Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533aeafc4..44a67c9274bd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -741,9 +741,9 @@ gcc: clock-controller@100000 {
<&pcie0_lane>,
<&pcie1_lane>,
<0>,
- <&ufs_mem_phy_lanes 0>,
- <&ufs_mem_phy_lanes 1>,
- <&ufs_mem_phy_lanes 2>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo",
"sleep_clk",
@@ -4064,7 +4064,7 @@ ufs_mem_hc: ufshc@1d84000 {
<0 0x01d88000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -4114,10 +4114,8 @@ ufs_mem_hc: ufshc@1d84000 {
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8450-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref", "ref_aux", "qref";
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4125,17 +4123,11 @@ ufs_mem_phy: phy@1d87000 {
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
sdhc_2: mmc@8804000 {
--
2.39.2
