Re: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/10/2023 4:13 PM, Devi Priya wrote:
Add the initial device tree support for the Reference Design
Platform(RDP) 418 based on IPQ9574 family of SoC. This patch series adds
support for Console UART, SPI NOR, eMMC and SMPA1 regulator node.

This series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@xxxxxxxxxxx/
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@xxxxxxxxxxx/

Thanks,
Devi Priya
Devi Priya (2):
   dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
   arm64: dts: qcom: ipq9574: add support for RDP418 variant

  .../devicetree/bindings/arm/qcom.yaml         |   2 +
  arch/arm64/boot/dts/qcom/Makefile             |   1 +
  arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts   | 124 ++++++++++++++++++
  3 files changed, 127 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts


base-commit: 52025ebbb518a2d876b8aba191b348ffb1cf368b



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux