Linux ARM MSM

• Thread Index

• [PATCH v2 1/5] arm64: dts: qcom: pmi8998: enable rradc by default
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v9 2/2] power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v9 0/2] power: supply: introduce support for the Qualcomm smb2 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: pmi8998: add charger node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: pmi8998: add charger node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 7/8] arm64: dts: qcom: msm8916: Define regulator constraints next to usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v8 11/11] arm64: dts: qcom: sm8450: add crypto nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v5 4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v5 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v5 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v5 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 3/5] firmware: scm: Modify only the download bits in TCSR register
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sm8550: enable PMIC RTC on MTP & QRD boards
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: sm8550-qrd: add notification RGB LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] arm64: dts: qcom: pm8550: add PWM controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable pmi8998 charger
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: sdm845-shift-axolotl: enable pmi8998 charger
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: pmi8998: add charger node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/6] arm64: dts: qcom: pmi8998: enable rradc by default
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: (subset) [PATCH V3 0/5] Add APSS clock controller support for IPQ9574
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Make SID for PM7250B configurable (and a small fixup)
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V5 0/3] Add regulator support for IPQ9574 SoC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add initial support for RDP449 of IPQ9574 family
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/2] Add few device nodes for IPQ9574 SoC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V3 0/6] Incremental patches on minimal boot support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V4 0/5] Add regulator support for IPQ9574 SoC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v8 10/11] arm64: dts: qcom: sm8350: Add Crypto Engine support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 09/11] arm64: dts: qcom: sm8250: Add Crypto Engine support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 11/11] arm64: dts: qcom: sm8450: add crypto nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 05/11] dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and IPQ4019 SoCs
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 06/11] dt-bindings: qcom-qce: Add compatibles for SM6115 and QCM2290
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 08/11] arm64: dts: qcom: sm8150: Add Crypto Engine support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 04/11] arm64: dts: qcom: sdm845: Fix the slimbam DMA engine compatible string
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 01/11] dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 02/11] dt-bindings: dma: Increase iommu maxItems for BAM DMA
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 03/11] arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 2/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: qcom,tcsr: add the compatible for IPQ8074
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v2 3/3] media: camss: Link CAMSS power domain
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v2 0/3] media: camss: Link CAMSS power domain on MSM8996
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: msm8996: Add CAMSS power domain and power-domain-names to CAMSS
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH v7 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH V4 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V4 2/4] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: clock: Add crypto clock and reset definitions
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH V4 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: ipq6018: correct the qrng node name
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V4 0/4] Enable crypto for ipq9574
  • From: Anusha Rao <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• [PATCH v1 1/3] Coresight: Add driver to support for CSR
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 2/3] coresight-tmc: byte-cntr: Add support for streaming interface for ETR
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 3/3] dt-bindings: arm: Adds CoreSight CSR hardware definitions
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v1 0/3] Add support for a streaming interface for TMC ETR
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v1 5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v1 3/5] arm64: dts: qcom: sa8775p: add missing spi nodes
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v1 2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v1 1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c,
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2 2/6] clk: qcom: Update l value configuration for lucid ole and evo plls
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: mux: Remove alt mode parameters from the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] usb: typec: mux: Clean up mux_fwnode_match()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] usb: typec: mux: Remove the "svid" device property checks
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH V2 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V2 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 1/4] dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 4/4] arm64: dts: qcom: ipq9574: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 0/4] Add QFPROM support for few IPQ SoCs
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [v4,12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [v4,02/13] fbdev: Add initializer macros for struct fb_ops
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH V2 1/6] dt-bindings: clock: qcom: Add SM8550 camera clock controller
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: defconfig: Enable sc828x0xp lpasscc clock controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 5/6] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC and reset on SC8280XP
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: Add YAML schemas for LPASSCC and reset on SC8280XP
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2] drm/msm/dpu: clean up dpu_kms_get_clk_rate() returns
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v6 3/8] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 8/8] arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock nodes
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 7/8] arm64: dts: qcom: sc7280: Modify LPASS_MCC reg region size in the lpass_tlmm node
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 5/8] arm64: dts: qcom: sc7280: Add LPASS PIL node
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 4/8] arm64: dts: qcom: sc7280: Add sound node for crd-rev3 board
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 2/8] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 1/8] arm64: dts: qcom: sc7280: Modify lpasscc node name
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH v6 0/8] Add SC7280 audioreach device tree nodes
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: add few more reserved memory region
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: enable the download mode support
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: mfd: qcom,tcsr: add the compatible for IPQ8074
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH 0/3] Enable download mode support for IPQ SOCs
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm: add hdmi cec support
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: adapt to LP855X bindings changes
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: adapt to LP855X bindings changes
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: ipq9574: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: ipq9574: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH v5 0/3] Add support to configure Coresight Dummy subunit
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v5 1/3] Coresight: Add coresight dummy driver
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v5 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: arm: Add support for Coresight dummy trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: ipq9574: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 0/2] mfd: pm8008: fix module autoloading
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 2/2] mfd: pm8008: drop bogus i2c module alias
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: use PINGPONG_NONE to unbind INTF from PP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 12/17] media: venus: firmware: Correct IS_V6() checks
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v3 16/17] media: venus: Use newly-introduced hfi_buffer_requirements accessors
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: ipq9574: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: ipq6018: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 0/3] Add QFPROM support for few IPQ SoCs
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 12/17] media: venus: firmware: Correct IS_V6() checks
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 7/8] arm64: dts: qcom: msm8916: Define regulator constraints next to usage
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• Re: [PATCH v3 07/17] media: venus: core: Assign registers based on VPU version
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v3 06/17] media: venus: hfi_venus: Sanitize venus_boot_core() per-VPU-version
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v4 03/11] coresight-tpdm: Initialize DSB subunit configuration
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• Re: [PATCH v4 02/11] coresight-tpda: Add DSB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v9 0/4] Add MSM8939 SoC support with two devices
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 7/8] arm64: dts: qcom: msm8916: Define regulator constraints next to usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 00/17] Venus QoL / maintainability fixes
  • From: Stanimir Varbanov <stanimir.k.varbanov@xxxxxxxxx>
• Re: [PATCH v6 0/5] Add PCIe EP support for SDX65
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 09/13] net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v6 0/5] Add PCIe EP support for SDX65
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] venus: replace arrary index with enum for supported formats
  • From: Stanimir Varbanov <stanimir.k.varbanov@xxxxxxxxx>
• Re: [PATCH] media: venus: only set H264_TRANSFORM_8X8 on supported hfi versions
  • From: Stanimir Varbanov <stanimir.k.varbanov@xxxxxxxxx>
• Re: [PATCH v3] firmware: qcom_scm: Clear download bit during reboot
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/5] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v14 1/9] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH AUTOSEL 6.3 60/67] drm/msm: Be more shouty if per-process pgtables aren't working
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 29/31] drm/msm: Be more shouty if per-process pgtables aren't working
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 39/43] drm/msm: Be more shouty if per-process pgtables aren't working
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 50/57] drm/msm: Be more shouty if per-process pgtables aren't working
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 09/10] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 10/10] drm/msm/dpu: Tear down DSC datapath on encoder cleanup
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 08/10] drm/msm/dpu: separate DSC flush update out of interface
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 06/10] drm/msm/dpu: add support for DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 03/10] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 07/10] drm/msm/dpu: always clear every individual pending flush mask
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 02/10] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 00/10] add DSC 1.2 dpu supports
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 04/10] drm/msm/dpu: Guard PINGPONG DSC ops behind DPU_PINGPONG_DSC bit
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v14 05/10] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/msm/a6xx: Explain CP_PROTECT_CNTL writes in a6xx_set_cp_protect
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH V2 6/6] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 4/6] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 5/6] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 1/6] dt-bindings: clock: qcom: Add SM8550 camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 2/6] clk: qcom: Update l value configuration for lucid ole and evo plls
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 0/6] Add camera clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: clock: qcom: Add SM8550 camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 0/4] Add camera clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 3/4] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 3/4] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: clk-alpha-pll: Add support for rivian ole pll ops
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v3 03/18] docs: qcom: Add qualcomm minidump guide
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v3 03/18] docs: qcom: Add qualcomm minidump guide
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sm8550: enable PMIC RTC on MTP & QRD boards
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/4] arm64: qcom: sm8550: enable PMIC devices
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: sm8550-qrd: add notification RGB LED
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/4] arm64: dts: qcom: pm8550: add PWM controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Update section header name check
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v3 3/5] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v5 0/5] spi: Add DMA mode support to spi-qcom-qspi
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v6] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PATCH v2 1/4] soundwire: qcom: update status correctly with mask
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 2/4] soundwire: qcom: wait for fifo to be empty before suspend
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 4/4] soundwire: qcom: set clk stop need reset flag at runtime
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 3/4] soundwire: qcom: add software workaround for bus clash interrupt assertion
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 3/5] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 6/6] arm64: defconfig: Enable sc828x0xp lpasscc clock controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC and reset on SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: clock: Add YAML schemas for LPASSCC and reset on SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 0/6] clk: qcom: sc8280xp: add lpasscc reset control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 2/2][next] media: venus: hfi_cmds: Use struct_size() helper
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 3/5] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH][next] media: venus: hfi_cmds: Replace fake flex-array with flexible-array member
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PMI8998
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 3/3] Documentation: leds: Add "rgb:status" path
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2][next] media: venus: hfi_cmds: Replace one-element array with flexible-array member
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH][next] media: venus: Replace one-element arrays with flexible-array members
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: (subset) [PATCH V3 0/6] Incremental patches on minimal boot support
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: Add lpass audio clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: clock: Add YAML schemas for LPASSCC and reset on SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH -next] dmaengine: hidma: Fix cast to smaller integer type warning
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 03/11] coresight-tpdm: Initialize DSB subunit configuration
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 04/11] coresight-tpdm: Add reset node to TPDM node
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 02/11] coresight-tpda: Add DSB dataset support
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: pmk8350: disable ADC by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/11] coresight-tpdm: Initialize DSB subunit configuration
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v4 02/11] coresight-tpda: Add DSB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 02/11] coresight-tpda: Add DSB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6350: Move wifi node to correct place
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom,gcc-msm8953: split to separate schema
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V5 0/3] Add video clock controller driver for SM8450
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974: do not use underscore in node name (again)
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq8074: Add QUP5 SPI node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/8] arm64: dts: qcom: msm8916: Rework regulator constraints
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: ramp_controller: Improve error message for failure in .remove()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V2 0/5] Add GCC and RPMHCC support for sdx75
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 0/5] Add PCIe EP support for SDX65
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc: ipq5332: Use floor ops for SDCC clocks
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V2 0/4] Add Video Clock Controller driver for SM8550
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V2 0/2] Add SoC ID for IPQ5312 and IPQ5302
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V3] arm64: dts: qcom: ipq9574: add few device nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v6 1/1] soc: qcom: mdt_loader: Enhance split binary detection
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 0/4] Add Acer Aspire 1
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: pmk[345]50: enable reboot reason
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmpd: use correct __le32 type
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/3] arm64: dts: qcom: pmi8998: add and enable flash LED controller
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/4] PMU, rpm-stats and IMEM for MSM8226
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/3] dt-bindings: clock: qcom,gcc-sm8250: add missing bi_tcxo_ao clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/3] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add WCD9385 audio-codec
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: smd-rpm: conditionally enable scaling before doing handover
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add BLSP DMAs for I2C
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/4] Add haptics support to Nexus 5 using pwm-vibra driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] Add GPIO support to PM8953 PMIC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom-apq8060: Fix regulator node names
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Introduce RPM Master stats
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/3] arm64: dts: qcom: sm8550: enable DISPCC by default
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974: drop unit addresses from USB phys
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: ipq4019: fix broken NAND controller properties override
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/4] SM8150 Kumano updates
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 01/18] arm64: dts: qcom: ipq6018: correct qrng unit address
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: smd-rpm: Keep one rpm handle for all clocks
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/3] Fix SA8155P RPMPDs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 0/2] SM8350 VIDEOCC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-qcm2290: Mark RCGs shared where applicable
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-edo: Enable Venus
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8996-tone: Enable LPG LEDs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/3] Mark RPMCC XO_A critical
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/2] Fix SM8550 LLCC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: remove oxili_ocmemgx_clk
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-ufi: make UDC dual mode
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: Add missing msm8960 for list of strings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8998: don't use GIC_SPI for SPMI interrupts
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: msm8998: add blsp spi nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] clk: qcom: gcc-ipq6018: drop redundant F define
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 1/4] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/2] Fix EUD dt-binding doc & sc7280 EUD node syntax
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rmtfs: Fix error code in probe()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/2] Qualcomm EUD: Some cleanups
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 v0/4] sa8155p-adp devicetree ethernet cleanup
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 1/1] arm64: dts: qcom: sm6115: Add CPU idle-states
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 2/4] arm: dts: qcom: qdu1000: Add SDHCI node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: PCI: qcom: Add SDX65 SoC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] Change the interrupt from level_low to edge_falling
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 4/4] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v1 2/2] usb: typec: mux: Remove alt mode parameters from the API
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v1 1/2] usb: typec: mux: Clean up mux_fwnode_match()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [v4,12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Sui Jingfeng <15330273260@xxxxxx>
• Re: [PATCH v4 0/3] Use PSCI OS initiated mode for sc7280
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC PATCH v2 11/13] drm/msm/dpu: add a field describing inline rotation to dpu_caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 09/13] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 1/9] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 11/13] drm/msm/dpu: add a field describing inline rotation to dpu_caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 3/5] ARM: Add qcom,usb-hs-phy-msm8960 to qcom,usb-hs-phy.yaml
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH 1/5] ARM: Add label to sleep_clk in qcom-msm8960.dtsi
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH 4/5] ARM: Blindly copy the usb node from apq8064.dtsi
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH 5/5] ARM: Add Samsung Galaxy Express support
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH 2/5] ARM: Add samsung,expressatt to qcom.yaml
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 09/13] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] ARM: Add missing msm8960 for list of strings
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• Re: [RFC PATCH v2 09/13] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v13 10/10] drm/msm/dpu: tear down DSC data path when DSC disabled
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] drm/msm/dpu: add dsc blocks to the catalog of MSM8998 and SC8180X
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v13 01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v13 08/10] drm/msm/dpu: separate DSC flush update out of interface
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v13 07/10] drm/msm/dpu: always clear every individual pending flush mask
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] drm/msm/dpu: fix SSPP register definitions
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [v4,13/13] drm/i915: Implement dedicated fbdev I/O helpers
  • From: Sui Jingfeng <15330273260@xxxxxx>
• Re: [PATCH v2 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [v4,02/13] fbdev: Add initializer macros for struct fb_ops
  • From: Sui Jingfeng <15330273260@xxxxxx>
• Re: [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [v4,01/13] fbdev: Add Kconfig options to select different fb_ops helpers
  • From: Sui Jingfeng <15330273260@xxxxxx>
• Re: [PATCH v2 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [v4,12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Sui Jingfeng <15330273260@xxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: qcom,spmi-pmic: Document pmi8998 charger
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: qcom,spmi-pmic: Document pmi8998 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v14 0/9] Introduce MSM-specific DSC helpers
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v14 1/9] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: clock: qcom: Add SM8550 graphics clock controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: qcom,spmi-pmic: Document pmi8998 charger
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: qcom,spmi-pmic: Document pmi8998 charger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH V2 3/3] arm64: dts: qcom: sm8550: Add graphics clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 0/3] Add graphics clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 2/3] clk: qcom: gpucc-sm8550: Add support for graphics clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: clock: qcom: Add SM8550 graphics clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• EXPORT_SYMBOL_GPL only
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gpucc-sm8550: Add support for graphics clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gpucc-sm8550: Add support for graphics clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v14 7/9] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 3/9] drm/display/dsc: Add drm_dsc_get_bpp_int helper
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 6/9] drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 0/9] Introduce MSM-specific DSC helpers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 8/9] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 4/9] drm/msm/dsi: use DRM DSC helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 1/9] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 5/9] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 9/9] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v14 2/9] drm/display/dsc: add helper to set semi-const parameters
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] usb: typec: mux: Remove alt mode parameters from the API
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable pmi8998 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: sdm845-shift-axolotl: enable pmi8998 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: sdm845-oneplus: enable pmi8998 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: pmi8998: add charger node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: pmi8998: enable rradc by default
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: mfd: qcom,spmi-pmic: Document pmi8998 charger
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 0/6] Enable PMI8998 charger on supported devices
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 7/9] HID: i2c-hid: Support being a panel follower
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v13 00/24] Drivers for Gunyah hypervisor
  • From: Alex Bennée <alex.bennee@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v13 00/10] add DSC 1.2 dpu supports
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v2 4/4] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 1/4] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 3/4] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 2/4] soc: qcom: smem: introduce qcom_smem_get_msm_id()
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] drm: fdinfo memory stats
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v5 0/7] drm: fdinfo memory stats
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] drm: fdinfo memory stats
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v5 3/7] drm/msm: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v5 0/7] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v5 6/7] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v12 00/25] Drivers for Gunyah hypervisor
  • From: Alex Bennée <alex.bennee@xxxxxxxxxx>
• [PATCH v10 2/6] iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 6/6] iommu/dma: Use a large flush queue and timeout for shadow_on_flush
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 1/6] s390/ism: Set DMA coherent mask
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 4/6] s390/pci: Use dma-iommu layer
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v10 3/6] s390/pci: prepare is_passed_through() for dma-iommu
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH V2 1/4] clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 3/4] clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V2 0/4] Add Video Clock Controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCHv3] media: venus: provide video device lock
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: clk-alpha-pll: Add support for lucid ole pll ops
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 3/4] clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCHv3] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH V5 3/3] arm64: dts: qcom: sm8450: Add video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V5 1/3] dt-bindings: clock: qcom: Add SM8450 video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V5 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V5 0/3] Add video clock controller driver for SM8450
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH V4 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCHv2] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• Re: [PATCH] Revert "regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS""
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• Re: [PATCH] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH v1 2/2] usb: typec: mux: Remove alt mode parameters from the API
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] usb: typec: mux: Clean up mux_fwnode_match()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 0/2] usb: typec: mux: Remove the "svid" device property checks
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• Re: [PATCH 01/13] firmware: qcom: scm: Introduce pas_metadata context
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Use PSCI OS initiated mode for sc7280
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [RFC] drm/msm/dp: Allow attaching a drm_panel
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 0/3] Enable IPQ9574 TSENS support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] mtd: rawnand: qcom: Add support for read, write, erase exec_ops
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] mtd: rawnand: qcom: Add support for param_page read exec_ops
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 13/13] drm/i915: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 11/13] drm/fb-helper: Export helpers for marking damage areas
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 10/13] drm/tegra: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 09/13] drm/omapdrm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 03/13] drm/armada: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 08/13] drm/msm: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 05/13] drm/gma500: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 01/13] fbdev: Add Kconfig options to select different fb_ops helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 00/13] drm/fbdev: Remove DRM's helpers for fbdev I/O
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 06/13] drm/radeon: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 02/13] fbdev: Add initializer macros for struct fb_ops
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 07/13] drm/fbdev-dma: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v4 04/13] drm/exynos: Use regular fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 1/5] mtd: rawnand: qcom: Implement exec_op()
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066
  • From: Tim Jiang <quic_tjiang@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 0/5] dma: don't set chancnt
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v13 00/24] Drivers for Gunyah hypervisor
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v13 05/24] mailbox: Add Gunyah message queue mailbox
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/3] Coresight: Add coresight dummy driver
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Carl/Pranjal as QAIC reviewers
  • From: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@xxxxxxxxxxx>
• Re: [PATCH V3 2/4] clk: qcom: gcc-ipq9574: Enable crypto clocks
  • From: Anusha Canchi <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH V3 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes
  • From: Anusha Canchi <quic_anusha@xxxxxxxxxxx>
• Re: [PATCH V23 2/3] misc: dcc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] drm/msm/dpu: switch dpu_encoder to use drm_debugfs_add_file()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V23 0/3] misc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH] venus: replace arrary index with enum for supported formats
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH] media: venus: provide video device lock
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• [PATCH v8 2/2] power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  • From: Caleb Connolly via B4 Relay <devnull+caleb.connolly.linaro.org@xxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  • From: Caleb Connolly via B4 Relay <devnull+caleb.connolly.linaro.org@xxxxxxxxxx>
• [PATCH v8 0/2] power: supply: introduce support for the Qualcomm smb2 charger
  • From: Caleb Connolly via B4 Relay <devnull+caleb.connolly.linaro.org@xxxxxxxxxx>
• Re: [PATCH v2 3/3] drm/msm/dpu: switch dpu_encoder to use drm_debugfs_add_file()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drm/msm/dpu: switch dpu_encoder to use drm_debugfs_add_file()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] drm/msm/dpu: switch dpu_encoder to use drm_debugfs_add_file()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: dts: qcom: apq8074-dragonboard: enable coincell charger
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] drm/msm/dpu: drop (mostly) unused DPU_NAME_SIZE define
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/msm/dpu: drop dpu_encoder_phys_ops::late_register()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v6] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v7] drm/msm: stop storing the array of CRTCs in struct msm_drm_private
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] drm/msm/dp: no need to disable irq after devm_request_irq()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 6/6] ARM: dts: qcom: msm8226: Add ocmem
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 0/6] Add MSM8226 OCMEM support plus some extra OCMEM driver fixes
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 5/6] soc: qcom: ocmem: Add support for msm8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 0/3] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 1/3] arm64: dts: qcom: Add PMI632 PMIC
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 3/3] Documentation: leds: Add "rgb:status" path
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v5 0/2] enable HDP plug/unpulg interrupts at hpd_enable/disable
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 2/2] drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v5 1/2] drm/msm/dp: no need to disable irq after devm_request_irq()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: (subset) [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add PCIe0
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/5] QTI RB2 features
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Accept power-domains for GPUCC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 7/9] HID: i2c-hid: Support being a panel follower
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 9/9] arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panels
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 6/9] HID: i2c-hid: Make suspend and resume into helper functions
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 4/9] HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 8/9] HID: i2c-hid: Do panel follower work on the system_wq
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 5/9] HID: i2c-hid: Rearrange probe() to power things up later
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 3/9] drm/panel: Add a way for other devices to follow panel state
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/9] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/9] dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed panels
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/7] drm/msm/dpu: simplify DPU encoder init
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/7] drm/msm/dpu: simplify DPU encoder init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v3 11/12] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [Freedreno] [PATCH v2 0/7] drm/msm/dpu: simplify DPU encoder init
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/5] arm64: defconfig: Build display clock controller driver for QCM2290
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: defconfig: Build Global Clock Controller driver for QCM2290
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] arm64: defconfig: Build MSM power manager driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 1/1] soc: qcom: mdt_loader: Enhance split binary detection
  • From: Gokul Krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx>
• [PATCH 4/5] arm64: defconfig: Build display clock controller driver for QCM2290
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH 2/5] arm64: defconfig: Build Global Clock Controller driver for QCM2290
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH 5/5] arm64: defconfig: Build SM6115 display and GPU clock controller drivers
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH 3/5] arm64: defconfig: Build interconnect driver for QCM2290
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH 1/5] arm64: defconfig: Build MSM power manager driver
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH 0/5] arm64: defconfig: build some essential Qualcomm platform drivers
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Accept power-domains for GPUCC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Carl/Pranjal as QAIC reviewers
  • From: Carl Vanderlip <quic_carlv@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add Carl/Pranjal as QAIC reviewers
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2] accel/qaic: initialize ret variable to 0
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 0/5] accel/qaic fixes for 6.4
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: add module parameter for PSR
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] Revert "drm/msm/dp: set self refresh aware based on PSR support"
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v4 04/11] coresight-tpdm: Add reset node to TPDM node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 02/11] coresight-tpda: Add DSB dataset support
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v5 06/12] drm/msm/dpu: Add SM6350 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/7] drm/msm/dpu: simplify DPU encoder init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 02/11] phy: qcom-qmp-ufs: populate offsets configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>