Re: [Freedreno] [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 26 May 2023 at 01:42, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> On 5/25/2023 3:30 PM, Dmitry Baryshkov wrote:
> > On Fri, 26 May 2023 at 00:40, Jeykumar Sankaran
> > <quic_jeykumar@xxxxxxxxxxx> wrote:
> >> On 5/22/2023 2:45 PM, Dmitry Baryshkov wrote:
> >>> There is no point in having a single enum (and a single array) for both
> >>> DPU < 7.0 and DPU >= 7.0 interrupt registers. Instead define a single
> >>> enum and two IRQ address arrays.
> >>>
> >>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >>> ---
> >>>    .../msm/disp/dpu1/catalog/dpu_7_0_sm8350.h    |  1 +
> >>>    .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h    |  1 +
> >>>    .../msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h  |  1 +
> >>>    .../msm/disp/dpu1/catalog/dpu_8_1_sm8450.h    |  1 +
> >>>    .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h    |  1 +
> >>>    .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  2 +
> >>>    .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 82 +++++++++++++------
> >>>    .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 28 ++++---
> >>>    8 files changed, 79 insertions(+), 38 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> >>> index 3c1b2c13398d..320cfa4be633 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
> >>> @@ -15,6 +15,7 @@ static const struct dpu_caps sm8350_dpu_caps = {
> >>>        .has_dim_layer = true,
> >>>        .has_idle_pc = true,
> >>>        .has_3d_merge = true,
> >>> +     .has_7xxx_intr = true,
> >>>        .max_linewidth = 4096,
> >>>        .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >>>    };
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> >>> index 5d894cbb0a62..9306c7a115e9 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
> >>> @@ -13,6 +13,7 @@ static const struct dpu_caps sc7280_dpu_caps = {
> >>>        .qseed_type = DPU_SSPP_SCALER_QSEED4,
> >>>        .has_dim_layer = true,
> >>>        .has_idle_pc = true,
> >>> +     .has_7xxx_intr = true,
> >>>        .max_linewidth = 2400,
> >>>        .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >>>    };
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> >>> index c3f1ae000a21..fc1e17c495f0 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
> >>> @@ -15,6 +15,7 @@ static const struct dpu_caps sc8280xp_dpu_caps = {
> >>>        .has_dim_layer = true,
> >>>        .has_idle_pc = true,
> >>>        .has_3d_merge = true,
> >>> +     .has_7xxx_intr = true,
> >>>        .max_linewidth = 5120,
> >>>        .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >>>    };
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> >>> index 86c2e68ebd2c..eb72411c16db 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
> >>> @@ -14,6 +14,7 @@ static const struct dpu_caps sm8450_dpu_caps = {
> >>>        .has_src_split = true,
> >>>        .has_dim_layer = true,
> >>>        .has_idle_pc = true,
> >>> +     .has_7xxx_intr = true,
> >>>        .has_3d_merge = true,
> >>>        .max_linewidth = 5120,
> >>>        .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> >>> index 85dc34458b88..8209ca317bdc 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> >>> @@ -15,6 +15,7 @@ static const struct dpu_caps sm8550_dpu_caps = {
> >>>        .has_dim_layer = true,
> >>>        .has_idle_pc = true,
> >>>        .has_3d_merge = true,
> >>> +     .has_7xxx_intr = true,
> >>>        .max_linewidth = 5120,
> >>>        .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> >>>    };
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> >>> index 677048cc3b7d..72530ebb0ae6 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> >>> @@ -351,6 +351,7 @@ struct dpu_rotation_cfg {
> >>>     * @has_dim_layer      dim layer feature status
> >>>     * @has_idle_pc        indicate if idle power collapse feature is supported
> >>>     * @has_3d_merge       indicate if 3D merge is supported
> >>> + * @has_7xxx_intr      indicate that INTF/IRQs use addressing for DPU 7.0 and greater
> >>
> >> I see the requirement to distinguish feature support based on the DPU
> >> version in more than one series. Is it a good idea to bring in the DPU
> >> version info in chipset catalog? This will relieve us from maintaining
> >> such version flags for individual HW sub-blocks.
> >
> > This would not play well with the rest of the driver. The driver
> > usually does not compute features by DPU revision. Instead it lists
> > feature flags.
> >
>
> So I am increasingly seeing examples such as data_compress, widebus
> where it looks like version based enablement in the code will be just
> more efficient. For example.
>
> if (DPU_MAJOR_VER > xxx && DPU_MAJOR_VER < yyy)
>         enable data_compress;
>
> will be much easier to do than adding catalog entry for each chipset for
> these bit level details of registers especially when some of these
> cannot be considered as catalog features.

I'm fine with such approach for as long as it doesn't result in something like:
if (DPU_MAJOR_VER > xxx &&
   !(DPU_MAJOR_VER == yy && DPU_MINOR_VER == zz))

>
> Thats why I am wondering that, we dont need to add the revision based
> cfg picking anymore and rely on the compatible but in the dpu_mdss_cfg
> perhaps add a .core_rev.
>
> We will still stick to catalog based feature bits when its actually
> indeed a feature.
>
> Thoughts?
>
> >>
> >> Thanks and Regards,
> >> Jeykumar S.
> >>
> >>>     * @max_linewidth      max linewidth for sspp
> >>>     * @pixel_ram_size     size of latency hiding and de-tiling buffer in bytes
> >>>     * @max_hdeci_exp      max horizontal decimation supported (max is 2^value)
> >>> @@ -364,6 +365,7 @@ struct dpu_caps {
> >>>        bool has_dim_layer;
> >>>        bool has_idle_pc;
> >>>        bool has_3d_merge;
> >>> +     bool has_7xxx_intr;
> >>>        /* SSPP limits */
> >>>        u32 max_linewidth;
> >>>        u32 pixel_ram_size;
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> >>> index 0776b0f6df4f..a03d826bb9ad 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> >>> @@ -51,11 +51,9 @@ struct dpu_intr_reg {
> >>>    };
> >>>
> >>>    /*
> >>> - * struct dpu_intr_reg -  List of DPU interrupt registers
> >>> - *
> >>> - * When making changes be sure to sync with dpu_hw_intr_reg
> >>> + * dpu_intr_set_legacy -  List of DPU interrupt registers for DPU <= 6.x
> >>>     */
> >>> -static const struct dpu_intr_reg dpu_intr_set[] = {
> >>> +static const struct dpu_intr_reg dpu_intr_set_legacy[] = {
> >>>        [MDP_SSPP_TOP0_INTR] = {
> >>>                INTR_CLEAR,
> >>>                INTR_EN,
> >>> @@ -121,57 +119,78 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> >>>                MDP_AD4_INTR_EN_OFF(1),
> >>>                MDP_AD4_INTR_STATUS_OFF(1),
> >>>        },
> >>> -     [MDP_INTF0_7xxx_INTR] = {
> >>> +};
> >>> +
> >>> +/*
> >>> + * dpu_intr_set_7xxx -  List of DPU interrupt registers for DPU >= 7.0
> >>> + */
> >>> +static const struct dpu_intr_reg dpu_intr_set_7xxx[] = {
> >>> +     [MDP_SSPP_TOP0_INTR] = {
> >>> +             INTR_CLEAR,
> >>> +             INTR_EN,
> >>> +             INTR_STATUS
> >>> +     },
> >>> +     [MDP_SSPP_TOP0_INTR2] = {
> >>> +             INTR2_CLEAR,
> >>> +             INTR2_EN,
> >>> +             INTR2_STATUS
> >>> +     },
> >>> +     [MDP_SSPP_TOP0_HIST_INTR] = {
> >>> +             HIST_INTR_CLEAR,
> >>> +             HIST_INTR_EN,
> >>> +             HIST_INTR_STATUS
> >>> +     },
> >>> +     [MDP_INTF0_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(0),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(0),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(0)
> >>>        },
> >>> -     [MDP_INTF1_7xxx_INTR] = {
> >>> +     [MDP_INTF1_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(1),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(1),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(1)
> >>>        },
> >>> -     [MDP_INTF1_7xxx_TEAR_INTR] = {
> >>> +     [MDP_INTF1_TEAR_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(1),
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_EN(1),
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(1)
> >>>        },
> >>> -     [MDP_INTF2_7xxx_INTR] = {
> >>> +     [MDP_INTF2_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(2),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(2),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(2)
> >>>        },
> >>> -     [MDP_INTF2_7xxx_TEAR_INTR] = {
> >>> +     [MDP_INTF2_TEAR_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(2),
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_EN(2),
> >>>                MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(2)
> >>>        },
> >>> -     [MDP_INTF3_7xxx_INTR] = {
> >>> +     [MDP_INTF3_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(3),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(3),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(3)
> >>>        },
> >>> -     [MDP_INTF4_7xxx_INTR] = {
> >>> +     [MDP_INTF4_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(4),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(4),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(4)
> >>>        },
> >>> -     [MDP_INTF5_7xxx_INTR] = {
> >>> +     [MDP_INTF5_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(5),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(5),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(5)
> >>>        },
> >>> -     [MDP_INTF6_7xxx_INTR] = {
> >>> +     [MDP_INTF6_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(6),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(6),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(6)
> >>>        },
> >>> -     [MDP_INTF7_7xxx_INTR] = {
> >>> +     [MDP_INTF7_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(7),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(7),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(7)
> >>>        },
> >>> -     [MDP_INTF8_7xxx_INTR] = {
> >>> +     [MDP_INTF8_INTR] = {
> >>>                MDP_INTF_REV_7xxx_INTR_CLEAR(8),
> >>>                MDP_INTF_REV_7xxx_INTR_EN(8),
> >>>                MDP_INTF_REV_7xxx_INTR_STATUS(8)
> >>> @@ -216,19 +235,19 @@ irqreturn_t dpu_core_irq(struct msm_kms *kms)
> >>>                return IRQ_NONE;
> >>>
> >>>        spin_lock_irqsave(&intr->irq_lock, irq_flags);
> >>> -     for (reg_idx = 0; reg_idx < ARRAY_SIZE(dpu_intr_set); reg_idx++) {
> >>> +     for (reg_idx = 0; reg_idx < MDP_INTR_MAX; reg_idx++) {
> >>>                if (!test_bit(reg_idx, &intr->irq_mask))
> >>>                        continue;
> >>>
> >>>                /* Read interrupt status */
> >>> -             irq_status = DPU_REG_READ(&intr->hw, dpu_intr_set[reg_idx].status_off);
> >>> +             irq_status = DPU_REG_READ(&intr->hw, intr->intr_set[reg_idx].status_off);
> >>>
> >>>                /* Read enable mask */
> >>> -             enable_mask = DPU_REG_READ(&intr->hw, dpu_intr_set[reg_idx].en_off);
> >>> +             enable_mask = DPU_REG_READ(&intr->hw, intr->intr_set[reg_idx].en_off);
> >>>
> >>>                /* and clear the interrupt */
> >>>                if (irq_status)
> >>> -                     DPU_REG_WRITE(&intr->hw, dpu_intr_set[reg_idx].clr_off,
> >>> +                     DPU_REG_WRITE(&intr->hw, intr->intr_set[reg_idx].clr_off,
> >>>                                     irq_status);
> >>>
> >>>                /* Finally update IRQ status based on enable mask */
> >>> @@ -285,7 +304,11 @@ static int dpu_hw_intr_enable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
> >>>        assert_spin_locked(&intr->irq_lock);
> >>>
> >>>        reg_idx = DPU_IRQ_REG(irq_idx);
> >>> -     reg = &dpu_intr_set[reg_idx];
> >>> +     reg = &intr->intr_set[reg_idx];
> >>> +
> >>> +     /* Is this interrupt register supported on the platform */
> >>> +     if (WARN_ON(!reg->en_off))
> >>> +             return -EINVAL;
> >>>
> >>>        cache_irq_mask = intr->cache_irq_mask[reg_idx];
> >>>        if (cache_irq_mask & DPU_IRQ_MASK(irq_idx)) {
> >>> @@ -334,7 +357,7 @@ static int dpu_hw_intr_disable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
> >>>        assert_spin_locked(&intr->irq_lock);
> >>>
> >>>        reg_idx = DPU_IRQ_REG(irq_idx);
> >>> -     reg = &dpu_intr_set[reg_idx];
> >>> +     reg = &intr->intr_set[reg_idx];
> >>>
> >>>        cache_irq_mask = intr->cache_irq_mask[reg_idx];
> >>>        if ((cache_irq_mask & DPU_IRQ_MASK(irq_idx)) == 0) {
> >>> @@ -368,10 +391,10 @@ static void dpu_clear_irqs(struct dpu_kms *dpu_kms)
> >>>        if (!intr)
> >>>                return;
> >>>
> >>> -     for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
> >>> +     for (i = 0; i < MDP_INTR_MAX; i++) {
> >>>                if (test_bit(i, &intr->irq_mask))
> >>>                        DPU_REG_WRITE(&intr->hw,
> >>> -                                     dpu_intr_set[i].clr_off, 0xffffffff);
> >>> +                                     intr->intr_set[i].clr_off, 0xffffffff);
> >>>        }
> >>>
> >>>        /* ensure register writes go through */
> >>> @@ -386,10 +409,10 @@ static void dpu_disable_all_irqs(struct dpu_kms *dpu_kms)
> >>>        if (!intr)
> >>>                return;
> >>>
> >>> -     for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
> >>> +     for (i = 0; i < MDP_INTR_MAX; i++) {
> >>>                if (test_bit(i, &intr->irq_mask))
> >>>                        DPU_REG_WRITE(&intr->hw,
> >>> -                                     dpu_intr_set[i].en_off, 0x00000000);
> >>> +                                     intr->intr_set[i].en_off, 0x00000000);
> >>>        }
> >>>
> >>>        /* ensure register writes go through */
> >>> @@ -421,10 +444,10 @@ u32 dpu_core_irq_read(struct dpu_kms *dpu_kms, int irq_idx)
> >>>
> >>>        reg_idx = DPU_IRQ_REG(irq_idx);
> >>>        intr_status = DPU_REG_READ(&intr->hw,
> >>> -                     dpu_intr_set[reg_idx].status_off) &
> >>> +                     intr->intr_set[reg_idx].status_off) &
> >>>                DPU_IRQ_MASK(irq_idx);
> >>>        if (intr_status)
> >>> -             DPU_REG_WRITE(&intr->hw, dpu_intr_set[reg_idx].clr_off,
> >>> +             DPU_REG_WRITE(&intr->hw, intr->intr_set[reg_idx].clr_off,
> >>>                                intr_status);
> >>>
> >>>        /* ensure register writes go through */
> >>> @@ -448,6 +471,11 @@ struct dpu_hw_intr *dpu_hw_intr_init(void __iomem *addr,
> >>>        if (!intr)
> >>>                return ERR_PTR(-ENOMEM);
> >>>
> >>> +     if (m->caps->has_7xxx_intr)
> >>> +             intr->intr_set = dpu_intr_set_7xxx;
> >>> +     else
> >>> +             intr->intr_set = dpu_intr_set_legacy;
> >>> +
> >>>        intr->hw.blk_addr = addr + m->mdp[0].base;
> >>>
> >>>        intr->total_irqs = nirq;
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> >>> index 1f2dabc54c22..f329d6d7f646 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> >>> @@ -23,24 +23,29 @@ enum dpu_hw_intr_reg {
> >>>        MDP_INTF3_INTR,
> >>>        MDP_INTF4_INTR,
> >>>        MDP_INTF5_INTR,
> >>> +     MDP_INTF6_INTR,
> >>> +     MDP_INTF7_INTR,
> >>> +     MDP_INTF8_INTR,
> >>>        MDP_INTF1_TEAR_INTR,
> >>>        MDP_INTF2_TEAR_INTR,
> >>>        MDP_AD4_0_INTR,
> >>>        MDP_AD4_1_INTR,
> >>> -     MDP_INTF0_7xxx_INTR,
> >>> -     MDP_INTF1_7xxx_INTR,
> >>> -     MDP_INTF1_7xxx_TEAR_INTR,
> >>> -     MDP_INTF2_7xxx_INTR,
> >>> -     MDP_INTF2_7xxx_TEAR_INTR,
> >>> -     MDP_INTF3_7xxx_INTR,
> >>> -     MDP_INTF4_7xxx_INTR,
> >>> -     MDP_INTF5_7xxx_INTR,
> >>> -     MDP_INTF6_7xxx_INTR,
> >>> -     MDP_INTF7_7xxx_INTR,
> >>> -     MDP_INTF8_7xxx_INTR,
> >>>        MDP_INTR_MAX,
> >>>    };
> >>>
> >>> +/* compatibility */
> >>> +#define MDP_INTF0_7xxx_INTR MDP_INTF0_INTR
> >>> +#define MDP_INTF1_7xxx_INTR MDP_INTF1_INTR
> >>> +#define MDP_INTF2_7xxx_INTR MDP_INTF2_INTR
> >>> +#define MDP_INTF3_7xxx_INTR MDP_INTF3_INTR
> >>> +#define MDP_INTF4_7xxx_INTR MDP_INTF4_INTR
> >>> +#define MDP_INTF5_7xxx_INTR MDP_INTF5_INTR
> >>> +#define MDP_INTF6_7xxx_INTR MDP_INTF6_INTR
> >>> +#define MDP_INTF7_7xxx_INTR MDP_INTF7_INTR
> >>> +#define MDP_INTF8_7xxx_INTR MDP_INTF8_INTR
> >>> +#define MDP_INTF1_7xxx_TEAR_INTR MDP_INTF1_TEAR_INTR
> >>> +#define MDP_INTF2_7xxx_TEAR_INTR MDP_INTF2_TEAR_INTR
> >>> +
> >>>    #define DPU_IRQ_IDX(reg_idx, offset)        (reg_idx * 32 + offset)
> >>>
> >>>    /**
> >>> @@ -60,6 +65,7 @@ struct dpu_hw_intr {
> >>>        u32 total_irqs;
> >>>        spinlock_t irq_lock;
> >>>        unsigned long irq_mask;
> >>> +     const struct dpu_intr_reg *intr_set;
> >>>
> >>>        struct {
> >>>                void (*cb)(void *arg, int irq_idx);



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux