+ Mark. On Mon, 15 May 2023 at 21:26, Bjorn Andersson <andersson@xxxxxxxxxx> wrote: > > On Mon, May 15, 2023 at 08:23:23PM +0530, Amit Pundir wrote: > > This reverts commit ad44ac082fdff7ee57fe125432f7d9d7cb610a23. > > > > This patch restores the synchronous probing for > > qcom-rpmh-regulator because asynchronous probing broke > > Dragonboard 845c (SDM845) running AOSP. UFSHC fail to > > initialize properly and DB845c fails to boot regardless > > of "rootwait" bootarg being present or not > > https://bugs.linaro.org/show_bug.cgi?id=5975. > > > > Looking at the first attachment, I would suggest that UFS fails because > it's not able to get hold of its regulators, just as any other device > with supplies would. > > The typical cause for rpmh timeouts is that you're no longer able to > talk to the rpmh. Could you please attempt to trace the system and see > what's happening in parallel that would cause such issue. This is happening very early in the boot process (first stag init), wherein init is supposed to load the kernel modules from ramdisk and mount the partitions. System does boot successfully 2/5 times, so this is definitely a timing issue as Douglas also pointed out in the other thread. I'll try to follow his suggestions and narrow down the issue further. > > Also note that such issues often also results in UFS timeouts, which > results in the familiar UFS debug dumps. > > > In the second log, the system crashes 51 seconds after rpmh probes, > around the time where other sync_state is happening. This too would seem > related to missing resource votes, but I would expect being a separate > issue. > > PS. this is a patch in the regulator code, but I don't see Mark in the > recipients list... Sorry about that. I thought I had Mark copied over from the other thread, after-all he was the one who suggested this patch, but I didn't :facepalm: Regards, Amit Pundir > > Regards, > Bjorn > > > Signed-off-by: Amit Pundir <amit.pundir@xxxxxxxxxx> > > --- > > drivers/regulator/qcom-rpmh-regulator.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c > > index b0a58c62b1e2..30659922b0aa 100644 > > --- a/drivers/regulator/qcom-rpmh-regulator.c > > +++ b/drivers/regulator/qcom-rpmh-regulator.c > > @@ -1517,7 +1517,7 @@ MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); > > static struct platform_driver rpmh_regulator_driver = { > > .driver = { > > .name = "qcom-rpmh-regulator", > > - .probe_type = PROBE_PREFER_ASYNCHRONOUS, > > + .probe_type = PROBE_FORCE_SYNCHRONOUS, > > .of_match_table = of_match_ptr(rpmh_regulator_match_table), > > }, > > .probe = rpmh_regulator_probe, > > -- > > 2.25.1 > >
