon VijayAbraham I <kvijayab@xxxxxxx>
• Re: [PATCH] pinctrl: qcom: sa8775p: add the wakeirq map
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 1/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [PATCH V5 0/3] PCI: designware-ep: Fix DBI access before core init
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Anusha Canchi <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Anusha Canchi <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: nvmem: qfprom: Add compatible for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v3 0/7] Add support for MHI Endpoint function driver
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: qcom: Refactor generic qcom pinctrl driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 0/2] Refactor the pinctrl driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add WCN3988 Bluetooth support for Fairphone 4
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Satya Durga Srinivasu Prabhala <quic_satyap@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: sa8775p: add UFS nodes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/5] arm64: dts: qcom: sa8775p: add more IOMMUs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable""
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V7 0/2] Enable crashdump collection support for IPQ9574
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] arm64: qcom: sa8775p: add support for USB
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] arm64: dts: qcom: sm8150: drop incorrect serial properties
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add F(x)tec Pro1X (QX1050) DTS
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: add the PMU node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] dt-bindings: soc: qcom: aoss-qmp: add compatible for sa8775p
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/3] arm64: qcom: fix the reboot reason handling on sa8775p
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: add the watchdog node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Add EMAC3 support for sa8540p-ride (devicetree bits)
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 6/8] phy: qcom-qmp-combo: Introduce drm_bridge
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 5/8] phy: qcom-qmp-combo: Introduce orientation switching
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 2/8] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 4/8] phy: qcom-qmp-combo: Introduce orientation variable
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 0/8] phy: qcom-qmp-combo: Support orientation switching
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 1/3] drm/msm/dp: Drop now unused dp_hpd module
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 3/3] drm/msm/dp: Clean up pdev/dev duplication in dp_power
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 2/3] drm/msm/dp: Clean up logs dp_power module
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v8 0/9] Add multiport support for DWC3 controllers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Fix PWM period limits
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC PATCH] arm64: dts: qcom: add device tree for DB845c working in dual DSI mode
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sc8180x: gracefully handle missing IO memory resource
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 0/8] add DSC 1.2 dpu supports
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 2/8] drm/display/dsc: add helper to set semi-const parameters
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8916-longcheer-l8910: Add front flash LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [RFC PATCH v2 05/13] drm/msm/dpu: get rid of struct dpu_rm_requirements
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 03/13] drm/msm/dpu: encoder: simplify debugfs handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 02/13] drm/msm/dpu: take plane rotation into account for wide planes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: "Linux regression tracking #adding (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH v2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 1/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v8 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 8/9] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 2/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 1/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v8 0/9] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3 04/18] soc: qcom: Add Qualcomm minidump kernel driver
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v10 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/8] drm/i915/dsc: move rc_buf_thresh values to common helper
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 1/8] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 03/18] docs: qcom: Add qualcomm minidump guide
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH RESEND v3 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] pinctrl: qcom: sc8180x: gracefully handle missing IO memory resource
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/4] devres: Provide krealloc_array
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Fix PWM period limits
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add F(x)tec Pro1X (QX1050) DTS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 09/10] arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 08/10] Revert "arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 07/10] dt-bindings: arm: msm: Add LLCC compatible for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: sa8775p: add the wakeirq map
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 09/10] ARM: dts: qcom-mdm9615: specify clocks for the lcc device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Add Fxtec Pro1X
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 2/4] interconnect: add clk-based icc provider support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: msm8226: Provide clocks to mmcc node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Refactor generic qcom pinctrl driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/4] Bluetooth: btqca: Add WCN3988 support
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 00/11] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 02/13] drm/msm/dpu: take plane rotation into account for wide planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v8 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v3 08/10] clk: qcom: gcc-mdm9615: drop the cxo clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: clock: qcom,lcc.yaml: describe clocks for lcc,qcom-mdm9615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Add WCN3988 Bluetooth support for Fairphone 4
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• Re: (subset) [PATCH 25/40] dt-bindings: pinctrl: qcom,sc8280xp-tlmm: simplify with unevaluatedProperties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm6350: add uart1 node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v10 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH V2 2/5] dt-bindings: clock: qcom: Add GCC clocks for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v8 4/8] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] soc: qcom: llcc: Add support for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/2] spi: spi-geni-qcom: Add new interfaces and utilise them to do map/unmap in framework for SE DMA
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add BLSP DMAs for I2C
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2] misc: fastrpc: Pass proper scm arguments for secure map request
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: (subset) [PATCH 35/40] dt-bindings: pinctrl: qcom,sm7150-tlmm: simplify with unevaluatedProperties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v10 0/8] Introduce MSM-specific DSC helpers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] drm/msm/dp: enable HDP plugin/unplugged interrupts to hpd_enable/disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] Input: add driver for Focaltech FTS touchscreen
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [RFC PATCH v2 03/13] drm/msm/dpu: encoder: simplify debugfs handling
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v10 5/8] drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Fix PWM period limits
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH 02/20] iommu/terga-gart: Replace set_platform_dma_ops() with IOMMU_DOMAIN_PLATFORM
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 06/10] soc: qcom: Add LLCC support for multi channel DDR
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: add WCD9385 audio-codec
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 3/5] dt-bindings: clock: qcom: Add RPMHCC for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/20] iommu/terga-gart: Replace set_platform_dma_ops() with IOMMU_DOMAIN_PLATFORM
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 00/10] clk: qcom: convert mdm9615 to parent_hws/_data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Reassign memory ownership only for remote heap
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: nvmem: qfprom: Add compatible for QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v10 6/8] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v3 04/10] nvmem: qfprom: Add support for secure reading on QDU1000/QRU1000
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [Intel-gfx] [PATCH 07/11] drm/omapdrm: Use regular fbdev I/O helpers
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 10/10] ARM: dts: qcom-mdm9615: specify gcc clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] misc: fastrpc: Fixes for issues in userspace
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/2] soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm: qcom: Add Fxtec Pro1X
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• Re: power_supply cooling interface
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v1 1/2] drm/msm/dp: enable HDP plugin/unplugged interrupts to hpd_enable/disable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v10 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH RFC 3/4] arm64: dts: qcom: sm6350: add uart1 node
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• RE: [PATCH 04/11] drm/radeon: Use regular fbdev I/O helpers
  • From: "Deucher, Alexander" <Alexander.Deucher@xxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Reassign memory ownership only for remote heap
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Move dma-buf mmap() reservation locking down to exporters
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH RFC 3/4] arm64: dts: qcom: sm6350: add uart1 node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v2 05/13] drm/msm/dpu: get rid of struct dpu_rm_requirements
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: clock: drop qcom,lcc-mdm9615 header file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Remove the msm_function struct
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/3] Minor updates in the IPQ5332 DTS files
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH] leds: qcom-lpg: Fix PWM period limits
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v8 6/8] drm/msm/dpu: separate DSC flush update out of interface
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 04/10] nvmem: qfprom: Add support for secure reading on QDU1000/QRU1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 0/8] add DSC 1.2 dpu supports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Refactor generic qcom pinctrl driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: (subset) [PATCH 04/40] dt-bindings: pinctrl: qcom,ipq9574-tlmm: simplify with unevaluatedProperties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: power_supply cooling interface
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v3 0/2] Add F(x)tec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: ipq5332: fix the order of SLEEP_CLK and XO clock
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH v3 06/10] clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/10] ARM: dts: qcom-mdm9615: specify clocks for the lcc device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: power_supply cooling interface
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: qcom: ipq5332: fix the src parameter in ftbl_gcc_apss_axi_clk_src
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v8 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Refactor generic qcom pinctrl driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v10 1/8] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: net: qualcomm: Add WCN3988
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v8 0/8] add DSC 1.2 dpu supports
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v3 03/10] arm64: dts: qcom: qdu1000: Add properties to qfprom for multi channel DDR
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/4] Add WCN3988 Bluetooth support for Fairphone 4
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v3 04/10] clk: qcom: gcc-mdm9615: use ARRAY_SIZE instead of specifying num_parents
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add WCD9385 audio-codec
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH 18/40] dt-bindings: pinctrl: qcom,qcm2290-tlmm: simplify with unevaluatedProperties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: power_supply cooling interface
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v8 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH] pinctrl: qcom: sa8775p: add the wakeirq map
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v10 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Remove the msm_function struct
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rename ice to qcom-ice to avoid module name conflict
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v8 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v8 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v8 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v3 05/10] clk: qcom: drop lcc-mdm9615 in favour of lcc-msm8960
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 07/10] clk: qcom: gcc-mdm9615: use parent_hws/_data instead of parent_names
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 02/20] iommu/terga-gart: Replace set_platform_dma_ops() with IOMMU_DOMAIN_PLATFORM
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v3 06/10] soc: qcom: Add LLCC support for multi channel DDR
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v10 2/8] drm/display/dsc: add helper to set semi-const parameters
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH V2 4/5] clk: qcom: rpmh: Add RPMH clocks support for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V2 2/5] dt-bindings: clock: qcom: Add GCC clocks for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V2 3/5] dt-bindings: clock: qcom: Add RPMHCC for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V2 5/5] clk: qcom: Add GCC driver support for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V2 0/5] Add GCC and RPMHCC support for sdx75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V2 1/5] clk: qcom: branch: Extend the invert logic for branch2 clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: nvmem: qfprom: Add compatible for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 10/10] soc: qcom: llcc: Add QDU1000 and QRU1000 LLCC support
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 08/10] Revert "arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller"
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 07/10] dt-bindings: arm: msm: Add LLCC compatible for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 09/10] arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 00/10] soc: qcom: llcc: Add support for QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 06/10] soc: qcom: Add LLCC support for multi channel DDR
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 05/10] soc: qcom: llcc: Refactor llcc driver to support multiple configuration
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 04/10] nvmem: qfprom: Add support for secure reading on QDU1000/QRU1000
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 03/10] arm64: dts: qcom: qdu1000: Add properties to qfprom for multi channel DDR
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v3 01/10] nvmem: qfprom: Add support for secure reading
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: Refactor generic qcom pinctrl driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 0/2] Refactor the pinctrl driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rename ice to qcom-ice to avoid module name conflict
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 00/11] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add BLSP DMAs for I2C
  • From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: nvmem: mxs-ocotp: drop unneeded address/size-cells
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH RFC 2/4] Bluetooth: btqca: Add WCN3988 support
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 00/11] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] media: venus: only set H264_TRANSFORM_8X8 on supported hfi versions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: Add generic sync_state callback for disabling unused clocks
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 06/11] drm/msm: Use regular fbdev I/O helpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 6/8] phy: qcom-qmp-combo: Introduce drm_bridge
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 4/8] phy: qcom-qmp-combo: Introduce orientation variable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH 1/2] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH 0/2]] Enable crypto for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH v7 4/4] pinctrl: qcom: Add SDX75 pincontrol driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v7 2/4] pinctrl: qcom: Remove the msm_function struct
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 11/11] drm/i915: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 10/11] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 09/11] drm/fb-helper: Export helpers for marking damage areas
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 08/11] drm/tegra: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 07/11] drm/omapdrm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 06/11] drm/msm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 05/11] drm/fbdev-dma: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 03/11] drm/gma500: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 04/11] drm/radeon: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 02/11] drm/exynos: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 01/11] drm/armada: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 00/11] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v3 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 6/7] ufs: mcq: Use ufshcd_mcq_poll_cqe_lock() in mcq mode
  • From: "Bao D. Nguyen" <quic_nguyenb@xxxxxxxxxxx>
• Re: [PATCH v2 00/18] Venus QoL / maintainability fixes
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 02/20] iommu/terga-gart: Replace set_platform_dma_ops() with IOMMU_DOMAIN_PLATFORM
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3] bus: mhi: host: Skip MHI reset if device is in RDDM
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] drm/msm/dp: enable HDP plugin/unplugged interrupts to hpd_enable/disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: Add generic sync_state callback for disabling unused clocks
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH v3 2/5] Input: add driver for Focaltech FTS touchscreen
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 09/10] ARM: dts: qcom-mdm9615: specify clocks for the lcc device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/10] clk: qcom: gcc-mdm9615: drop the cxo clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/10] ARM: dts: qcom-mdm9615: specify gcc clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/10] clk: qcom: gcc-mdm9615: use parent_hws/_data instead of parent_names
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/10] clk: qcom: drop lcc-mdm9615 in favour of lcc-msm8960
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/10] clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/10] clk: qcom: gcc-mdm9615: use ARRAY_SIZE instead of specifying num_parents
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: clock: provide separate bindings for qcom,gcc-mdm9615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: clock: drop qcom,lcc-mdm9615 header file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: clock: qcom,lcc.yaml: describe clocks for lcc,qcom-mdm9615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/10] clk: qcom: convert mdm9615 to parent_hws/_data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/2] drm/msm/dp: enable HDP plugin/unplugged interrupts to hpd_enable/disable
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v6 4/4] arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 3/4] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 2/4] interconnect: add clk-based icc provider support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>